Search

Purpose Our purpose was to compare the performance of prostate-specific membrane antigen (PSMA)-positron emission tomography (PET) traditional fixed threshold (FT) and newly-established Prostate Imaging Reporting and Data System (PI-RADS)-based segmented threshold (ST) for diagnosing clinically significant prostate cancer (csPCa).Methods The study retrospectively included 218 patients who underwent multiparametric magnetic resonance imaging (mpMRI) and PSMA-PET examination for suspected prostate cancer (PCa) from January 2018 to November 2021. Lesions with Gleason score (GS) ≥ 3 + 4 were diagnosed as csPCa. In PSMA-PET maximum standardized uptake value (SUVmax), the FT for all the lesions and ST for lesions with different PI-RADS score for diagnosing csPCa were determined by receiver operating characteristic (ROC) curves analysis and compared with Z test. The McNemar test was used to compare sensitivity and specificity.Results Among the 218 patients, there were 113 csPCa and 105 non-csPCa. The PSMA-PET FT was SUVmax > 5.3 (area under the curve, AUC = 0.842) and STs for PI-RADS 3/4/5 were SUVmax > 4.2/5.7/6.0 (AUCs = 0.870/0.867/0.882), respectively. The AUC of PSMA-PET ST was higher than that of PSMA-PET FT (0.872 vs. 0.842), especially for PI-RADS 3 (0.870 vs. 0.653). Multimodality diagnostic criteria combining PSMA-PET ST and PI-RADS scores of mpMRI was established and its AUC was higher than that of PSMA-PET ST (0.893 vs. 0.872), and significantly higher than that of PSMA-PET FT (0.893 vs. 0.842) with an improvement in sensitivity (93% vs. 78%, p 0.05).Conclusions For diagnosing csPCa, PI-RADS-based PSMA-PET ST achieved better performance than traditional FT, especially for PI-RADS 3 lesions.

Purpose: 68Ga-FAPI-04 PET imaging has shown clinical advantages for detecting and staging various solid tumor types, including gastrointestinal cancer. This study aims to compare the diagnostic efficacy of 68Ga-FAPI-04 PET and 18F-FDG PET for detecting anastomotic recurrence in postoperative patients with gastrointestinal cancer and to characterize the pattern of 68Ga-FAPI-04 uptake at surgical wounds post-surgery. Methods: This study involved 63 gastrointestinal cancer patients who underwent 68Ga-FAPI-04 and 18F-FDG PET/CT imaging, or 68Ga-FAPI-04 PET/CT imaging only for postoperative surveillance after curative surgical resection. The SUVmax at surgical wounds (anastomotic sites and abdominal incision sites) and its corresponding ratio compared to background were assessed. Endoscopic pathology confirmed anastomotic recurrence or it was ruled out by imaging and clinical follow-up. The sensitivity, specificity, positive and negative predictive values (PPV and NPV), and accuracy of the two PET imaging in detecting anastomotic recurrence were compared based on the analysis of paired FAPI-FDG PET imaging. Relationships between tracer uptake at surgical wounds and postoperative time were also analyzed. Results: Sensitivity, specificity, PPV, NPV, and accuracy of detecting anastomotic recurrence were 100.0%, 87.3%, 41.7%, 100.0%, and 88.3% for 68Ga-FAPI-04 PET imaging, and 60.0%, 81.8%, 23.1%, 95.7%, and 80.0% for 18F-FDG PET imaging respectively. Compared with non-recurrent patients, the recurrent patients exhibited a significantly higher anastomotic SUVmax and ratio on FAPI-PET imaging (SUVmax : 9.92±4.36 vs. 2.81±1.86, P =0.002; Ratio: 5.11±1.99 vs. 2.23±1.17, P 68Ga-FAPI-04 PET displayed a significantly higher SUVmax ratio at surgical wounds than 18F-FDG PET imaging (anastomotic sites: 2.57±1.61 vs. 1.76±0.74, P =0.001; abdominal incision sites: 2.14±1.47 vs. 1.65±1.12, P =0.029). Although 68Ga-FAPI-04 PET signal at surgical wounds showed a slight trend to decrease over time (anastomotic SUVmax : r=-0.2830, P =0.0223; incisional SUVmax : r=-0.4549, P 0.05). Conclusion: The surveillance power of 68Ga-FAPI-04 PET is superior to 18F-FDG PET in postoperative anastomotic recurrence of gastrointestinal cancer, but the positive predictive value was limited due to wound healing inference. Therefore, combined surveillance methods were suggested instead of relying on 68Ga-FAPI-04 or 18F-FDG PET only.

Background and Aims: The aims of this study were to establish a maximum standardized uptake value (SUVmax) cutoff to discriminate clinically significant prostate cancer (csPCa) from benign prostate disease (BPD) by 68Ga-labeled prostate-specific membrane antigen (68Ga-PSMA-11) positron emission tomography/computed tomography (PET/CT) in patients with suspected prostate cancer (PCa), and to perform a prospective real-world validation of this cutoff value. Methods: The study included a training cohort to identify an SUVmax cutoff value and a prospective real-world cohort to validate it. A retrospective analysis assessed 135 patients with suspected PCa in a large tertiary care hospital in China who underwent 68Ga-PSMA-11 PET/CT. All patients were suspected of having PCa based on symptoms, digital rectal examination (DRE), total prostate-specific antigen (tPSA) level, and multiparameter magnetic resonance imaging (mpMRI). The 68Ga-PSMA PET/CT results were evaluated using histopathological results from transrectal ultrasound-guided 12-core biopsy with necessary targeted biopsy as references. Patients with Gleason scores (GS) ≥7 from the biopsy results were diagnosed with csPCa, and patients with negative biopsy and follow-up results were diagnosed with BPD. Receiver operating characteristic (ROC) curve analysis was used to identify the optimal SUVmax cutoff value. The cutoff value was prospectively validated in 58 patients with suspected PCa. The diagnostic benefits of the cutoff value for clinical decision making were also evaluated. Results: According to ROC curve analysis, the most appropriate SUVmax cutoff value for discriminating csPCa from BPD was 5.30 (sensitivity, 85.85%; specificity, 86.21%; area under the curve [AUC], 0.893). The cutoff achieved a sensitivity of 83.33%, a specificity of 81.25%, a positive predictive value (PPV) of 92.11%, a negative predictive value (NPV) of 65.00%, and an accuracy of 82.76% in the prospective validation cohort. Metastases were used as an indicator to reduce false negative results in patients with SUVmax ≤ 5.30. In patients without metastases, an SUVmax value of 5.30 was also the best cutoff to diagnose localized csPCa (sensitivity, 80.43%; specificity, 86.21%; AUC, 0.852). The cutoff discriminated localized csPCa from BPD with a sensitivity of 76.19%, a specificity of 81.25%, a PPV of 84.21%, an NPV of 72.22%, and an accuracy of 78.38% in the prospective validation cohort. The cutoff, combined with metastases, achieved an accuracy of 89.12% in all patients, increasing accuracy by 8.29% and reducing equivocal results compared with manual reading. There was a strong correlation between SUVmax and PSMA expression (rs = 0.831, P < 0.001) and a moderate correlation between SUVmax and GS (rs = 0.509, P < 0.001). The PSMA expression and SUVmax values of patients with csPCa were significantly higher than those of patients with BPD (P < 0.001). Conclusion: We established and prospectively validated the best SUVmax cutoff value (5.30) for discriminating csPCa from BPD with high accuracy in patients with suspected PCa. 5.30 is an effective cutoff to discriminate csPCa patients with or without metastases. The cutoff may provide a potential tool for the precise identification of csPCa by 68Ga-PSMA PET/CT, ensuring high accuracy and reducing equivocal results.

Rare-earth orthoferrite SmFeO3 is an outstanding single-phase multiferroic material, holding great potential in novel low-power electronic devices. Nevertheless, simultaneous magnetic and ferroelectric orders as well as magnetoelectric (ME) coupling effect at room temperature (RT) in this system have not been demonstrated yet. In this study, epitaxial SmFeO3 films were successfully prepared onto tensile-strain Nb-SrTiO3 (Nb-STO) substrates by a pulsed laser deposition (PLD) method. Measurement results show that the films exhibit obvious ferromagnetic and ferroelectric orders at RT. Meanwhile, the magnetic anisotropy gradually changes from out-of-plane (OP) to in-plane (IP) direction with increasing film thickness, which is attributed to the variations of O 2p-Fe 3d hybridization intensity and Fe 3d-orbit occupancy caused by the strain-relaxed effect. Moreover, electrically driven reversible magnetic switching further proves that the SmFeO3 films exhibit the RT ME coupling effect, suggesting promising applications in new-generation electric-write magnetic-read data storage devices.

Background Osteoblastoma (OB) is an intermediate lesion, which makes the accurate preoperative diagnosis very important. 99mTc-methylene diphosphonate (99mTc-MDP) bone scan and SPECT/CT imaging were evaluated for their diagnostic value in spinal OB. Methods This study was a retrospective analysis of patients with spinal OB lesions confirmed by pathology and diagnosed with bone scan and SPECT/CT for preoperative diagnosis from January 2008 to December 2018. The uptake levels of OB on planar bone scan were divided into low, medium, and high groups by visual assessment referring to the uptake of the normal rib, spine, and bladder. X-ray, CT, MRI, bone scan, and SPECT/CT imaging of the patients were analyzed for characteristics summary. Results Twenty-five patients were diagnosed for spinal OB (17 males and 8 females with a proportion of 2.1:1), and the average age was 26.8 ± 10.8 years (range 5~59). There were 8 lesions located in the cervical, 6 in the thoracic, and 11 in the lumbar vertebrae. Twenty-four lesions involved posterior elements, especially the pedicles (14/25). Symptoms were predominantly painful with a duration of 18.3 ± 13.9 months (range 0.5~60 months). The lesion size ranged from 9 to 35 mm. All the lesions were low to high uptake in the planar bone scan, and the percentages of low to high levels were 1 (4%), 8 (32%), and 16 (64%) cases. Conclusions Spinal OB mainly involved the posterior area, and elderly patients should be considered as well. SPECT/CT combined the characteristics of bone uptake and anatomical features of bone tumors, proving its one-in-all diagnostic value for spinal OB and other osteogenic tumors.

MCC950 is a novel NLRP3 inflammasome inhibitor that possesses potent anti-inflammatory properties in acute myocardial infarction (AMI). However, the lack of noninvasive monitoring methods limits its potential clinical translation. Thus, we sought to investigate whether 18F-FDG PET imaging can monitor the therapeutic effects of MCC950 in an AMI murine model. C57BL/6 mice were used to generate an AMI model. MCC950 or sterile saline was intraperitoneally administered 1 hour after surgery and then daily for 7 consecutive days. 18F-FDG PET (inflammation) imaging was used to monitor inflammatory changes on days 3 and 5. Immunohistochemistry and Western blot were used to detect inflammatory markers and to confirm the PET imaging results. 18F-FDG PET (viability) imaging was used to quantitate the viability defect expansion on days 7 and 28. Cardiac ultrasound and survival analyses were performed to evaluate the cardiac function and survival rate. Adverse remodeling was determined by Wheat Germ Agglutinin (WGA) and Masson trichrome staining. The FDG-PET (inflammation) imaging revealed that MCC950 treatment led to lower 18F-FDG inflammatory uptakes, at the infarct region, on days 3 and 5 when compared to the MI group. The decreased M1 macrophages and neutrophils infiltration and the remission of the NLRP3/IL-1β pathway, confirmed the FDG-PET (inflammation) imaging results. The FDG-PET (viability) imaging revealed that MCC950 significantly decreased the expansion of the viability defect, demonstrating its myocardial preservation effects. The acute FDG-PET (inflammation) signal positively correlated with the late viability defect and with the reduction in the left ventricular ejection fraction (LVEF). Additionally, the alleviated adverse remodeling and the improved survival rate further support the anti-inflammatory efficiency of MCC950 in AMI. Using 18F-FDG PET imaging, we noninvasively demonstrated the therapeutic effects of MCC950 in AMI and showed that 18F-FDG PET imaging holds promising application potentials in MCC950’s clinical translation.

Thin films with perpendicular magnetic anisotropy (PMA) play an essential role in the development of technologies due to their excellent thermal stability and potential application in devices with high density, high stability, and low energy consumption. Many studies have focused on the relationship between the resistivity of heavy metals and the PMA of the neighbouring magnetic metals in magnetic multi-layered films. However, reports on the effects of heavy metals non-adjacent to the magnetic metals on the PMA are rare. Herein, we demonstrate the influence of the heavy metal Ta underlayer non-adjacent to the magnetic Co layer on the PMA and thermal stability in the Ta/Pt/Co/Pt heterostructures. A type of amorphous Ta film having an ultra-high resistivity (ρmax = 3.9 × 105 μΩ cm) was optimized by DC sputtering at a high sputtering Ar pressure, low sputtering power, and large target-to-substrate distance. The value of resistivity is three orders of magnitude higher than that of the β-Ta underlayer. We found that this special Ta underlayer can effectively improve the PMA and thermal stability of the magnetic Co layer based on the anomalous Hall and planar Hall effect measurements. The maximum magnetic anisotropic field reaches 1.1 T at a low temperature. It is very likely that the ultra-high resistivity leads to the increase in the additional electron scattering in the Ta/Pt interface, while the latter results in the enhancement of the PMA and thermal stability in the structure. These results reveal the inherent relationship between the resistivity of the heavy metal underlayer and PMA, and provide a novel approach to improve the PMA and thermal stability of heavy metal/magnetic metal multi-layered films.

A 61-year-old man was diagnosed with a malignant melanoma and underwent a resection; he presented with progressive dyspnea after treatment with interferon for 2 months. 18F-FDG PET/CT scan revealed diffuse ground-glass opacities (GGOs) in both lungs with mildly elevated 18F-FDG uptake, similar to that observed with interstitial inflammation. However, a lung biopsy confirmed that the diffuse GGOs were pulmonary metastases of melanoma and were positive for the BRAF mutation. The diffuse GGOs and the progressive dyspnea disappeared after BRAF-targeted therapy. This represents an unusual case of lung metastases from melanoma, mistakenly interpreted as lung inflammation induced by immunotherapy.

Objectives Dynamic contrast-enhanced MRI (DCE-MRI) with Extended Tofts Linear (ETL) model has been used in tissue and tumor evaluation. However, its reliability and reproducibility in pancreatic evaluation has been unclear. It is also unclear whether pancreatic DCE-MRI pharmacokinetic parameters were consistent and stable among different pancreatic regions, ages and genders. Methods Pancreatic pharmacokinetic parameters of 54 volunteers were calculated using DCE-MRI with ETL model. Firstly, Intra- and inter-observer reproducibility was evaluated using intra-class correlation coefficient (ICC) and coefficient of variation (CoV). Secondly, subgroup evaluation of pancreatic DCE-MRI pharmacokinetic parameters was performed. 54 subjects were divided into three groups in virtue of pancreatic region, three groups according to age, two groups according to gender, which pharmacokinetic parameters among and between different groups were calculated and compared. Results There was excellent agreement and low variability of intra- and inter-observer to pancreatic DCE-MRI pharmacokinetic parameters. The intra- and inter-observer ICCs of Ktrans, kep, ve, vp were 0.971, 0.952, 0.959, 0.944 and 0.947, 0.911, 0.978, 0.917, respectively. The intra- and inter-observer CoVs of Ktrans, kep, ve, vp were 9.98%, 5.99%, 6.47%, 4.76% and 10.15%, 5.22%, 6.28%, 5.40%, respectively. There were no significant differences of Ktrans, kep among different pancreatic regions, among different age groups, between male and female groups (P all > 0.10). Only, pancreatic ve of old group was higher than that of young and middle-aged groups (P = 0.042, 0.001), and vp of pancreatic head was higher than that of pancreatic body and tail (P = 0.014, 0.043). Conclusions DCE-MRI with ETL model is reliable and reproducible for quantitative assessment of pancreatic pharmacokinetic parameters. ve varies with age and vp varies with pancreatic region, which can provide guidance for the selection of normal reference in the pharmacokinetics study of pancreatic diseases.

Purpose Gene mutations are mutually exclusive in non-small cell lung cancer (NSCLC). Using EGFR and KRAS as examples, this study aims to assess the significance of mutation mutual exclusion information in the optimization of radiomics algorithms for predicting gene mutation.Methods We retrospectively analyzed 161 NSCLC patients with 18F-FDG PET/CT scans and EGFR and KRAS gene mutation data. Patients were randomly divided into training and testing cohorts. The Pyradiomics toolkit was used for radiomics feature extraction. Based on these features, radiomics score (RS) models were developed for predicting KRAS mutations using the gradient boosting decision tree (GBDT) algorithm. Furthermore, to investigate the value of adding mutation mutual exclusion information, a composite model combining PET/CT RS and EGFR mutation status was developed using logistic regression. The area under the curve (AUC), specificity, sensitivity, and accuracy were calculated for model performance evaluation in the training and test cohorts. To test the generalizability of this optimization method, models for predicting EGFR mutation were established in parallel, with or without adding KRAS gene mutation information.Results Compared with CT, the PET/CT based RS model exhibited higher AUC (KRAS: 0.792 vs 0.426; EGFR: 0.786 vs 0.644). By integrating EGFR mutation information into the PET/CT RS model, the AUC, accuracy, and specificity for predicting KRAS mutations were all elevated in the test cohort (0.928, 0.857, 0.897 vs 0.792, 0.755, 0.769). Conversely, the composite model for predicting EGFR mutations could also be optimized by adding KRAS gene mutation information (AUC, accuracy, and specificity: 0.877, 0.776, 0.700 vs 0.786, 0.694, 0.567). By adding EGFR and KRAS exclusive mutation information, respectively, the composite model corrected 55.4% and 30.7% false positive cases produced by the PET/CT RS model in the test cohort, without sacrificing sensitivity.Conclusion Integrating the mutation status of a known gene is a potential method to optimize radiomics models for predicting another gene mutation. This method may help predict unconventional gene mutations when the second biopsy is clinically difficult to carry out.

In this work, the magnetic and transport properties of La0.7Ca0.3MnO3 (LCMO) films are compared with films capped with Fe3O4. The capping layers for films with the thicknesses of 50 nm and 100 nm broadened the metal–insulator transition, though they produced rather few changes to other properties. The results were dramatically different for a 20-nm-thick LCMO layer compared to other thicker films. The metal–insulator transition temperature increased from 160 to 200 K for capped LCMO film despite the fact that the capping layer reduced the magnitude of magnetization. The temperature of maximum magnetoresistance (MR) shifted from 115 to 185 K. However, its magnitude, 1500% at 5 T, remained unchanged due to capping. This behavior was attributed to atomic inter-diffusion at the LCMO/Fe3O4 interface which resulted in the generation of Mn2+ ions. These results are of great significance and suggest a promising future for both the fundamental research and device applications involving thin films of LCMO.

Negative exchange bias is usually discovered in ferromagnetic (FM)/antiferromagnetic (AFM) heterostructures after a field-cooling (FC) process. Relatively, positive exchange bias (PEB) is a rarely observed phenomenon. So far, almost all of the models for PEB whether undergoing FC or zero-field-cooling (ZFC) treatment have been explained by an interaction of strong AFM coupling at the interface. In this work, by selecting a special material of SrFeO3-x as the AFM layer, coupled with FM-La0.7Sr0.3MnO3 (LSMO), we obtain a novel PEB effect of the bilayer after ZFC measurement, of which the shift directions are unfixable and dependent on the initial magnetization direction. Based on a transient magnetic field to control the remanence (Mr) direction of LSMO at room temperature and then cooling below the TN of SrFeO3-x without any magnetic field disturbance, the shift direction can be locked only toward the transient magnetic field. Combined with experimental results and first-principles calculations, we propose that the above phenomena are explained as the field-induced AFM phase of SrFeO3-x transforming into the FM phase at an FM coupling bilayer interface. Thus, our finding may provide a new approach to realize and tune the zero-field-cooling PEB with FM coupling heterostructures.

Perpendicular magnetic anisotropy (PMA) plays a critical role in spintronics, giving rise to improvements in fundamental research and industrial production. Generally, PMA originates mainly from the spin–orbit interaction with perpendicular orbital moment. However, electron orbitals are difficult to tune once they emerge. Here, we propose a simple and effective method for preparing (001)-oriented ultrathin La0.67Sr0.33MnO3 (LSMO) films with PMA, which is induced by compressive strain and surface symmetry breaking. Moreover, PMA was effectively strengthened by means of annealing under applied magnetic field. X-ray linear dichroism spectra reveal that PMA should be attributed to the preferential occupancy of the 3z2 − r2 orbital in LSMO films. The results presented here show that PMA can be manipulated by orbital reconstruction in perovskite manganite films under compressive strain through a simple and effective strategy. These findings illustrate a new method for designing and controlling magnetic anisotropy and might advance fundamental applications of orbital physics and spintronics.

In this work, epitaxial growth of LaMnO3 thin films on different substrates using pulsed laser deposition under tensile and compressive strain was studied. The intrinsic exchange bias effect was observed in the single A-type antiferromagnetic LaMnO3 films no matter whether the tensile or compressive strain was supplied by the substrates. Due to the lattice mismatch between the film and different substrates, the intense strain can induce MnO6 octahedral rotation in the bottom region of the film neighboring the substrate, which leads to the distortion of MnO6 octahedron and the net magnetic behavior. However, the upper part maintains the original A-type antiferromagnetic order due to strain relaxation. The exchange bias effect in single films is attributed to the coupling between the bottom canted magnetic part and the upper antiferromagnetic region. The observation of exchange bias in single films on different substrates enables the emergence of a new class of biasing components in spintronics, which are based on strain-engineering.

The topological Hall effect (THE) as a powerful probe for the experimental observation of topological spin textures, such as magnetic skyrmions, has been observed in a wide variety of distinct material systems. However, limited experimental observations have been reported for antiferromagnetic (AFM) materials. Here, the THE signals in the AFM state were observed in compensated ferrimagnetic thin films interfaced with heavy metals at the magnetization compensation temperature (TM). Ferrimagnetic CoTb thin films grown on Pt thin films were used in the experiments. The CoTb films exhibited a magnetization compensation point at which the moments of Co and Tb sublattices canceled each other, giving rise to the AFM state. The temperature (T)-dependent Hall measurements showed anomalous Hall effect (AHE) and THE responses at T ≠ TM but pure THE responses at T = TM. Control measurements and analyses suggest that the THE responses are associated with interfacial Dzyaloshinskii-Moriya interaction (DMI) rather than the overlapping of different AHE signals in the structure. This work presents the first-ever observation of interfacial DMI-induced THE in AFM metal trilayered systems and demonstrates a new approach for electrical reading of chiral spin textures in AFM thin film-based heterostructures.

PurposePLND (pelvic lymph node dissection)-validated nomograms are widely accepted clinical tools to determine the necessity of PLND by predicting the metastasis of lymph nodes (LNMs) in pelvic region. However, these nomograms are in lacking of a threshold to predict the metastasis of extrareolar lymph nodes beyond pelvic region, which is not suitable for PLND. The aim of this study is to evaluate a threshold can be set for current clinical PLND-validated nomograms to predict extrareolar LN metastases beyond pelvic region in high-risk prostate cancer patients, by using 68Ga-PSMA PET/CT as a reference to determine LN metastases (LNMs).Experimental DesignWe performed a retrospective analysis of 57 high-risk treatment-naïve PC patients in a large tertiary care hospital in China who underwent 68Ga-PSMA-617 PET/CT imaging. LNMs was detected by 68Ga-PSMA-617 PET/CT and further determined by imaging follow-up after anti-androgen therapy. The pattern of LN metastatic spread of PC patients were evaluated and analyzed. The impact of 68Ga-PSMA PET/CT on clinical decisions based on three clinical PLND-validated nomograms (Briganti, Memorial Sloan Kettering Cancer Center, Winter) were evaluated by a multidisciplinary prostate cancer therapy team. The diagnostic performance and the threshold of these nomograms in predicting extrareolar LNMs metastasis were evaluated via receiver operating characteristic (ROC) curve analysis.ResultsLNMs were observed in 49.1% of the patients by 68Ga-PSMA PET/CT, among which 65.5% of LNMs were pelvic-regional and 34.5% of LNMs were observed in extrareolar sites (52.1% of these were located above the diaphragm). The Briganti, MSKCC and Winter nomograms showed that 70.2%-71.9% of the patients in this study need to receive ePLND according to the EAU and NCCN guidelines. The LN staging information obtained from 68Ga-PSMA PET/CT would have led to changes of planned management in 70.2% of these patients, including therapy modality changes in 21.1% of the patients, which were mainly due to newly detected non-regional LNMs. The thresholds of nomograms to predict non-regional LNMs were between 64% and 75%. The PC patients with a score >64% in Briganti nomogram, a score >75% in MSKCC nomogram and a score >67% in Winter nomogram were more likely to have non-regional LNMs. The AUCs (Area under curves) of the clinical nomograms (Briganti, MSKCC and Winter) in predicting non-regional LNMs were 0.816, 0.830 and 0.793, respectively.ConclusionsBy using 68Ga-PSMA PET/CT as reference of LNM, the PLND-validated clinical nomograms can not only predict regional LNMs, but also predict non-regional LNMs. The additional information from 68Ga-PSMA PET/CT may provide added benefit to nomograms-based clinical decision-making in more than two-thirds of patients for reducing unnecessary PLND. We focused on that a threshold can be set for current clinical PLND-validated nomograms to predict extrareolar LN metastases with an AUC accuracy of about 80% after optimizing the simple nomograms which may help to improve the efficiency for PC therapy significantly in clinical practice.

${\mathrm{Y}}_{3}{\mathrm{Fe}}_{5}{\mathrm{O}}_{12}$ ($\mathrm{YIG}$) thin films having a thickness of several nanometers and showing both strong perpendicular magnetic anisotropy (PMA) and low magnetic damping are reported. The films are deposited by magnetron sputtering at room temperature first and then annealed in ${\mathrm{O}}_{2}$ at high temperature. The substrates are ${\mathrm{Gd}}_{3}({\mathrm{Sc}}_{2}{\mathrm{Ga}}_{3}){\mathrm{O}}_{12}$, which share the same crystalline structure as $\mathrm{YIG}$, but have a lattice constant slightly larger than that of $\mathrm{YIG}$; the lattice mismatching gives rise to an out-of-plane compressive strain and PMA in the $\mathrm{YIG}$ films. The PMA is confirmed by vibrating sample magnetometer, magneto-optical Kerr effect, anomalous Hall effect, and angle-dependent ferromagnetic resonance (FMR) measurements. The damping of the films is analyzed through frequency-dependent FMR measurements. As an example, an 8-nm-thick $\mathrm{YIG}$ film shows an effective PMA field of about 2800 Oe, a nearly square hysteresis loop, and a damping constant of only $4.2\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}4}$. As an illustration of possible applications of such films in spintronic devices, current-induced switching of the magnetization of the PMA $\mathrm{YIG}$ films is demonstrated by the use of $\mathrm{YIG}$/$\mathrm{Pt}$ bilayered Hall bar devices.

Background Osteoblastoma (OB) is an intermediate lesion, which makes the accurate preoperative diagnosis very important. 99mTc-methylene diphosphonate (99mTc-MDP) bone scan and SPECT/CT imaging were evaluated for their diagnostic value in spinal OB. Methods This study was a retrospective analysis of patients with spinal OB lesions confirmed by pathology and diagnosed with bone scan and SPECT/CT for preoperative diagnosis from January 2008 to December 2018. The uptake levels of OB on planar bone scan were divided into low, medium, and high groups by visual assessment referring to the uptake of the normal rib, spine, and bladder. X-ray, CT, MRI, bone scan, and SPECT/CT imaging of the patients were analyzed for characteristics summary. Results Twenty-five patients were diagnosed for spinal OB (17 males and 8 females with a proportion of 2.1:1), and the average age was 26.8 ± 10.8 years (range 5~59). There were 8 lesions located in the cervical, 6 in the thoracic, and 11 in the lumbar vertebrae. Twenty-four lesions involved posterior elements, especially the pedicles (14/25). Symptoms were predominantly painful with a duration of 18.3 ± 13.9 months (range 0.5~60 months). The lesion size ranged from 9 to 35 mm. All the lesions were low to high uptake in the planar bone scan, and the percentages of low to high levels were 1 (4%), 8 (32%), and 16 (64%) cases. Conclusions Spinal OB mainly involved the posterior area, and elderly patients should be considered as well. SPECT/CT combined the characteristics of bone uptake and anatomical features of bone tumors, proving its one-in-all diagnostic value for spinal OB and other osteogenic tumors.

To assess the performance of PET vascular activity score (PETVAS) in comparison with SUVmax, inflammatory biomarkers and ITAS-2010 score in a cohort of TAK patients. Sixty-four PET/CT scans acquired from 54 TAK patients were analyzed. The inflammatory activity was qualitatively determined by physician’s global assessment and quantitatively determined by ITAS-2010 score. SUVmax and PETVAS were acquired by consensus review. Levels of the inflammatory biomarkers C-reactive protein (CRP), erythrocyte sedimentation rate (ESR), and pentraxin-3 (PTX-3) were measured. Performance of the qualitative diagnoses and the quantitative correlation were, respectively, compared by receiver operating characteristic (ROC) curve and Spearman correlation coefficient. The biomarkers (CRP, ESR, PTX-3), PET uptake values (SUVmax, PETVAS), and ITAS-2010 scores were all significantly higher in active patients than in non-active ones. The area under the ROC curve and Youden Index of PETVAS and PTX-3 were higher than those of SUVmax, CRP, ESR, and ITAS-2010. PETVAS and PTX-3 resulted in a higher Spearman correlation coefficient with ITAS-2010 than other criteria, either among all patients or within the active group. Alteration trends of PETVAS and PTX-3 during follow-up showed a tighter correlation with clinical progression/remission assessment than other criteria. In TAK evaluation, PETVAS is superior for qualitative and quantitative assessment, compared with the regional SUVmax. Compared to CRP and ESR, inflammatory biomarker PTX-3 shows better qualitative performance and a higher correlation with PETVAS and ITAS-2010. These findings indicate that the use of PETVAS and PTX-3, instead of SUVmax and CRP/ESR, has potential advantages in the clinical evaluation of TAK.

In the pursuit of high-temperature superconductivity like that in cuprates, artificial heterostructures or interfaces have attracted tremendous interest. It has been a long-sought goal to find similar unconventional superconductivity in nickelates. However, as far as we know, this has not yet been experimentally realized. To approach this objective, we synthesized a prototypical superlattice that consists of ultrathin LaNiO3 and La0.7Sr0.3MnO3 layers. Both zero resistance and the Meissner effect are observed using resistive and magnetic measurements of the superlattice. These are experimental indicators for superconductivity in new superconductors. X-ray linear dichroism causes the NiO2 planes to develop electron-occupied x2-y2 orbital order similar to that of cuprate-based superconductors. Our findings demonstrate that artificial interface engineering is suitable for investigating novel physical phenomena, such as superconductivity.

Recent theoretical studies indicated that the Curie temperature of perovskite manganite thin films can be increased by more than an order of magnitude by applying appropriate interfacial strain to control orbital ordering. In this work, we demonstrate that the regular intercalation of BaTiO3 layers between La0.67Sr0.33MnO3 layers effectively enhances ferromagnetic order and increases the Curie temperature of La0.67Sr0.33MnO3/BaTiO3 superlattices. The preferential orbital occupancy of eg(x 2 –y 2 ) in La0.67Sr0.33MnO3 layers induced by the tensile strain of BaTiO3 layers is identified by X-ray linear dichroism measurements. Our results reveal that controlling orbital ordering can effectively improve the Curie temperature of La0.67Sr0.33MnO3 films and that in-plane orbital occupancy is beneficial to the double exchange ferromagnetic coupling of thin-film samples. These findings create new opportunities for the design and control of magnetism in artificial structures and pave the way to a variety of novel magnetoelectronic applications that operate far above room temperature.

Nanoscale manipulation of the transport and magnetic properties of a material offers a distinguished possibility for the development of novel multifunctional devices with ultra-small dimensions, high densities and low power consumption. This is highly desirable for promising applications in nonvolatile data storage. Here, a novel device with multilayered NiOx/Pt (x < 1) nanowire arrays as the switching matrix was constructed by a simple electrodeposition method combining a partial oxidization process. The device exhibits bipolar resistive switching behavior with free-forming, low switching voltage, and stable endurance properties. More importantly, its magnetoresistance and magnetic properties including saturated magnetization and coercivity can be simultaneously tuned during the resistive switching process. Both the Ni-rich region constructed through electric field-induced oxygen ion migration and the pre-existence of Ni nanoparticles in NiOx segments are responsible for the resistive switching and the corresponding modulation of the magnetoresistance and magnetic properties. This work provides a simple yet effective approach for the modulation of resistance and magnetization through electrical and magnetic control, which can provide a new way of designing a multifunctional magnetoelectric device.

Paramagnetic LaNiO3 (LNO)-based heterostructures have been attracting the attention of researches, especially since the interesting exchange bias (EB) effect has been observed in (111)-oriented LaMnO3 (LMO)/LNO superlattices (SLs). However, this effect is not expected to occur in the (001) direction SLs. In this paper, we report the observation of an unexpected EB effect in (001)-oriented (LMO)3/(LNO)t SLs. The orbits of interfacial Mn/Ni ions preferentially occupy the strain-stabilized x2 – y2 in ultrathin LNO layers [t ≤ 4 unit cells (u.c.)]. Conversely, as the LNO layer becomes thicker (t ≥ 6 u.c.), the EB effect is absent, and the orbits are reconstructed to form the 3z2 – r2 preferential occupancy. The absence of the EB in thicker LNO-based SLs is attributed to the interfacial charge transfer suppressed by orbital reconstruction as a consequence of the increasing LNO thickness. In the thinner LNO-based SLs, the larger charge transfer results in stronger localized magnetic moments for the cause of the...

We study the magnetic properties of an epitaxial growth bilayer composed of ferromagnetic La0.7Sr0.3MnO3 (LSMO) and paramagnetic LaNiO3 (LNO) on SrTiO3 (STO) substrates. We find that the stack order of the bilayer heterostructure plays a key role in the interfacial coupling strength, and the coupling at the LSMO(top)/LNO(bottom) interface is much stronger than that at the LNO(top)/LSMO(bottom). Moreover, a strong spin glass state has been observed at the LSMO/LNO interface, which is further confirmed by two facts: first, that the dependence of the irreversible temperature on the cooling magnetic field follows the Almeida-Thouless line and, second, that the relaxation of the thermal remnant magnetization can be fitted by a stretched exponential function. Interestingly, we also find an exchange bias effect at the LSMO/LNO bilayer below the spin glass freezing temperature, indicating that the exchange bias is strongly correlated with the spin glass state at its interface.

A SiO 2 -Co film with a Pt bottom electrode and an Au top electrode was deposited by magnetron sputtering at room temperature. The sample exhibits bipolar resistive switching properties. Both oxygen vacancies and Co nanoparticles in the SiO 2 -Co film contribute to resistive switching properties and the formation of conducting filaments. The sample, at high and low resistance states, exhibits magnetoresistance at 300 K and 10 K, respectively; this may be due to spin-dependent tunneling between Co particles through the SiO 2 barriers. Thus, the combination of resistive switching and magnetoresistance in a simple Pt/SiO 2 -Co/Au structure leads to the formation of multiple resistance states, which is promising for future applications of multiple-state non-volatile storage.

Mg doped ZnO films with hexagonal wurtzite structure were deposited on c-cut sapphire Al2O3 substrates by pulsed laser deposition. Both room temperature ferromagnetism and band gap of the films simultaneously tuned by the concentration of oxygen vacancies were performed. Our results further reveal that the singly occupied oxygen vacancies should be responsible for the room temperature ferromagnetism and band gap narrowing. Singly occupied oxygen vacancies having the localized magnetic moments form bound magnetic polarons, which results in a long-range ferromagnetic ordering due to Mg doping. Moreover, band gap narrowing of the films is probably due to the formation of impurity band in the vicinity of valence band, originating from singly occupied oxygen vacancies. These results may build a bridge to understand the relationship between the magnetic and optical properties in oxide semiconductor, and are promising to integrate multiple functions in one system.

Artificial heterostructures based on LaNiO3 (LNO) have been widely investigated with the aim to realize the insulating antiferromagnetic state of LNO. In this work, we grew [(La0.7Sr0.3MnO3)5-(LaNiO3)n]12 superlattices on (001)-oriented SrTiO3 substrates by pulsed laser deposition and observed an unexpected exchange bias effect in field-cooled hysteresis loops. Through X-ray absorption spectroscopy and magnetic circular dichroism experiments, we found that the charge transfer at the interfacial Mn and Ni ions can induce a localized magnetic moment. A remarkable increase of exchange bias field and a transition from metal to insulator were simultaneously observed upon decreasing the thickness of the LNO layer, indicating the antiferromagnetic insulator state in 2 unit cells LNO ultrathin layers. The robust exchange bias of 745 Oe in the superlattice is caused by an interfacial localized magnetic moment and an antiferromagnetic state in the ultrathin LNO layer, pinning the ferromagnetic La0.7Sr0.3MnO3 layers...

Negative exchange bias is usually discovered in ferromagnetic (FM)/antiferromagnetic (AFM) heterostructures after a field-cooling (FC) process. Relatively, positive exchange bias (PEB) is a rarely observed phenomenon. So far, almost all of the models for PEB whether undergoing FC or zero-field-cooling (ZFC) treatment have been explained by an interaction of strong AFM coupling at the interface. In this work, by selecting a special material of SrFeO

We demonstrate the synthesis of Fe 1−x Cr x Te 2 (0≤x≤0.6) nanoparticles by high-temperature organic-solution-phase method. The microstructure and magnetic properties were investigated by X-ray diffraction, transmission electron microscope and vibrating sample magnetometer. Cr doping can effectively improve the magnetic properties and morphology of FeTe 2 . Compared with the undoped FeTe 2 , Fe 1−x Cr x Te 2 spherical nanoparticles exhibit fine grain size of about 5 nm and uniform distribution. An ultrahigh room-temperature saturation magnetization of 7.34 emu/g can be obtained for Fe 0.85 Cr 0.15 Te 2 . It is 20 times higher than that of pure FeTe 2 . The lattice expansion caused by Cr doping is favorable for the enhancement of Fe–Fe and Fe–Cr ferromagnetic interaction in Fe 1−x Cr x Te 2 . Cr doping may be an effective approach to improve the magnetic properties of the other transition-metal chalcogenides.

Co/ZnO:Al granular films were made on glass substrates by sequential magnetron sputter deposition of ultrathin Co layer and ZnO:Al layer at room temperature. The as-deposited films consist of superparamagnetic Co particles dispersed in ZnO:Al (~2% Al) semiconductor matrix. Distinguished magnetoresistance effect at room temperature was obtained in the as-deposited films, which obviously reduced after annealing due to the growth of Co particles. The size of important magnetic particles was analyzed by Langevin function for hysteresis loops and magnetoresistance curves at room temperature. It was found that small magnetic particle contribute to magnetoresistance behavior and large particles dominate the room temperature magnetism in Co/ZnO:Al granular films.

Ionic liquid gating has emerged as an attractive means of manipulating the magnetic properties of materials. Here, we report ionic liquid gating modulating the ferromagnetism of a Co film. A weak and strong saturation magnetization can be reversibly obtained by applying a negative voltage and a positive one, respectively. The modulation may be related with the oxidization and reduction of Co. Negative (or positive) gating voltages drive the oxygen ions to inject into (or extract from) Co layer of the sample, which oxidizes (or reduces) Co. These gating processes are reversible. Moreover, the magnetism of the gated states is considerably stable. It is a significant step towards designing low-power electric-controlling magnetic devices in future.