Search

The tasseled cap transformation (TCT) is a widely used technique for reducing remote sensing multispectral data into three tasseled cap (TC) components – brightness, greenness, and wetness – while retaining essential information for various applications. We derived the TCT coefficients for 7-band SDGSAT-1 Multispectral Imager data for the first time by leveraging established Sentinel-2 TCT coefficients. This was achieved through Principal Component Analysis (PCA) for dimensional reduction of SDGSAT-1 data and the Procrustes Analysis (PA) method for aligning the principal components’ eigenvectors with the directions of Sentinel-2 TC components. A comparison between the new SDGSAT-1 coefficients and those of Sentinel-2 and Landsat-8 revealed a strong correlation, demonstrating similar characteristics for brightness, greenness, and wetness components. Given the established applications of TCT, the SDGSAT-1 TCT could significantly facilitate the use of SDGSAT-1 Multispectral Imager data for vegetation monitoring, water body analysis, and change detection. This study not only presents the derivation of SDGSAT-1 TCT coefficients but also highlights the effectiveness of the PA method in deriving TC wetness component coefficients that are sensitive to water bodies and vegetation, even for multispectral data lacking the moisture-sensitive shortwave-infrared (SWIR) band.

Aerosol Optical Depth (AOD) is vital for assessing air quality and climate. Nighttime lights (NTL) provide a new data source for urban AOD inversion, but current NTL data suffer from low spatial resolution, limiting detailed AOD studies in smaller urban areas and hindering high-precision AOD algorithms. This study introduces methods for retrieving AOD using Glimmer Imager (GLI) data from the newly launched SDGSAT-1. Three methods were proposed: the standard deviation method, look-up-table method, and collaborative inversion method with VIIRS Day Night Band (DNB) data. Applied to Beijing, these methods produced a 10 m resolution AOD product. The look-up-table method achieved the highest correlation (R = 0.8876) compared to the standard deviation (R = 0.8224) and collaborative inversion (R = 0.8322) methods. The look-up-table method performed best with ample data, while the collaborative inversion method proved more reliable with limited data. These findings demonstrate the effectiveness of SDGSAT-1 GLI data in accurately retrieving nighttime AOD, offering significant potential for monitoring urban pollution.

Urban development under a changing climate pose threats to heritage conservation, necessitating vigilant monitoring of human activities and natural disasters. This study proposes a dynamic monitoring and risk assessment technology aimed at identifying interferences to heritage sites along the Silk Road. The characterization of land use was investigated, and changes within the protected areas were extracted using an object-based deep learning method to reveal instances of human interference. Nighttime light changes were analyzed to assess socio-economic development in heritage regions and cross-referenced with results indicating human interference to examine the relationship between urban development and heritage conservation. Additionally, we extracted various environmental and climate variables to evaluate the risk of flood disasters for these heritage sites. The findings suggest that heritage sites along the Silk Road are generally in good condition. Nevertheless, the substantial increase in construction land highlights challenges in heritage conservation and economic development. This study highlights the importance of vegetation coverage and water diversion measures to prevent floods, emphasizing the effectiveness of space observation in identifying risks. Such observation can help the government manage and protect valuable sites, advancing heritage protection within the framework of sustainable development goals (SDGs).

ABSTRACTClassification of individual tree species (ITS) is critical for fine-scale forest surveys. However, it is difficult to obtain the complete and high-precision data needed for ITS classification in large areas. Lower spatial resolution time-series imagery is more accessible than other types of imagery and contains rich phenological information. In this study, after delineating individual tree crowns using a 0.2-m unmanned aerial vehicle (UAV) image, we used 3-m time-series imagery and a new 3DLSTM model to identify ITS at the Gaofeng Forest Farm in Guangxi Province, China. The 3DLSTM ITS classification model combines three-dimensional convolutional neural network (3D CNN) and long short-term memory (LSTM) models; thus, spatial, multiband, and time-series information can be extracted simultaneously to identify ITS more accurately. In this study, when only 3-m Planet time-series imagery was used for classification, the 3DLSTM model offered an ITS classification accuracy of 92.68%, outperforming two ITS classifiers (DenseNet or AlexNet model) based on one individual image. Moreover, the 3DLSTM model was better at identifying broad-leaved tree species than other deep-learning models. The experimental results proved that ITS classification could be significantly improved using only 3DLSTM and time-series images, offering the possibility of classifying large-scale ITS at a low cost.

The quantification of the extent and dynamics of land-use changes is a key metric employed to assess the progress toward several Sustainable Development Goals (SDGs) that form part of the United Nations 2030 Sustainable Development Agenda. In terms of anthropogenic factors threatening the conservation of heritage properties, such a metric aids in the assessment of achievements toward heritage sustainability solving the problem of insufficient data availability. Therefore, in this study, 589 cultural World Heritage List (WHL) properties from 115 countries were analyzed, encompassing globally distributed and statistically significant samples of “monuments and groups of buildings” (73.2%), “sites” (19.3%), and “cultural landscapes” (7.5%). Land-cover changes in the WHL properties between 2015 and 2020 were automatically extracted from big data collections of high-resolution satellite imagery accessed via Google Earth Engine using intelligent remote sensing classification. Sustainability indexes (SIs) were estimated for the protection zones of each property, and the results were employed, for the first time, to assess the progress of each country toward SDG Target 11.4. Despite the apparent advances in SIs (10.4%), most countries either exhibited steady (20.0%) or declining (69.6%) SIs due to limited cultural investigations and enhanced negative anthropogenic disturbances. This study confirms that land-cover changes are among serious threats for heritage conservation, with heritage in some countries wherein the need to address this threat is most crucial, and the proposed spatiotemporal monitoring approach is recommended.

Recent developments in deep learning (DL) techniques have provided a series of new methods for land cover classification. However, most DL-based methods do not consider the rich spatial association of land cover classes embedded in remote sensing images. In this research, a deep relearning method based on the recurrent neural network (DRRNN) is proposed for land cover classification. The relearning approach has great potential to improve classification, which has never been used in DL-based land cover classification. To utilize the spatial association of the pixels’ information classes, a class correlated feature (CCF) is first extracted in a local window from an initial classification result. This feature can reflect both the spatial autocorrelation and spatial arrangement of land cover classes. Since the recurrent neural network (RNN) is designed to process sequential data, the CCF is formed as a feature sequence, allowing RNN to model the dependency between class labels. The relearning process is then applied to iteratively classify remote sensing images based on the CCF and spectral-spatial feature. At each relearning iteration, the CCF is learned from the previous classification result until a stopping condition is satisfied. This method was tested on five remote sensing images with different sensors and diverse environments. It was observed that noise in the classification result can be filtered by considering spatial autocorrelation, and misclassified areas can be corrected by incorporating spatial arrangement in the relearning process. The classification results indicate that compared to other state-of-the-art DL methods, the proposed method consistently achieves the highest accuracy.

As a World Cultural Heritage site with sacred landscape featuring an exceptional range of Buddhist art and architecture, much attention has been focused on the sustainable development of Bagan (Myanmar). Particularly, the monitoring of landscape surface subsidence and monument instability is of great importance to the protection and development planning of the Bagan heritage site. In this study, we applied high resolution TerraSAR-X imagery acquired from 2019 to 2020 for deformation monitoring based on the small baseline subset (SBAS) and persistent scatterer synthetic aperture radar interferometry (PSInSAR) approaches. We identified several hotspots and pagodas with displacement anomalies linked to land cover change and previous earthquakes. The cross comparison between SBAS and PSInSAR and the precision of height estimates derived by PSInSAR indicated a millimetric precision of the derived deformation products. The combination of the two multi-temporal SAR interferometry approaches satisfies the two-scale monitoring requirements from landscapes to monuments, particularly for large-scale World Heritage sites. The non-contact monitoring method has potential when traditional methods using field accessibility and surveillance are constrained.

Accurate identification of individual tree species (ITS) is crucial to forest management. However, current ITS identification methods are mainly based on traditional image features or deep learning. Traditional image features are more interpretative, but the generalization and robustness of such methods are inferior. In contrast, deep learning based approaches are more generalizable, but the extracted features are not interpreted; moreover, the methods can hardly be applied to limited sample sets. In this study, to further improve ITS identification, typical spectral and texture image features were weighted to assist deep learning models for ITS identification. To validate the hybrid models, two experiments were conducted; one on the dense forests of the Huangshan Mountains, Anhui Province and one on the Gaofeng forest farm, Guangxi Province, China. The experimental results demonstrated that with the addition of image features, different deep learning ITS identification models, such as DenseNet, AlexNet, U-Net, and LeNet, with different limited sample sizes (480, 420, 360), were all enhanced in both study areas. For example, the accuracy of DenseNet model with a sample size of 480 were improved to 87.67% from 85.41% in Huangshan. This hybrid model can effectively improve ITS identification accuracy, especially for UAV aerial imagery or limited sample sets, providing the possibility to classify ITS accurately in sample-poor areas.

Object-based image analysis (OBIA), which has been commonly used for land cover and land use classification, may encounter challenges when satellite images’ spatial resolution achieves at the sub-meter level. An image object may exhibit spectral heterogeneity, causing traditional object-level statistical measures such as mean values of the pixels in an object not suited to represent the feature of the object. Additionally, an image object may have strong spatial association with its surroundings. Traditional OBIA only considers spatial features of individual object, but ignoring spatial arrangement or spatial association between objects. This paper proposes a new OBIA method by integrating within-object spectral variability and between-object spatial association. The within-object spectral variability is captured by the histograms of the pixels in an object across multispectral bands to reflect the heterogeneity of their pixel values. Based on this, the initial classification result is obtained using non-parametric curve matching methods. Then, the between-object spatial association is represented by curves derived from the frequency of pairwise classes in four main directions, also in the form of curves. The curves now composed of both the histograms of spectral feature and the class pair frequency of spatial feature are then fused for another curve matching based classification. This recurrent process is repeated and the spatial association is recaptured from the previous classification result at each iteration until a stopping criterion is satisfied. The curve matching classification method based on histograms of spectral feature is superior to traditional OBIA based on only object-level statistical measures since it fully characterizes spectral variability in the objects. The between-object spatial association works as a spatial filter that considers spatial arrangement of classes in a neighborhood. The developed method is especially suitable for classifying high spatial resolution (HSR) images with land cover/land use classes in typical urban areas.

Automatically generating a building footprint from an airborne LiDAR point cloud is an active research topic because of its widespread usage in numerous applications. This paper presents an efficient and automated workflow for generating building footprints from pre-classified LiDAR data. In this workflow, LiDAR points that belong to the building category are first segmented into multiple clusters by applying the grid-based DBSCAN clustering algorithm. Each cluster contains the points of an individual building. Then, the outermost points of each building are extracted, on which the recursive convex hull algorithm is applied to generate the initial outline of each building. Since LiDAR points are irregularly distributed, the initial building outline contains irregular zig-zag shapes. In order to achieve a regularized building footprint that is close to the true building boundary, a signal-based regularization algorithm is developed. The initial outline is first transformed into a signal, which can reveal the wholistic geometric structure of the building outline after applying a denoising procedure. By analyzing the denoised signal, the locations of corners are identified, and the regularized building footprint is generated. The performance of the proposed workflow is tested and evaluated using two datasets that have different point densities and building types. The qualitative assessment reveals that the proposed workflow has a satisfying performance in generating building footprints even for building with complex structures. The quantitative assessment compares the performance of signal-based regularization with existing regularization methods using the 149 buildings contained in the test dataset. The experimental result shows the proposed method has achieved superior results based on a number of commonly used accuracy metrics.

Accurate and efficient individual tree species (ITS) classification is the basis of fine forest resource management. It is a challenge to classify individual tree species in dense forests using remote sensing imagery. In order to solve this problem, a new ITS classification method was proposed in this study, in which a hierarchical convolutional neural network (H-CNN) model and multi-temporal high-resolution Google Earth images were employed. In an experiment conducted in a forest park in Beijing, China, GE images of several significant phenological phases of broad-leaved forests, namely, before and after the mushrooming period, the growth period, and the wilting period, were selected, and ITS classifications based on these images along with several typical CNN models and the H-CNN model were conducted. In the experiment, the classification accuracy of the multitemporal images was higher by 7.08–12.09% than those of the single-temporal images, and the H-CNN model offered an OA accuracy 2.66–3.72% higher than individual CNN models, demonstrating that multitemporal images rich in the phenological features of individual tree species, together with a hierarchical CNN model, can effectively improve ITS classification.

Semantic segmentation is a critical problem for many remote sensing (RS) image applications. Benefiting from large-scale pixel-level labeled data and the continuous evolution of deep neural network architectures, the performance of semantic segmentation approaches has been constantly improved. However, deploying a well-trained model on unseen and diverse testing environments remains a major challenge: a large gap between data distributions in train and test domains results in severe performance loss, while manual dense labeling is costly and not scalable. To this end, we proposed an unsupervised domain adaptation framework for RS image semantic segmentation that is both practical and effective. The framework is supported by the consistency principle, including the cycle consistency in the input space and self-supervised consistency in the training stage. Specifically, we introduce cycle-consistent generative adversarial networks to reduce the discrepancy between source and target distributions by translating one into the other. The translated source data then drive a pipeline of supervised semantic segmentation model training. We enforce consistency of model predictions across target image transformations in order to provide self-supervision for the unlabeled target data. Experiments and extensive ablation studies demonstrate the effectiveness of the proposed approach on two challenging benchmarks, on which we achieve up to 9.95% and 7.53% improvements in accuracy over the state-of-the-art methods, respectively.

Individual tree species (ITS) classification is one of the key issues in forest resource management. Compared with traditional classification methods, deep learning networks may yield ITS classification results with higher accuracy. In this research, the U-Net and ResNet networks were combined to form a Res-UNet network by changing the structure of the convolutional layer to the residual structure in ResNet based on the framework of the U-Net model. In addition, a second Res-UNet network named Res-UNet2 was further constructed to explore the effect of the stacking of residual structures on network performance. The Res-UNet2 model structure is similar to that of the Res-UNet model, but the convolutional layer in the U-Net model is created with a double-layer residual structure. The two networks proposed in this work were used to classify ITSs in WorldView-3 images of the Huangshan Mountains, Anhui Province, China, acquired in March 2019. The resulting ITS map was compared with the classification results obtained with U-Net and ResNet. The total classification accuracy of the ResU-Net network reached 94.29% and was higher than that generated by the U-Net and ResNet models, verifying that the ResU-Net model can more accurately classify ITSs. The Res-UNet2 model performed poorly compared to Res-UNet, indicating that stacking the residual modules in ResNet does not achieve an accuracy improvement.

The spatial distribution of forest stands is one of the fundamental properties of forests. Timely and accurately obtained stand distribution can help people better understand, manage, and utilize forests. The development of remote sensing technology has made it possible to map the distribution of tree species in a timely and accurate manner. At present, a large amount of remote sensing data have been accumulated, including high-spatial-resolution images, time-series images, light detection and ranging (LiDAR) data, etc. However, these data have not been fully utilized. To accurately identify the tree species of forest stands, various and complementary data need to be synthesized for classification. A curve matching based method called the fusion of spectral image and point data (FSP) algorithm was developed to fuse high-spatial-resolution images, time-series images, and LiDAR data for forest stand classification. In this method, the multispectral Sentinel-2 image and high-spatial-resolution aerial images were first fused. Then, the fused images were segmented to derive forest stands, which are the basic unit for classification. To extract features from forest stands, the gray histogram of each band was extracted from the aerial images. The average reflectance in each stand was calculated and stacked for the time-series images. The profile curve of forest structure was generated from the LiDAR data. Finally, the features of forest stands were compared with training samples using curve matching methods to derive the tree species. The developed method was tested in a forest farm to classify 11 tree species. The average accuracy of the FSP method for ten performances was between 0.900 and 0.913, and the maximum accuracy was 0.945. The experiments demonstrate that the FSP method is more accurate and stable than traditional machine learning classification methods.

The emerging satellite videos provide the opportunity to detect moving objects and track their trajectories, which were not possible for remotely sensed imagery with limited temporal resolution. So far, most studies using satellite video data have been concentrated on traffic monitoring through detecting and tracking moving cars, whereas the studies on other moving objects such as airplanes are limited. In this paper, an integrated method for monitoring moving airplanes from a satellite video is proposed. First, we design a normalized frame difference labeling (NFDL) algorithm to detect moving airplanes, which adopts a non-recursive strategy to deliver stable detection throughout the whole video. Second, the template matching (TM) technique is utilized for tracking the detected moving airplanes in the frame sequence by improved similarity measures (ISMs) with better rotation invariance and model drift suppression ability. Template matching with improved similarity measures (TM-ISMs) is further implemented to handle the leave-the-scene problem. The developed method is tested on a satellite video to detect and track eleven moving airplanes. Our NFDL algorithm successfully detects all the moving airplanes with the highest F1 score of 0.88 among existing algorithms. The performance of TM-ISMs is compared with both its traditional counterparts and other state-of-the-art tracking algorithms. The experimental results show that TM-ISMs can handle both rotation and leave-the-scene problems. Moreover, TM-ISMs achieve a very high tracking accuracy of 0.921 and the highest tracking speed of 470.62 frames per second.

Due to spatial inhomogeneity of land-cover types and spectral confusions among them, land-cover maps suffer from misclassification errors. While much research has focused on improving image classification by re-processing source images with more advanced algorithms and/or using images of finer resolution, there is rarely any systematic work on re-processing existing maps to increase their accuracy. We propose refining existing maps to achieve accuracy gains by exploring and utilizing relationships between reference data, which are often already available or can be collected, and map data. For this, we make novel use of canonical correspondence analysis (CCA) to analyze reference-map class co-occurrences to facilitate probabilistic re-classification of map classes in CCA ordination space, a synthesized feature space constrained by map class occurrence patterns. Experiments using GlobeLand30 land-cover (2010) over Wuhan, China were carried out using reference sample data collected previously for accuracy assessment in the same area. Reference sample data were stratified by map classes and their spatial heterogeneity. To examine effects of model-training sample size on refinements, three subset samples (360, 720, and 1480 pixels) were selected from a pool of 3000 sample pixels (the full training sample). Logistic regression modeling was employed as a baseline method for comparisons. Performance evaluation was based on a test sample of 1020 pixels using a strict and relaxed definitions of agreement between reference classification and map classification, resulting in measures of types I and II, respectively. It was found that the CCA-based method is more accurate than logistic regression in general. With increasing sample sizes, refinements generally lead to greater accuracy gains. Heterogeneous sub-strata usually see greater accuracy gains than in homogeneous sub-strata. It was also revealed that accuracy gains in specific strata (map classes and sub-strata) are related to strata refinability. Regarding CCA-based refinements, a relatively small sample of 360 pixels achieved a 3% gain in both overall accuracy (OA) and F0.01 score (II). By using a selective strategy in which only refinable strata of cultivated land and forest are included in refinement, accuracy gains are further increased, with 5–11% gains in users’ accuracies (UAs) (II) and 4–10% gains in F0.01 scores (II). In conclusion, on condition of refinability, map refinement is well worth pursuing, as it increases accuracy of existing maps, extends utility of reference data, facilitates uncertainty-informed map representation, and enhances our understanding about relationships between reference data and map data and about their synthesis.

In recent years, satellites capable of capturing videos have been developed and launched to provide high definition satellite videos that enable applications far beyond the capabilities of remotely sensed imagery. Moving object detection and moving object tracking are among the most essential and challenging tasks, but existing studies have mainly focused on vehicles. To accurately detect and then track more complex moving objects, specifically airplanes, we need to address the challenges posed by the new data. First, slow-moving airplanes may cause foreground aperture problem during detection. Second, various disturbances, especially parallax motion, may cause false detection. Third, airplanes may perform complex motions, which requires a rotation-invariant and scale-invariant tracking algorithm. To tackle these difficulties, we first develop an Improved Gaussian-based Background Subtractor (IPGBBS) algorithm for moving airplane detection. This algorithm adopts a novel strategy for background and foreground adaptation, which can effectively deal with the foreground aperture problem. Then, the detected moving airplanes are tracked by a Primary Scale Invariant Feature Transform (P-SIFT) keypoint matching algorithm. The P-SIFT keypoint of an airplane exhibits high distinctiveness and repeatability. More importantly, it provides a highly rotation-invariant and scale-invariant feature vector that can be used in the matching process to determine the new locations of the airplane in the frame sequence. The method was tested on a satellite video with eight moving airplanes. Compared with state-of-the-art algorithms, our IPGBBS algorithm achieved the best detection accuracy with the highest F1 score of 0.94 and also demonstrated its superiority on parallax motion suppression. The P-SIFT keypoint matching algorithm could successfully track seven out of the eight airplanes. Based on the tracking results, movement trajectories of the airplanes and their dynamic properties were also estimated.

In current individual tree crown (ITC) delineation methods for high-resolution multispectral imagery, either a spectral band or a brightness component of the multispectral image is employed in delineation with reference to edges or shapes of crowns, whereas spectra of tree crowns are seldom taken into account. Such methods normally perform well in coniferous forests with obvious between-crown shadows, but fail in dense deciduous or mixed forests, in which tree crowns are close to each other, between-crown shadows and boundaries are unobvious, whereas adjacent tree crowns may be of distinguishable spectra. In order to effectively delineate crowns in dense deciduous or mixed forests, a new ITC delineation method using both brightness and spectra of the image is proposed in this study. In this method, a morphological gradient map of the image is first generated, treetops of multi-scale crowns are extracted from the gradient map and refined regarding the spectral differences between neighboring crowns, the gradient map is segmented using a watershed approach with treetops as markers, and the resulting segmentation map is refined to yield a crown map. Evaluated on images of a rainforest and a deciduous forest, the proposed method more accurately delineated adjacent broad-leaved tree crowns with similar brightness but different spectra than the other two typical ITC delineation algorithms, achieving a delineation accuracy of up to 76% in the rainforest and 63% in the deciduous forest.

This paper develops a novel hybrid model that integrates three spatial contexts into probabilistic classifiers for remote sensing classification. First, spatial pattern is introduced using multiple-point geostatistics (MPGs) to characterize the general distribution and arrangement of land covers. Second, spatial correlation is incorporated using spatial covariance to quantify the dependence between pixels. Third, an edge-preserving filter based on the Sobel mask is introduced to avoid the over-smoothing problem. These three types of contexts are combined with the spectral information from the original image within a higher-order Markov random field (MRF) framework for classification. The developed model is capable of classifying complex and diverse land cover types by allowing effective anisotropic filtering of the image while retaining details near edges. Experiments with three remote sensing images from different sources based on three probabilistic classifiers obtained results that significantly improved classification accuracies when compared with other popular contextual classifiers and most state-of-the-art methods.

As a source of data continuity between Landsat and SPOT, Sentinel-2 is an Earth observation mission developed by the European Space Agency (ESA), which acquires 13 bands in the visible and near-infrared (VNIR) to shortwave infrared (SWIR) range. In this study, a Sentinel-2A imager was utilized to assess its ability to perform lithological classification in the Shibanjing ophiolite complex in Inner Mongolia, China. Five conventional machine learning methods, including artificial neural network (ANN), k-nearest neighbor (k-NN), maximum likelihood classification (MLC), random forest classifier (RFC), and support vector machine (SVM), were compared in order to find an optimal classifier for lithological mapping. The experiment revealed that the MLC method offered the highest overall accuracy. After that, Sentinel-2A image was compared with common multispectral data ASTER and Landsat-8 OLI (operational land imager) for lithological mapping using the MLC method. The comparison results showed that the Sentinel-2A imagery yielded a classification accuracy of 74.5%, which was 2.5% and 5.08% higher than those of the ASTER and OLI imagery, respectively, indicating that Sentinel-2A imagery is adequate for lithological discrimination, due to its high spectral resolution in the VNIR to SWIR range. Moreover, different data combinations of Sentinel-2A + ASTER + DEM (digital elevation model) and OLI + ASTER + DEM data were tested on lithological mapping using the MLC method. The best mapping result was obtained from Sentinel-2A + ASTER + DEM dataset, demonstrating that OLI can be replaced by Sentinel-2A, which, when combined with ASTER, can achieve sufficient bandpasses for lithological classification.

Numerous pansharpening methods were proposed in recent decades for fusing low-spatial-resolution multispectral (MS) images with high-spatial-resolution (HSR) panchromatic (PAN) bands to produce fused HSR MS images, which are widely used in various remote sensing tasks. The effect of misregistration between MS and PAN bands on quality of fused products has gained much attention in recent years. An improved method for misaligned MS and PAN imagery is proposed, through two improvements made on a previously published method named RMI (reduce misalignment impact). The performance of the proposed method was assessed by comparing with some outstanding fusion methods, such as adaptive Gram-Schmidt and generalized Laplacian pyramid. Experimental results show that the improved version can reduce spectral distortions of fused dark pixels and sharpen boundaries between different image objects, as well as obtain similar quality indexes with the original RMI method. In addition, the proposed method was evaluated with respect to its sensitivity to misalignments between MS and PAN bands. It is certified that the proposed method is more robust to misalignments between MS and PAN bands than the other methods.

The segmentation of a high spatial resolution remote sensing image is a critical step in geographic object-based image analysis (GEOBIA). Evaluating the performance of segmentation without ground truth data, i.e., unsupervised evaluation, is important for the comparison of segmentation algorithms and the automatic selection of optimal parameters. This unsupervised strategy currently faces several challenges in practice, such as difficulties in designing effective indicators and limitations of the spectral values in the feature representation. This study proposes a novel unsupervised evaluation method to quantitatively measure the quality of segmentation results to overcome these problems. In this method, multiple spectral and spatial features of images are first extracted simultaneously and then integrated into a feature set to improve the quality of the feature representation of ground objects. The indicators designed for spatial stratified heterogeneity and spatial autocorrelation are included to estimate the properties of the segments in this integrated feature set. These two indicators are then combined into a global assessment metric as the final quality score. The trade-offs of the combined indicators are accounted for using a strategy based on the Mahalanobis distance, which can be exhibited geometrically. The method is tested on two segmentation algorithms and three testing images. The proposed method is compared with two existing unsupervised methods and a supervised method to confirm its capabilities. Through comparison and visual analysis, the results verified the effectiveness of the proposed method and demonstrated the reliability and improvements of this method with respect to other methods.

Since WorldView-2 (WV-2) images are widely used in various fields, there is a high demand for the use of high-quality pansharpened WV-2 images for different application purposes. With respect to the novelty of the WV-2 multispectral (MS) and panchromatic (PAN) bands, the performances of eight state-of-art pan-sharpening methods for WV-2 imagery including six datasets from three WV-2 scenes were assessed in this study using both quality indices and information indices, along with visual inspection. The normalized difference vegetation index, normalized difference water index, and morphological building index, which are widely used in applications related to land cover classification, the extraction of vegetation areas, buildings, and water bodies, were employed in this work to evaluate the performance of different pansharpening methods in terms of information presentation ability. The experimental results show that the Haze- and Ratio-based, adaptive Gram-Schmidt, Generalized Laplacian pyramids (GLP) methods using enhanced spectral distortion minimal model and enhanced context-based decision model methods are good choices for producing fused WV-2 images used for image interpretation and the extraction of urban buildings. The two GLP-based methods are better choices than the other methods, if the fused images will be used for applications related to vegetation and water-bodies.

This study explores the ability of WorldView-2 (WV-2) imagery for bamboo mapping in a mountainous region in Sichuan Province, China. A large area of this place is covered by shadows in the image, and only a few sampled points derived were useful. In order to identify bamboos based on sparse training data, the sample size was expanded according to the reflectance of multispectral bands selected using the principal component analysis (PCA). Then, class separability based on the training data was calculated using a feature space optimization method to select the features for classification. Four regular object-based classification methods were applied based on both sets of training data. The results show that the k-nearest neighbor (k-NN) method produced the greatest accuracy. A geostatistically-weighted k-NN classifier, accounting for the spatial correlation between classes, was then applied to further increase the accuracy. It achieved 82.65% and 93.10% of the producer’s and user’s accuracies respectively for the bamboo class. The canopy densities were estimated to explain the result. This study demonstrates that the WV-2 image can be used to identify small patches of understory bamboos given limited known samples, and the resulting bamboo distribution facilitates the assessments of the habitats of giant pandas.