Search

Although tremendous achievements have been made toward inertial confinement fusion, laser plasma instabilities (LPIs) remain to be an inevitable problem for current drive schemes. To mitigate these instabilities, significant efforts have been paid to produce high-power broadband ultraviolet lasers. However, no practical scheme has been demonstrated up to now for efficient triple-frequency conversion of broadband laser. Here we propose the design of polychromatic drivers for the generation of multicolor beams mainly based upon the optical parametric amplification, which can significantly enhance the third-harmonic conversion efficiency. Each polychromatic light has four colors of monochromatic beamlets with a full spectrum width of 3\%, and the beamlet colors of any two adjacent flanges are different. The suppression effects of such polychromatic lights have been investigated via large scale particle-in-cell simulations, which indicate that more than 35\% of the incident energy can be saved from the LPIs compared with monochromatic lasers for the direct-drive scheme, or high-density filled target for the indirect-drive scheme. The proposed polychromatic drivers are based on the matured technologies, and thus may pave the way towards realization of robust and high-efficiency fusion ignition.

We report on the design and first results from experiments looking at the formation of radiative shocks on the Shenguang-II (SG-II) laser at the Shanghai Institute of Optics and Fine Mechanics in China. Laser-heating of a two-layer CH/CH-Br foil drives a $\sim$40 km/s shock inside a gas-cell filled with argon at an initial pressure of 1 bar. The use of gas-cell targets with large (several mm) lateral and axial extent allows the shock to propagate freely without any wall interactions, and permits a large field of view to image single and colliding counter-propagating shocks with time resolved, point-projection X-ray backlighting ($\sim20$ $\mu$m source size, 4.3 keV photon energy). Single shocks were imaged up to 100 ns after the onset of the laser drive allowing to probe the growth of spatial non-uniformities in the shock apex. These results are compared with experiments looking at counter-propagating shocks, showing a symmetric drive which leads to a collision and stagnation from $\sim$40 ns onward. We present a preliminary comparison with numerical simulations with the radiation hydrodynamics code ARWEN, which provides expected plasma parameters for the design of future experiments in this facility., Comment: 16 pages, 5 figures, accepted for publication in High Power Laser Science and Engineering (25 March 2021)

Relativistic electrons generated by the interaction of petawatt-class short laser pulses with solid targets can be used to generate bright X-rays via bremsstrahlung. The efficiency of laser energy transfer into these electrons depends on multiple parameters including the focused intensity and pre-plasma level. This paper reports experimental results from the interaction of a high intensity petawatt-class glass laser pulses with solid targets at a maximum intensity of $10^{19}$ W/cm$^2$. In-situ measurements of specularly reflected light are used to provide an upper bound of laser absorption and to characterize focused laser intensity, the pre-plasma level and the generation mechanism of second harmonic light. The measured spectrum of electrons and bremsstrahlung radiation provide information about the efficiency of laser energy transfer.

Stimulated Raman scattering (SRS) in plasma in the degenerate regime is studied theoretically and numerically. Different from normal SRS with the non-degenerate eigen electrostatic mode excited, the degenerate SRS is developed at plasma density $n_e>0.25n_c$ when the laser amplitude is larger than a certain threshold. To satisfy the phase-matching conditions of frequency and wavenumber, the excited electrostatic mode has a constant frequency around half of the incident light frequency $\omega_0/2$, which is no longer the non-degenerate eigenmode of electron plasma wave $\omega_{pe}$. Both the scattered light and the electrostatic wave are trapped in plasma with their group velocities being zero. Super hot electrons are produced by the degenerate electrostatic wave. Our theoretical model is validated by particle-in-cell simulations. The SRS driven in this degenerate regime is an important laser energy loss mechanism in the laser plasma interactions as long as the laser intensity is higher than $10^{15}$W/cm$^2$.

The development of parametric instabilities in a large scale inhomogeneous plasma with an incident laser beam composed of multiple-frequency components is studied theoretically and numerically. Firstly, theoretical analyses of the coupling between two laser beamlets with certain frequency difference $\delta\omega_0$ for parametric instabilities is presented. It suggests that the two beamlets will be decoupled when $\delta\omega_0$ is larger than certain thresholds, which are derived for stimulated Raman scattering (SRS), stimulated Brillouin scattering (SBS), and two plasmon decay (TPD), respectively. In this case, the parametric instabilities for the two beamlets develop independently and can be controlled at a low level provided the laser intensity for individual beamlet is low enough. Secondly, numerical simulations of parametric instabilities with two or more beamlets ($N\sim20$) have been carried out and the above theory model is validated. Simulations confirm that the development of parametric instabilities with multiple beamlets can be controlled at a low level, provided the threshold conditions for $\delta\omega_0$ is satisfied, even though the total laser intensity is as high as $\sim10^{15}$W/cm$^2$. With such a laser beam structure of multiple frequency components ($N\gtrsim20$) and total bandwidth of a few percentages ($\gtrsim4\%$), the parametric instabilities can be well-controlled.

Absolute instability modes due to rescattering of SRS in a large nonuniform plasma are studied theoretically and numerically. The backscattered light of convective SRS can be considered as a pump light with a finite bandwidth. The different frequency components of the backscattered light can be coupled to develop absolute stimulated Raman scattering (SRS) and two plasmon decay (TPD) instability near their quarter-critical densities via rescattering process. The absolute SRS mode develops a Langmuir wave with a high phase velocity about $c/\sqrt{3}$ with $c$ the light speed in vacuum. Given that most electrons are at low velocities in the linear stage, the absolute SRS mode grows with much weak Landau damping. When the interaction evolves into the nonlinear regime, the Langmuir wave can heat abundant electrons up to a few hundred keV. Our theoretical model is validated by particle-in-cell simulations. The absolute instabilities may play a considerable role in the experiments of inertial confined fusion.

We report a new scenario of time-of-flight (TOF) technique in which fast neutrons and delayed gamma-ray signals were both recorded in a millisecond time window in harsh environments induced by high-intensity lasers. The delayed gamma signals, arriving far later than the original fast neutron and often being ignored previously, were identified to be the results of radiative captures of thermalized neutrons. The linear correlation between gamma photon number and the fast neutron yield shows that these delayed gamma events can be employed for neutron diagnosis. This method can reduce the detecting efficiency dropping problem caused by prompt high-flux gamma radiation, and provides a new way for neutron diagnosing in high-intensity laser-target interaction experiments.

The high-frequency vibration of the imaging system degrades the quality of the reconstruction of ptychography by acting as a low-pass filter on ideal diffraction patterns. In this study, we demonstrate that by subtracting the deliberately blurred diffraction patterns from the recorded patterns and adding the properly amplified subtraction to the original data, the high-frequency components lost by the vibration of the setup can be recovered, and thus the image quality can be distinctly improved. Because no prior knowledge regarding the vibrating properties of the imaging system is needed, the proposed method is general and simple and has applications in several research fields., Comment: 13pages, 10figures