Search

The new version of the gear accuracy standard GB/T 10095.1—2022 has been released, and the standard of accuracy of rack is written with reference to the gear accuracy standard. The manufacturing technology and the processing accuracy of racks have changed greatly, so the standard of accuracy of rack has been revised. The main differences between the 2022 version of the standard of accuracy of rack and the 1988 version are: terms and symbols; definition of total tooth profile deviation; measurement of the rack pair; adding the parts detection method of flame cutting large modulus racks for lifting and lowering of offshore platforms, as well as five measurement tools that can be used in the production process of racks. Analysis is conducted concerning the added and the revised parts.

The unreasonable use of antibiotics is one of the important causes of antimicrobial resistance (AMR) that poses a huge public health threat. Magnolol is a traditional Chinese medicine exhibiting antibacterial-, antifungal-, anti-inflammatory-, and antioxidant activities. However, it is unclear whether magnolol has an inhibitory effect on mycoplasma. This study found that magnolol showed excellent inhibitory activity against various mycoplasmas. Magnolol showed dose-dependent inhibition of Mycoplasma synoviae growth and biofilm formation in vitro. Magnolol caused severely sunken and wrinkled M. synoviae cell membranes at the minimum inhibitory concentration, and an enlarged cell diameter. The chicken embryo infection model showed that magnolol significantly reduced M. synoviae pathogenicity in vivo. Kyoto Encyclopedia of Genes and Genomes pathway analysis showed that the citrate cycle, glycolysis/gluconeogenesis, and pyruvate metabolism were significantly disturbed at the minimum inhibitory concentration of magnolol. Interestingly, 41% of differential metabolites were in the categories of lipids and lipid-like molecules. Protegenin A was up-regulated 58752-fold after magnolol treatment. It belongs to fatty acyls, and destroys cell membrane integrity and cell activity. Ghosphatidylethanolamine, phosphatidylglycerol, phosphatidic acid, and phosphatidylserine related to membrane maintenance and stress response were widely down-regulated. Collectively, our results illustrate the feasibility of magnolol as a phytochemical compound to treat mycoplasma infection.

BackgroundThere is usually a strong coupling of neutronics-thermal hydraulics (N-TH) fields inside nuclear reactors.PurposeThis study aims to accurately simulate the multi-physics fields in nuclear reactors by developing a three-dimensional N-TH coupling code MORPHY tailored to advanced complex reactors.MethodsFirst of all, a three-dimensional triangular-z nodal variational nodal method (VNM) was employed for neutronics calculation. and the stiffness confinement method (SCM) was used to solve the neutron temporal-spatial equation; thermal hydraulic calculations were based on the one-dimensional multi-channel model and the one-dimensional cylindrical thermal conductivity model. Then, the accuracy of neutron dynamics was verified by TWIGL benchmark, Dodds benchmark, and the typical pressurized water reactor (PWR) benchmark NEACRP. Finally, the effects of different coupling methods and angle discrete orders on the results were analyzed and compared against reference solutions by PARCS.ResultsVerification results of TWIGL benchmark show that the deviation of relative power from the reference results is less than 0.5%. Compared with the results of Dodds benchmark, it verifies the MORPHY code's ability to describe unstructured meshes. The transient coupling calculation capability of MORPHY is verified by NEACRP benchmark.ConclusionsNumerical solutions by MORPHY are in good agreement with reference results of the TWIGL, Dodds and NEACRP benchmark problems. It is concluded that MORPHY can adapt to the transient N-TH coupling analysis of nuclear reactor cores.

The environmental control system in most commercial airliner cabins supplies air from shoulder and ceiling level and exhausts air at floor level on both sides of the cabin walls. The ventilation system mixes air in the cabins to create a relative uniform air temperature distribution which is great for passengers’ thermal comfort. However, the mixing ventilation also enhances airborne contaminant transfer. Many displacement ventilation methods have been proposed to use in aircraft cabins, but the disadvantages of the ventilation approach are usually creating draft on the passengers’ ankles and high air temperature stratification between passengers’ heads and feet. This investigation developed an aisle displacement ventilation (ADV) system which can reduce air temperature stratification effectively without occupying the legroom space under the seats, so it is good for passengers and crew members’ comfort and friendly for luggage storage, in addition, it can also be easily installed in aircraft cabins. By installing the system in a five-row, twin-aisle cabin mockup, our study found that the ADV system can create a low air velocity distribution in the cabin and can maintain an acceptable air temperature stratification without draft. The system created an uprising airflow which can effectively remove airborne contaminant which was generated from index passengers’ respiratory activities. The experimental data were used to validate a computational-fluid-dynamics (CFD) program. The validated CFD program was used to compare the ADV with under-seat displacement ventilation (USDV) and underfloor air distribution (UFAD) system along the aisles. The comparison results show that the ADV had obvious better thermal comfort than the other two systems, and the cabin air quality of the three ventilation systems was similar, all far better than the “perfectly-mixed” ventilated condition.

BackgroundWith the improvement of the understanding of the physical mechanism of neutron transport and the development of high performance computing technology, high-fidelity neutronics calculation has attracted widespread attention worldwide. Both deterministic method and Monte Carlo method are employed by various institutions to achieve high-fidelity goals. NECP-X code uses one-step deterministic method whilst OpenMC uses the Monte Carlo method.PurposeThis study aims to verify the feasibility and accuracy of both NECP-X and OpenMC in modelling high-fidelity reactor cores.MethodsBased on BEAVRS2.0.1 benchmark, two high-fidelity models for pressurized water reactor (PWR), i.e., MODEL 1 consisted of 21 fuel assemblies and MODEL 2 consisted of 193 fuel assemblies, were established. Then, NECP-X (one-step deterministic method) and OpenMC (Monte Carlo method) were respectively adopted in these two high-fidelity models to calculate the effective multiplication factor, the reactor power distribution and the control rod worth of different control rod assemblies inserted in the hot zero power (HZP) condition. Finally, calculated results were compared and analyzed.ResultsUnder the HZP condition, the effective multiplication factor deviation between NECP-X and OpenMC is less than 1.40×10-3. The effective multiplication factor deviation of different control rod assemblies inserted is less than 5.9×10-4, and the deviation of control rod worth is less than 4.9×10-4. The average relative deviations of the reactor power distribution between NECP-X and OpenMC are less than 0.6%.ConclusionsNumerical results calculated by two different codes are in good agreement with each other. The feasibility and accuracy of NECP-X and OpenMC in high-fidelity reactor core modeling are preliminarily verified in this study, which lays a foundation for future applications and improvements.

Prompt prediction of the airborne gaseous pollutant transport is important to design a safe and comfortable air environment in an aircraft cabin. This paper proposes a model based on Markov chain to fulfill the task, in which the gaseous pollutant can be released from a source with an arbitrary profile. The model first obtains the airflow field by CFD to construct a transport probability matrix of the gaseous pollutant, then predicts the concentration field at each time step when an impulse is released at the known source location using the transport probability matrix. Finally, detailed trace of the pollutant released from the source with an arbitrary profile can be reproduced by linear superposition. The above strategy is applied on a two-dimensional aircraft cabin with gaseous pollutant released from one passenger for 2s. Results show that the proposed model is able to correctly predict the gaseous pollutant transport in only a few minutes. More than 90% of the computing time can be saved comparing with that from CFD without sacrificing much accuracy.

The combustion method, due to its convenience and high-efficiency in harmless treatment, has been widely used in disposal of wastewater. With a wastewater burner as the study case, we performed numerical simulation by the Fluent software, analyzed the flowing and combustion process of the wastewater samples in the burner, compared the combustion effect of different atomization conditions — the spray cone model (hollow cone model, solid cone model), the spray angle, non-uniform grain size, uniform grain size. The study aims to provide suggestions for design and selection of wastewater burners.

A deep learning based surrogate model is proposed for replacing the conventional diffusion equation solver and predicting the flux and power distribution of the reactor core. Using the training data generated by the conventional diffusion equation solver, a special designed convolutional neural network inspired by the FCN (Fully Convolutional Network) is trained under the deep learning platform TensorFlow. Numerical results show that the deep learning based surrogate model is effective for estimating the flux and power distribution calculated by the diffusion method, which means it can be used for replacing the conventional diffusion equation solver with high efficiency boost.

Subject to the blowing air, fungal spores can be aerosolized from the colonies growing on cooling coils. The blowing air may accelerate and decelerate when passing a coil. The caused spore detachment may be different, when the fungal colonies grow on different positions of the coil. This study investigated the aerosolization of Aspergillus niger spores from a colony on a circular tube in a wind tunnel. The colony was first cultured in the carved groove along the longitudinal tube, and then the spores were aerosolized by a gradual increase of the blowing air speed. The grown colony on four different positions of the coil surface were blown for aerosolization. In addition, the airflow surrounding the circular tube was numerically solved to estimate the drag force for aerosolization of the spores. The results revealed that the collected airborne spores when the colonies were located tangentially to the upcoming airflow were six to eight times of those when the colonies were located parallel with the upcoming airflow for both the 4-day-old and 10-day-old colonies. The local air speeds in different positions of the tube were highly different from the inlet air speed of the wind tunnel. Such difference should be accounted for when estimating the drag force to aerosolize the fungal spores on the coils.

Cabin ventilation is crucial for maintaining thermal comfort and air quality for passengers and crew. The genetic algorithm, proper orthogonal decomposition (POD), and adjoint method have been proposed to inversely design the cabin ventilation. However, each method has its cons and pros. This paper proposed to integrate the above three methods in cascades. The genetic algorithm was applied first in the first stage to roughly circumscribe the ranges of design parameters. Then POD was applied in the next stage to further narrow the ranges and estimate the optimal parametric sets for each design criterion. The estimated optimal design from POD was supplied to the adjoint method for fine tuning. The air-supply parameters of a five-row aircraft cabin were inversely designed to achieve the minimum absolute value of the predicted mean vote (PMV) and the minimum averaged mean age of air. The results showed that the integrated method was able to improve the design stage by stage. The integrated method has superior advantages to assure the optimal design while minimizing the computing expense.