Search

Interlayer exchange coupling (IEC) between two magnetic layers sandwiched by a nonmagnetic spacer layer plays a critical role in shaping the magnetic properties of such heterostructures. The quantum anomalous Hall (QAH) effect has been realized in a structure composed of two magnetically doped topological insulator (TI) layers separated by an undoped TI layer. The quantized Hall conductance observed in this sandwich heterostructure originates from the combined contribution of the top and bottom surface states. In this work, we employ molecular beam epitaxy to synthesize a series of magnetic TI sandwiches with varying thicknesses of the middle undoped TI layer. The well-quantized QAH effect is observed in all these samples and its critical behavior is modulated by the IEC between the top and bottom magnetic TI layers. Near the plateau phase transition (PPT), we find that thinner QAH samples exhibit a two-dimensional critical metal behavior with nearly temperature-independent longitudinal resistance, whereas thicker QAH samples behave as a three-dimensional insulator with reduced longitudinal resistance at higher temperatures. The IEC-induced critical-metal-to-insulator transition in the QAH PPT regime can be understood through a two-channel Chalker-Coddington network model by tuning inter-channel tunneling. The agreement between experiment and theory strongly supports the QAH PPT within the Kosterlitz-Thouless framework, where the critical metal and disordered insulator phases exist in bound and unbound states of vortex-antivortex pairs, respectively., Comment: 19 pages, 4 figures, comments are very much welcome

The plateau phase transition in quantum anomalous Hall (QAH) insulators corresponds to a quantum state wherein a single magnetic domain gives way to multiple magnetic domains and then re-converges back to a single magnetic domain. The layer structure of the sample provides an external knob for adjusting the Chern number C of the QAH insulators. Here, we employ molecular beam epitaxy (MBE) to grow magnetic topological insulator (TI) multilayers with an asymmetric layer structure and realize the magnetic field-driven plateau phase transition between two QAH states with odd Chern number change {\Delta}C. In multilayer structures with C=+-1 and C=+-2 QAH states, we find two characteristic power-law behaviors between temperature and the scaling variables on the magnetic field at transition points. The critical exponents extracted for the plateau phase transitions with {\Delta}C=1 and {\Delta}C=3 in QAH insulators are found to be nearly identical, specifically, k1~0.390+-0.021 and k2~0.388+-0.015, respectively. We construct a four-layer Chalker-Coddington network model to understand the consistent critical exponents for the plateau phase transitions with {\Delta}C=1 and {\Delta}C=3. This work will motivate further investigations into the critical behaviors of plateau phase transitions with different {\Delta}C in QAH insulators and provide new opportunities for the development of QAH chiral edge current-based electronic and spintronic devices., Comment: 18 pages, 4 figures. Comments are welcome

Magnetic topological states refer to a class of exotic phases in magnetic materials with their non-trivial topological property determined by magnetic spin configurations. An example of such states is the quantum anomalous Hall (QAH) state, which is a zero magnetic field manifestation of the quantum Hall effect. Current research in this direction focuses on QAH insulators with a thickness of less than 10nm. The thick QAH insulators in the three-dimensional(3D) regime are limited, largely due to inevitable bulk carriers being introduced in thick magnetic TI samples. Here, we employ molecular beam epitaxy (MBE) to synthesize magnetic TI trilayers with a thickness of up to ~106 nm. We find these samples exhibit well-quantized Hall resistance and vanishing longitudinal resistance at zero magnetic field. By varying magnetic dopants, gate voltages, temperature, and external magnetic fields, we examine the properties of these thick QAH insulators and demonstrate the robustness of the 3D QAH effect. The realization of the well-quantized 3D QAH effect indicates that the nonchiral side surface states of our thick magnetic TI trilayers are gapped and thus do not affect the QAH quantization. The 3D QAH insulators of hundred-nanometer thickness provide a promising platform for the exploration of fundamental physics, including axion physics and image magnetic monopole, and the advancement of electronic and spintronic devices to circumvent Moore's law., Comment: 24 pages, 5 figures. Comments are welcome

An axion insulator is a three-dimensional (3D) topological insulator (TI), in which the bulk maintains the time-reversal symmetry or inversion symmetry but the surface states are gapped by surface magnetization. The axion insulator state has been observed in molecular beam epitaxy (MBE)-grown magnetically doped TI sandwiches and exfoliated intrinsic magnetic TI MnBi2Te4 flakes with an even number layer. All these samples have a thickness of ~10 nm, near the 2D-to-3D boundary. The coupling between the top and bottom surface states in thin samples may hinder the observation of quantized topological magnetoelectric response. Here, we employ MBE to synthesize magnetic TI sandwich heterostructures and find that the axion insulator state persists in a 3D sample with a thickness of ~106 nm. Our transport results show that the axion insulator state starts to emerge when the thickness of the middle undoped TI layer is greater than ~3 nm. The 3D hundred-nanometer-thick axion insulator provides a promising platform for the exploration of the topological magnetoelectric effect and other emergent magnetic topological states, such as the high-order TI phase., Comment: 25 pages, 5 figures. Comments are very much welcome

The quantum anomalous Hall (QAH) insulator is a topological quantum state with quantized Hall resistance and zero longitudinal resistance in the absence of an external magnetic field. The QAH insulator carries spin-polarized dissipation-free chiral edge current and thus provides a unique opportunity to develop energy-efficient transformative information technology. Despite promising advances on the QAH effect over the past decade, the QAH insulator has thus far eluded any practical applications. In addition to its low working temperature, the QAH state in magnetically doped topological insulator (TI) films/heterostructures usually deteriorates with time in ambient conditions. In this work, we prepare three QAH devices with similar initial properties and store them in different environments to investigate the evolution of their transport properties. The QAH device without a protection layer in air show clear degradation and becomes hole-doped with the charge neutral point shifting significantly to positive gate voltages. The QAH device kept in an argon glove box without a protection layer shows no measurable degradation after 560 hours and the device protected by a 3 nm AlOx protection layer in air shows minimal degradation with stable QAH properties. Our work shows a route to preserve the dissipation-free chiral edge state in QAH devices for potential applications in quantum information technology., Comment: 18 pages, 4 figures. A REU project. Comments are welcome

One-dimensional (1D) topologically protected states are usually formed at the interface between two-dimensional (2D) materials with different topological invariants. Therefore, 1D chiral interface channels (CICs) can be created at the boundary of two quantum anomalous Hall (QAH) insulators with different Chern numbers. Such a QAH junction can function as a chiral edge current distributer at zero magnetic field, but its realization remains challenging. Here, by employing an in-situ mechanical mask, we use molecular beam epitaxy (MBE) to synthesize QAH insulator junctions, in which two QAH insulators with different Chern numbers are connected along a 1D junction. For the junction between C = 1 and C = -1 QAH insulators, we observe quantized transport and demonstrate the appearance of the two parallel propagating CICs along the magnetic domain wall at zero magnetic field. Moreover, since the Chern number of the QAH insulators in magnetic topological insulator (TI)/TI multilayers can be tuned by altering magnetic TI/TI bilayer periods, the junction between two QAH insulators with arbitrary Chern numbers can be achieved by growing different periods of magnetic TI/TI on the two sides of the sample. For the junction between C = 1 and C = 2 QAH insulators, our quantized transport shows that a single CIC appears at the interface. Our work lays down the foundation for the development of QAH insulator-based electronic and spintronic devices, topological chiral networks, and topological quantum computations., Comment: 20 pages, 4 figures, comments are welcome

In quantum anomalous Hall (QAH) insulators, the interior is insulating but electrons can travel with zero resistance along one-dimensional conducting paths known as chiral edge channels (CECs). These CECs have been predicted to be confined to the one-dimensional (1D) edges and exponentially decay in the two-dimensional (2D) bulk. In this work, we present the results of a systematic study of QAH devices fashioned in a Hall bar geometry of different widths. At the charge neutral point, the QAH effect persists in a Hall bar device with a width of only ~72 nm, implying the intrinsic decaying length of CECs is less than ~36 nm. In the electron-doped regime, we find that the Hall resistance deviates quickly from the quantized value when the sample width is less than 1 um. Our theoretical calculations suggest that the deviation from the quantized Hall resistance in narrow QAH samples originates from the interaction between two opposite CECs mediated by disorder-induced bulk states in QAH insulators, consistent with our experimental observations., Comment: 19 pages, 5 figures, comments are welcome

A quantum anomalous Hall (QAH) insulator is a topological state of matter, in which the interior is insulating but electrical current flows along the edges of the sample, in either clockwise (right-handed) or counter-clockwise (left-handed) direction dictated by the spontaneous magnetization orientation. Such chiral edge current (CEC) eliminates any backscattering, giving rise to quantized Hall resistance and zero longitudinal resistance. In this work, we fabricate mesoscopic QAH sandwich (i.e. magnetic topological insulator (TI)/TI/magnetic TI) Hall bar devices and succeed in switching the CEC chirality in QAH insulators through spin-orbit torque (SOT) by applying a current pulse and suitably controlled gate voltage. The well-quantized QAH states with opposite CEC chiralities are demonstrated through four- and three-terminal measurements before and after SOT switching. Our theoretical calculations show that the SOT that enables the magnetization switching can be generated by both bulk and surface carriers in QAH insulators, in good agreement with experimental observations. Current pulse-induced switching of the CEC chirality in QAH insulators will not only advance our knowledge in the interplay between magnetism and topological states but also expedite easy and instantaneous manipulation of the QAH state in proof-of-concept energy-efficient electronic and spintronic devices as well as quantum information applications., Comment: 24 pages, 5 figures, comments are welcome