Search

Sugarcane bagasse is an agro-waste that could replace timber resources for the production of bio-composites. Composite boards such as particleboard offer an issue for the use and recycling of poor quality timber, and these engineered products can overcome some solid wood limitations such as heterogeneity and dimension. Bagasse offers an alternative to wood chips for particleboard production but present some disadvantages as well, such as poor physico-mechanical properties. To address these issues, bagasse fibers were treated with an innovative natural resin formulated with tannin and furfural. Impregnated particles with different concentrations of resin (5%, 10%, and 15% m/m) were exposed to temperatures of 40°C, 60°C, 80°C, and 100°C for resin curing. Various types of tannin-based adhesives, including tannin formaldehyde, tannin/formaldehyde-furfural, and tannin hexamine, were utilized for bonding the treated bagasse particles. The resultant panels were assessed for their physical and mechanical properties and compared to those produced using Melamine-Urea-Formaldehyde (MUF) adhesive. The density of the panels varied from 650 to 730 kg/m3 depending on the resin concentration. The values for both modulus of elasticity and modulus of rupture increased as the resin concentration increased. The internal bonding values exhibited an increase with resin concentration up to a critical point, after which a decreasing trend was observed. The water absorption and thickness swelling were significantly reduced with an increase in resin concentration. However, the panels produced using MUF adhesive yielded the most favorable physico-mechanical properties. Additionally, the panels made with tannin-based adhesives met the minimum requirements specified in the standard EN 312 (specifications for uncoated resin-bonded particleboards) for application in dry conditions. The analysis of formaldehyde emissions indicated that panels produced with tannin-based adhesives exhibited signific

The effects of different mixing, bamboo mesh size and heat treatment on the physical and mechanical properties and biodegradability of a polylactic acid (PLA) composite were determined. The results indicated that this composite exhibited high strength in all mechanical properties examined, except hardness using the pure polymer (PLA). The mesh size of the bamboo flour and heat treatment had considerable effects on all tests expect the decay resistance. The water absorbance and thickness swelling of the PLA composite was reduced to nearly zero after 3000 hours immersion in water. Moreover, the fungal decay test results demonstrated that PLA was highly resistant to both Basidiomycetes and Ascomycetes fungi. The brown rot fungi, however, produced an extensive mass loss in the composite composed of different levels of bamboo flour.