Search

The ternary strategy has proven to be an effective method for improving the efficiency of organic solar cells (OSCs). However, designing and selecting the third component still pose challenges. In this study, this issue is addressed by focusing on the PBDB‐T:Y18‐F binary system and introducing a new, strong luminescent, asymmetric small‐molecule acceptor (SMA) called L8‐CBIC‐Cl, which shares a similar skeleton with Y18‐F. The similarity in molecular framework facilitates good compatibility between the two acceptors, resulting in the formation of an alloy‐like acceptor phase. Furthermore, the norbornenyl‐modified end group in L8‐CBIC‐Cl contributes to its strong luminescent properties, which in turn leads to a low non‐radiative energy loss and a high open‐circuit voltage. Consequently, the PBDB‐T:L8‐CBIC‐Cl:Y18‐F based ternary devices realize a high power conversion efficiency (PCE) up to 17.01%, which is higher than PBDB‐T:Y18‐F device (14.49%). Importantly, L8‐CBIC‐Cl exhibits a good universality as a guest acceptor in other three binary systems (D18:Y6, D18:BTP‐eC9‐4F, and D18:L8‐BO). The D18:L8‐BO:L8‐CBIC‐Cl device shows an impressive efficiency of 19%. The work demonstrates that employing SMA with a high PLQY and better miscibility with host acceptor as the third component has a great potential for developing high‐efficiency ternary OSCs. [ABSTRACT FROM AUTHOR]

In the development of high‐performance organic solar cells (OSCs), the self‐organization of organic semiconductors plays a crucial role. This study focuses on the precisely manipulation of molecular assemble via tuning alkyl side‐chain topology in a series of low‐cost nonfused‐ring electron acceptors (NFREAs). Among the three NFREAs investigated, DPA‐4, which possesses an asymmetric alkyl side‐chain length, exhibits a tight packing in the crystal and high crystallinity in the film, contributing to improved electron mobility and favorable film morphology for DPA‐4. As a result, the OSC device based on DPA‐4 achieves an excellent power conversion efficiency of 16.67 %, ranking among the highest efficiencies for NFREA‐based OSCs. [ABSTRACT FROM AUTHOR]

In the development of high‐performance organic solar cells (OSCs), the self‐organization of organic semiconductors plays a crucial role. This study focuses on the precisely manipulation of molecular assemble via tuning alkyl side‐chain topology in a series of low‐cost nonfused‐ring electron acceptors (NFREAs). Among the three NFREAs investigated, DPA‐4, which possesses an asymmetric alkyl side‐chain length, exhibits a tight packing in the crystal and high crystallinity in the film, contributing to improved electron mobility and favorable film morphology for DPA‐4. As a result, the OSC device based on DPA‐4 achieves an excellent power conversion efficiency of 16.67 %, ranking among the highest efficiencies for NFREA‐based OSCs. [ABSTRACT FROM AUTHOR]

Utilizing intermolecular hydrogen‐bonding interactions stands for an effective approach in advancing the efficiency and stability of small‐molecule acceptors (SMAs) for polymer solar cells. Herein, we synthesized three SMAs (Qo1, Qo2, and Qo3) using indeno[1,2‐b]quinoxalin‐11‐one (Qox) as the electron‐deficient group, with the incorporation of a methylation strategy. Through crystallographic analysis, it is observed that two Qox‐based methylated acceptors (Qo2 and Qo3) exhibit multiple hydrogen bond‐assisted 3D network transport structures, in contrast to the 2D transport structure observed in gem‐dichlorinated counterpart (Qo4). Notably, Qo2 exhibits multiple and stronger hydrogen‐bonding interactions compared with Qo3. Consequently, PM6 : Qo2 device realizes the highest power conversion efficiency (PCE) of 18.4 %, surpassing the efficiencies of devices based on Qo1 (15.8 %), Qo3 (16.7 %), and Qo4 (2.4 %). This remarkable PCE in PM6 : Qo2 device can be primarily ascribed to the enhanced donor‐acceptor miscibility, more favorable medium structure, and more efficient charge transfer and collection behavior. Moreover, the PM6 : Qo2 device demonstrates exceptional thermal stability, retaining 82.8 % of its initial PCE after undergoing annealing at 65 °C for 250 hours. Our research showcases that precise methylation, particularly targeting the formation of intermolecular hydrogen‐bonding interactions to tune crystal packing patterns, represents a promising strategy in the molecular design of efficient and stable SMAs. [ABSTRACT FROM AUTHOR]

Utilizing intermolecular hydrogen‐bonding interactions stands for an effective approach in advancing the efficiency and stability of small‐molecule acceptors (SMAs) for polymer solar cells. Herein, we synthesized three SMAs (Qo1, Qo2, and Qo3) using indeno[1,2‐b]quinoxalin‐11‐one (Qox) as the electron‐deficient group, with the incorporation of a methylation strategy. Through crystallographic analysis, it is observed that two Qox‐based methylated acceptors (Qo2 and Qo3) exhibit multiple hydrogen bond‐assisted 3D network transport structures, in contrast to the 2D transport structure observed in gem‐dichlorinated counterpart (Qo4). Notably, Qo2 exhibits multiple and stronger hydrogen‐bonding interactions compared with Qo3. Consequently, PM6 : Qo2 device realizes the highest power conversion efficiency (PCE) of 18.4 %, surpassing the efficiencies of devices based on Qo1 (15.8 %), Qo3 (16.7 %), and Qo4 (2.4 %). This remarkable PCE in PM6 : Qo2 device can be primarily ascribed to the enhanced donor‐acceptor miscibility, more favorable medium structure, and more efficient charge transfer and collection behavior. Moreover, the PM6 : Qo2 device demonstrates exceptional thermal stability, retaining 82.8 % of its initial PCE after undergoing annealing at 65 °C for 250 hours. Our research showcases that precise methylation, particularly targeting the formation of intermolecular hydrogen‐bonding interactions to tune crystal packing patterns, represents a promising strategy in the molecular design of efficient and stable SMAs. [ABSTRACT FROM AUTHOR]

[Display omitted] • Three small molecular acceptors were designed and synthesized. • Noncovalent Conformational Locks and Side-Chain Engineering can adjust the properties of acceptors. • Significantly different power conversion efficiencies of 12.09%, 12.30% and 14.25% are achieved. Three novel small molecular acceptors (SMAs) BO-2F , BO-C8-2F and BO-C2C6-C8-2F were designed and synthesized. These acceptors all possess planar molecular backbone because of the introduction of intramolecular noncovalent interaction. Among them, BO-C2C6-C8-2F with four side chains, which has the highest solubility, can form more appropriate nanomorphology when blending with PBDB-T. Hence, organic solar cells (OSCs) based on PBDB-T: BO-C2C6-C8-2F displayed an outstanding power convesion efficiency (PCE) of 14.25%, which is higher than BO-2F and BO-C8-2F based ones. To the best of our knowledge, the PCE of 14.25% is one of the highest for the OSCs based on A-π-D-π-A type SMAs. Our results have demonstrated that the combination of side-chain engineering and intramolecular conformation lock has a great prospect in the design of high performance SMAs for OSCs. [ABSTRACT FROM AUTHOR]

Two simple dithienosilole unit (DTS)-based nonfused small molecular acceptors (SiOC2C6–4F and SiOC2C6–4Cl) using two DTS moieties linked alkoxyl substituted benzene ring as the central core (D) and bis(5,6-difluro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene)dimalononitrile or bis(5,6-dichloro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene)dimalononitrile as the end groups have been synthesized. The optical, electrochemical properties and device photovoltaic performance of these two molecules were investigated in detail. DFT results indicates S⋯O interactions involving alkoxyl groups of benzyl rings and thienyl S atoms of DTS can act as conformational "locks" to enhance molecular planarity. when the polymer PBDB-T was chosen as the donor, the PBDB-T: SiOC2C6–4F -based device provided a high PCE of 9.68% with a V oc of 0.90 V, a J sc of 17.02 mA/cm2 and an FF of 63.00%, while the PBDB-T: SiOC2C6–4Cl -based device exhibited a PCE of 11.29% with a V oc of 0.87V, a J sc of 20.35 mA/cm2 and an FF of 63.73%, which is so far the best performance reported for organic photovoltaic using silole-based small-molecule acceptors. Simple Dithienosilole unit based nonfused small molecular acceptors based solar cells exhibited a PCE of 11.29%. Image 1 • Two dithienosilole unit-based nonfused small molecular acceptors were synthesized. • S⋯O interactions can serve as conformational "locks" to enhance π-system coplanarity. • SiOC2C6–4Cl exhibit stronger and broader absorption than that of SiOC2C6–4F. • Organic solar cells based on PBDB-T: SiOC2C6–4Cl provide a PCE of 11.29%. [ABSTRACT FROM AUTHOR]

The central core in A‐DA1D‐A‐type small‐molecule acceptor (SMAs) plays an important role in determining the efficiency of organic solar cells (OSCs), while the principles governing the efficient design of SMAs remain elusive. Herein, we developed a series of SMAs with pyrido[2,3‐b]quinoxaline (PyQx) as new electron‐deficient unit by combining with the cascade‐chlorination strategy, namely Py1, Py2, Py3, Py4 and Py5. The introduction of chlorine atoms reduces the intramolecular charge transfer effects but elevates the LUMO values. Density functional theory (DFT) reveals that Py2 with ortho chlorine substituted PyQx and Py5 with two chlorine atoms yield larger dipole moments and smaller π⋅⋅⋅π stacking distances, as compared with the other three acceptors. Moreover, Py2 shows the strongest light absorption capability induced by extended orbit overlap lengths and more efficient packing structures in the dimers. These features endow the best device performance of Py2 due to the better molecular packing and aggregation behaviors, more suitable domain sizes with better exciton dissociation and charge recombination. This study highlights the significance of incorporating large dipole moments, small π⋅⋅⋅π stacking distances and extended orbit overlap lengths in dimers into the development of high‐performance SMAs, providing insight into the design of efficient A‐DA1D‐A‐type SMAs for OSCs. [ABSTRACT FROM AUTHOR]

The central core in A‐DA1D‐A‐type small‐molecule acceptor (SMAs) plays an important role in determining the efficiency of organic solar cells (OSCs), while the principles governing the efficient design of SMAs remain elusive. Herein, we developed a series of SMAs with pyrido[2,3‐b]quinoxaline (PyQx) as new electron‐deficient unit by combining with the cascade‐chlorination strategy, namely Py1, Py2, Py3, Py4 and Py5. The introduction of chlorine atoms reduces the intramolecular charge transfer effects but elevates the LUMO values. Density functional theory (DFT) reveals that Py2 with ortho chlorine substituted PyQx and Py5 with two chlorine atoms yield larger dipole moments and smaller π⋅⋅⋅π stacking distances, as compared with the other three acceptors. Moreover, Py2 shows the strongest light absorption capability induced by extended orbit overlap lengths and more efficient packing structures in the dimers. These features endow the best device performance of Py2 due to the better molecular packing and aggregation behaviors, more suitable domain sizes with better exciton dissociation and charge recombination. This study highlights the significance of incorporating large dipole moments, small π⋅⋅⋅π stacking distances and extended orbit overlap lengths in dimers into the development of high‐performance SMAs, providing insight into the design of efficient A‐DA1D‐A‐type SMAs for OSCs. [ABSTRACT FROM AUTHOR]

Moving one subunit of the central core to the other side in a small‐molecule acceptor (SMA) is an effective approach to achieve the goal of isomerization, which has proven viable to enhance photovoltaic performance. Herein, two isomeric SMAs of ThPy5 and ThPy6 are developed by changing the position of the thiophene unit of the dithieno[3,2‐b:2′,3′‐d]pyrrol in IDTP‐4F. The effect of altering the thiophene position on morphological characteristics, macroscopic factors, and device performance is thoroughly investigated among these three isomeric SMAs. Compared to ThPy5, IDTP‐4F and ThPy6 show planar molecular structures and better molecular orientation. Moreover, tighter π–π stacking as well as enhanced electron mobility is observed in ThPy6 relative to IDTP‐4F. PM6:ThPy6‐based organic solar cells (OSCs) achieve the maximum efficiency of 16.11%, along with an excellent fill factor (FF) of 0.789, which are among the best results for A‐D‐A‐type SMA‐based OSCs. The high FF ascribes to the improved molecular packing and charge collection/extraction efficacy and the reduced charge recombination. The structure–morphology–performance relationship drawn from this work can offer better guidance for designing the molecular structure, especially the central cores of SMAs. [ABSTRACT FROM AUTHOR]

In this work, regio-regular and random polymers (reg-PTF and ran-PTF) comprising benzodithiophene and 3-fluorothiophene units are developed to investigate the influence of polymer chain regularity on the photovoltaic performance. Interestingly, reg-PTF exhibits higher HOMO energy level (∼0.2 eV) than that of ran-PTF due to the more ordered molecular structure and higher crystallization. As the result, the HOMO energy level offset between donor and acceptor can be well controlled by selecting different acceptors. Using BTP-ec9-4F with a much deep HOMO energy level as acceptor, reg-PTF-based devices display an inferior PCE of 7.66% compared with ran-PTF based ones (11.78%) due to the too large HOMO energy levels offset. When blending with Y18-1F, the PCE of reg-PTF-based devices is increased to 13.23% due to the appropriate energy level. In comparison, the ran-PTF-based devices nearly do not work because of the negative HOMO energy levels offset. This work indicates that both the polymer chain regularity and the energy level offset between the donor and acceptor material are important to the performance of organic solar cells. [ABSTRACT FROM AUTHOR]

Abstract Side-chain engineering could tune the crystallinity, solubility and aggregation styles of fused-ring electron acceptors (FREAs), and thus could influence the morphology and charge carrier mobility of blend films as well as the final device performances. Herein, we developed a novel FREA called spiro -IDT- O -IC , which is composed of a spiro-bridged IDT core and two 1,1-dicyanomethylene-3-indanone (IC) terminal units. Similar acceptor molecule IDT- O -IC with four 4-octyloxyphenyl side chains is also prepared for the control experiment. The absorptions, energy levels, molecular configurations, and electronic wave functions of these two acceptor molecules have been comparatively studied. Polymer solar cells (PSCs) fabricated with PBDB-T: spiro -IDT- O -IC as the active layer demonstrated a PCE of 6.23% with a J sc of 11.76 mA/cm2, a V oc of 0.84 V and an FF of 0.63. To the best of our knowledge, this is the first report that a spiro-bridged ladder type core was used for the fabrication of fused ring acceptors. Graphical abstract Image 1 Highlights • Lateral fluorene introduced into the molecular skeleton in a perpendicular way. • Bulky side chains of spiro -IDT- O -IC to regulate its aggregation in blend films. • First report of a spiro-bridged ladder core used for A-D-A fused ring acceptors. [ABSTRACT FROM AUTHOR]

Non-fused ring electron acceptors with varied substituents were developed to construct efficient organic solar cells (OSCs). Out-of-plane rigid substituents such as 2-methylphenyl, 2- tert -butylphenyl and diphenylamine were introduced to the central benzene unit to improve the solubility of non-fused ring acceptors and noncovalent interactions such as O⋯S and N⋯S were used to enhance the planarity of molecular backbones. Blend films based on PBDB-T and these acceptors displayed better morphology without oversized aggregates formed. As-cast devices based on SM1 , SM2 and SM3 exhibited power conversion efficiencies of 5.96%, 6.43% and 6.80%, respectively. Image 1 • We designed three non-fused acceptors with varied substituents to construct efficient organic solar cells (OSCs). • Three electron acceptors could form strong intermolecular aggregations in films. • The morphology of blend films based on PBDB-T and acceptors displayed nanofibril network structure. • Simple non-fused acceptors are promising in achieving low-cost and high performance organic solar cells. [ABSTRACT FROM AUTHOR]