Search

Traditional polyimides have highly conjugated structures, causing significant coloration under visible light. Fluorinated colorless polyimides, known for their light weight and excellent optical properties, are considered ideal for future aerospace optical lenses. However, their lifespan in low Earth orbit is severely limited by high-density atomic oxygen (AO) erosion, and the degradation behavior of fluorinated polyimides under AO exposure is not well understood. This study uses reactive molecular dynamics simulations to model two fluorinated polyimides, PMDA-TFMB and 6FDA-TFMB, with different fluorine contents, to explore their degradation mechanisms under varying AO concentrations. The results indicate that 6FDA-TFMB has slightly better resistance to erosion than PMDA-TFMB, mainly due to the enhanced chemical stability from its -CF3 groups. As AO concentration increases, widespread degradation of the polyimides occurs, with AO-induced cleavage and temperature-driven pyrolysis happening simultaneously, producing CO and OH as the main degradation products. This study uncovers the molecular-level degradation mechanisms of fluorinated polyimides, offering new insights for the design of AO erosion protection systems. [ABSTRACT FROM AUTHOR]

This research delves into the primary issue of polyimide (PI) insulation failures in high-frequency power transformers (HFPTs) by scrutinizing partial discharge development under high-frequency electrical stress. This study employs an experimental approach coupled with a plasma simulation model for a ball–sphere electrode structure. The simulation model integrates the particle transport equation, Poisson equation, and complex chemical reactions to ascertain microscopic parameters, including plasma distribution, electric field, electron density, electron temperature, surface, and space charge distribution. The effect of the voltage polarity and electrical energy on the PD process is also discussed. The contact point plays a pivotal role in triggering partial discharges and culminating in the breakdown of PI insulation. Asymmetry phenomena were found between positive and negative half-cycles by analyzing the PD data stage by stage. A significant number of PDs increased at every stage and the PD amplitude was higher during the negative cycle at the initial stage, but in later stages, the PD amplitude was found to be higher in the positive half-cycle, and scanning electron microscopy (SEM) revealed that the maximum damage occurred near the contact point junction. The simulation results show that the plasma initially accumulates the electron density near the contact point junction. Under the action of the electric field, plasma starts traveling at the PI surface outward from the contact point. Before the PD activity, all parameters have higher values in the plasma head. The microscopic parameters reveal maximum values near the contact point junction, during PD activities where significant damage takes place. These parameter distributions exhibit a decreasing trend over time as when the PD activity ends. The model's predictions are consistent with the experimental data. The paper lays the foundation for future research in polymer insulation design under high-frequency electrical stress. [ABSTRACT FROM AUTHOR]

Polyimide (PI) is widely used in aerospace applications due to its excellent properties. However, the high concentration of atomic oxygen (AO) in low-earth orbit (LEO) significantly degrades its performance. This study employs reactive molecular dynamics (MD) simulations to analyze the AO erosion resistance of fluorinated polyimide (FPI) and polyhedral oligomeric silsesquioxane (POSS) composite polyimide models. The 35 ps simulation results indicate that the PI/POSS composite exhibits the best protective performance. The protection mechanism involves the formation of an SiO2 carbonized layer that prevents the transmission of AO and heat to the polyimide matrix, resulting in a normalized mass of 84.1% after erosion. The FPI model shows the second-best protective effect, where the introduction of -CF3 groups enhances the thermal stability of the polyimide matrix, resulting in a normalized mass of 80.7% after erosion. This study explores the protective effects and mechanisms of different polyimide protection methods at the molecular level, providing new insights for the design of AO erosion protection systems. [ABSTRACT FROM AUTHOR]

Surface engineering is required to improve the poor lubrication performance of titanium alloys in many applications. In this study, an oxide coating with high-hardness was created on TC4 titanium alloy by using plasma electrolytic oxidation (PEO). The composition and structure of the PEO coatings were analyzed by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Raman spectroscopy. The tribological properties of the PEO-treated TC4 were investigated in the presence of a polyalphaolefin (PAO) base oil with addition of molybdenum dialkyldithiocarbamate (MoDTC). The results show that the PEO-treated TC4 exhibits excellent lubrication performance in the presence of MoDTC. The oxide coating on the PEO-treated TC4 sample shows a tribo-induced catalysis effect enabling the decomposition of MoDTC to forms an effective lubricating film containing MoS2, resulting in reduced friction and wear. [ABSTRACT FROM AUTHOR]