Search

Abstract. The rapid increase in energy demand in the city of Reykjavik has posed the need for an additional supply of hot water from deep geothermal energy. The deep hydraulic (re-)stimulation of well RV-43 on the peninsula of Geldinganes (north of Reykjavik) is an essential component of the plan implemented by Reykjavik Energy to meet this energy target. Hydraulic stimulation is often associated with fluid-induced seismicity, most of which is not felt on the surface, but which, in rare cases, can cause nuisance to the population and even damage to the nearby building stock. This study presents a first of its kind pre-drilling probabilistic induced-seismic hazard and risk analysis for the site of interest. Specifically, we provide probabilistic estimates of peak ground acceleration, European microseismicity intensity, probability of light damage (damage risk), and individual risk. The results of the risk assessment indicate that the individual risk within a radius of 2 km around the injection point is below 0.1 micromorts, and damage risk is below 10−2, for the total duration of the project. However, these results are affected by several orders of magnitude of variability due to the deep uncertainties present at all levels of the analysis, indicating a critical need in updating this a-priory risk assessment with in-situ data collected during the stimulation.

This article discusses the phenomenon of induced seismicity, which refers to the human-caused generation of tremors and seismic events that alter the state of subsurface stresses. The occurrence of induced seismicity during subsurface technologies, such as shale gas development and renewable energy extraction, can lead to project delays and concerns about safety and environmental impact. The article highlights the need to understand the mechanisms of induced seismicity and develop strategies to minimize its effects. It presents a collection of research papers that explore fluid-induced seismicity in various energy production and storage technologies, offering insights into the interplay between fluid injection, fault behavior, and subsurface structures. The findings contribute to evidence-based policymaking and regulatory processes, supporting the development of sustainable subsurface operations for renewable energy and decarbonization technologies. [Extracted from the article]

Enhanced geothermal systems (EGSs) developed by hydraulic stimulation are promising for exploiting petrothermal heat by improving fluid pathways in low-permeable geothermal reservoir rocks. However, fluid injection into the subsurface can potentially cause large seismic events by reactivating pre-existing faults, which is a significant barrier to EGSs. The management of injection-induced seismicity is, therefore, essential for the success of EGSs. During the hydraulic stimulation of an EGS, fluid can be injected into a fault zone or into the rock matrix containing pre-existing faults adjacent to the injection well. The differences in hydromechanical responses between fluid injection into and adjacent to a fault have not been investigated in detail. Here, we performed triaxial fluid injection experiments involving injecting fluid directly and indirectly into a fault in granite rock samples to analyse the distinct hydromechanical responses and estimate the injection-induced seismicity in both cases. Our results suggest that in addition to directly injecting fluid into a critically stressed fault, injecting into nearly intact granite adjacent to the fault could also cause injection-induced seismic hazards owing to the high fluid pressure required to create new fractures in the granite matrix. It is, therefore, important to carefully identify pre-existing faults within tight reservoirs to avoid injecting fluid adjacent to them. Additionally, once prior unknown faults are delineated during hydraulic stimulation, appropriate shut-in strategies should be implemented immediately to mitigate seismic risks. This article is part of the theme issue 'Induced seismicity in coupled subsurface systems'. [ABSTRACT FROM AUTHOR]

In this article, a high-resolution acoustic emission sensor, accelerometer, and broadband seismometer array data set is made available and described in detail from in situ experiments performed at Äspö Hard Rock Laboratory in May and June 2015. The main goal of the hydraulic stimulation tests in a horizontal borehole at 410 m depth in naturally fractured granitic rock mass is to demonstrate the technical feasibility of generating multi-stage heat exchangers in a controlled way superiorly to former massive stimulations applied in enhanced geothermal projects. A set of six, sub-parallel hydraulic fractures is propagated from an injection borehole drilled parallel to minimum horizontal in situ stress and is monitored by an extensive complementary sensor array implemented in three inclined monitoring boreholes and the nearby tunnel system. Three different fluid injection protocols are tested: constant water injection, progressive cyclic injection, and cyclic injection with a hydraulic hammer operating at 5 Hz frequency to stimulate a crystalline rock volume of size 30 m × 30 m × 30 m at depth. We collected geological data from core and borehole logs, fracture inspection data from an impression packer, and acoustic emission hypocenter tracking and tilt data, as well as quantified the permeability enhancement process. The data and interpretation provided through this publication are important steps in both upscaling laboratory tests and downscaling field tests in granitic rock in the framework of enhanced geothermal system research. Data described in this paper can be accessed at GFZ Data Services under 10.5880/GFZ.2.6.2023.004. [ABSTRACT FROM AUTHOR]