Search

Two-dimensional (2D) materials exhibit fascinating and outstanding optoelectronic properties, laying the foundation for the development of novel optoelectronic devices. However, ultra-weak light absorption of 2D materials limits the performance of the optoelectronic devices. Here, a structure of MoS2/graphene/Au integrated onto the side-polished fiber (SPF) is proposed to achieve a high-performance fiber-integrated multifunction-in-one optoelectronic device. It is found that the device can absorb the transverse magnetic (TM) mode guided in the SPF and generate photocurrents as a polarization-sensitive photodetector, while the transverse electric (TE) mode passes with low loss through the device, making the device simultaneously a polarizer. In the device, the MoS2 film and the Au finger electrode can enhance the TM absorption by 1.75 times and 24.8 times, respectively, thus allowing to achieve high performance: a high photoresponsivity of 2.2 × 105 A/W at 1550 nm; the external quantum efficiency (EQE) of 1.76 × 107%; a high photocurrent polarization ratio of 0.686 and a polarization efficiency of 3.9 dB/mm at C-band. The integration of 2D materials on SPF paves the way to enhance the light–2D material interaction and achieve high performance multifunction-in-one fiber-integrated optoelectronic devices.

Second harmonic generation (SHG) with a material of large transparency is an attractive way of generating coherent light sources at exotic wavelength range such as VUV, UV and visible light. It is of critical importance to improve nonlinear conversion efficiency in order to find practical applications in quantum light source and high resolution nonlinear microscopy, etc. Here an enhanced SHG with conversion efficiency up to 10−2% at SH wavelength of 282.7 nm under 11 GW/cm2 pump intensity via the excitation of anapole in lithium niobite (LiNbO3, or LN) nanodisk through the dominating d33 nonlinear coefficient is investigated. The anapole has advantages of strongly suppressing far-field scattering and well-confined internal field which helps to boost the nonlinear conversion. Anapoles in LN nanodisk is facilitated by high index contrast between LN and substrate with properties of near-zero-index via hyperbolic metamaterial structure design. By tailoring the multi-layers structure of hyperbolic metamaterials, the anapole excitation wavelength can be tuned at different wavelengths. It indicates that an enhanced SHG can be achieved at a wide range of pump light wavelengths via different design of the epsilon-near-zero (ENZ) hyperbolic metamaterials substrates. The proposed nanostructure in this work might hold significances for the enhanced light–matter interactions at the nanoscale such as integrated optics.

The Stern–Gerlach (SG) effect provided the first direct experimental evidence of the quantization of electron spin. Although some analog SG effects have been proposed in optical systems, finding a perfect optical analog for the SG effect remains a challenge. Here, a novel optical SG effect is demonstrated in periodically poled electro‐optical crystals. Induced by an applied electric field, the principal axes of crystal rock periodically along the propagation direction of light. When the quasi‐phase‐matching condition is satisfied, the electro‐optical coupling process within the periodically poled crystal can be accurately described by the Schrödinger–Pauli equation for spin‐1/2 particles. The output photons can be deflected toward opposite directions according to their intrinsic spin angular momentum (circular polarizations), since the transversely varying duty cycle of crystal arises an effective magnetic‐field gradient. Moreover, the output photons can be separated according to two arbitrary orthogonal polarization states, allowing us to construct high‐speed electro‐optically tunable polarization beam splitters for arbitrary orthogonal polarization states. Therefore, the optical SG effect provides not only a perfect optical analog for the quantum SG effect but also a useful optical element for optics and quantum physics. [ABSTRACT FROM AUTHOR]

Two-dimensional material tungsten diselenide (WSe2) nanosheets are coated on a microfibre knot resonator (MKR) to achieve an all-optical power modulation functionality. On account of the strong absorption property of WSe2 and the resonance enhancement properties of MKR, the transmitted optical power of signal light within the WSe2-based MKR can be effectively modulated. The sensitivities of light–control–light experiments with 405- and 660-nm lasers are as high as 0.32 and 0.12 dB/mW, respectively. The sensitivities and power tuning can be enhanced by a higher resonance Q and a larger extinction ratio of MKR. In terms of the response time, the average rise and fall times are 3.5/3.7 and 3.5/4 ms with 405- and 660-nm lasers, respectively. This proposed structure is expected to achieve potential applications in all-fibre-optic–based tunable device such as optical modulator, detector, and so on.

As a two-dimensional (2D) material, black phosphorus (BP) has attracted significant attention owing to exotic physical properties such as low-energy band gap, high carrier mobility, and strong in-plane anisotropy. The striking in-plane anisotropy is a promising candidate for novel light-matter interaction. Here, we investigate the photonic spin Hall effect (PSHE) on a monolayer of BP. Due to the in-plane anisotropic property of BP, the PSHE is accompanied with Goos-Hänchen and Imbert-Fedorov effects, resulting in an asymmetric spin splitting. The asymmetric spin splitting can be flexibly tuned by the angle between the incident plane and the armchair crystalline direction of BP and by the carrier density via a bias voltage. The centroid displacements of two opposite spin components of the reflected beam along directions parallel and perpendicular to the incident plane can be considered as four independent channels for information processing. The potential application in barcode-encryption is proposed and discussed. These findings provide a deeper insight into the spin-orbit interaction in 2D material and thereby facilitate the development of optoelectronic devices in the Terahertz region.

This paper presents an innovative carbon dioxide sensor leveraging a dense‐pattern multipass absorption cell. This novel design dramatically compacts an extensive optical path of approximately 11.4 m into a 70 mm inter‐mirror distance, effectively enhancing the system's sensitivity and reducing its size. Utilizing a 2004 nm diode laser, the sensor accurately targets a potent CO2 absorption line at 4989.9 cm−1. Experimental validation reveals remarkable linearity (R² =.999) and a detection limit of 59 ppb with 1 s integration time. The incorporation of Kalman filtering techniques further refines the sensor's performance, reducing the detection limit to 30 ppb—a substantial improvement of 49%. This advancement in sensor technology marks a significant step forward in efficient and precise CO2 monitoring. [ABSTRACT FROM AUTHOR]

The flight of a migratory bird-like flapping-wing aircraft is characterized by a low Reynolds number and unsteadiness. The selection of airfoil profiles is critical to designing an efficient flapping-wing aircraft. To choose the suitable airfoil for various wing sections, it is necessary to calculate the aerodynamic forces of the unsteady two-dimensional airfoil with a Reynolds number in the range of 105. While accurate, calculating this by solving the Navier–Stokes equations is impractical for early design stages due to its high consumption of computing resources and time. The computational demands for extending it to 3D aerodynamic calculations are even more prohibitive. In this paper, a relatively simple method is proposed. The two-dimensional unsteady panel method is utilized to derive the inviscid flow field, the unsteady integral boundary layer method is utilized to solve the boundary layer viscous flow, and the eN transition model is adopted to predict the position of the transition. These models are coupled with the semi-inverse interaction method to solve the aerodynamics of the unsteady low-Reynolds-number two-dimensional airfoil. The unsteady aerodynamics of the symmetric and cambered airfoils at different wing sections are calculated respectively by the proposed method. Mechanism analysis of the calculation results is conducted, and a symmetrical airfoil or a slightly cambered airfoil is recommended for the wing tip, a moderately cambered airfoil is suggested for the outer-wing section, and a highly cambered airfoil is suggested for the inner-wing section. [ABSTRACT FROM AUTHOR]