Search

Background: To assess the therapeutic effects of mesenchymal stem cell (MSC)-derived exosome therapy on periodontal regeneration and identify treatment factors associated with enhanced periodontal regeneration in recent preclinical studies. Methods: Searches were conducted in PubMed, Cochrane Library, EMBASE, and Web of Science databases until October 10, 2024. A risk of bias (ROB) assessment was performed using the SYRCLE tool. Osteogenic-related parameters were used as the primary outcome measures. Results: In total, 1360 articles were identified, of which 17 preclinical studies were based on MSC-derived exosome therapy, and they demonstrated a beneficial effect on BV/TV (SMD = 13.99; 95% Cl = 10.50, 17.48; p < 0.00001), CEJ-ABC (SMD = -0.22; 95% Cl = -0.31, -0.13; p < 0.00001), BMD (SMD = 0.29; 95% Cl = 0.14, 0.45; p = 0.0002), and Tp.Sp (SMD = -0.08; 95% Cl= -0.15, -0.02; p = 0.02) compared with the control group. However, no significant differences were observed in Tp.Th (SMD = 0.03; 95% CI = 0.00, 0.07; p = 0.09) between the exosome-treated group and control group. Additionally, subgroup analysis indicated that preconditioned exosomes (p = 0.03) significantly improved BV/TV. In contrast, there were no significant differences in the enhancement of BV/TV with respect to the application method (p = 0.29), application frequency (p = 0.10), treatment duration (p = 0.15), or source of MSCs (p = 0.31). Conclusions: MSC-derived exosomes show great promise for enhancing the quality of periodontal regeneration. However, more standardized and robust trials are needed to reduce heterogeneity and bias across studies and to confirm the therapeutic parameters associated with the enhancement of periodontal regeneration by MSC-derived exosomes. Registration: CRD42024546236. [ABSTRACT FROM AUTHOR]

A high-strength Al-Mg-Si alloy was prepared using mechanical alloying (MA) combined with press-forming (PF) technology, achieving a strength of up to 715 MPa and a hardness of 173 HB. The microstructures were comparatively analyzed with conventional cast Al-Mg-Si alloys using XRD, TKD, and TEM. The XRD results showed that the full width at half maximum (FWHM) of the alloy prepared by MA+PF was significantly broadened and accompanied by a shift in the diffraction peak. TKD revealed that the grain size of the MA+PF processed alloy was significantly reduced to approximately 260 nm, indicating substantial refinement compared to the cast alloy. Additionally, using TEM, it was found that the newly developed MA+PF alloy exhibited a distinct morphology of Mg2Si precipitation phases and a high density of stacking faults (SFs), characteristics that differed from those in the cast alloy. The significant enhancement in strength can be attributed to the synergistic strengthening effects of grain refinement, second-phase precipitation, and stacking fault strengthening, as synthesized and analyzed. [ABSTRACT FROM AUTHOR]

Objective: To identify the association between cardiopulmonary exercise testing (CPET) and outcomes of radical cystectomy (RC), as RC is historically associated with high rates of short‐ and long‐term morbidity and mortality. Methods: This quantitative systematic review and meta‐analysis was conducted in accordance with the Preferred Reporting Items for Systematic Review and Meta‐Analysis guidelines. An electronic literature search was conducted to identify all relevant studies evaluating the relationship between CPET parameters and RC outcomes. The primary outcome was short‐term mortality. Secondary outcomes included hospital length of stay (LOS) and rate of serious adverse events as defined by the Clavien–Dindo classification. Results: The search identified six studies for inclusion. A total of 546 patients underwent CPET prior to RC. There were significantly more deaths following RC observed in patients with poorer cardiopulmonary function (risk ratio RR 5.80, 95% confidence interval 4.96–6.78). There was no significant association between CPET parameters and adverse events or hospital LOS. Conclusions: The present systematic review and meta‐analysis identified a greater risk of 90‐day mortality in patients with poorer cardiorespiratory function, as measured by CPET. However, there remains a paucity of robust clinical data and further high‐quality studies are required to verify these results. [ABSTRACT FROM AUTHOR]

Temperature detection is particularly important in the medical and scientific fields. Although there are various temperature detection methods, most of them focus on broad temperature detection, and basic research in specific fields, especially the detection of subtle temperature changes (32–34 °C) during wound infection, is still insufficient. For this purpose, a novel colorimetric temperature sensing probe is designed in this paper, which can quickly and intuitively respond to small temperature changes within a specific range through color changes. In this paper, hyperbranched polyethyleneimine (HPEI) was modified by isobutyrylation to prepare hyperbranched temperature-sensitive polymer (HPEI-IBAm). And it was combined with gold nanoparticles (AuNPs) prepared by a sodium citrate reduction method to construct an HPEI-IBAm-AuNP colorimetric probe. The probe exhibits excellent stability, even at salt concentrations of up to 12 g/L, thanks to the abundant amino functional groups and the large steric hindrance effect unique to HPEI-IBAm. In particular, the temperature detection range of the probe is precisely locked within 32–34 °C, enabling it to respond quickly and accurately to small temperature changes of only 2 °C. This feature is perfectly suited to the practical needs of temperature detection in infected wounds. The linear fitting coefficient of the temperature response is as high as 0.9929, ensuring the accuracy of the test results. The detection performance of the probe remained highly consistent over 10 cycles, fully proving its excellent reusability and durability. In addition, a flexible colorimetric sensor was prepared by combining the probe with polydimethylsiloxane (PDMS) film. This sensor is capable of rapidly detecting human skin temperature in real time, achieving an accuracy of 99.07% to 100.61%. It can provide a possible solution to the challenges of delayed and difficult temperature detection caused by different body parts and uneven surfaces, among others. This demonstrates its extensive practical value and potential, and it is expected to be further applied in the monitoring of wound infections. [ABSTRACT FROM AUTHOR]

Background: Urethral stricture disease is a common and at times unsatisfying condition that can lead to complications severely impacting a patient's quality of life (QOL). Open urethroplasty remains the gold standard treatment, however it is an invasive and highly specialized procedure. Strictures between 2 and 4 cm in length have been shown to recur at a rate of 50% within 12 months, a rate that typically decreases with each subsequent treatment. The Laborie Optilume drug-coated balloon (DCB) is the first of its kind developed for adjunct treatment of urethral strictures in men. The DCB initially treats the stricture through balloon dilatation and subsequently aims to prevent recurrence via the localized application of Paclitaxel. Our study assesses the safety and efficacy of the DCB in an Australian population with strictures exceeding 2 cm, who have undergone at least two prior procedures for urethral stricture disease. Methods: Patients were prospectively recruited from November 2019 to September 2021. International prostate symptom score (IPSS), IPSS QOL, and voiding parameters were collected at baseline, and again at 1, 6, 12, and 18 months. The DCB was applied by a single consultant urologist under rigid cystoscope with shallow direct vision internal urethrotomy with a cold knife prior to application of the DCB. Results: Seventeen patients were recruited with an average of 7.7 prior urethral procedures for recurrent stricture disease. In total, 76% were stricture free at 30 months follow-up. There were improvements in almost all parameters including max flow, average flow, IPSS, and IPSS QOL scores at 12 and 24 months. There were no complications. Conclusion: The DCB is a safe and effective method at reducing the rates of recurrence for high-risk stricture disease and can delay or prevent the need for urethroplasty in what remains a very challenging cohort of patients. [ABSTRACT FROM AUTHOR]

Simple Summary: The role of fatty acid transport protein 1 (FATP1) in decapod crustaceans is still poorly understood. In this study, we cloned the FATP1 cDNA from the mud crab Scylla paramamosain, identified its sequence features and tissue distribution pattern and analyzed its roles in lipid metabolism in vivo. We found that FATP1 is involved in long-chain polyunsaturated fatty acid metabolism and deposition in crustaceans, which provides new information for understanding the function of FATP1 in invertebrates. In mammals, fatty acid transport protein 1 (FATP1) plays important roles in cellular uptake and activation of long-chain fatty acid (LCFA), especially in processes of transportation, oxidation and triacylglycerol synthesis. However, the role of FATP1 in invertebrates, especially decapod crustaceans, is still poorly understood. In this study, the cDNA of a FATP1 gene from a decapod crustacean, mud crab Scylla paramamosain, was cloned and functionally characterized. The FATP1 gene encoded a polypeptide consisting of 643 amino acids that exhibits all the typical features of the FATP family and shares high homology with the other FATP orthologs of crustaceans. The relative mRNA expression levels of FATP1 were observed to be higher in metabolically active tissues such as hepatopancreas, stomach and gill than in other crab parts. Knockdown of the FATP1 mRNA in vivo significantly reduced triacylglycerols and total lipid levels in the hepatopancreas, accompanied by an increase in the expression of genes related to fatty acid transportation, allocation and hydrolysis, including long-chain acyl-CoA synthetase 3/4 (ACSL3/4) and carnitine palmitoyl transferase 1 (CPT1), and a decrease in the expression of genes related to fatty acid synthesis such as acetyl-CoA carboxylase (ACC) and fatty acid synthase (FAS) in the hepatopancreas. Furthermore, increased dietary n-3 long-chain polyunsaturated fatty acid (LC-PUFA) levels resulted in the up-regulation of the FATP1 expression in the hepatopancreas, accompanied by an increase in LC-PUFA content, especially eicosapentaenoic acid (EPA, 20:5n-3) and docosahexaenoic acid (DHA, 22:6n-3), in both polar (PLs) and neutral lipids (NLs) in the hepatopancreas and muscles of crabs. These findings suggested that the FATP1 gene identified in S. paramamosain might play important roles in regulating long-chain fatty acid metabolism and deposition in crustaceans. [ABSTRACT FROM AUTHOR]

To perceive and understand the situation of coal mine safety throughout the life cycle of coal mine system is the basis of formulating safety system and the premise of adjusting safety strategy. Only when the safety risk of coal mine system is fully identified can the targeted safety precautions be taken. Based on the mass information of hidden danger record log and coal mine safety function index, combined with the importance of position and function itself, this paper proposes a perception evaluation model that determines hidden danger risk by industry regulations and experts' experience, adopts AHP and entropy weight method to give subjective and objective weights, and makes hierarchical evaluation of coal mine safety situation. The empirical evidence shows that the model can assist safety managers to understand the safety threat of coal mine.