Search

Introduction: PF-06439535 (bevacizumab-bvzr; Zirabev ® ) is a bevacizumab biosimilar. The stability profile and functional activity of PF-06439535 after dilution for intravenous infusion was evaluated following extended storage conditions., Methods: PF-06439535 drug product was diluted in 0.9% sodium chloride to produce final concentrations of 1.4 and 16.5 mg/mL of PF-06439535, representing clinically relevant low and high doses for intravenous infusion. Three drug product lots and three infusion bag types (polyolefin, ethylene vinyl acetate, and polyvinyl chloride) were tested. To simulate the potential preparation and administration conditions encountered in a clinical setting, prepared drug solutions were initially stored at 25 ± 5°C for 24 ± 2 h, and then at 5 ± 3°C for up to 6 weeks. Extended storage was followed by storage at 25 ± 5°C for 24 ± 2 h before testing. Physicochemical and biological stability were evaluated according to visual characteristics and pH, protein concentration, particulate content, the proportions of molecular weight variants and charge variants, and relative potency. A wide range of analytical techniques optimized for PF-06439535 assessment were employed, such as size-exclusion chromatography, non-reducing sodium dodecyl sulfate capillary electrophoresis, cation-exchange chromatography, far-UV circular dichroism spectroscopy, differential scanning calorimetry, and an in vitro cell-based bioassay., Results: For all concentrations, drug product lots, infusion bag types, and time points tested, there were no significant changes in protein concentration and no notable differences in visual characteristics (color, clarity, and visible particulates). The abundance of molecular weight variants and charge variants remained stable over the 6-week study period. There were no stability concerns with regard to sub-visible particles. There were no significant changes in primary, secondary, or tertiary structure. Finally, the in vitro relative potency of PF-06439535 was maintained throughout the study period., Conclusions: The stability and biological activity of PF-06439535 was maintained after dilution and storage for up to 6 weeks at 2-8°C, demonstrating the integrity of diluted PF-06439535 under extended in-use conditions.

Introduction: The stability and functional activity of the trastuzumab biosimilar PF-05280014 (trastuzumab-qyyp; Trazimera TM ), was assessed under extended in-use conditions., Methods: PF-05280014 was diluted in 0.9% sodium chloride to final concentrations of 0.2 mg/mL and 4 mg/mL in 3 different types of infusion bags (polyolefin, ethylene vinyl acetate, and polyvinyl chloride). Infusion bags containing diluted PF-05280014 were stored at 25 ± 5° C for 24 h, before storage at 5 ± 3° C for 0, 1, 2, 4, or 6 weeks. Following extended storage, samples of PF-05280014 were removed from the infusion bags and stored at 25 ± 5° C for 24 h before biophysical and functional characterization. In addition to the visual characteristics of each sample at the various time points, the stability of PF-05280014 was assessed using a variety of biophysical techniques, including size-exclusion high-performance liquid chromatography, non-reducing sodium dodecyl sulfate capillary electrophoresis, cation-exchange chromatography, peptide mapping, far-UV circular dichroism spectroscopy, and differential scanning calorimetry. The functional activity of PF-05280014 was evaluated using a cell-based growth inhibition assay., Results: For all PF-05280014 concentrations, time points and infusion bags tested, there were no significant differences in visual characteristics or in protein concentration. The were no significant changes in the relative abundance of molecular weight or charge variants throughout the 6-week study period. Similarly, there were no significant changes in primary structure or in secondary structure content during the study. The relative potency of PF-05280014 was also maintained throughout the 6-week period., Conclusions: The stability and functional activity of PF-05280014 was maintained following dilution in 0.9% sodium chloride and storage for up to 6 weeks at 2-8° C.

The human gamma-herpesviruses Epstein-Barr virus (EBV) (HHV-4) and Kaposi's sarcoma-associated herpesvirus (KSHV) (HHV-8) are responsible for a number of diseases, including various types of cancer. Epstein-Barr nuclear antigen 1 (EBNA1) from EBV and latency-associated nuclear antigen (LANA) from KSHV are viral-encoded DNA-binding proteins that are essential for the replication and maintenance of their respective viral genomes during latent, oncogenic infection. As such, EBNA1 and LANA are attractive targets for the development of small-molecule inhibitors. To this end, we performed a biophysical screen of EBNA1 and LANA using a fragment library by saturation transfer difference (STD)-NMR spectroscopy and surface plasmon resonance (SPR). We identified and validated a number of unique fragment hits that bind to EBNA1 or LANA. We also determined the high-resolution crystal structure of one fragment bound to EBNA1. Results from this screening cascade provide new chemical starting points for the further development of potent inhibitors for this class of viral proteins.

Epstein-Barr virus (EBV) is a DNA tumor virus responsible for 1 to 2% of human cancers including subtypes of Burkitt's lymphoma, Hodgkin's lymphoma, gastric carcinoma, and nasopharyngeal carcinoma (NPC). Persistent latent infection drives EBV-associated tumorigenesis. Epstein-Barr nuclear antigen 1 (EBNA1) is the only viral protein consistently expressed in all EBV-associated tumors and is therefore an attractive target for therapeutic intervention. It is a multifunctional DNA binding protein critical for viral replication, genome maintenance, viral gene expression, and host cell survival. Using a fragment-based approach and x-ray crystallography, we identify a 2,3-disubstituted benzoic acid series that selectively inhibits the DNA binding activity of EBNA1. We characterize these inhibitors biochemically and in cell-based assays, including chromatin immunoprecipitation and DNA replication assays. In addition, we demonstrate the potency of EBNA1 inhibitors to suppress tumor growth in several EBV-dependent xenograft models, including patient-derived xenografts for NPC. These inhibitors selectively block EBV gene transcription and alter the cellular transforming growth factor-β (TGF-β) signaling pathway in NPC tumor xenografts. These EBNA1-specific inhibitors show favorable pharmacological properties and have the potential to be further developed for the treatment of EBV-associated malignancies., (Copyright © 2019 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.)

The increased interest in using monoclonal antibodies (mAbs) as a platform for biopharmaceuticals has led to the need for new analytical techniques that can precisely assess physicochemical properties of these large and very complex drugs for the purpose of correctly identifying quality attributes (QA). One QA, higher order structure (HOS), is unique to biopharmaceuticals and essential for establishing consistency in biopharmaceutical manufacturing, detecting process-related variations from manufacturing changes and establishing comparability between biologic products. To address this measurement challenge, two-dimensional nuclear magnetic resonance spectroscopy (2D-NMR) methods were introduced that allow for the precise atomic-level comparison of the HOS between two proteins, including mAbs. Here, an inter-laboratory comparison involving 26 industrial, government and academic laboratories worldwide was performed as a benchmark using the NISTmAb, from the National Institute of Standards and Technology (NIST), to facilitate the translation of the 2D-NMR method into routine use for biopharmaceutical product development. Two-dimensional 1 H, 15 N and 1 H, 13 C NMR spectra were acquired with harmonized experimental protocols on the unlabeled Fab domain and a uniformly enriched- 15 N, 20%- 13 C-enriched system suitability sample derived from the NISTmAb. Chemometric analyses from over 400 spectral maps acquired on 39 different NMR spectrometers ranging from 500 MHz to 900 MHz demonstrate spectral fingerprints that are fit-for-purpose for the assessment of HOS. The 2D-NMR method is shown to provide the measurement reliability needed to move the technique from an emerging technology to a harmonized, routine measurement that can be generally applied with great confidence to high precision assessments of the HOS of mAb-based biotherapeutics.

Fragonomics is the process of using small, relatively simple molecules to generate chemical starting points for hit generation. Fragonomics has come of age and is now one of the major concepts in hit generation. What is its future?

Streptococcus pneumoniae (pneumococcus) expresses a capsular polysaccharide (CPS) that protects against host immunity and is synthesized by enzymes in the capsular polysaccharide synthesis (cps) locus. Serogroup 11 has six members (11A to -E) and the CPS structure of all members has been solved, except for serotype 11D. The cps loci of 11A and 11D differ by one codon (N112S) in wcrL, which putatively encodes a glycosyltransferase that adds the fourth sugar of the CPS repeating unit (RU). Gas chromatography and nuclear magnetic resonance analysis revealed that 11A and 11D PSs contain identical CPS RUs that contain αGlc as the fourth sugar. However, ∼25% of 11D CPS RUs contain instead αGlcNAc as the fourth sugar, suggesting that 11D wcrL encodes a bispecific glycosyltransferase. To test the hypothesis that codon 112 of WcrL determines enzyme specificity, and therefore the fourth sugar in the RU, we generated three isogenic pneumococcal strains with 11A cps loci containing wcrL encoding Ser-112 (MBO128) or Ala-112 (MBO130). MBO128 was serologically and biochemically identical to serotype 11D. MBO130 has a unique serologic profile; has as much αGlcNAc as 11F, 11B, and 11C CPS do; and may represent a new serotype. These findings demonstrate how pneumococci alter their CPS structure and their immunologic properties with a minimal genetic change.

Fragment screening by saturation transfer difference nuclear magnetic resonance (STD-NMR) is a robust method for identifying small molecule binders and is well suited to a broad set of biological targets. STD-NMR is exquisitely sensitive for detecting weakly binding compounds (a common characteristic of fragments), which is a crucial step in finding promising compounds for a fragment-based drug discovery campaign. This protocol describes the development of a library suitable for STD-NMR fragment screening, as well as preparation of protein samples, optimization of experimental conditions, and procedures for data collection and analysis.

The N-glycosylation pathway in Pichia pastoris has been humanized by the deletion of genes responsible for fungal-type glycosylation (high mannose) as well as the introduction of heterologous genes capable of forming human-like N-glycosylation. This results in a yeast host that is capable of expressing therapeutic glycoproteins. A thorough investigation was performed to examine whether glycoproteins expressed in glycoengineered P. pastoris strains may contain residual fungal-type high-mannose structures. In a pool of N-linked glycans enzymatically released by protein N-glycosidase from a reporter glycoprotein expressed in a developmental glycoengineered P. pastoris strain, an oligosaccharide with a mass consistent with a Hexose(9)GlcNAc(2) oligosaccharide was identified. When this structure was analyzed by a normal-phase high-performance liquid chromatography (HPLC), its retention time was identical to a Man(9)GlcNAc(2) standard. However, this Hexose(9)GlcNAc(2) oligosaccharide was found to be resistant to α-1,2-mannosidase as well as endomannosidase, which preferentially catabolizes endoplasmic reticulum oligosaccharides containing terminal α-linked glucose. To further characterize this oligosaccharide, we purified the Hexose(9)GlcNAc(2) oligosaccharide by HPLC and analyzed the structure by high-field one-dimensional (1D) and two-dimensional (2D) (1)H NMR (nuclear magnetic resonance) spectroscopy followed by structural elucidation by homonuclear and heteronuclear 1D and 2D (1)H and (13)C NMR spectroscopy. The results of these experiments lead to the identification of an oligosaccharide α-Man-(1 → 2)-β-Man-(1 → 2)-β-Man-(1 → 2)-α-Man-(1 → 2) moiety as part of a tri-antennary structure. The difference in enzymatic reactivity can be attributed to multiple β-linkages on the α-1,3 arm of the Man(9)GlcNAc(2) oligosaccharide., (© The Author 2011. Published by Oxford University Press. All rights reserved.)

Poly- and oligo-saccharides are commonly employed as antigens in many vaccines. These antigens contain phosphoester structural elements that are crucial to the antigenicity, and hence the effectiveness of the vaccine. Nuclear Magnetic Resonance (NMR) is a powerful tool for the site-specific identification of phosphoesters in saccharides. We describe here two advances in the characterization of phosphoesters in saccharides: (1) the use of (1)H-(31)P GHMBC to determine the site-specific identity of phosphoester moieties in heterogeneous mixtures and (2) the use of Unsymmetrical/Generalized Indirect Covariance (U/GIC) to calculate a carbon-phosphorus 2D spectrum. The sensitivity of the (1)H-(31)P GHMBC is far greater than the "standard" (1)H-(31)P GHSQC and allows long-range (3-5)J(HP) couplings to be readily detected. This is the first example to be reported of using U/GIC to calculate a carbon-phosphorus spectrum. The U/GIC processing affords, in many cases, a fivefold to tenfold or greater increase in signal-to-noise ratios in the calculated spectrum. When coupled with the high sensitivity of (1)H-(31)P HMBC, U/GIC processing allows the complete and unambiguous assignments of phosphoester moieties present in heterogeneous samples at levels of ~5% (or less) of the total sample, expanding the breadth of samples that NMR can be used to analyze. This new analytical technique is generally applicable to any NMR-observable phosphoester., (© Springer Science+Business Media B.V. 2011)

Despite the emerging impact of serogroup 11 serotypes in Streptococcus pneumoniae epidemiology, the structures of serogroup 11 capsule types have not been fully elucidated, particularly the locations of O-acetyl substitutions. Here, we report the complete structures of the serotype 11B, 11C, and 11F polysaccharides and a revision to the serotype 11A capsular polysaccharide using nuclear magnetic resonance (NMR). All structures shared a linear, tetrasaccharide backbone with a pendant phosphopolyalcohol. Three of four saccharides are conserved in all serotypes. The individual serotype capsules differed in the identity of one saccharide, the pendant phosphopolyalcohol, and the O-acetylation pattern. Though the assigned locations of O-acetate substitutions in this study differed from those of previous reports, our findings were corroborated with strong correlations to serology and genetics. We examined the binding of serotyping sera to serogroup 11 polysaccharides by using flow cytometry and an inhibition-type enzyme-linked immunosorbent assay (ELISA) and found that de-O-acetylation of capsular polysaccharides by mild hydrolysis decreases its immunoreactivity, supporting the crucial role of O-acetylation in the antigenicity of these polysaccharides. Due to strong correlations between polysaccharide structures and capsule biosynthesis genes, we were able to assign target substrates for the O-acetyltransferases encoded by wcwC, wcwR, wcwT, and wcjE. We identified antigenic determinants for serogroup 11 serotyping sera and highlight the idea that conventional serotyping methods are not capable of recognizing all putative variants of S. pneumoniae serogroup 11.

We have discovered a novel bacterial polysaccharide structural element, 3-O-acetylglycerol, in the Streptococcus pneumoniae ST11A polysaccharide: This moiety was elucidated through a combination of homonuclear and heteronuclear 1D and 2D NMR experiments using (1)H, (13)C, and (31)P in various combinations. The 3-O-acetylglycerol moiety is substoichiometrically O-acetylated in ST11A; yet, key connectivities that unequivocally show O-acetylation at the glycerol are provided by the long-range correlations from the acetate methyl groups to the glycerol in the (1)H-(13)C HMBC spectrum. Additionally, we clarify the (1)H-(31)P assignments previously presented.

We have undertaken a structural assessment of Streptococcus pneumoniae 11A polysaccharide as well as two clinical isolates related to 11A. The clinical isolates were labeled 11Aalpha and 11Abeta. The result of our experiments is a revision to the old structure for S. pneumoniae 11A polysaccharide. The new structure differs from the old structure in both the primary connectivities and acetylation pattern. We also show that 11A contains an acetylglycerol-PO4 moiety, a substitution that is heretofore unknown in the bacterial polysaccharide literature. The two clinical isolates were also structurally characterized. 11Aalpha was determined to be identical to 11A. 11Abeta is a new serotype, which differs from 11A in the absence of the acetylation of the glycerol-PO4 moiety and a different acetylation pattern of the saccharides. Thus, we propose that the acetylglycerol is the structural basis for 11Aalpha and 11Abeta subtypes.

Fragment-based drug discovery (FBDD) needs a biophysical assay to complement, or even replace, biochemical screening. NMR is the best choice for this because NMR delivers many different types of data that impacts medicinal chemistry decisions. There are a multitude of different NMR methods which can be employed to these ends. The choice of which method to use will be different for every need. We discuss the different methods, the data they produce, and how they are best utilized in a FBDD setting.

The use of smaller molecules (fragments) in the drug discovery process has led to success in delivering novel leads for many different targets. This process is a highly integrated process, starting from library design to screening and medicinal chemistry. An overview of this process is presented with particular emphasis placed on the NMR aspect of screening.

Residual dipolar couplings (RDCs) induced by anisotropic media are a powerful tool for the structure determination of biomolecules through NMR spectroscopy. Recent advances have proven it to be a valuable tool for determination of the stereochemistry of organic molecules. By simple inspection or order matrix calculations, RDCs provide unambiguous information about the relative configurations or complete stereochemistry of organic compounds., (Copyright 2004 John Wiley & Sons, Ltd.)

A novel methodology using the order matrix calculation to determine the absolute sign of spin-spin couplings based on the structure of organic compounds is presented. The sign of the residual dipolar coupling (RDC) depends on the sign of corresponding scalar spin-spin coupling constant and the sign of the RDC has a dramatic influence on the order matrix calculation. Therefore, the sign of the spin-spin coupling constant can be obtained by an order matrix calculation through the corresponding RDC. Six types of spin-spin coupling constants, including 2J(H,H), 1J(C,F), 2J(C,F), 3J(C,F), 2J(F,H) and 3J(F,H), were obtained simultaneously. Except for 3J(C,F) where the measured RDCs have very small magnitudes, the signs were determined unambiguously., (Copyright 2004 John Wiley & Sons, Ltd.)

Residual dipolar couplings (RDCs), in combination with molecular order matrix calculations, were used to unambiguously determine the complete relative stereochemistry of an organic compound with five stereocenters. Three simple one-dimensional experiments were utilized for the measurements of (13)C-(1)H, (13)C-(19)F, (19)F-(1)H, and (1)H-(1)H RDCs. The order matrix calculation was performed on each chiral isomer independently. The fits were evaluated by the comparison of the root-mean-square deviation (rmsd) of calculated and measured RDCs. The order tensor simulations based on two different sets of RDC data collected with phage and bicelles are consistent. The resulting stereochemical assignments of the stereocenters obtained from using only RDCs are in perfect agreement with those obtained from the single-crystal X-ray structure. Six RDCs are found to be necessary to run the simulation, and seven are the minimum to get an acceptable result for the investigated compound. It was also shown that (13)C-(1)H and (1)H-(1)H RDCs, which are the easiest to measure, are also the most important and information-rich data for the order matrix calculation. The effect of each RDC on the calculation depends on the location of the corresponding vector in the structure. The direct RDC of a stereocenter is important to the configuration determination, but the configuration of stereocenters devoid of protons can also be obtained from analysis of nearby RDCs.

The crucial step in drug discovery is the identification of a lead compound from a vast chemical library by any number of screening techniques. NMR-based screening has the advantage of directly detecting binding of a compound to the target. The spectra resulting from these screens can also be very complex and difficult to analyze, making this an inefficient process. We present here a method, RAMPED-UP NMR, (Rapid Analysis and Multiplexing of Experimentally Discriminated Uniquely Labeled Proteins using NMR) which generates simple spectra which are easy to interpret and allows several proteins to be screened simultaneously. In this method, the proteins to be screened are uniquely labeled with one amino acid type. There are several benefits derived from this unique labeling strategy: the spectra are greatly simplified, resonances that are most likely to be affected by binding are the only ones observed, and peaks that yield little or no information upon binding are eliminated, allowing the analysis of multiple proteins easily and simultaneously. We demonstrate the ability of three different proteins to be analyzed simultaneously for binding to two different ligands. This method will have significant impact in the use of NMR spectroscopy for both the lead generation and lead optimization phases of drug discovery by its ability to increase screening throughput and the ability to examine selectivity. To the best of our knowledge, this is the first time in any format that multiple proteins can be screened in one tube.

The effect of longitudinal relaxation of ligand protons on saturation transfer difference (STD) was investigated by using a known binding system, dihydrofolate reductase and trimethoprim. The results indicate that T1 relaxation of ligand protons has a severe interference on the epitope map derived from a STD measurement. When the T1s of individual ligand protons are distinctly different, STD experiments may not give an accurate epitope map for the ligand-target interactions. Measuring the relaxation times prior to mapping is strongly advised. A saturation time shorter than T1s is suggested for improving the potential epitope map. Reduction in temperature was seen to enhance the saturation efficiency in small to medium size targets.

A novel method for the determination of the relative stereochemistry of six-membered chairlike ring molecules by residual dipolar couplings is presented. C-H residual dipolar couplings were used to investigate the relative stereochemistry of 4,6-O-ethylidene-d-glucopyranose. For this and similar systems it is not necessary to acquire redundant dipolar couplings and to calculate the orientation order tensor. The presented methodology is a paradigmatic leap for the determination of the relative stereochemistry or remote stereochemistry in this kind of fused ring system. Residual dipolar coupling data were collected by 1D and 2D direct-measurement heteronuclear multiple quantum coherence (HMQC) spectroscopy. It was demonstrated that direct measurement of HMQC was quick and accurate for small molecules at natural abundance.

The drug discovery process relies on characterizing structure-activity relationships, since specific ligand-target interactions often result in important biological functions. Measuring diffusion coefficients by nuclear magnetic resonance spectroscopy is a useful way to study binding, because changes can be detected when a small ligand interacts with a macromolecular target. Diffusion coefficients can be miscalculated, however, due to magnetization transfer between the receptor and ligand. This transferred nuclear Overhauser effect (trNOE) disrupts the observed signal decay due to diffusion as a function of the experimental diffusion time. Since longer diffusion times also selectively edit free ligand signal, the measured diffusion coefficients become biased toward the fraction of bound ligand. Despite this discrepancy, under these experimental conditions, the trNOE selectively influences the measured signals of binding ligands and can be used to gain insight into ligand-protein interactions. These phenomena have been studied for caffeine and L-tryptophan, which bind to human serum albumin, and the antimalarial agent trimethoprim, which interacts with dihydrofolate reductase. The results provide insight into the nature of ligand-protein binding and are thus useful for elucidating the molecular features of the ligand that interact with the protein.

The drug discovery process often involves the screening of compound libraries to identify drug candidates capable of binding to target macromolecules. New approaches in biological and chemical research are driving a change in the pharmaceutical industry. Recent advances in NMR spectroscopy such as affinity NMR techniques, which detect binding of a small molecule with a "receptor", have been shown to be valuable tools to perform rapid screening of compounds for biological activity. These NMR observable events include using relaxation, chemical shift perturbations, translational diffusion, and magnetization transfer. These one dimensional NMR methods increase both the throughput of screening and yield crucial data on the mode of binding. The practical utility of these techniques will be described.

A novel method based on diffusion NMR for the epitope mapping of ligand binding is presented. The intermolecular NOE builds up during a long diffusion period and creates a deviation from the linearity. The ligand proton nearest the protein generates the strongest NOE from protein during the diffusion period and has the largest deviation. Therefore, this diffusion artifact can be used to characterize the ligand binding epitope. The concept was investigated using dihydrofolate reductase (DHFR) and its ligand trimethoprim (TMP), and the epitope map of TMP on DHFR generated with this method is in excellent agreement with the structural and dynamic studies by crystallography and NMR, as well as the medicinal chemistry results.

The structures of apo- and holorubredoxins from Pyrococcus furiosus (PfRd) and Clostridium pasteurianum (CpRd) have been investigated and compared using residual dipolar couplings to probe the origin of thermostability. In the native, metal (Fe or Zn) containing form, both proteins can maintain native structure at very high temperatures (>70 degrees C) for extended periods of time. Significant changes in either structure or backbone dynamics between 25 and 70 degrees C are not apparent for either protein. A kinetic difference with respect to metal loss is observed as in previous studies, but the extreme stability of both proteins in the presence of metal makes thermodynamic differences difficult to monitor. In the absence of metal, however, a largely reversible thermal denaturation can be monitored, and a comparison of the two apoproteins can offer insights into the origin of stability. Below denaturation temperatures apo-PfRd is found to have a structure nearly identical to that of the native holo form, except immediately adjacent to the metal binding site. In contrast, apo-CpRd is found to have a structure distinctly different from that of its holo form at low temperatures. This structure is rapidly lost upon heating, unfolding at approximately 40 degrees C. A PfRd mutant with the hydrophobic core mutated to match that of CpRd shows no change in thermostability in the metal-free state. A metal-free chimera with residues 1-15 of CpRd and the remaining 38 residues of PfRd is severely destabilized and is unfolded at 25 degrees C. Hence, the hydrophobic core does not seem to be the key determinant of thermostability; instead, data point to the hydrogen bond network centered on the first 15 residues or the interaction of these 15 residues with other parts of the protein as a possible contributor to the thermostability.

An intensity-based constant-time COSY (CT-COSY) method is described for measuring 1H-1H residual dipolar couplings of proteins in weakly aligned media. For small proteins, the overall sensitivity of this experiment is comparable to the NOESY experiment. In cases where the 1H-1H distances are defined by secondary structure, such as 1H(alpha)-1H(N) and 1H(N)-1H(N) sequential distances in alpha-helices and beta-sheets, these measurements provide useful orientational constraints for protein structure determination. This experiment can also be used to provide distance information similar to that obtained from NOE connectivities once the angular dependence is removed. Because the measurements are direct and non-coherent processes, such as spin diffusion, do not enter, the measurements can be more reliable. The 1/r3 distance dependence of directly observed dipolar couplings, as compared with the 1/r6 distance dependence of NOEs, also can provide longer range distance information at favorable angles. A simple 3D, 15N resolved version of the pulse sequence extends the method to provide the improved resolution required for application to larger biomolecules.

Residual dipolar couplings for pairs of proximate magnetic nuclei in macromolecules can easily be measured using high-resolution NMR methods when the molecules are dissolved in dilute liquid crystalline media. The resulting couplings can in principle be used to constrain the relative orientation of molecular fragments in macromolecular systems to build a complete structure. However, determination of relative fragment orientations based on a single set of residual dipolar couplings is inherently hindered by the multi-valued nature of the angular dependence of the dipolar interaction. Even with unlimited dipolar data, this gives rise to a fourfold degeneracy in fragment orientations. In this Communication, we demonstrate a procedure based on an order tensor analysis that completely removes this degeneracy by combining residual dipolar coupling measurements from two alignment media. Application is demonstrated on (15)N-(1)H residual dipolar coupling data acquired on the protein zinc rubredoxin from Clostridium pasteurianum dissolved in two different bicelle media., (Copyright 2000 Academic Press.)