Search

For the first time, the flash sintering (FS) of high-purity alumina at room temperature, which was previously considered unachievable due to its low electrical conductivity, was conducted herein. The electrical arc originating from surface flashover was harnessed to induce FS at room temperature and low air pressure. The successful FS of high-purity alumina was realized at 60 kPa under the arc constraint, resulting in a notable relative density of the alumina sample of 98.7%. The electric–thermal coupling between the arc and high-purity alumina sample during the arc-induced FS process was analyzed via the finite element simulation method. The results revealed the thermal and electrical effects of the arc on the sample, which ultimately enhance the electrical conductivity of the alumina sample. The formation of a conductive channel on the sample surface, a result of increased electrical conductivity, was the pivotal factor in achieving FS in high-purity alumina at room temperature. The arc constraint technique can be applied to numerous materials, such as ionic conductors, semiconductors, and even insulators, under room-temperature and low-air-pressure conditions.

On maritime vessels, external factors such as explosions, collisions, and grounding can cause the emulsification of lubricating oil by seawater pollution, which can affect the lubrication of a ship’s thrust bearing. To explore the influence of the mixed emulsification of lubricating oil and seawater on the lubrication performance of thrust bearings, this study conducted an emulsification experiment, from which the viscosity equation of the oil–water mixture was obtained. A thermal hydrodynamic model (THD) of bearings considering oil–water mixed emulsification was established, and the Finite Difference Method (FDM) was used for analysis. The results show that according to the characteristics of the manifold, the mixture is divided into water-in-oil (W/O) and oil-in-water (O/W). In the W/O flow with higher viscosity, the film thickness becomes higher, but the power loss increases. In the O/W manifold with low viscosity, the thin film easily causes mixed friction. In the demulsification stage of the mixed liquid, the thickness loss of the film is huge, and the collision between the thrust-bearing pad and the inference plate may cause the pad to be ablated. The influence of specific heat capacity on temperature is greater than the temperature rise caused by viscosity.

Abstract In this study, we reported that flash sintering (FS) could be efficiently triggered at room temperature (25 °C) by manipulating the oxygen concentration within ZnO powders via a versatile defect engineering strategy, fully demonstrating a promising method for the repaid prototyping of ceramics. With a low concentration of oxygen defects, FS was only activated at a high onset electric field of ∼2.7 kV/cm, while arcs appearing on the surfaces of samples. Strikingly, the onset electric field was decreased to < 0.51 kV/cm for the activation of FS initiated, which was associated with increased oxygen concentrations coupled with increased electrical conductivity. Thereby, a general room-temperature FS strategy by introducing intrinsic structural defect is suggested for a broad range of ceramics that are prone to form high concentration of point defects.

Aiming at the problem that the traditional water-lubricated bearing cannot carry the heavy load and adapt to the constantly changing operating conditions for the high-power Rim Driven Thruster (RDT), the principle structure of the Magnetic Water-double-suspension Elastic-support Thrust Bearing (MWETB) is designed and the optimal structure parameters of the bearing are selected using simulation. To demonstrate the reliability of the MWETB under the RDTs’ actual working conditions, performance tests, which include the magnetic flux density, magnetic force, and lubrication performance, are carried out. The simulation and experimental results indicate that the optimal offset ratios are in two intervals, and the magnetic alignment and sheath materials have a great effect on the load reduction. The load-carrying force has obvious zoning characteristics with the change in bearing clearance. Besides, compared with the water-lubricated thrust bearings, the MWETB has advantages in terms of minimum film thickness and friction coefficient.

This paper presents a critical analysis of image-based 3D reconstruction using neural radiance fields (NeRFs), with a focus on quantitative comparisons with respect to traditional photogrammetry. The aim is, therefore, to objectively evaluate the strengths and weaknesses of NeRFs and provide insights into their applicability to different real-life scenarios, from small objects to heritage and industrial scenes. After a comprehensive overview of photogrammetry and NeRF methods, highlighting their respective advantages and disadvantages, various NeRF methods are compared using diverse objects with varying sizes and surface characteristics, including texture-less, metallic, translucent, and transparent surfaces. We evaluated the quality of the resulting 3D reconstructions using multiple criteria, such as noise level, geometric accuracy, and the number of required images (i.e., image baselines). The results show that NeRFs exhibit superior performance over photogrammetry in terms of non-collaborative objects with texture-less, reflective, and refractive surfaces. Conversely, photogrammetry outperforms NeRFs in cases where the object’s surface possesses cooperative texture. Such complementarity should be further exploited in future works.

Abstract Machine learning potential (MLP) has been a popular topic in recent years for its capability to replace expensive first-principles calculations in some large systems. Meanwhile, message passing networks have gained significant attention due to their remarkable accuracy, and a wave of message passing networks based on Cartesian coordinates has emerged. However, the information of the node in these models is usually limited to scalars, and vectors. In this work, we propose High-order Tensor message Passing interatomic Potential (HotPP), an E(n) equivariant message passing neural network that extends the node embedding and message to an arbitrary order tensor. By performing some basic equivariant operations, high order tensors can be coupled very simply and thus the model can make direct predictions of high-order tensors such as dipole moments and polarizabilities without any modifications. The tests in several datasets show that HotPP not only achieves high accuracy in predicting target properties, but also successfully performs tasks such as calculating phonon spectra, infrared spectra, and Raman spectra, demonstrating its potential as a tool for future research.

In recent years, the deep integration of basic research and clinical translational research of nanotechnology and oncology has led to the emergence of a new branch, namely integrated nano-oncology. This is an emerging and important interdisciplinary field, which plays an irreplaceable role in the diagnosis, treatment, early warning, monitoring and prevention of tumors, and has become a new interdisciplinary frontier. Here main advances of integrated nano-oncology was reviewed, mainly included controlled preparation of nanomaterials, ultra-sensitive detection of tumor biomarkers, multi-functional nanoimaging probes and integrated diagnosis and treatment technology, innovative nano drugs and nano drug delivery system, DNA nanotechnology, RNA nanotechnology, nano self-assembly technology, nanosensors, intelligent nanorobots, nanotherapeutic machines. The terms, concepts, trends and challenges are also discussed with the aim of promoting the application of nanotechnology in integrated oncology and solving the scientific and key technical problems in basic and clinical translational research of cancer.

BackgroundParanoia is a highly debilitating mental health condition. One novel intervention for paranoia is cognitive bias modification for paranoia (CBM-pa). CBM-pa comes from a class of interventions that focus on manipulating interpretation bias. Here, we aimed to develop and evaluate new therapy content for CBM-pa for later use in a self-administered digital therapeutic for paranoia called STOP (“Successful Treatment of Paranoia”). ObjectiveThis study aimed to (1) take a user-centered approach with input from living experts, clinicians, and academics to create and evaluate paranoia-relevant item content to be used in STOP and (2) engage with living experts and the design team from a digital health care solutions company to cocreate and pilot-test the STOP mobile app prototype. MethodsWe invited 18 people with living or lived experiences of paranoia to create text exemplars of personal, everyday emotionally ambiguous scenarios that could provoke paranoid thoughts. Researchers then adapted 240 suitable exemplars into corresponding intervention items in the format commonly used for CBM training and created 240 control items for the purpose of testing STOP. Each item included newly developed, visually enriching graphics content to increase the engagement and realism of the basic text scenarios. All items were then evaluated for their paranoia severity and readability by living experts (n=8) and clinicians (n=7) and for their item length by the research team. Items were evenly distributed into six 40-item sessions based on these evaluations. Finalized items were presented in the STOP mobile app, which was co-designed with a digital health care solutions company, living or lived experts, and the academic team; user acceptance was evaluated across 2 pilot tests involving living or lived experts. ResultsAll materials reached predefined acceptable thresholds on all rating criteria: paranoia severity (intervention items: ≥1; control items: ≤1, readability: ≥3, and length of the scenarios), and there was no systematic difference between the intervention and control group materials overall or between individual sessions within each group. For item graphics, we also found no systematic differences in users’ ratings of complexity (P=.68), attractiveness (P=.15), and interest (P=.14) between intervention and control group materials. User acceptance testing of the mobile app found that it is easy to use and navigate, interactive, and helpful. ConclusionsMaterial development for any new digital therapeutic requires an iterative and rigorous process of testing involving multiple contributing groups. Appropriate user-centered development can create user-friendly mobile health apps, which may improve face validity and have a greater chance of being engaging and acceptable to the target end users.

Abstract Purpose The association of patent foreman ovale (PFO) and cryptogenic stroke has been studied for years. Although device closure overall decreases the risk for recurrent stroke, treatment effects varied across different studies. In this study, we aimed to detect sub-clusters in post-closure PFO patients and identify potential predictors for adverse outcomes. Methods We analyzed patients with embolic stroke of undetermined sources and PFO from 7 centers in China. Machine learning and Cox regression analysis were used. Results Using unsupervised hierarchical clustering on principal components, two main clusters were identified and a total of 196 patients were included. The average age was 42.7 (12.37) years and 64.80% (127/196) were female. During a median follow-up of 739 days, 12 (6.9%) adverse events happened, including 6 (3.45%) recurrent stroke, 5 (2.87%) transient ischemic attack (TIA) and one death (0.6%). Compared to cluster 1 (n = 77, 39.20%), patients in cluster 2 (n = 119, 60.71%) were more likely to be male, had higher systolic and diastolic blood pressure, higher body mass index, lower high-density lipoprotein cholesterol and increased proportion of presence of atrial septal aneurysm. Using random forest survival (RFS) analysis, eight top ranking features were selected and used for prediction model construction. As a result, the RFS model outperformed the traditional Cox regression model (C-index: 0.87 vs. 0.54). Conclusions There were 2 main clusters in post-closure PFO patients. Traditional cardiovascular profiles remain top ranking predictors for future recurrence of stroke or TIA. However, whether maximizing the management of these factors would provide extra benefits warrants further investigations.

With the expansion of reserve cultivated land resources in coastal saline–alkali areas, the problem of soil salinization is becoming more and more prominent. In order to reveal the influence of different soil media and contact modes on soil water movement, a two-domain Hydrus-3D model was established to verify its performance in heterogeneous soil layers, and the characteristics of water, salt, and wet peak transport of surface soil and sandy soil under horizontal contact and inclined contact conditions were analyzed through experiments and simulations. The measured data show that in horizontal contact mode, probe 3 and probe 2 are close to the interface of the two layers of soil, and their maximum values are measured in about 60 min. The time difference between probe 1 and probe 2 is about 15 min. In the inclined contact mode, probe 4 in the topsoil reached 45% in 10 min and remained stable; the peak lag time of probes 3 and 2 was 10 min, and the peak lag time of probes 2 and 1 was 15 min; the water in the surface soil gradually increases and then stabilizes; and the water in the sand soil is similar to the normal curve. The salt characteristics in the surface soil are similar to the normal curve, while the salt characteristics in the sandy soil gradually increase and then stabilize. The simulation results show that the water content in the topsoil is more than 40%, and the maximum water content in the center of the sand is only 36.9%, which is roughly the same as the experimental results. The results showed that the Hydrus-3D model had a good simulation effect on the groundwater salt transport of heterogeneous soil under two contact methods. The RMSE value and E value are close to 0 and 1, respectively, indicating that the simulation has good feasibility and can be applied to the simulation of water and salt transport processes under different contact modes of soil media.

Individuals with narcissism are, by definition, self-centered, focus on self-benefit, and demonstrate less prosocial behaviors. Trusting strangers is risky, as it can result in exploitation and non-reciprocation. Thus, the trust may be antagonistic to narcissism. However, how narcissists make the choice to trust remains to be elucidated. The current study examined 44 participants (22 rated high in narcissism) playing as trustors in one-shot trust games, and their electroencephalograms were recorded. Individuals high in narcissism exhibited less trust toward strangers, especially following gaining feedback for their trust. In addition, narcissists exhibited a larger N2 following distrust and a stronger negatively-valanced difference in feedback-related negativity (dFRN) after trustee feedback. Our findings provide insights into how individuals with narcissism trust strangers. The results also shed light on the temporal course of brain activity involved in trust decision-making and outcome evaluation in individuals with narcissism.

Abstract Aims Oral contraceptives (OCs) are widely used in women of reproductive age, but their influences on heart failure (HF) development have yet to be reported. This study was performed to assess HF risk associated with OC use. Methods and results We studied women participating in the Multi‐Ethnic Study of Atherosclerosis with available data on OC use. Inverse probability of treatment weighting analyses were used to reduce baseline imbalances. Cox proportional hazards models were applied to evaluate the associations of OC use and HF risk. The primary analysis comprised a total of 3594 participants [average age 62.10 (10.24) years]. During an average follow‐up of 12.45 (3.75) years, 138 incident HF occurred. In unadjusted Cox model, OC use was associated with a decreased risk of HF [hazard ratio (HR) = 0.45, 95% confidence interval (CI) 0.31–0.64, P

Digital light processing (DLP)-based 3D printing is suitable to fabricate bone scaffolds with small size and high precision. However, the published literature mainly deals with the fabrication procedure and parameters of DLP printed bioceramic scaffold, but lacks the subsequent systematic biological evaluations for bone regeneration application. In this work, a biphasic calcium phosphate (BCP) macroporous scaffold was constructed by DLP-based 3D printing technique. Furthermore, bone morphogenetic protein-2 (BMP-2) was facilely incorporated into this scaffold through a facile polydopamine (PDA) modification process. The resultant scaffold presents an interconnected porous structure with pore size of ∼570 μm, compressive strength (∼3.6 MPa), and the self-assembly Ca-P/PDA nanocoating exhibited excellent sustained-release property for BMP-2. Notably, this BMP-2/PDA-BCP scaffold presents favorable effects on the adhesion, proliferation, osteogenic differentiation, and mineralization of bone marrow stromal cells (BMSCs). Furthermore, in vivo experiments conducted on rats demonstrated that the scaffolds could induce cell layer aggregation adjacent to the scaffolds and continuous new bone generation within the scaffold. Collectively, this work demonstrated that the BMP-2/PDA-BCP scaffold is of immense potential to treat small craniofacial bone defects in demand of high accuracy.

The ecological knowledge of seamounts has accumulated plentifully in recent years. However, there are few studies on the distribution and degradation pattern of organic matter in seamounts morphology by using microorganisms and nutrients as indicators. In this research, we investigated the dynamic distribution of nutrients, particulates and microbial communities of the summits, flanks and base in the M5 Pair-summit Seamount, aiming to better understand the distribution and degradation pattern of organic matter around the seamount. The results indicate that TOC concentration presented a gradual decrease from summit to base, and obtained the lowest value at Base1 (0.65 mg L−1). Illumina Hiseq high-throughput sequencing analysis shows that Firmicutes (38.86%) and Bacteroidetes (6.86%) on the seamount Base1 obtained the highest relative abundance, which were related to the degradation of organic matter caused by denitrification. The distribution of organic matter and composition of microbial communities formed disparity due to the morphology of seamounts. In addition, shallow seamounts and deep seamounts exhibited a high degree of temporal and spatial specificity. Summit1 produced organic matter from phytoplankton, with the highest TOC content (1.23 mg L−1), dominated in microorganisms of Cyanobacteria (18.06%), and an upwelling of nutrients due to the “seamount effect”. However, Summit2 utilized nitrifying bacteria Taumarchaeota to degrade organic matter. This research suggests that the unique topographic features of seamounts is essential to sustain the surrounding microbial composition and hydrodynamics, which can further promote the study of seamount ecological environment.

Abstract Background Adiponectin is a biomarker closely related to heart failure. However, its role in pulmonary hypertension remains unclear. In this study, we investigated the association between adiponectin and hemodynamic abnormalities, right ventricular function in patients with congenital heart disease associated pulmonary hypertension (CHD-PH). Methods Patients with CHD-PH were enrolled in this cross-sectional study. Linear regression analysis was performed to assess the association between adiponectin, N-terminal pro-Brain Natriuretic Peptide (NT-proBNP) and different clinical parameters. Results were depicted as beta-estimates(ß) with 95%-confidence intervals (95% CI). In addition, mediation and receiver operating characteristic curve analyses were used to analyze the relationships among adiponectin, NT-proBNP and right ventricular function. Results A total of 86 CHD-PH patients were included. The overall mean adiponectin concentration was 7.9 ± 5.8 μg/ml. Log adiponectin was positively correlated with pulmonary circulation index (ß = 2.2, 95% CI 0.5, 4.0), log NT-proBNP (ß = 0.22, 95% CI 0.04, 0.41) and inversely with the tricuspid annular plane systolic excursion (TAPSE, ß = -4.7, 95% CI -8.6, − 0.8). The mediation analysis revealed the association between NT-proBNP and TAPSE was fully mediated by adiponectin (total effect c = − 5.4, 95% CI -9.4, − 1.5, p = 0.013; direct effect c’ = − 3.7, 95% CI -7.5, 0.1, p = 0.067). Additionally, the efficiency of adiponectin for detecting right ventricular dysfunction was not inferior to NT-proBNP (AUC = 0.84, 95% CI 0.67–1.00 vs AUC = 0.74, 95% CI 0.51–0.97, p = 0.23). Conclusions Adiponectin is closely correlated with pulmonary blood flow and right ventricular function and may be a valuable biomarker for disease assessment in patients with pulmonary hypertension.

Abstract Malnutrition plays a crucial role in pulmonary hypertension (PH). The prognostic nutritional index (PNI) is a reliable indicator for nutritional status assessment. However, its relationship with mortality risk in PH patients has not yet been investigated. This study analyzed data from the Patient Registry for Primary PH. PNI was calculated through albumin and lymphocyte counts. Subjects with missing data for PNI calculation were excluded. The primary endpoint was all‐cause mortality. Cox proportional hazard model was used to calculate the hazard ratios (HRs) and 95% confidence intervals (CIs). Of the 317 patients records available in the registry, we finally included 136 patients. The average age of the included subjects was 40.56 (14.91) years and 63.24% (86/136) were female. In our analysis of Cox regression, per 1‐point increment of PNI was associated with 4% decreased risk of mortality in PH patients (age‐ and sex‐adjusted HR: 0.96, 95% CI: 0.93–0.98, p = 0.002). We further categorized these subjects by quartiles of PNI. Compared to quartile 4, the age‐ and sex‐adjusted HRs of death for quartiles 1, 2, and 3 were 2.39 (95% CI: 1.21–4.72, p = 0.01), 2.25 (95% CI: 1.15–4.39, p = 0.02), and 1.72 (95% CI: 0.84–3.52, p = 0.14). In addition, logistic regression analyses suggested a positive correlation of PNI with total lung capacity (β = 0.98, p = 0.002) and forced expiratory volume in 1 min (β = 1.53, p = 0.03). This study demonstrates that low PNI was associated with an increased risk of death in PH patients. These findings help to enlighten our understanding of the nutritional status and adverse outcomes in PH patients.