499 results on '"Zhang, Cunsheng"'
Search Results
2. Achieving the strength-ductility synergy in ultra-fined grained CNT/2024Al composites via a low-temperature aging strategy
3. Dynamic precipitation and recrystallization behavior during hot deformation of Al-Zn-Mg-Cu alloy: Experiment and modeling
4. Enhancing strength and ductility of extruded Ti-alloy-reinforced Al-Mg-Si composites: Roles of interface nanostructures and chemical bonding
5. Microstructure characterization and solid welding mechanism of TiB2/6061Al composite profile fabricated by porthole die extrusion
6. Fabrication of TiB2/6061Al composite with tailoring heterostructure and superior mechanical properties and investigation on deformation behaviors
7. Atomic strain concentration induced by interfaces in extruded carbon nanotube reinforced 2024Al matrix composite
8. Tailoring interfacial structure and achieving excellent strength-ductility synergy of Al/Mg/Al composite via porthole die co-extrusion and post-annealing
9. Low-frequency vibration assisted self-pierce riveting (LV-SPR) of carbon fiber reinforced composite and aluminum alloy
10. Dynamic evolution of the T1 phase and its effect on continuous dynamic recrystallization in Al–Cu–Li alloys
11. Novel interface characteristics and strengthening mechanisms in extruded fiber(Ti)-reinforced Al-based composites
12. Sustainable bio-manufacturing of D-arabitol through combinatorial engineering of Zygosaccharomyces rouxii, bioprocess optimization and downstream separation
13. Strategy for suppressing abnormal grain growth of ZK60 Mg alloy during solution by pre-compression: A quasi-in-situ study
14. Fabrication of Al/Al-TiB2 laminate composites via hot press sintering process: An insight into the mechanical properties and fracture behavior
15. Re-dissolution behavior of secondary phases and mechanical response of CNT/2024Al composites
16. The formation mechanisms and mechanical effects of lattice defects in carbon nanotube reinforced 2024Al composite
17. A comprehensive review of recent advances in the characterization of L-rhamnose isomerase for the biocatalytic production of D-allose from D-allulose
18. Rewiring Bacillus subtilis and bioprocess optimization for oxidoreductive reaction-mediated biosynthesis of D-tagatose
19. Experimental study on tensile deformation behaviors under room and elevated temperatures induced by microstructure inhomogeneity of ZK60 Mg with a longitudinal weld
20. Hot compressive deformation behavior and microstructural evolution of the spray-formed 1420 Al–Li alloy
21. Strengthening and toughening mechanisms of tailored Al/Al-TiB2 laminated composites fabricated by hot press sintering process
22. A preliminary study on polysaccharide extraction, purification, and antioxidant properties of sugar-rich filamentous microalgae Tribonema minus
23. Suppressing abnormal grain growth and switching precipitation behaviors in ZK60 Mg profile by inducing pre-tension
24. Super high flux oil/water separation and efficient separation of water-in-oil emulsions by a versatile superhydrophobic multi-walled carbon nanotubes coating
25. Enhancing biomass productivity towards carbohydrates and fatty acids biosynthesis under the effects of magneto-electric composite fields on filamentous algae
26. Addition of chlorophyll microcapsules to improve the quality of fresh wheat noodles
27. Impact of particle size of cell carrier on caproate fermentation in a cell immobilized system: Focusing on the improvement of caproate production in batch and continuous operation modes
28. Deformation mechanism of as-extruded Al–Cu–Li alloy with heterogeneous fiber structure
29. Micro-/nano-scale structure and elemental diffusion in the Al/Ti/Al sandwich structure
30. Micro-/nano-scale interface structure and mechanical characteristics of the Al/Ti composite bar produced by a novel continuously-extruded technique
31. Efficient caproate production from ethanol and acetate in open culture system through reinforcement of chain elongation process
32. Forming limit analysis of AA5052 sheet under bilinear strain path by designing a novel large-scale gripping fixture
33. Mechanical properties and microstructural evolution of the spray formed 2195 Al–Li alloy extruded sheet at warm temperatures
34. Optimizing mixotrophic cultivation of oil-rich Tribonema minus using volatile fatty acids and glycerin: A promising approach for pH-controlling and enhancing lipid productivity
35. Coupled crystal plasticity and micromechanics damage model based on viscoplastic self-consistent theory and X-ray computed tomography
36. Biocatalytic gateway to convert glycerol into 3-hydroxypropionic acid in waste-based biorefineries: Fundamentals, limitations, and potential research strategies
37. Precipitation behavior and its effect on the dynamic recrystallization of a novel extruded Al-Cu-Li alloy
38. Nanoscale analysis of interfacial structure and its effects on mechanical properties of Mg/Al laminate reinforced by TiB2 particles
39. Influence of organic load on biogas production and response of microbial community in anaerobic digestion of food waste
40. Effects of artificial aging on precipitation behavior, mechanical properties and corrosion resistance of Si3N4/6061Al composite fabricated by sintering and hot extrusion processes
41. Fabrication and strengthening mechanism of dual-phased and bimodal-sized (Si3N4p + TiB2p)/6061Al hybrid composite
42. Magnetic/electric field intervention on oil-rich filamentous algae production in the application of acrylonitrile butadiene styrene based wastewater treatment
43. Effects of TiB2 particle and local aspect ratio on microstructure and mechanical properties of an I-shaped TiB2/6061Al composite profile
44. Biomass production of carbohydrate-rich filamentous microalgae coupled with treatment and nutrients recovery from acrylonitrile butadiene styrene based wastewater: Synergistic enhancement with low carbon dioxide supply strategy
45. Enhancing mechanical properties and corrosion resistance of a high strength 7A99 Al alloy by introducing pre-rolling in solution and aging treatments
46. Effect of stress-aging treatment on the mechanical and corrosion properties of Al−Zn−Mg−Cu alloy
47. Aging precipitation and its effects on mechanical properties of TiB2 particulate reinforced 7075Al composite
48. Atomic diffusion mechanism and interface nanomechanics in the Al/Ti composite structures
49. Evolution mechanisms of charge weld during porthole die extrusion of ZK60 Mg profile
50. An Investigation on the Anisotropic Plastic Behavior and Forming Limits of an Al-Mg-Li Alloy Sheet
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.