441 results on '"Zhao, X.J."'
Search Results
2. Improving mechanical properties of an additively manufactured high-entropy alloy via post thermomechanical treatment
3. Effect of annealing treatments on microstructure and mechanical properties of high-entropy alloy Cr10 Mn10Fe60Co10Ni10
4. Effects of twin-boundary precipitates on twin stability and yield strength of a Mg-Nd-Ag-Zr alloy
5. Dynamic response of equiatomic and non-equiatomic CrMnFeCoNi high-entropy alloys under plate impact
6. Orientation relationships of impact-induced phase transformation in high entropy alloy HfZrTiTa0.53
7. Mechanical properties and deformation mechanisms of C-doped interstitial high-entropy alloy CrMnFeCoNi: Effects of strain rate and C content
8. Effect of the subsolvus and supersolvus solution treatments on the basket-weave microstructure, room and high temperature properties of TC21 alloy
9. Dynamic compression responses of heterogeneous-structured CrMnFeCoNi high-entropy alloy at cryogenic temperatures
10. Strength-ductility synergy in twinned titanium fabricated via dynamic equal channel angular pressing and heat treatment
11. Impact response of metastable dual-phase high-entropy alloy Cr10Mn30Fe50Co10
12. Effect of minor elements Al and Ti on dynamic deformation and fracture of CoCrNi-based medium-entropy alloys
13. Active {11[formula omitted]1} and {10[formula omitted]2} extension twinning in a WE43 Mg alloy
14. Dynamic mechanical properties, deformation and damage mechanisms of eutectic high-entropy alloy AlCoCrFeNi2.1 under plate impact
15. Phase transitions in additively manufactured high-entropy alloy [formula omitted] induced by high strain rate compression
16. Shock compression and spallation damage of high-entropy alloy Al0.1CoCrFeNi
17. Preparation and high temperature properties of Nb/Y2O3 coating on the pure Nb substrate by laser cladding
18. Shock compression and spallation of a medium-entropy alloy Fe40Mn20Cr20Ni20
19. Deformation and damage of heterogeneous-structured high-entropy alloy CrMnFeCoNi under plate impact
20. Atomic structure and evolution of a precursor phase of Ω precipitate in an Al-Cu-Mg-Ag alloy
21. Effects of slip ratio and contact stress on rolling contact fatigue of defected rail materials
22. Rate-dependent strength and deformation heterogeneity of B4C-reinforced Al composite: Time-resolved imaging with synchrotron X-rays
23. Characteristics of the vertical distribution of tropospheric ozone in late autumn at Yangjiang station in Pearl River Delta (PRD), China. PartⅠ: Observed event
24. Effect of spherical and ballast dents on rolling contact fatigue of rail materials
25. An innovative model for the prediction of wheel - Rail wear and rolling contact fatigue
26. Krebs von den Lungen-6 associated with chest high-resolution CT score in evaluation severity of patients with interstitial lung disease
27. Enhancing dispersion of ultra-fine WC powders in aqueous media
28. The influence of wheel flats formed from different braking conditions on rolling contact fatigue of railway wheel
29. Effect of spherical dents on microstructure evolution and rolling contact fatigue of wheel/rail materials
30. Achieving ultra-high hardness of nanostructured Mg-8.2Gd-3.2Y-1.0Zn-0.4Zr alloy produced by a combination of high pressure torsion and ageing treatment
31. The effect of decarburized layer on rolling contact fatigue of rail materials under dry-wet conditions
32. Active {112¯1} and {101¯2} extension twinning in a WE43 Mg alloy
33. Kinetic study of electroless cobalt deposition on WC particles
34. The effect of SiC addition on the dimensional stability of Al-Cu-Mg alloy
35. Altered ageing behaviour of a nanostructured Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr alloy processed by high pressure torsion
36. On the formation and damage mechanism of rolling contact fatigue surface cracks of wheel/rail under the dry condition
37. Metastable precipitate phases in Mg–9.8 wt%Sn alloy
38. The effect of stress-aging on dimensional stability behavior of Al-Cu-Mg alloy
39. Ultraviolet radiation over China: Spatial distribution and trends
40. Study on wear and rolling contact fatigue behaviors of wheel/rail materials under different slip ratio conditions
41. Effects of decarburization on the wear resistance and damage mechanisms of rail steels subject to contact fatigue
42. Phase transitions in additively manufactured high-entropy alloy Cr10Mn10Fe60Co10Ni10 induced by high strain rate compression
43. SiC and ZrN nano-particulate reinforced AlON composites: Preparation, mechanical properties and toughening mechanisms
44. Millimeter wave characteristics of intrinsic Josephson junctions with planar equiangular spiral antenna in misaligned Tl2Ba2CaCu2O8 thin film
45. Microstructure and mechanical properties of columnar-grained copper produced by the Ohno continuous casting technique
46. Millimeter wave inducing subharmonic steps in the Tl2Ba2CaCu2O8 thin film bicrystal Josephson junction
47. Effects of vibration aging on residual stress and performance of instrument-grade TiC reinforced steel matrix composite
48. Fabrication and mechanical properties of silicon carbide–aluminum oxynitride nanocomposites
49. Millimeter-wave induced sloping step in Tl2Ba2CaCu2O8 misaligned thin film
50. Structure and optical properties of amorphous Ge–Se films prepared by pulsed laser deposition
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.