Search

Water pollution has becoming an increasingly serious issue, and it has attracted a significant amount of attention from scholars. Here, in order remove heavy metal hexavalent chromium (Cr (VI)) from wastewater, graphitic carbon nitride (g-C3N4) was modified with molybdenum disulfide (MoS2) at different mass ratios via an ultrasonic method to synthesize g-C3N4/MoS2 (CNM) nanocomposites as photocatalysts. The nanocomposites displayed efficient photocatalytic removal of toxic hexavalent chromium (Cr (VI)) from water under UV, solar, and visible light irradiation. The CNM composite with a 1:2 g-C3N4 to MoS2 ratio achieved optimal 91% Cr (VI) removal efficiency at an initial 20 mg/L Cr (VI) concentration and pH 3 after 120 min visible light irradiation. The results showed a high pH range and good recycling stability. The g-C3N4/MoS2 nanocomposites exhibited higher performance compared to pure g-C3N4 due to the narrowed band gap of the Z-scheme heterojunction structure and effective separation of photo-generated electron–hole pairs, as evidenced by structural and optical characterization. Overall, the ultrasonic synthesis of g-C3N4/MoS2 photocatalysts shows promise as an efficient technique for enhancing heavy metal wastewater remediation under solar and visible light. [ABSTRACT FROM AUTHOR]

The graphitic carbon nitride (g-C3N4) was prepared by thermal condensation using urea as a precursor, and then modified with different concentrations of citric acid. The scanning electron microscopic (SEM) characterization and X-ray diffraction (XRD) analysis showed that the g-C3N4-1 modified with 1 mol/L citric acid features a loose and porous structure, and exhibits the best photocatalytic activity for the removal of Cr(VI) from water. 100% of Cr(VI) with a mass concentration of 20 mg/L in water at an initial pH of 1 could be removed after photoreaction catalyzed by 40 mg of g-C3N4-1 for 80 min. [ABSTRACT FROM AUTHOR]

The rapid progress of modern industry not only brings convenience to people's lives, but also brings negative effects. Industrial development produces a large amount of waste metal, which brings harm to the environment and human health. Carbon nitride (g-C3N4) was successfully prepared using the thermal-polymerization method and petal-like g-C3N4 (CA-g-C3N4) was impregnated with citric acid (CA). Compared with g-C3N4, CA-g-C3N4 showed extremely high photocatalytic activity because the petal-like g-C3N4 (CA-g-C3N4) had a larger specific surface area, which increased the active sites on the surface of the photocatalyst and improved the photocatalytic activity. After citric acid treatment, the removal of hexavalent chromium (Cr(VI)) by g-C3N4 increased from 48% to 93%. The photocatalytic materials were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET) and UV-vis diffuse reflectance spectra (UV-vis). In summary, this study confirmed that citric acid can improve the photocatalytic activity of g-C3N4 by increasing its specific surface area and the active site of the photocatalytic material so as to achieve the purpose of removing hexavalent chromium from water. [ABSTRACT FROM AUTHOR]