Search

Plant-based beverages have gained consumers' attention for being the main substitutes for dairy milk, especially for people with lactose intolerance, milk allergies, and a prevalence of hypercholesterolemia. Moreover, there is a growing demand for a more sustainable diet and plant-based lifestyle due to concerns related to animal wellbeing, environmental impacts linked to dairy production, and the rising cost of animal-derived foods. However, there are some factors that restrict plant-based beverage consumption, including their nutritional quality and poor sensory profile. In this context, fermentation processes can contribute to the improvement of their sensory properties, nutritional composition, and functional/bioactive profile. In particular, the fermentation process can enhance flavor compounds (e.g., acetoin and acetic acid) while decreasing off-flavor components (e.g., hexanal and hexanol) in the substrate. Furthermore, it enhances the digestibility and bioavailability of nutrients, leading to increased levels of vitamins (e.g., ascorbic acid and B complex), amino acids (e.g., methionine and tryptophan), and proteins, while simultaneously decreasing the presence of anti-nutritional factors (e.g., phytic acid and saponins). In contrast, plant-based fermented beverages have been demonstrated to possess diverse bioactive compounds (e.g., polyphenols and peptides) with different biological properties (e.g., antioxidant, anti-inflammatory, and antihypertensive). Therefore, this article provides an overview of plant-based fermented beverages including their production, technological aspects, and health benefits.

The term biopolymer refers to materials obtained by chemically modifying natural biological substances or producing them through biotechnological processes. They are biodegradable, biocompatible and non-toxic. Due to these advantages, biopolymers have wide applications in conventional cosmetics and new trends and have emerged as essential ingredients that function as rheological modifiers, emulsifiers, film-formers, moisturizers, hydrators, antimicrobials and, more recently, materials with metabolic activity on skin. Developing approaches that exploit these features is a challenge for formulating skin, hair and oral care products and dermatological formulations. This article presents an overview of the use of the principal biopolymers used in cosmetic formulations and describes their sources, recently derived structures, novel applications and safety aspects of the use of these molecules., (© 2023 Society of Cosmetic Scientists and Societe Francaise de Cosmetologie.)

Food bioactive peptides are well recognized for their health benefits such as antimicrobial, antioxidant, and antihypertensive benefits, among others. Their drug-like behavior has led to their potential use in targeting skin-related aging factors like the inhibition of enzymes related with the skin-aging process. In this study, canary seed peptides (CSP) after simulated gastrointestinal digestion (<3 kDa) were fractioned by RP-HPLC and their enzyme-inhibition activity towards elastase and tyrosinase was evaluated in vitro. CSP inhibited elastase (IC 50 = 6.2 mg/mL) and tyrosinase (IC 50 = 6.1 mg/mL), while the hydrophobic fraction-VI (0.2 mg/mL) showed the highest inhibition towards elastase (93%) and tyrosinase (67%). The peptide fraction with the highest inhibition was further characterized by a multilevel in silico workflow, including physicochemical descriptor calculations, antioxidant activity predictions, and molecular dynamics-ensemble docking towards elastase and tyrosinase. To gain insights into the skin permeation process during molecular dynamics simulations, based on their docking scores, five peptides (GGWH, VPPH, EGLEPNHRVE, FLPH, and RPVNKYTPPQ) were identified to have favorable intermolecular interactions, such as hydrogen bonding of polar residues (W, H, and K) to lipid polar groups and 2-3 Å van der Waals close contact of hydrophobic aliphatic residues (P, V, and L). These interactions can play a critical role for the passive insertion of peptides into stratum corneum model skin-membranes, suggesting a promising application of CSP for skin-aging treatments.

Papaya is one of the most consumed fruits in the world; however, tissue damage caused by cuts quickly leads to its decay. Therefore, this study aimed to prepare and characterize lemon oil and curcumin nanocapsules to evaluate their capacity for preserving fresh-cut papaya. Lemon essential oil and curcumin nanocapsules were prepared using ethyl cellulose (EC) and poly-(ε-caprolactone) (PCL) by the emulsification-diffusion method coupled with ultrasound. The particles had sizes smaller than 120 nm, with polydispersity indices below 0.25 and zeta potentials exceeding -12 mV, as confirmed by scanning electron microscopy. The nanoparticles remained stable for 27 days, with sedimentation being the instability mechanism observed. These nanoparticles were employed to coat fresh-cut papaya, which was stored for 17 days. The results demonstrated their remarkable efficacy in reducing the respiration rate. Furthermore, nanocapsules maintained the pH and acidity levels of the papayas for an extended period. The lemon oil/EC nanocapsule treatment retained the color better. Additionally, all systems exhibited the ability to minimize texture loss associated with reduced pectin methylesterase activity. Finally, the nanocapsules showed a notable reduction in polyphenol oxidase activity correlating with preserving total phenolic compounds in the fruit. Therefore, the lemon oil and curcumin nanoparticles formed using EC and PCL demonstrated their effectiveness in preserving fresh-cut 'Maradol' papaya.

Solid lipid nanoparticles (SLN) based on candelilla wax were prepared using the hot homogenization technique. The resulting suspension had monomodal behavior with a particle size of 809-885 nm; polydispersity index < 0.31, and zeta potential of -3.5 mV 5 weeks after monitoring. The films were prepared with SLN concentrations of 20 and 60 g/L, each with a plasticizer concentration of 10 and 30 g/L; the polysaccharide stabilizers used were either xanthan gum (XG) or carboxymethyl cellulose (CMC) at 3 g/L. The effects of temperature, film composition, and relative humidity on the microstructural, thermal, mechanical, and optical properties, as well as the water vapor barrier, were evaluated. Higher amounts of SLN and plasticizer gave the films greater strength and flexibility due to the influence of temperature and relative humidity. The water vapor permeability (WVP) was lower when 60 g/L of SLN was added to the films. The arrangement of the SLN in the polymeric networks showed changes in the distribution as a function of the concentrations of the SLN and plasticizer. The total color difference (ΔE) was greater when the content of the SLN was increased, with values of 3.34-7.93. Thermal analysis showed an increase in the melting temperature when a higher SLN content was used, whereas a higher plasticizer content reduced it. Edible films with the most appropriate physical properties for the packaging, shelf-life extension, and improved quality conservation of fresh foods were those made with 20 g/L of SLN, 30 g/L of glycerol, and 3 g/L of XG., Competing Interests: The authors declare no conflicts of interest.

Consumers today demand the use of natural additives and preservatives in all fresh and processed foods, including meat and meat products. Meat, however, is highly susceptible to oxidation and microbial growth that cause rapid spoilage. Essential oils are natural preservatives used in meat and meat products. While they provide antioxidant and antimicrobial properties, they also present certain disadvantages, as their intense flavor can affect the sensory properties of meat, they are subject to degradation under certain environmental conditions, and have low solubility in water. Different methods of incorporation have been tested to address these issues. Solutions suggested to date include nanotechnological processes in which essential oils are encapsulated into a lipid or biopolymer matrix that reduces the required dose and allows the formation of modified release systems. This review focuses on recent studies on applications of nano-encapsulated essential oils as sources of natural preservation systems that prevent meat spoilage. The studies are critically analyzed considering their effectiveness in the nanostructuring of essential oils and improvements in the quality of meat and meat products by focusing on the control of oxidation reactions and microbial growth to increase food safety and ensure innocuity.

In recent decades, bioactive peptides have become an emerging field of interest in the scientific community as well as the food, pharmaceutical, and cosmetics industries. A growing body of research indicates that consumption of bioactive peptides may play a vital role in health through their broad spectrum of bioactivity such as antioxidant, antihypertensive, antimicrobial, anti-inflammatory, immunomodulatory, and anti-proliferative activities. In addition, bioactive peptides can be used as food preservatives due to their antimicrobial and antioxidant activities. However, some factors limit their nutraceutical and commercial applications, including easy chemical degradation ( e.g. , pH, enzymatic), food matrix interaction, low water-solubility, hygroscopicity, and potential bitter taste. Bearing that in mind, the encapsulation of bioactive peptides in different materials can help overcome these challenges. Studies have demonstrated that encapsulation of bioactive peptides increases their bioactivity, improves their stability, sensory properties, increases solubility, and decreases hygroscopicity. However, there is limited scientific evidence about the bioavailability and food matrix interactions of encapsulated peptides. Besides, the diverse colloidal systems used to encapsulate bioactive peptides have shown stability and good encapsulation efficiency. This review provides an overview of current advances in the encapsulation of bioactive peptides, considering the technology, developments, and innovations in the last lustrum., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Clenbuterol is present in animal tissues and organs and, therefore, potentially present in gelatin derived from animal sources. The objective of this study was to develop a method for identify an quantify traces of clenbuterol in gelatin and jellies. The clenbuterol calibration curve showed linearity in the range of 20-1000 pg mL -1 . The detection and quantification limits were 5 pg g -1 and 10 pg g -1 , respectively. The recovery of the analyte ranged from 93.4 to 98.7% with an intra-day RSD% (n = 4) of 1.25%-3.25%, and an inter-day RSD% (n = 12) of 0.5%-2.25%, with good linearity (R 2  = 0.99). The method developed and validated was successfully applied in 54 gelatin samples, 57.4% of which showed clenbuterol. This UHPLC-MS/MS method combines high sensitivity with good selectivity and short chromatographic run time., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The aim of this work was to obtain pH-dependent nanofibers with an electrospinning technique as a novel controlled release system for the treatment of periodontal disease (PD). Cellulose acetate phthalate (CAP) was selected as a pH-sensitive and antimicrobial polymer. The NF was optimized according to polymeric dispersion variables, polymer, and drug concentration, and characterized considering morphology, diameter, entrapment efficiency (EE), process efficiency (PE), thermal properties, and release profiles. Two solvent mixtures were tested, and CHX-CAP-NF prepared with acetone/ethanol at 12% w/v of the polymer showed a diameter size of 934 nm, a uniform morphology with 42% of EE, and 55% of PE. Meanwhile, CHX-CAP-NF prepared with acetone/methanol at 11% w/v of polymer had a diameter of 257 nm, discontinuous nanofiber morphology with 32% of EE, and 40% of PE. EE and PE were dependent on the polymer concentration and the drug used in the formulation. Studies of differential scanning calorimetry (DSC) showed that the drug was dispersed in the NF matrix. The release profiles of CHX from CHX-CAP-NF followed Fickian diffusion dependent on time (t 0.43-0.45 ), suggesting a diffusion-erosion process and a matrix behavior. The NF developed could be employed as a novel drug delivery system in PD.

The nanoencapsulation of thyme essential oil has been greatly important in food science, given its remarkable antioxidant and antimicrobial capacity. However, its analysis in storage has not been established in terms of physical stability, antioxidant capacity, and release studies. In this paper, chitosan-thyme oil nanocapsules were prepared by the ionic gelation method. These were characterized for differential calorimetry, release kinetic, and infrared spectroscopy. The chitosan-thyme oil nanocapsules were stored at 4 and 25 °C for 5 weeks, the changes in particle size, zeta potential, stability (diffuse reflectance), and antioxidant capacity were analyzed and associated with nanocapsules' functionality. The results show that the storage time and temperature significantly modify the particle size (keeping the nano-size throughout the storage), the release of the bioactive was Fickian with t 0.193 according to Korsmery & Peppas and best described by Higuchi model associated with changes in the zeta potential from 8 mV to -11 mV at 4 °C. The differential scanning calorimetry and infrared spectroscopy results confirm the good integration of the components. The antioxidant capacity revealed a direct relationship with residual oil concentration with a decrease in the ABTS test of 15% at 4 °C and 37% at 25 °C. The residual bioactive content was 77% at 4 °C and 62% at 25 °C, confirming nanoencapsulation effectiveness. The present investigation provides helpful information so that these systems can be applied in food conservation.

The objective of this study was to evaluate the effectiveness of a combination of UV-C disinfection treatment and a nano-coating lemon essential oil nanocapsules. The nanocapsules were prepared by ionic gelation with an alginate-pectin wall and the lemon essential oil had a particle size of 219 ± 22 nm and a zeta potential of -7.91 ± 0.18 mV. The lemon essential oil had an encapsulation efficiency of 68.19 ± 1.18%. The fresh-cut cucumber was stored for 15 days at 4 °C. Six formulations of nanocapsules were evaluated, and hydroxypropyl methylcellulose was used as matrix polysaccharide in four coatings. Three formulations were treated with UV-C at 4.5 kJ/m 2 . The results showed that the combination of UV-C and nano-coatings (lemon essential oil = 200 mg/L) increased the shelf life by up to 15 days. Using UV-C and nano-coatings, the ∆E value was 7.12 at the end of the storage period, while the Control samples had an ∆E of 28.1. With nano-coating treatment, the amount of polyphenols decreased by 23% within 9 days. In contrast, with combined UV-C and nano-coating treatment, the amount of polyphenols was reduced by 38.84% within 15 days. The antioxidant capacity remained stable at 459 μmol TE/100 g for the fresh product when the combined treatment was used. A good correlation was also observed between the increasing of the fruit's shelf life and decreasing of its enzymatic activity. The inclusion of UV-C treatment contributed to the reduction in the initial total bacteria at 3.30 log CFU/g and its combination with nano-coatings helped in the control of microbial growth during storage.

In this study, a Venturi tube is proposed as an efficient static mixer incorporated into a continuous recirculation system for obtaining solid lipid nanoparticles (SLN) of monoolein. The device's operating principle consists of producing a turbulent flux in the throat of a Venturi tube. Taking advantage of this effect SLN of monoolein were obtained by rapid diffusion of the organic phase into the aqueous phase (stabilizer), causing lipid aggregation on the nanometric particles. The main aim of the present study was to evaluate the critical factors for obtaining the SLN of monoolein in order to control the independent variables of this methodology. A Box-Behnken design was used to study such independent variables (factors) as injection rate (X1), recirculation rate (X2), and stabilizer (X3) on the dependent variables; namely, process yield (Y1), particle size (Y2), polydispersity index (Y3) and zeta potential (Y4). The optimum operating conditions for preparing SLN were: injection rate, 1.6 mL/min; recirculation rate, 4.2 L/min; and stabilizer concentration, 1.0 w/v, with a value of D  = 0.84. The predicted responses of the particle size were 212.0 nm, with a polydispersity index of 0.21, a zeta potential of -19.9 mV, and a process yield of 96.0%. Under the same operating condition, SLN formed with different lipids and stabilizers were obtained with nanometric size and zeta potential of ∼ -30.0 mV. Results show that the Venturi tube method is an innovative and versatile technique for preparing SLN of nanometric size with high process yields through a turbulent flow.

The purpose of the study was to develop a novel, directly compressible, co-processed excipient capable of providing a controlled-release drug system for the pharmaceutical industry. A co-processed powder was formed by adsorption of solid lipid nanoparticles (SLN) as a controlled-release film onto a functional excipient, in this case, dicalcium phosphate dihydrate (DPD), for direct compression (Di-Tab ® ). The co-processed excipient has advantages: easy to implement; solvent-free; industrial scaling-up; good rheological and compressibility properties; and the capability to form an inert platform. Six different batches of Di-Tab ® :SLN weight ratios were prepared (4:0.6, 3:0.6, 2:0.6, 1:0.6, 0.5:0.6, and 0.25:0.6). BCS class III ranitidine hydrochloride was selected as a drug model to evaluate the mixture's controlled-release capabilities. The co-processed excipients were characterized in terms of powder rheology and dissolution rate. The best Di-Tab ® :SLN ratio proved to be 2:0.6, as it showed high functionality with good flow and compressibility properties (Carr Index = 16 ± 1, Hausner Index = 1.19 ± 0.04). This ratio could control release for up to 8 h, so it fits the ideal profile calculated based on biopharmaceutical data. The compressed systems obtained using this powder mixture behave as a matrix platform in which Fickian diffusion governs the release. The Higuchi model can explain their behavior.

From an integral perspective, nanotechnology can be used to care for the environment by improving current preparation methods and facilitating industrial scale-up. This article discusses the implementation of techniques for obtaining polystyrene nanoparticles (PSN), as an added value, using an emulsification and solvent displacement method (EDSD); the solvent displacement is a novel modification to the emulsion-diffusion methodology, where the diffusion is done directly on the emulsion, which allows concentrated dispersions that facilitate direct use to be obtained, eliminating the dilution with water and the recovery of water by additional processes. The solvent was recovered by reduced pressure, which is class 3, conforming to ICH, and making this method sustainable. The optimization of this process has not been reported elsewhere. This approach made it possible to obtain highly-concentrated nanoparticles while allowing the reuse of the solvent. A scaling proposal is presented that integrates the conditioning of the solid urban waste material called expanded polystyrene (EPS) foam that constitutes a serious environmental problem both nationally and globally. Hence, the article presents an alternative to the recycling of EPS, and a methodology in the context of green chemistry, because solvent is recovered to prepare other batches. The PSN obtained from this waste material had a minimum particle size of 225.8 nm, with a polydispersion index of 0.158. Process performance was 97.1%, and the solvent was recovered at a maximum rate of 85%. The morphology of the PSN was spherical and uniform, with a smooth surface., Competing Interests: There are no conflicts to declare by any of the authors., (This journal is © The Royal Society of Chemistry.)

Nanoparticles have shown overall beneficial effects in drug administration. Specifically, solid lipid nanoparticles (SLN) have emerged as an alternative to polymer-based systems. However, the oral administration of SLN, the first choice for conventional medications, has not been addressed due to the taboo surrounding the complicated transit that this delivery route entails. This review focuses on the encapsulation of drugs into SLN as a strategy for improving oral administration. Examples of applications of SLN to enhance the absorption and bioavailability of poorly-soluble drugs and protect acid-labile active molecules are discussed. This work also emphasizes the importance of developing SLN-based systems to treat health issues such as neurological diseases and cancer, and combat antibiotic resistance, three significant and increasingly common current public health problems. The review sections clarify how SLN can improve bioavailability, target therapeutic agents, and reduce side effects.

The release kinetics, stability, and antioxidant capacity of thyme essential oil polymeric nanocapsules as a function of encapsulating (poly-ε-caprolactone and ethylcellulose) and stabilizing (polyvinyl alcohol and Pluronic ® F-127) polymers were established. Samples were evaluated in terms of particle size, zeta potential, release kinetics, calorimetry, infrared spectra, antioxidant capacity, and diffuse reflectance. The particle size obtained was below 500 nm in all cases, ensuring nanometric size. Zeta potential as a function of the stabilizing polymer. Encapsulation efficiency was higher in the samples that contained ethyl cellulose (around 70%), associated with its affinity for the molecules contained in the essential oil. Differential scanning calorimetry revealed a strong dependence on the encapsulating polymers as a function of the melting temperatures obtained. Infrared spectra confirmed that the polymeric nanocapsules had the typical bands of the aromatic groups of thyme essential oil. The antioxidant capacity evaluated is a function exclusively of the active content in the nucleolus of the nanocapsules. Nanoencapsulation was not a significant factor. Diffuse reflectance revealed high physical stability of the dispersions related directly to the particle size and zeta potential obtained (either by ionic or steric effect). These findings confirm favorable characteristics that allow proposing these systems for potential applications in food processing and preservation.

This work aimed to develop and evaluate pH-dependent systems based on nanospheres (NSphs) and nanocapsules (NCs) loaded with chlorhexidine (CHX) base as a novel formulation for the treatment of periodontal disease. Cellulose acetate phthalate (CAP) was employed as a pH-dependent polymeric material. The NSphs and NCs were prepared using the emulsion-diffusion technique and then characterized according to encapsulation efficiency (EE), size, zeta-potential, morphology, thermal properties, release profiles and a preliminary clinical panel test. The formulations showed 77% and 61% EE and 57% and 84% process efficiency (PE), respectively. Both systems were spherical with an average size of 250-300 nm. Differential scanning calorimetry (DSC) studies showed that the drug has the potential to be dispersed molecularly in the NSph matrix or dissolved in the oily center of the NCs. The CHX release test revealed that the release of NSphs-CHX follows Fickian diffusion involving diffusion-erosion processes. The NCs showed a slower release than the NSphs, following non-Fickian diffusion, which is indicative of anomalous transport. These nanosystems may, therefore, be employed as novel formulations for treating periodontal disease, due to (1) their coverage of a large surface area, (2) the controlled release of active substances at different pH, and (3) potential gingival tissue infiltration.

The aim of this study was to develop solid lipid nanoparticles (SLN) and introduce them into a direct compression process to evaluate their lubricant properties. The study consisted of preparing glyceryl behenate SLN (Compritol® 888 ATO) by hot dispersion, and magnesium stearate SLN by a novel nanoprecipitation/ion exchange method. The ejection force was measured for nanosystems and raw materials in a formulation typically used for direct compression. The smallest particle sizes obtained were 456 nm for Compritol® 888 ATO and 330 nm for magnesium stearate. Results show that the NPs used as lubricants in a direct compression model formulation provided efficient lubrication by maintaining the lubricating properties of the system, thereby decreasing the amount of lubricant used compared to the raw material. The lubricating effect showed an increase of 15-30% for magnesium stearate and Compritol® 888 ATO, compared to the raw material at concentrations above 2%., (Copyright © 2018 Elsevier B.V. All rights reserved.)

The vagina is a region of administration with a high contact surface to obtain local or systemic effects. This anatomical area represents special interest for government health systems for different sexually transmitted infections. However, the chemical changes of the vagina, as well as its abundant mucus in continuous exchange, act as a barrier and a challenge for the development of new drugs. For these purposes, the development of new pharmaceutical forms based on nanoparticles has been shown to offer various advantages, such as bioadhesion, easy penetration of the mucosa, and controlled release, in addition to decreasing the adverse effects of conventional pharmaceutical forms. In order to obtain nanoparticles for vaginal administration, the use of polymers of natural and synthetic origin including biodegradable and non-biodegradable systems have gained great interest both in nanospheres and in nanocapsules. The main aim of this review is to provide an overview of the development of nanotechnology for vaginal drug release, analyzing the different compositions of polymeric nanoparticles, and emphasizing new trends in each of the sections presented. At the end of this review, a section analyzes the properties of the vehicles employed for the administration of nanoparticles and discusses how to take advantage of the properties that they offer. This review aims to be a reference guide for new formulators interested in the vaginal route.

This study aimed to prepare poly (d,l-lactide-co-glycolide) (PLGA) nanoparticles (NPs) with chitosan (CTS) surface modification to be used as a vaginal delivery system for antimycotic drugs. Clotrimazole was encapsulated with entrapment efficiencies of 86.1 and 68.9% into Clotrimazole-PLGA-NPs (CLT-PLGA-NPs) and PLGA-NPs with CTS-modified surface (CLT-PLGA-CTS-NPs), respectively. The later NPs exhibited a larger size and higher positive zeta potential (Z potential) in comparison to unmodified NPs. In vitro release kinetic studies indicated that Clotrimazole was released in percentages of >98% from both nanoparticulate systems after 18days. Antifungal activity and mucoadhesive properties of NPs were enhanced when CTS was added onto the surface. In summary, these results suggested that Clotrimazole loaded into PLGA-CTS-NPs has great potential for vaginal applications in treating vaginal infections generated by Candida albicans., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Currently, nanotechnology represents an important tool and an efficient option for extending the shelf life of foods. Reducing particle size to nanometric scale gives materials distinct and improved properties compared to larger systems. For food applications, this technology allows the incorporation of hydrophilic and lipophilic substances with antimicrobial and antioxidant properties that can be released during storage periods to increase the shelf life of diverse products, including whole and fresh-cut fruits and vegetables, nuts, seeds, and cheese, among others. Edible coatings are usually prepared with natural polymers that are non-toxic, economical, and readily available. Nanosystems, in contrast, may also be prepared with biodegradable synthetic polymers, and liquid and solid lipids at room temperature. In this review, recent developments in the use of such nanosystems as nanoparticles, nanotubes, nanocomposites, and nanoemulsions, are discussed critically. The use of polymers as the support matrix for nanodispersions to form edible coatings for food preservation is also analyzed, but the central purpose of the article is to describe available information on nanosystems and their use in different food substrates to help formulators in their work., Competing Interests: The authors declare no conflict of interest.

The objective of this work was to evaluate the application of candeuba wax solid lipid nanoparticles (SLN) and xanthan gum (XG) as coatings on guava, and their effect on the fruit's physicochemical and nutritional parameters, complementing a previous publication carried out by Zambrano-Zaragoza et al. (2013). The concentrations of SLN were selected according to those reported as the most (65g/L) and least (75g/L) efficient in post-harvest life preservation, and were compared to a coating of XG and untreated control samples. According to results, the submicron-sized systems used in the coatings with a particle size range of 267-344nm, a polydispersity index <0.2, and zeta potential of -22.8 to -30mV remained stable during 8weeks of storage. The best results were from the fruits coated with 65g/L of SLN and stored at 10°C, as they showed the lowest O 2 and CO 2 respiration rates and, consequently, less weight loss. They also had the best retention of ascorbic acid and total phenol content, with less change in fruit color compared to the control guava and those coated only with XG. These findings indicate that this batch continued their natural maturation process, but at a slower rate than the other samples. The firmness was affected by the activity of the enzyme pectin methylesterase, but results show that the 65g/L coating was efficient in maintaining fruit texture. In contrast, the 75g/L coating produced epoxy in the fruit, causing physiological damage. Finally, the guava coated with XG only had a maturation rate similar to that of the control fruit., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

The main aim of this work was to evaluate the effect of the β-carotene release rate from nanocapsules incorporated into a xanthan gumcoating on the physical and physicochemical properties of fresh-cut melon (var. cantaloupe). Several coatings were studied: xanthan gum alone (XG), xanthan gum combined with nanocapsules (Ncs/XG), xanthan gum combined with nanospheres (Nsp/XG), nanocapsules (Ncs), and nanospheres (Nsp), all of which were compared to untreated fresh-cut melon in order to determine their preservation efficiency. The β-carotene release profiles from the Ncs and Ncs/XG treatments corresponded better to a Higuchi-type behavior (t 1/2 ) for matrix systems (R2>0.95). Also observed was a good correlation between the release of β-carotene by the Ncs/XG treatment and the minor changes observed in the whiteness index (≤10%) and firmness (≤2%). These results lead to the conclusion that incorporating β-carotene nanocapsules into a polysaccharide matrix improves the properties of the coatings, thereby increasing storage time to 21days at 4°C., (Copyright © 2016 Elsevier Ltd. All rights reserved.)