Search

Lei Song, Zheng-liang Zhi, John C PickupDiabetes Research Group, King's College London School of Medicine, Guy's Hospital, London, United KingdomAbstract: Current oral insulin formulations reported in the literature are often associated with an unpredictable burst release of insulin in the intestine, which may increase the risk for problematic hypoglycemia. The aim of the study was to develop a solution based on a nanolayer encapsulation of insulin-chitosan complexes to afford sustained release after oral administration. Chitosan/heparin multilayer coatings were deposited onto insulin-chitosan microparticulate cores in the presence of poly(ethylene) glycol (PEG) in the precipitating and coating solutions. The addition of PEG improved insulin loading and minimized an undesirable loss of the protein resulting from redissolution. Nanolayer encapsulation and the formation of complexes enabled a superior loading capacity of insulin (>90%), as well as enhanced stability and 74% decreased solubility at acid pH in vitro, compared with nonencapsulated insulin. The capsulated insulin administered by oral gavage lowered fasting blood glucose levels by up to 50% in a sustained and dose-dependent manner and reduced postprandial glycemia in streptozotocin-induced diabetic mice without causing hypoglycemia. Nanolayer encapsulation reduced the possibility of rapid and erratic falls of blood glucose levels in animals. This technique represents a promising strategy to promote the intestinal absorption efficiency and release behavior of the hormone, potentially enabling an efficient and safe route for oral insulin delivery of insulin in diabetes management.Keywords: oral insulin, diabetes mellitus, insulin-chitosan complexes, multilayer nanoencapsulation, polyethylene glycol, chitosan, heparin

Graphene oxide (GO) is increasingly used for controlling mass diffusion in hydrogel-based drug delivery applications. On the macro-scale, the density of GO in the hydrogel is a critical parameter for modulating drug release. Here, we investigate the diffusion of a peptide drug through a network of GO membranes and GO-embedded hydrogels, modelled as porous matrices resembling both laminated and 'house of cards' structures. Our experiments use a therapeutic peptide and show a tunable nonlinear dependence of the peptide concentration upon time. We establish models using numerical simulations with a diffusion equation accounting for the photo-thermal degradation of fluorophores and an effective percolation model to simulate the experimental data. The modelling yields an interpretation of the control of drug diffusion through GO membranes, which is extended to the diffusion of the peptide in GO-embedded agarose hydrogels. Varying the density of micron-sized GO flakes allows for fine control of the drug diffusion. We further show that both GO density and size influence the drug release rate. The ability to tune the density of hydrogel-like GO membranes to control drug release rates has exciting implications to offer guidelines for tailoring drug release rates in hydrogel-based therapeutic delivery applications., (© 2018 The Authors.)

A spontaneous multilayer deposition approach for presenting therapeutic proteins onto pancreatic islet surfaces, using a heparin polyaldehyde and glycol chitosan alternating layering scheme, has been developed to enable the nanoscale engineering of a microenvironment for transplanted cells. The nanocoating incorporating α1-antitrypsin, an anti-inflammatory protein, exhibited effective anti-coagulant activities in vitro.

A novel strategy for delivering functionalised superparamagnetic iron oxide nanoparticles to the outer surface of pancreatic islet grafts, using chemically modified polymeric nanolayers, has been developed for tracking of engrafted pancreatic islets by magnetic resonance imaging.

Nanothickness encapsulation using a layer-by-layer technique has applications in several areas of diabetes research, including improved glucose sensors, islet cell transplantation and oral insulin delivery. We have fabricated microvesicles containing a fluorescence lifetime-based glucose sensing system, with bacterial glucose-binding protein as the glucose receptor. Such sensors are suitable for impregnation in the dermis as a 'smart tattoo' type of non-invasive glucose monitoring technology. Nanoencapsulation of islet cells is intended to alleviate the immediate blood-mediated inflammatory reaction which is responsible for early islet loss post-transplant. In an allogeneic diabetic mouse model, nanoencapsulated islets with phosporylcholine-modified polysaccharide coating, significantly extended survival of transplanted islets. In early studies aimed at formulating an effective oral insulin preparation, insulin-chitosan colloids coated with nanolayers of chitosan and heparin had enhanced acid stability and effectively lowered blood glucose in an animal model., (Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.)

We review progress in our laboratories toward developing in vivo glucose sensors for diabetes that are based on fluorescence labeling of glucose/galactose-binding protein. Measurement strategies have included both monitoring glucose-induced changes in fluorescence resonance energy transfer and labeling with the environmentally sensitive fluorophore, badan. Measuring fluorescence lifetime rather than intensity has particular potential advantages for in vivo sensing. A prototype fiber-optic-based glucose sensor using this technology is being tested., (© 2013 Diabetes Technology Society.)

Islet transplantation as a therapy for type 1 diabetes is currently limited by lack of primary transplant material from human donors and post-transplantation loss of islets caused by adverse immune and nonimmune reactions. This study aimed to develop a novel strategy to create microenvironment for islets via integration of nanoencapsulation with cell cocultures, thereby enhancing their survival and function. The nanoencapsulation was achieved via layer-by-layer deposition of phosphorycholine-modified poly-L-lysine/heparin leading to the formation of nanometer-thick multilayer coating on islets. Spheroids formed by coculturing MIN6 β-cells with mesenchymal stem cells in suspension were used as the tool for testing encapsulation. Coculturing MSCs with MIN6 cells allowed the cell constructs to enhance structural and morphologic stability with improved insulin secretory function and render them less susceptible to inflammatory cytokine-induced apoptosis. Combining nanoencapsulation with coculture of MSCs/MIN6 resulted in higher glucose responsiveness, and lower antibody binding and apoptosis-inducing effects of cytokines. This strategy of nanoencapsulating islet cocultures appears promising to improve cellular delivery of insulin for treating type 1 diabetes., (Copyright © 2012 Wiley Periodicals, Inc.)

Aims/hypothesis: The success of islet transplantation as a treatment for type 1 diabetes is currently hampered by post-transplantation loss of functional islets through adverse immune and non-immune reactions. We aimed to test whether early islet loss can be limited and transplant survival improved by the application of conformal nano-coating layers to islets., Methods: Our novel coating protocol used alternate layers of phosphorylcholine-derived polysaccharides (chitosan or chondroitin-4-sulphate) and alginate as coating materials, with the binding based on electrostatic complexation. The in vitro function of encapsulated mouse islets was studied by analysing islet secretory function and cell viability. The in vivo function was evaluated using syngeneic and allogeneic transplantation in the streptozotocin-induced mouse model of diabetes., Results: Nano-scale encapsulated islets retained appropriate islet secretory function in vitro and were less susceptible to complement- and cytokine-induced apoptosis than non-encapsulated control islets. In in vivo experiments using a syngeneic mouse transplantation model, no deleterious responses to the coatings were observed in host animals, and the encapsulated islet grafts were effective in reversing hyperglycaemia. Allo-transplantation of the nano-coated islets resulted in preserved islet function post-implantation in five of seven mice throughout the 1 month monitoring period., Conclusions/interpretation: Nano-scale encapsulation offers localised immune protection for implanted islets, and may be able to limit early allograft loss and extend survival of transplanted islets. This versatile coating scheme has the potential to be integrated with tolerance induction mechanisms, thereby achieving long-term success in islet transplantation.

This paper describes the use of a layer-by-layer nanocoating technique for the encapsulation of insulin-producing pancreatic beta-cell spheroids (pseudoislets) within chitosan/alginate multilayers. We used pseudoislets self-organized from a population of the insulinoma cell line MIN6, derived from a transgenic mouse expressing the large T-antigen of SV40 in pancreatic beta-cells, as an experimental model for the study of cell nanoencapsulation. The maintenance of spheroid morphology and retention of cell viability and metabolic functionality was demonstrated postencapsulation. By depositing an additional protein-repelling phosphorylcholine-modified chondroitin-4-sulfate layer, the coatings were found to shield effectively access of large molecules of the immune systems to the antigen-presenting cell surfaces. Transmission electron microscopy analysis of the encapsulated pseudoislets revealed that the coating did not damage the cell structure. In addition, nanoencapsulation permits the cells to respond to changes in extracellular glucose and other insulin secretagogues by releasing insulin with a profile similar to that of nonencapsulated cells. These results suggest that this nanofilm encapsulation technique has the characteristics required for the efficient transplantation of cellular engineered beta-cells as a cell replacement therapy for type 1 diabetes. This encapsulation method is general in scope and has implications for use in a variety of cellular therapeutics employing engineered tissues from cells generated in vitro from various sources, including those using genetic and cellular engineering techniques.

We aimed to develop microsensors for eventual glucose monitoring in diabetes, based on fluorescence lifetime changes in glucose/galactose-binding protein (GBP) labelled with the environmentally sensitive fluorophore dye, badan. A mutant of GBP was labelled with badan near the binding site, the protein adsorbed to microparticles of CaCO(3) as templates and encapsulated in alternating nano-layers of poly-L-lysine and heparin. We used fluorescence lifetime imaging (FLIM) with two-photon excitation and time-correlated single-photon counting to visualize the lifetime changes in the capsules. Addition of glucose increased the mean lifetime of GBP-badan by a maximum of approximately 2 ns. Analysis of fluorescence decay curves was consistent with two GBP states, a short-lifetime component (approximately 0.8 ns), likely representing the open form of the protein with no bound glucose, and a long-lifetime component (approximately 3.1 ns) representing the closed form with bound glucose and where the lobes of GBP have closed round the dye creating a more hydrophobic environment. FLIM demonstrated that increasing glucose increased the fractional proportion of the long-lifetime component. We conclude that fluorescence lifetime-based glucose sensing using GBP encapsulated with nano-engineered layer-by-layer films is a glucose monitoring technology suitable for development in diabetes management.

This chapter describes two methods for fabricating microarrays of saccharides for display and interrogation with binding proteins, using fluorescence detection. The first approach is based on the rapid immobilization of heparan sulphate glycans upon commercially available aminosilane slides via their reducing ends. The second approach is based on the use of a hydrazide-derivatized self-assembled monolayer (SAM) on a gold-coated slide surface. Both provide for efficient and chemoselective attachment and anchoring of oligosaccharide probes via their reducing ends, enabling the large-scale arraying of natural saccharides without cumbersome pre-derivatization. The latter platform, in particular, also has the potential for use with other biophysical readout methods including matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy, surface plasmon resonance, and quartz crystal microbalances. These microarray platforms provide a facile approach for interrogating multiple carbohydrate-protein interactions in a high-throughput manner using minimal quantities of reagents. They provide an essential new experimental strategy in the growing armoury of the glycomics toolkit.

Nanomedicine involves measurement and therapy at the level of 1-100 nm. Although the science is still in its infancy, it has major potential applications in diabetes. These include solving needs such as non-invasive glucose monitoring using implanted nanosensors, with key techniques being fluorescence resonance energy transfer (FRET) and fluorescence lifetime sensing, as well as new nano-encapsulation technologies for sensors such as layer-by-layer (LBL) films. The latter might also achieve better insulin delivery in diabetes by both improved islet encapsulation and oral insulin formulations. An 'artificial nanopancreas' could be an alternative closed-loop insulin delivery system. Other applications of nanomedicine include targeted molecular imaging in vivo (e.g. tissue complications) using quantum dots (QDs) or gold nanoparticles, and single-molecule detection for the study of molecular diversity in diabetes pathology., (Copyright 2008 John Wiley & Sons, Ltd.)

Glycomics is a developing field that provides structural information on complex populations of glycans isolated from tissues, cells and organs. Strategies employing matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) are central to glycomic analysis. Current MALDI-based glycomic strategies are capable of efficiently analyzing glycoprotein and glycosphingolipid glycomes but little attention has been paid to devising glycomic methodologies suited to the analysis of glycosaminoglycan (GAG) polysaccharides which pose special problems for MALDI analysis because of their high level of sulfation and large size. In this paper, we describe MALDI strategies that have been optimized for the analysis of highly sulfated GAG-derived oligosaccharides. A crystalline matrix norharmane, as well as an ionic liquid 1-methylimidazolium alpha-cyano-4-hydroxycinnamate (ImCHCA), have been used for the analysis of heparin di-, tetra-, hexa- and decasaccharides carrying from 2 to 13 sulfate groups. Information about the maximum number of sulfate groups is obtained using the ionic liquid whereas MALDI-TOF/TOF MS/MS experiments using norharmane allowed the determination of the nature of the glycosidic backbone, and more precise information about the presence and the position in the sequence of N-acetylated residues.

This paper describes a new and simple microarray platform for presenting multiple nonderivatized oligosaccharides to protein targets, with utility for mapping carbohydrate-protein recognition events. The approach is based on the creation of a hydrazide-derivatized, self-assembled monolayer on a gold surface in a single or two-step procedure, for efficient and selectively oriented anchoring of oligosaccharide probes via their reducing ends, with detection using fluorescence detection of bound proteins. The biggest hurdles in employing gold-based substrate for fluorescence-based microarray detection include fluorescence quenching and nonspecific surface adsorption of proteins. We found that the quenching effect could be minimized by introducing a omega-thiolated fatty acid (C16) self-assembled monolayer between the gold surface and hydrazide groups, followed by detection involving three successive binding protein layers covering the gold surface. In addition, an effective blocking scheme involving poly(ethylene glycol) aldehyde and bovine serum albumin was employed to reduce nonspecific protein adsorption to the chip surface. As proof of principle, we demonstrate here that sulfated oligosaccharide probes from heparin can be effectively and covalently attached without prior derivatization onto the hydrazide-modified, self-assembled monolayer on gold-coated slide surfaces in a microarray format. This platform is used to assess binding of specific heparin-binding protein targets at very high sensitivity, and we also demonstrate that the approach can be extended to nonsulfated sugars. Direct attachment of nonderivatized sugar probes on the chip is advantageous since it avoids the need for laborious prederivatization and cleanup steps. This versatile fluorescence microarray platform provides a facile approach for interrogating multiple carbohydrate-protein interactions in a high-throughput manner and has potential as a common gold surface platform for other diverse interrogations by MALDI-MS, surface plasmon resonance, and quartz crystal microbalances.

Addition of polyethylene glycol to aqueous assembly solutions of oppositely charged polypeptides enables high-capacity "loading" of functional protein in biocompatible microcapsules by template-supported layer-by-layer nanoassembly.

A simple and straightforward approach to encapsulating an enzyme and preserving its function in polypeptide-based artificial cells is demonstrated. A model enzyme, glucose oxidase (GOx), was encapsulated by repeated stepwise adsorption of poly(L-lysine) and poly(L-glutamic acid) onto GOx-coated CaCO3 templates. These polypeptides are known from previous research to exhibit nanometer-scale organization in multilayer films. Templates were dissolved by ethylenediaminetetraacetic acid (EDTA) at neutral pH. Addition of polyethylene glycol (PEG) to the polypeptide assembly solutions greatly increased enzyme retention on the templates, resulting in high-capacity, high-activity loading of the enzyme into artificial cells. Assay of enzyme activity showed that over 80 mg-mL(-1) GOx was retained in artificial cells after polypeptide multilayer film formation and template dissolution in the presence of PEG, but only one-fifth as much was retained in the absence of PEG. Encapsulation is a means of improving the availability of therapeutic macromolecules in biomedicine. This work therefore represents a means of developing polypeptide-based artificial cells for use as therapeutic biomacromolecule delivery vehicles.

Electron transfer between metal electrodes and ferro/ferricyanide is completely suppressed at low ionic concentration. We describe here a new phenomenon related to this reaction: an immobilisation of thiolated single-stranded DNA on gold electrodes retains this activity at low ionic strength up to the level corresponding to the high ionic strength. In contrast, a hybridisation of the complementary DNA with the thiolated single-stranded DNA followed by a binding onto the electrodes, attenuated the electrocatalytic effect. These effects can be used for discrimination between single-stranded DNA and double-stranded DNA and for semi-quantitative measurement of complementary DNA in a sample.

Multilayer thin films formed by sequential deposition of oppositely charged polypeptides on a charged surface are known from previous studies to comprise a mixture of types of secondary structure. Here, study of the perturbation of polypeptide film structure by deposition of poly(allylamine hydrochloride) (PAH) and poly(styrenesulfonate) (PSS) on the film surface has revealed differences in behavior attributable to physical properties of the peptides. The methods of analysis were circular dichroism spectroscopy (CD), ultraviolet spectroscopy (UVS), and quartz crystal microbalance (QCM). Films made of poly(L-lysine) (PLL) and poly(L-glutamic acid) (PLGA) with an average charge per monomer of about 1 were substantially more susceptible to perturbation of structure than films made of designed polypeptides with an average charge per monomer of about 0.5, despite preparation under identical conditions. PLL-PLGA films showed loss or gain of material and change in secondary structure content on perturbation, whether made of high molecular mass (ca. 90 kDa) or low molecular mass (ca. 14 kDa) polymers. By contrast, films made of very low molecular mass (ca. 3.5 kDa) designed polypeptides showed little change in secondary structure content. The data suggest that the penetrability of PSS or PAH into a film and therefore film density can depend substantially on the polypeptides of which it is made and the character of intermolecular interactions.

A strategy for the high-sensitivity, high-selectivity, and multiplexed detection of oligonucleotide hybridizations has been developed with an encoded Ni microparticle random array that was manufactured by a "top-down" approach using micromachining and microfabrication techniques.

This chapter describes the construction of addressable two-dimensional (2D) microarrays via the random fluidic self-assembly of metallic particles and the use of these arrays as platforms for constructing protein chips for bioassays. These arrays will be useful as platforms for constructing protein chips for bioassays in a broad range of applications. The basic units in the assembly are microfabricated particles, which carry a straightforward visible code, and the corresponding array template patterned on a glass substrate. On one face, the particles consist of a hydrophobic and magnetic Ni-polytetrafluoroethylene (Ni-PTFE) composite layer; the other face has a gold layer that was modified for biomolecular attachment. We use photoresist patterning to create an array template with spatially discrete microwells into which an Ni-PTFE hydrophobic composite layer and a hydrophobic photoadhesive coating are electrodeposited. After biomaterial attachment and binding processes in bulk, the particles are randomly self-assembled onto the lubricated bonding sites on the chip substrate. This self-assembly process is driven by a combination of magnetic, hydrophobic, and capillary interactions. The encoding symbol carried by each particle is used to identify the target attached to the particle surface. This model system demonstrates the utility of the protein chip array for conducting simultaneous multianalyte immunoassays of human immunoglobulins (IgA, IgG, and IgM).

Micromachining techniques, which originated in the microelectronics industry, have been employed to manufacture microparticles bearing an engraved dot-type signature for biomolecular encoding. These metallic microstructures are photolithographically defined and manufactured in a highly reproducible manner. In addition, the code introduced on the particle face is a straightforward visible feature that is easily recognizable with the use of optical microscopy. The number of distinct codes theoretically could be many thousands, depending on the coding element numbers. Such microparticles are, thus, with appropriate surface organic functionalizations, ideal for encoding biomolecular libraries and serving as a platform for developing high-throughput multiplexed bioassay schemes based on suspension array technology. As proof of this statement, we demonstrated that encoded microparticles tagged with antibodies to human immunoglobulin classes are capable, using imaging detection as the interrogating approach, of high sensitivity and high specificity, as well as multiplexed detection of the respective antigens in a microliter-sample volume.

This paper describes the random fluidic self-assembly of metallic particles into addressable two-dimensional microarrays and the use of these arrays as a platform for constructing a biochip useful for bioassays. The basic units in the assembly were the microfabricated particles carrying a straightforward visible code and the corresponding array template patterned on a glass substrate. The particles consisted of a hydrophobic and magnetic Ni-polytetrafluoroethylene (PTFE) composite layer on one face, and on the other face a gold layer that was modified for biomolecular attachment. An array template was photoresist-patterned with spatially discrete microwells in which an electrodeposited Ni-PTFE hydrophobic composite layer and a hydrophobic photo-adhesive coating were deposited. The particles, after biomaterial attachment and binding processes in bulk, were self-assembled randomly onto the lubricated bonding sites on the chip substrate, driven by a combination of magnetic, hydrophobic, and capillary interactions. The encoding symbol carried by the particles was used as the signature for the identification of each target/assay attached to the particle surface. We demonstrate here the utility of microfabricated-encoded particle arrays for conducting multianalyte immunoassays in a parallel fashion with the use of imaging detection.

An extraction procedure for clostebol metabolites in urine is developed including enzymatic hydrolysis of conjugated metabolites with Helix pomatia juice (SHP) and solid-phase extraction (SPE) with further cleanup of sample extracts. For the enzymatic deconjugation step, variables such as buffer pH, amount of enzyme, incubation time, and temperature are examined. For the SPE step, different wash solutions and combinations with subsequent liquid-liquid extractions are examined. Incurred bovine urine samples, obtained through oral and intramuscular administration of clostebol acetate to animals, are used to test the performance of the developed method. In addition to the optimization of the sample pretreatment procedure, an interlaboratory study for the analysis of the incurred urine samples with ELISA and GC-MS is performed and good agreements are observed.

A fully automated stand-alone flow injection immunoanalysis (FIIA) device for the determination of cephalexin in milk is developed with a main focus on the investigation of the influence of the sample matrix. The system is based on principles of flow-through immunoassays and on sequential addition of the assay components to an immunoreactor. Protein G is immobilised on the surface of the immunoreactor serving as affinity matrix for the polyclonal anti-cephalexin antibodies. A cephalexin-alkaline phosphatase conjugate is mixed with the analyte-containing sample and binds in a competitve manner to the corresponding antibodies in the immunoreactor. After substrate addition enzymatically generated p-aminophenol is detected at a carbon electrode at +150 mV vs. Ag/AgCl. One assay cycle takes 16 min including regeneration of the immunoreactor. The large excess of protein G allows for more than 150 regenerations without significant loss of signal height. Due to the high specificity of the anti-cephalexin antibodies, other beta-lactam antibiotics like penicillin, amoxicillin and cloxacillin do not interfere in the measurements, even when added at 10 mg l-1. To deactivate alkaline phosphatase present in milk, samples are heat-treated for 3 min prior to measurements. Cephalexin recoveries from two milk samples are 90 and 110%. The detection limit in milk is 1 microgram l-1 (mean relative standard deviation of 3%), less than the maximum residue level of 4 micrograms per kg milk fixed for some beta-lactam antibiotics in the European Union. The device is suitable for fast quantitative data generation from consecutively measured samples and thus adds to analytical screening methods.

A novel and expeditious approach for direct determination of phenols in water and waste waters based on solid-phase extraction coupled on-line to a flow injection analysis (FIA) manifold is described. The method employs on-line preconcentration of the phenols in an acidified sample (pH=2.0) onto a 3 cmx3 mm column packed with Amberlite XAD-4 resin. The phenols are subsequently eluted from the resin into a flowing system with an alkaline solution (pH=13) by actuating a switching valve; the eluted analytes were then quantified spectrophotometrically as the products of reaction with 4-aminoantipyrine (4-AAP) and potassium ferricyanide on passing through the flow-cell of a detector. The proposed method has a linear calibration range 0.01-1 mug ml(-1) of phenol, with a detection limit of 0.004 mug ml(-1) (S/N=3) and a sample throughput of 12 h(-1), investigated with a 4.4 ml sample volume. The relative standard deviation is 2.4% for 0.2 mug ml(-1) of the analyte. The sensitivity offered by the procedure was higher by a factor of 13 than that provided by a conventional flow injection analysis method. The analytical scheme of the proposed system is much simpler than its conventional manual counterpart due to the fact that it combines trace enrichment, sample clean-up, derivation and detection in one analytical set-up. The high speed, ease of use and automation, selectivity, and relative freedom from random contamination by sample handling make this method ideal for the phenols monitoring in water and waste waters.