Search

In this research, the objective was to optimize the drying process of Astragalus by investigating the effects of microwave vacuum drying parameters, including temperature (30, 35, 40, 45, and 50 °C) and slice thickness (2, 3, 4, 5, and 6 mm). In addition, utilizing COMSOL 6.0 finite element analysis software, we delved into the distribution of heat and moisture during the drying process. The results revealed that drying temperature played a significantly greater role than slice thickness in determining the drying dynamics. The thermal and mass transfer mechanism indicated that the whole drying process conforms to the microwave radiation mechanism and the basic principle of electromagnetic heating. In the case of low temperatures and thinner slice sizes, the more polysaccharide content was retained; The total phenol content peaked when the slice thickness was 5 mm; The increase of slice thickness was not conducive to the retention of total flavonoids content. The potent antioxidant capacity was detected at a temperature of 40 °C, with slice thickness having a negligible effect on this capacity; Low temperatures were beneficial for the preservation of active ingredients. Compared with the scanning electron microscope, the structure appeared more uniform at a temperature of 50 °C. Based on the analysis of the kinetic characteristics of microwave vacuum drying of Astragalus and the quality achieved under various drying conditions, the results of the study can provide valuable guidance for controlling the quality of microwave vacuum drying of Astragalus under different drying requirements. [ABSTRACT FROM AUTHOR]

To fully leverage the advantages of both hot air drying and radio frequency vacuum drying, a segmented combination drying technique was applied to post-harvest Cistanche. This new drying method involves using hot air drying in the initial stage to remove the majority of free water, followed by radio frequency vacuum drying in the later stage to remove the remaining small amount of free water and bound water. During the radio frequency vacuum drying (RFV) phase, the effects of temperature (45, 55, and 65 °C), vacuum pressure (0.020, 0.030, and 0.040 MPa), plate spacing (65, 75, and 85 mm), and slice thickness (4, 5, and 6 mm) on the drying characteristics, quality, and microstructure of Cistanche slices were investigated. Additionally, infrared thermal imaging technology was used to examine the surface temperature distribution of the material during the drying process. The results showed that compared to radio frequency vacuum drying alone, the hot air–radio frequency combined drying significantly shortened the drying time. Under conditions of lower vacuum pressure (0.020 MPa), plate spacing (65 mm), and higher temperature (65 °C), the drying time was reduced and the drying rate increased. Infrared thermal imaging revealed that in the early stages of hot air–radio frequency vacuum combined drying, the center temperature of Cistanche was higher than the edge temperature. As drying progressed, the internal moisture of the material diffused from the inside out, resulting in higher edge temperatures compared to the center and the formation of overheating zones. Compared to natural air drying, the hot air–radio frequency vacuum combined drying effectively preserved the content of active components such as polysaccharides (275.56 mg/g), total phenols (38.62 mg/g), total flavonoids (70.35 mg/g), phenylethanoid glycosides, and iridoids. Scanning electron microscopy observed that this combined drying method reduced surface collapse and cracking of the material. This study provides theoretical references for future drying processes of Cistanche. [ABSTRACT FROM AUTHOR]

In this study, the radio frequency vacuum drying (RFVD) technique was used to dry Codonopsis pilosula slices. The effects of the drying temperature, slice thickness, plate spacing, and vacuum degree on the drying characteristics and physicochemical properties of the slices were investigated. The results showed that as the drying temperature and vacuum degree increased and the slice thickness and plate distance decreased, the drying rate and effective moisture diffusion coefficient of the Codonopsis pilosula slices improved, and the required drying time was shortened by 11.11% to 29.41% compared to that after hot air drying (HAD). Through comparison, it was found that the Midilli and Weibull models could better describe the moisture variation trend during the RFVD of Codonopsis pilosula. After RFVD, the retention of lobetyolin and syringin in Codonopsis pilosula significantly increased, with maximum contents of 135.74 mg/100 g and 19.16 mg/100 g respectively, which were 75.2% and 124.28% higher than those obtained by HAD. The contents of polysaccharides, total phenolics, and total flavonoids and antioxidant performance were also enhanced. The color, shrinkage rate, and internal tissue structure were significantly improved. In conclusion, RFVD not only increases the drying speed of Codonopsis pilosula slices but also ensures the good quality of the dried products. [ABSTRACT FROM AUTHOR]

This study aims to maximize the post-harvest quality of Moutan Cortex and reduce energy consumption. Radio frequency vacuum (RFV) technology was used to dehydrate Moutan Cortex in this study to investigate the effects of different drying temperatures, plate spacing, and vacuum degree on the drying kinetics, physicochemical quality, and microstructure of Moutan Cortex. The results showed that RFV drying shortened the dehydration time of the Moutan Cortex by 10.71–28.57% and increased the drying rate by 15.79–54.39% compared to hot-air drying. The best color (∆E = 6.08 ± 0.28, BI = 26.97 ± 0.98) and relatively high retention of polysaccharides, total phenolics, total flavonoids, antioxidant properties, paeonol, gallic acid, paeoniflorin, and benzoylpaeoniflorin contents were observed in the dried products of Moutan Cortex at a drying temperature of 50 °C, spacing of 90 mm, and vacuum of 0.025 MPa. Analyzing the microstructure, it was found that RFV drying could effectively inhibit the shrinkage and collapse of the cellular structure, and a regular and loose honeycomb pore structure appeared inside the samples, which contributed to the rapid migration of the internal moisture. This study can provide a theoretical reference basis for the selection and application of industrialized processing methods of high-quality Moutan Cortex. [ABSTRACT FROM AUTHOR]

By using ultrasonic synergy vacuum far‐infrared drying (US‐VFID), the effects of different conditions on the drying kinetics, functional properties, and microstructure of Codonopsis pilosula slices were studied. The sparrow search algorithm (SSA) was used to optimize the back‐propagation (BP) neural network to predict the moisture ratio during drying. With the increase of ultrasonic frequency, power and radiation temperature, the drying time of C. pilosula was shortened. The drying time of US‐VFID was 25% shorter than VFID, when radiation temperature was 50°C, ultrasonic power was 48 W, and frequency was 28 kHz. The SSA‐BP neural network, the average absolute error prediction was 0.0067. Compared with hot air drying (HAD), the total phenolic content and antioxidant activity of C. pilosula by US‐VFID were increased by 29.47% and 8.67%, respectively, and a reduction in color contrast of 16.19%. The dilation and generation of microcapillary of C. pilosula were more obvious. The study revealed US‐VFID could be used for the selection and process control of agro‐processing methods for C. pilosula products. [ABSTRACT FROM AUTHOR]

Ultrasonic (US) maltreatment was performed before the vacuum far-infrared drying (VFID) of Codonopsis pilosula (CP) slices to investigate the effects of different US parameters on the drying characteristics and nutrients of CP slices. The grey correlation method with relative correlation degree (ri) as the evaluation measure was used to construct a model for the evaluation of the pretreatment quality of CP and to determine the optimal pretreatment conditions. The results showed that with the increase in US frequency and power, the drying rate increased. Under the conditions of US power of 180 W, frequency of 60 kHz and a pre-treatment time of 30 min, the drying time reduced by 28.6%. The contents of polysaccharide and syringin in dried CP slices pretreated by US increased by 14.7% and 62.0%, respectively, compared to the non-pre-treated samples, while the total flavonoid content decreased by 10.0%. In terms of colour, pretreatment had a certain protective effect on the red colour of dried products. The highest relative correlation (0.574) and the best overall quality of performance were observed at 180 W, 60 kHz and 30 min. Overall, US technology is suitable for the pretreatment processing of CP, which is of great significance to the drying of CP. [ABSTRACT FROM AUTHOR]

In this paper, the effects of ultrasonic pretreatment on the drying kinetics, bioactive components (polysaccharides, total phenols, total flavonoids and antioxidant), qualitative characteristics (color index, lobetyolin and syringin) and microstructure of Codonopsis pilosula during radio frequency vacuum drying (RFVD) were studied. The average drying rate curve showed that the whole drying process could be divided into three stages: accelerating period, constant drying rate period and falling drying rate period. Deff values ranged from 6.61425 to 9.46745 × 10−8. Analysis of the drying rate constants revealed that different conditions of pretreatment were effective in increasing the drying rate. Ultrasonic pretreatment has a positive effect on the retention of polysaccharide content; low frequency favors retention of total phenols, flavonoids and syringin; and with the increase in ultrasonic time and ultrasonic power, the antioxidant capacity was higher than that without ultrasonic treatment. Ultrasonic pretreatment significantly improved color and microstructure. In summary, the pretreatment condition of ultrasonic frequency 20 kHz and power 60 W for 30 min is suitable, which provides a certain reference for the application of ultrasonic pretreatment technology in RFVD of Codonopsis pilosula slices. [ABSTRACT FROM AUTHOR]

Practical Application To address the challenges associated with prolonged traditional hot air drying (HAD) times and significant nutrient loss in cherries, this study employs ultrasound‐assisted hot air drying (USA‐HAD) technology. The study investigates the impacts of various ultrasound (US) frequencies, US powers, and hot air temperatures on the drying kinetics, physicochemical properties, texture attributes, and microstructure of cherries during drying. Cherry physicochemical quality serves as the evaluation criterion, with the entropy‐weighted TOPSIS method used to identify the optimal drying parameters. The findings indicate that USA‐HAD accelerates the drying process, reduces drying time, and enhances drying efficiency. In comparison to natural drying, USA‐HAD significantly preserves polysaccharides, total phenolic content, total flavonoid content, and organic acids in cherries, while boosting antioxidant activity. Concurrently, it reduces color intensity, as well as the hardness, chewiness, and gumminess of dried cherry products. Microstructural observations under different drying methods reveal an increase in surface micropores and relatively intact tissue structure. Under conditions of 55°C, 48 W, and 28 kHz, cherries exhibit superior overall quality based on the TOPSIS relative closeness degree. This study offers practical insights for optimizing post‐harvest processing of cherries.In this rapidly evolving era, the application of combination drying technology is clearly on the rise. The USA‐HAD treated cherries had better nutritional and bioactive than HAD. The conclusions obtained indicate that the USA‐HAD technology has more potential for development. [ABSTRACT FROM AUTHOR]