Search

In conventional electric measurement devices, measurements are made on the use of electrical energy as a whole where consumers can only see information on the results of the use of electrical energy by looking at the total power consumption amount indicated on the meter kWh meter. Based on the above problems, the author aims to raise the title "Design of Monitoring System of Electricity Energy Usage using LabVIEW". The LabVIEW program has the ability to measure, monitor and store data quickly and accurately. With this tool will be realized a design system monitoring the use of electrical energy in real time through the computer instead of kWH meter analog or digital. This concept is one of the energy management solutions that enable consumers to obtain statistical data on electrical energy consumption in detail. From the results of monitoring the use of loads, obtained very good results in monitoring the usage of energy, which in this case using household burden.

The problem of using Power System Stabilizer (PSS) in generator excitation is how to determine optimal PSS parameter. To overcome these problems, the authors use a method of intelligent bats based algorithm to design PSS. Bat Algorithm is an algorithm that works based on bat behavior in search of food source. Correlation with this research is, food sources sought by bats represent as PSS parameters to be optimized. Bat's algorithm will work based on a specified destination function, namely Integral Time Absolute Error (ITAE). In this research will be seen the deviation of velocity and rotor angle of each generator, in case of disturbance in bakaru generator. The analysis results show that the uncontrolled system produces a large overshoot oscillation, and after the addition of PSS oscillation control equipment can be muted. So that the overshoot and settling time of each generator can be reduced and the generator can quickly go to steady state condition.