Search

Due to the lack of a pathogen-killing process, foodborne outbreaks from contaminated fresh produce have been increasing worldwide. Hence, it is increasingly recognized that the washing step with sanitizers is important to control microbial contamination. Ozonated water is suggested as a substitute for chlorine-based sanitizers, addressing concerns about the effectiveness and environmental impact of chlorine-based sanitizers. However, using ozone as a sanitizer in the fresh produce washing process is still challenging because of its unstable and inconsistent antimicrobial effectiveness under various testing conditions. A meta-analysis was focused on the comparison of antimicrobial effectiveness between different ozonation methods commonly adopted in laboratory settings, including stationary pre-ozonated water, agitated pre-ozonated water, and sparging. The meta-analysis showed that the sparging method results in the highest microbial log reduction compared to other methods. We further developed meta-regression models based on three ozonation methods to identify key processing variables influencing the antimicrobial effectiveness of ozonated water. Attempts were made to link key processing variables to ozone stability and the mass transport phenomena involved in the washing process. This research will contribute to designing and developing a washing process to increase fresh produce safety by identifying key factors in each ozonation method and facilitate interlaboratory comparison studies. [ABSTRACT FROM AUTHOR]

The work reports a novel nanophytosomal gel encapsulating Alpinia galanga (L.) Willd leaf essential oil to treat periodontal infections. Alpinia oil-loaded nanophytosomes (ANPs) were formulated by lipid layer hydration technique and were evaluated by FESEM, cryo-TEM, loading efficiency, zeta potential, particle size, release profile etc. Selected ANPs-loaded gel (ANPsG) was evaluated by both in vitro and in vivo methods. Selected ANPs were spherical, unilamellar, 49.32 ± 2.1 nm size, 0.45 PDI, −46.7 ± 0.8 mV zeta potential, 9.8 ± 0.5% (w/w) loading, 86.4 ± 3.02% (w/w) loading efficiency with sustained release profile. ANPsG showed good spreadability (6.8 ± 0.3 gm.cm/sec), extrudability (79.33 ± 1.5%), viscosity (36522 ± 0.82 cps), mucoadhesive strength (44.56 ± 3.5 gf) with sustained ex vivo release tendency. Satisfied ZOI and MIC was observed for ANPsG against periodontal bacteria vs. standard/control. ANPsG efficiently treated infection in ligature induced periodontitis model. Key pharmacokinetic parameters like AUC, MRT, Vd were enhanced for ANPsG. ANPsG may be investigated for futuristic clinical studies. [ABSTRACT FROM AUTHOR]

Due to the lack of a pathogen-killing process, foodborne outbreaks from contaminated fresh produce have been increasing worldwide. Hence, it is increasingly recognized that the washing step with sanitizers is important to control microbial contamination. Ozonated water is suggested as a substitute for chlorine-based sanitizers, addressing concerns about the effectiveness and environmental impact of chlorine-based sanitizers. However, using ozone as a sanitizer in the fresh produce washing process is still challenging because of its unstable and inconsistent antimicrobial effectiveness under various testing conditions. A meta-analysis was focused on the comparison of antimicrobial effectiveness between different ozonation methods commonly adopted in laboratory settings, including stationary pre-ozonated water, agitated pre-ozonated water, and sparging. The meta-analysis showed that the sparging method results in the highest microbial log reduction compared to other methods. We further developed meta-regression models based on three ozonation methods to identify key processing variables influencing the antimicrobial effectiveness of ozonated water. Attempts were made to link key processing variables to ozone stability and the mass transport phenomena involved in the washing process. This research will contribute to designing and developing a washing process to increase fresh produce safety by identifying key factors in each ozonation method and facilitate interlaboratory comparison studies.

Abstract Objectives The study aimed to compare the antibacterial effect of a novel disinfectant, hyper-pure chlorine dioxide (hClO2) to sodium hypochlorite (NaOCl) in various depths of dentin tubules. Materials and methods The distal root of the extracted lower molars was infected artificially with Enterococcus faecalis. The control group was rinsed with saline, and the test groups were irrigated with either 5% NaOCl or 0.12% hClO2. The longitudinally split teeth were stained by viability stain. The coronal third of the root was scanned with a confocal laser scanning microscope. The fluorescent intensities were measured, and the percentage of dead bacteria was calculated at depths up to 950 μm along the dentin tubules. The effect of penetration depth, irrigants, and their interaction on antimicrobial efficacy was determined by the linear mixed model. Results The percentage of dead bacteria was higher both in the NaOCl (45.1 ± 2.3%, p

The condensation product of the reaction between aniline and salicylaldehyde was a 2-(2-hydroxybenzylidinemine)—aniline Schiff base bidentate ligand (L). L was used to generate complexes by interacting with the metal ions lanthanum(III), zirconium(IV), yttrium(III), and copper(II), in addition to cobalt(II). Various physicochemical techniques were utilized to analyze the synthesized L and its metal chelates, including elemental analysis (CHN), conductimetry (Λ), magnetic susceptibility investigations (μeff), Fourier-transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance (1H NMR) spectroscopy, ultraviolet–visible (UV-Vis.) spectrophotometry, and thermal studies (TG/DTG). FT-IR revealed that the L molecule acted as a bidentate ligand by binding to metal ions via both the oxygen atom of the phenolic group in addition to the nitrogen atom of the azomethine group. Additionally, 1H NMR data indicated the formation of complexes via the oxygen atom of the phenolic group. An octahedral geometrical structure for all of the chelates was proposed according to the UV-Vis. spectra and magnetic moment investigations. Thermal analysis provided insight into the pattern of L in addition to its chelates’ breakdown. In addition, the investigation furnished details on the chelates’ potential chemical formulas, the characteristics of adsorbed or lattice H2O molecules, and the water that is coordinated but separated from the structure at temperatures exceeding 120 °C. The thermodynamic parameters utilizing Coats–Redfern in addition to Horowitz–Metzger equations were studied. The antimicrobial effectiveness of L and its chelates against distinct species of bacteria and fungi was studied using the disc diffusion method. Cu(II) and Y(III) chelates had significant antimicrobial activity against Staphylococcus aureus and Micrococcus luteus.

Background: The number of periprosthetic joint infections caused by vancomycin-resistant pathogens is increasing. Currently, no PMMA cement is commercially available to cover VRE. Daptomycin shows promising results in treating infection, offering a good safety profile and a reduced risk of developing resistance. The purpose of this in vitro study was to investigate the mechanical stability, handling properties, elution behavior, and antimicrobial effectiveness of PMMA cement loaded with three different daptomycin concentrations in comparison to commercially available antibiotic-loaded bone cement (ALBC). Methods: Mechanical properties and handling characteristics (ISO 5833, DIN 53435), HPLC elution, antimicrobial effectiveness with proliferation assay (DIN 17025), and inhibition zone testing were investigated. Results: All tested daptomycin concentrations met the ISO and DIN standards for mechanical strength. Loading of 40 g of PMMA cement with 0.5 g of daptomycin did not show any antimicrobial effectiveness, in contrast to 1.0 g and 1.5 g. PMMA cement with 1.5 g of daptomycin was the best in terms of elution and effectiveness, and it showed good ISO mechanical strength; ISO doughing was sticky for a little longer and setting was faster compared to the vancomycin-containing reference cement. Conclusion: PMMA cement containing 0.5 g of gentamicin and 1.5 g of daptomycin could be a good alternative to the already established COPAL® (Wehrheim, Germany) G+V for the treatment of PJIs caused by VRE. [ABSTRACT FROM AUTHOR]

The condensation product of the reaction between aniline and salicylaldehyde was a 2-(2-hydroxybenzylidinemine)—aniline Schiff base bidentate ligand (L). L was used to generate complexes by interacting with the metal ions lanthanum(III), zirconium(IV), yttrium(III), and copper(II), in addition to cobalt(II). Various physicochemical techniques were utilized to analyze the synthesized L and its metal chelates, including elemental analysis (CHN), conductimetry (Λ), magnetic susceptibility investigations (μeff), Fourier-transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance (1H NMR) spectroscopy, ultraviolet–visible (UV-Vis.) spectrophotometry, and thermal studies (TG/DTG). FT-IR revealed that the L molecule acted as a bidentate ligand by binding to metal ions via both the oxygen atom of the phenolic group in addition to the nitrogen atom of the azomethine group. Additionally, 1H NMR data indicated the formation of complexes via the oxygen atom of the phenolic group. An octahedral geometrical structure for all of the chelates was proposed according to the UV-Vis. spectra and magnetic moment investigations. Thermal analysis provided insight into the pattern of L in addition to its chelates' breakdown. In addition, the investigation furnished details on the chelates' potential chemical formulas, the characteristics of adsorbed or lattice H2O molecules, and the water that is coordinated but separated from the structure at temperatures exceeding 120 °C. The thermodynamic parameters utilizing Coats–Redfern in addition to Horowitz–Metzger equations were studied. The antimicrobial effectiveness of L and its chelates against distinct species of bacteria and fungi was studied using the disc diffusion method. Cu(II) and Y(III) chelates had significant antimicrobial activity against Staphylococcus aureus and Micrococcus luteus. [ABSTRACT FROM AUTHOR]

Throughout the tropical and subtropical climates, the genus Citrus can be found. The current study was conducted to extract the Citrus sinensis peel oil and evaluate its antibacterial, antifungal and antiparasitic potential. Petroleum ether was used to extract the C. sinensis peel oil through a Soxhlet apparatus. The antimicrobial and antifungal potential was determined via agar well diffusion method and minimum inhibitory concentrations (MIC) were calculated (test bacterial strains: Staphylococcus aureus, Escherichia coli and Streptococcus agalactiae; test fungal strains: Aspergillus flavus, Aspergillus niger, Altrnaria alternata). Antiparasitic activity against Leishmaniatropica was determined following standard protocol using amphotericin-B as positive and Dimethyl Sulfoxide (DMSO) as a negative control and the percentage inhibition was calculated. The oil extracted was brownish yellow with a tangy smell, water-insoluble, density (0.778 g/cm3) and specific gravity (0.843 g/cm). In antibacterial activity, the diameter of the zone of inhibition was maximum against E. coli (14 mm) and minimum for S. agalactiae (10 mm). While in antifungal activity diameter of the zone of inhibition was maximum against A. flavus (12.5 mm) and minimum for A. alternata (8.6 mm). S. agalactiae exhibited the minimum MIC value (6 mg/mL) and in fungal strains A. alternata exhibited the minimum value (2 mm). Citrus sinensis peel oil displayed antileishmanial efficiency of 60% at 50 μg/mL concentration after 48 h of incubation. C. sinensis peel oil demonstrated antimicrobial capabilities, implying that it could be used as a natural preservative in food or as an effective treatment against a variety of pathogenic organisms. Industries should extract oil from the waste of citrus fruits which will be beneficial from an economic point of view. [ABSTRACT FROM AUTHOR]

Nanofibers were obtained using four different solutions including polyurethane (PU), ferrocene (Fer) and silver (Ag)-incorporated polyurethane matrix (PU-Fer, PU-FerAg1, PU-FerAg2) via electrospinning process and analyzed in terms of gas adsorption capability and antimicrobial activity. The synthesized compounds and electrospun nanofibers were characterized (FTIR, XRD, SEM) and analyzed in terms of thermal stability and gas adsorption effectiveness via DSC and BET, respectively. The data prove the existence of the Fer structure in the PU nanofilm and successful fabrication of Ag-incorporated PU-Fer composite nanofibers. The antimicrobial activity in the related solutions was also observed using Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) bacteria. The observations depict that incorporation of ferrocene and silver in polyurethane matrix exhibits a maximum increment of 7.14% in solution viscosity (comparison between PU and PU-FerAg2). As expected, this incorporation demonstrates a dramatic increase of 5006% in conductivity due to metal existence in the solution. Furthermore, PU-FerAg2 steps forward with a minimum fiber diameter of 307 ± 233 nm, maximum BET surface area of 39.1 m2/g, maximum adsorbed N2 gas volume of 8.94 cc/g and best antimicrobial effectiveness for both bacteria species. Eventually, the features of the nanofibers electrospun from PU-FerAg polymeric matrixes come into prominence in terms of fabricating antimicrobial textiles for wound covers and gas adsorption mechanisms. [ABSTRACT FROM AUTHOR]

Chronic wounds represent a serious worldwide concern, being often associated with bacterial infections. As the prevalence of bacterial infections increase, it is crucial to search for alternatives. Essential oils (EOs) constitute a promising option to antibiotics due to their strong anti-inflammatory, analgesic, antioxidant and antibacterial properties. However, such compounds present high volatility. To address this issue, a drug delivery system composed of coaxial wet-spun fibers was engineered and different EOs, namely clove oil (CO), cinnamon leaf oil (CLO) and tea tree oil (TTO), were loaded. Briefly, a coaxial system composed of two syringe pumps, a coagulation bath of deionized water, a cylindrical-shaped collector and a coaxial spinneret was used. A 10 % w / v polycaprolactone (PCL) solution was combined with the different EOs at 2 × minimum bactericidal concentration (MBC) and loaded to a syringe connected to the inner port, whereas a 10 % w / v cellulose acetate (CA) solution mixed with 10 % w/v polyethylene glycol (PEG) at a ratio of 90:10 % v /v (to increase the fibers' elasticity) was loaded to the syringe connected to the outer port. This layer was used as a barrier to pace the release of the entrapped EO. The CA's inherent porosity in water coagulation baths allowed access to the fiber's core. CA was also mixed with 10 % w/v polyethylene glycol (PEG) at a ratio of 90:10 % v/v (CA:PEG), to increase the fibers' elasticity. Microfibers maintained their structural integrity during 28 days of incubation in physiological-like environments. They also showed high elasticities (maximum elongations at break >300 %) and resistance to rupture in mechanical assessments, reaching mass losses of only ≈ 2.29 % - 57.19 %. The EOs were released from the fibers in a prolonged and sustained fashion, in which ≈ 30 % of EO was released during the 24 h of incubation in physiological-like media, demonstrating great antibacterial effectiveness against Staphylococcus aureus , Staphylococcus epidermidis , Escherichia coli and Pseudomonas aeruginosa , the most prevalent bacteria in chronic wounds. Moreover, microfibers showed effective antioxidant effects, presenting up to 59 % of reduction of 2,2-diphenyl-1-picrylhydrazyl (DPPH) activity. Furthermore, the coaxial system was deemed safe for contact with fibroblasts and human keratinocytes, reaching metabolic activities higher than 80 % after 48 h of incubation. Data confirmed the suitability of the engineered system for potential therapeutics of chronic wounds. [Display omitted] • Coaxial wet-spun fibers loaded with three essential oils were successfully produced. • Formation of fibers with coaxial structure was demonstrated via brightfield microscopy and SEM. • The antioxidant and antibacterial properties were confirmed. • The engineered fibrous construct allowed for a controlled and sustained release of the essential oils. • Cytocompatibility tests proved the fibers' safety and suitability for their foreseen application. [ABSTRACT FROM AUTHOR]

Background: The number of periprosthetic joint infections caused by vancomycin-resistant pathogens is increasing. Currently, no PMMA cement is commercially available to cover VRE. Daptomycin shows promising results in treating infection, offering a good safety profile and a reduced risk of developing resistance. The purpose of this in vitro study was to investigate the mechanical stability, handling properties, elution behavior, and antimicrobial effectiveness of PMMA cement loaded with three different daptomycin concentrations in comparison to commercially available antibiotic-loaded bone cement (ALBC). Methods: Mechanical properties and handling characteristics (ISO 5833, DIN 53435), HPLC elution, antimicrobial effectiveness with proliferation assay (DIN 17025), and inhibition zone testing were investigated. Results: All tested daptomycin concentrations met the ISO and DIN standards for mechanical strength. Loading of 40 g of PMMA cement with 0.5 g of daptomycin did not show any antimicrobial effectiveness, in contrast to 1.0 g and 1.5 g. PMMA cement with 1.5 g of daptomycin was the best in terms of elution and effectiveness, and it showed good ISO mechanical strength; ISO doughing was sticky for a little longer and setting was faster compared to the vancomycin-containing reference cement. Conclusion: PMMA cement containing 0.5 g of gentamicin and 1.5 g of daptomycin could be a good alternative to the already established COPAL® (Wehrheim, Germany) G+V for the treatment of PJIs caused by VRE.

The human papillomavirus (HPV) vaccine is the simplest, most economical, convenient, and effective method of preventing cervical cancer. However, the current HPV vaccine is supplied as a single-dose vial with a relatively high cost per dose, which hinders its supply to low- and middle-income countries (LMICs), where the demand for HPV vaccine is highest. Therefore, it is necessary to develop a multi-dose HPV vaccine to promote large-scale affordable vaccination in LMICs. Moreover, the addition of preservatives is required to reduce the risk of microbial contamination in multi-dose vaccines within a single vial. In this study, we investigated the effects of six preservatives on HPV 16L1 and 18L1 virus-like particles in solution, as well as the aluminum adsorption status, under normal and high-temperature conditions. Multiple methods were employed, including dynamic light scattering, differential scanning calorimetry, an in vitro relative potency assay, and an in vivo potency assay in mice. Based on the above results, four types of selected preservatives were further studied, and an antimicrobial effectiveness test was performed on the HPV-2 vaccine, which was employed as a model HPV vaccine. Finally, three preservatives were selected based on their performance to evaluate the long-term stability of the HPV-2 vaccine. The results indicated that 0.12% methylparaben is the most suitable preservative for the multi-dose HPV-2 vaccine, guaranteeing the shelf life for at least three years and meeting “B” standards for antimicrobial effectiveness. The formula developed in this study can contribute toward combating cervical cancer in LMICs.

Throughout the tropical and subtropical climates, the genus Citrus can be found. The current study was conducted to extract the Citrus sinensis peel oil and evaluate its antibacterial, antifungal and antiparasitic potential. Petroleum ether was used to extract the C. sinensis peel oil through a Soxhlet apparatus. The antimicrobial and antifungal potential was determined via agar well diffusion method and minimum inhibitory concentrations (MIC) were calculated (test bacterial strains: Staphylococcus aureus, Escherichia coli and Streptococcus agalactiae; test fungal strains: Aspergillus flavus, Aspergillus niger, Altrnaria alternata). Antiparasitic activity against Leishmaniatropica was determined following standard protocol using amphotericin-B as positive and Dimethyl Sulfoxide (DMSO) as a negative control and the percentage inhibition was calculated. The oil extracted was brownish yellow with a tangy smell, water-insoluble, density (0.778 g/cm3) and specific gravity (0.843 g/cm). In antibacterial activity, the diameter of the zone of inhibition was maximum against E. coli (14 mm) and minimum for S. agalactiae (10 mm). While in antifungal activity diameter of the zone of inhibition was maximum against A. flavus (12.5 mm) and minimum for A. alternata (8.6 mm). S. agalactiae exhibited the minimum MIC value (6 mg/mL) and in fungal strains A. alternata exhibited the minimum value (2 mm). Citrus sinensis peel oil displayed antileishmanial efficiency of 60% at 50 μg/mL concentration after 48 h of incubation. C. sinensis peel oil demonstrated antimicrobial capabilities, implying that it could be used as a natural preservative in food or as an effective treatment against a variety of pathogenic organisms. Industries should extract oil from the waste of citrus fruits which will be beneficial from an economic point of view.

Origanum syriacum (O. syriacum) (L.) belongs to Group B of the genus Origanum from (Lamiaceae), which is rich in essential oils that exhibit antimicrobial efficacy, anti-inflammatory efficacy, antioxidant activity, and antitumor efficacy. These processing activities are because of its richness in carvacrol and Thymol. In this article, we will focus on O. syriacum, discussing the antimicrobial efficacy for its essential oil and extracts, in addition, cast light on mechanism of essential oil antimicrobial action. This study was conducted from March 2019 to February 2021. We have analyzed the results of studies on antimicrobial efficacy of a plant O. syriacum in the PubMed, Google Scholar, Elsevier over the past 15 years using keywords. O. syriacum essential oil and its extracts have an extensive antimicrobial efficacy give it a great importance in pharmaceutical and medical purposes.

Antiseptics – besides mechanical debridement – have an important role in the treatment of destructive periodontitis. Subgingival drug delivery systems containing chlorhexidine gluconate (CHX) may enhance or be a substitute to non-surgical therapy. In this article, we investigate a CHX-containing drug delivery system which is solid at room temperature but softens at body temperature. The examination was focused on the hardness, the drug diffusion profile and the antimicrobial effectiveness of the formulation. Hardness was analyzed with a texture analyzer equipped with a spherical probe 5 mm in diameter. The investigation was carried out at 25 and 37 °C. The drug diffusion from formulations was investigated for one week in PBS solution. The antimicrobial effectiveness of the delivery systems was analyzed on 6 different anaerobic bacterial strains. Results show that hardness of formulations at 25 °C is around 2000 mN which is suitable for handling and insertion, whereas at 37 °C in PBS solution, hardness decreases greatly (to 800 mN) which contributes to the accommodation of the delivery systems to the shape of the periodontal pocket, the penetration of gingival crevicular fluid and the drug diffusion from formulations. Results of the drug diffusion study indicate that 50% of the CHX diffused from the formulations during the one-week period and a concentration of 8 μg/mL were maintained in the acceptor phase after 24 hours. Formulations effectively inhibited the growth of anaerobic bacteria for at least one week and showed similar effectiveness to formulations containing amoxicillin or the combination of metronidazole and zinc hyaluronate. Our results suggest that this delivery system alone or in combination with mechanical debridement may be effective in the treatment of periodontitis.

Origanum syriacum (O. syriacum) (L.) belongs to Group B of the genus Origanum from (Lamiaceae), which is rich in essential oils that exhibit antimicrobial efficacy, anti-inflammatory efficacy, antioxidant activity, and antitumor efficacy. These processing activities are because of its richness in carvacrol and Thymol. In this article, we will focus on O. syriacum, discussing the antimicrobial efficacy for its essential oil and extracts, in addition, cast light on mechanism of essential oil antimicrobial action. This study was conducted from March 2019 to February 2021. We have analyzed the results of studies on antimicrobial efficacy of a plant O. syriacum in the PubMed, Google Scholar, Elsevier over the past 15 years using keywords. O. syriacum essential oil and its extracts have an extensive antimicrobial efficacy give it a great importance in pharmaceutical and medical purposes. [ABSTRACT FROM AUTHOR]

New approaches are required for prevention and control of biofilm-producing bacteria and consequently mitigating the health problems of bovine clinical mastitis. This work designed to determine prevalence rates of biofilm-producing bacteria that causing bovine clinical mastitis and evaluate the anti-biofilm effectiveness of novel nanocomposite of zinc–aluminum layered double hydroxide intercalated with gallic acid (GA) as chelating agent (Zn-Al LDH/GA) on the prevention and control of environmental pathogenic bacteria; Escherichia coli (E. coli), Klebsiella pneumoniae (K. pneumoniae), Staphylococcus aureus (S. aureus), and Coagulase-negative staphylococci (CNS), besides Listeria monocytogenes (L. monocytogenes) and assess the ability to use as an antimicrobial agent, and/or sanitizer for milking equipment. All samples (n = 230) involved clinical mastitis cow's milk (n = 50) beside environmental samples (n = 180) were collected then examined for isolation and identification of bacterial pathogens. Zn-Al LDH/GA nanocomposite was synthesized using co-precipitation method, then characterized by Fourier-transform infrared spectroscopy (FT-IR); X-ray diffraction (XRD); field emission scanning electron microscopy (FESEM); high-resolution transmission electron microscopy (HRTEM); thermogravimetric analysis (TGA); differential thermal analysis (DTA); zeta potential; DLS analysis; and Brunauer, Emmett, and Teller (BET) surface area. The anti-biofilm activity of nanocomposite against mastitis-causing bacteria was detected using the broth micro-dilution and disc-diffusion assay. Results, the minimum concentration of Zn-Al LDH/GA that inhibited the growth of gram-positive and negative bacteria, were 312–625 and 5000 μg/mL, respectively. The LD50 of Zn-Al LDH/GA was determined in mice at 1983.3 mg/kg b.wt. As a conclusion, Zn-Al LDH/GA nanocomposite proved its efficiency as an antimicrobial agent and/or sanitizer used for cleaning of milking equipment, due to it could inhibit the growth and multiplication of potentially pathogenic bacteria that causing clinical mastitis and its formation of biofilm on the milking equipment. Zn-Al LDH/GA was found to use under varying pH conditions compared with other commercial sanitizer used besides the formation of nanocomposite increases the material stability. [ABSTRACT FROM AUTHOR]

Copyright of Fogorvosi Szemle is the property of Hungarian Dental Association and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

[Display omitted] Effective treatment of vaginal infections with conventional antibiotics often faces challenges like unavoidable dose-related side effects with increased risk of bacterial resistance. The study aims to deliver linezolid through natural gum based mucoadhesive nano lipogel to improve therapeutic effectiveness against vaginal infections. The linezolid loaded nanoliposomes (LNLs) were developed by thin film hydration method and were characterized by FTIR, DSC, XRD, FESEM, particle size analysis, zeta potential, drug loading capacity, in vitro release study etc. Selected LNLs was loaded into suitable gel formulation containing Aegle marmelos gum (as the mucoadhesive agent) and evaluated for in vitro , in vivo potentiality. FTIR/DSC test confirmed absence of any major interaction between selected drug and excipients. XRD showed amorphization of the drug encapsulated in NLs. FESEM studies showed spherical LNLs having smooth surface. LNLs had nanosize (51.03 nm), negative surface charge (-25.7 mV), satisfied drug loading capacity (11.5 ± 0.7 %) with sustained drug release. The experimental LNLs loaded lipogel showed desired physico-chemical properties viz. viscosity (37000 cps), spreadability (6.5 gm.cm sec -1), mucoadhesion (21.9 gf) and 61.04 % release of drug across rabbit vaginal mucosal membrane. The nanolipo gel exhibited improved antimicrobial activity against E. coli and C. albicans with respect to the pure linezolid. A good correlation was observed in between in vitro drug release and ex vivo permeation. Improved pharmacokinetic parameters like AUC, AUMC, MRT, V d was observed for experimental nanolipo gel Vs. marketed formulation. The experimental nanolipo gel could be explored further for futuristic clinical application. [ABSTRACT FROM AUTHOR]

Background: Microorganisms in the oral cavity are still considered as serious public health problems and inflict a costly burden to health care services in and around the world. Mouthrinses have been used for centuries with the objective of reducing the amount of microorganisms in the oral cavity. Mouthrinses are used as adjuncts to mechanical oral hygiene. Therapeutic mouthwashes are often recommended as an adjunct to mechanical plaque control for prevention of plaque accumulation and to maintain gingival and periodontal health. Mechanical control alone for reducing recalcitrant biofilms in the oral cavity has been challenged because it is considered to be rather time-consuming and most importantly insufficient for effective oral hygiene. The aim of this study was to evaluate the antimicrobial efficacy of herbal and 0.2% chlorhexidine gluconate mouthrinse against Streptococcus mutans. Materials and Methods: The antimicrobial effectiveness (zone of inhibition) of an herbal mouthrinse and 0.2% chlorhexidine mouthrinse was determined by agar well diffusion method. Results: The zone of inhibition of S. mutans was 19 mm for the 0.2% chlorhexidine mouthrinse. The arowash liquid mouthrinse shows that S. mutans do not produce a zone of inhibition. Conclusion: Chlorhexidine mouthrinse (0.2%) has a better antimicrobial efficacy against the S. mutans when compared to herbal mouthrinse (arowash liquid). [ABSTRACT FROM AUTHOR]

The effectiveness of Asarum sieboldii extracts as an environmental-friendly fumigant to mitigate the aging of Korean paper cultural heritage made of traditional paper called Hanji was examined. As results, antimicrobial activity of A . sieboldii extracts against Aspergillus versicolor on Hanji is observed at the concentration exceeding 25 mg. As the short-term change of Hanji property right after treatment of A . sieboldii extracts exceeding 25 mg, it is observed that the physical and optical properties of initial Hanji decreased with the increases of the extracts concentration. In terms of the long-term change by artificial aging test, however, the aging rate of Hanji samples treated by A . sieboldii extracts is similar to that of non-treated Hanji samples. It means that A . sieboldii extracts do not degrade the stability of Hanji property. Overall, these results demonstrate that A . sieboldii extracts may have the potential as a fumigant to the Korean paper cultural heritage due to their antimicrobial effectiveness and long-term permanence. [ABSTRACT FROM AUTHOR]

The human papillomavirus (HPV) vaccine is the simplest, most economical, convenient, and effective method of preventing cervical cancer. However, the current HPV vaccine is supplied as a single-dose vial with a relatively high cost per dose, which hinders its supply to low- and middle-income countries (LMICs), where the demand for HPV vaccine is highest. Therefore, it is necessary to develop a multi-dose HPV vaccine to promote large-scale affordable vaccination in LMICs. Moreover, the addition of preservatives is required to reduce the risk of microbial contamination in multi-dose vaccines within a single vial. In this study, we investigated the effects of six preservatives on HPV 16L1 and 18L1 virus-like particles in solution, as well as the aluminum adsorption status, under normal and high-temperature conditions. Multiple methods were employed, including dynamic light scattering, differential scanning calorimetry, an in vitro relative potency assay, and an in vivo potency assay in mice. Based on the above results, four types of selected preservatives were further studied, and an antimicrobial effectiveness test was performed on the HPV-2 vaccine, which was employed as a model HPV vaccine. Finally, three preservatives were selected based on their performance to evaluate the long-term stability of the HPV-2 vaccine. The results indicated that 0.12% methylparaben is the most suitable preservative for the multi-dose HPV-2 vaccine, guaranteeing the shelf life for at least three years and meeting "B" standards for antimicrobial effectiveness. The formula developed in this study can contribute toward combating cervical cancer in LMICs.

Methanol and water extracts of the leaves obtained from Vitex negundo plant have been applied on to the textile materials and its antimicrobial effectiveness is assessed against Gram negative and Gram positive bacteria. Extracts of Vitex negundo leaves show antimicrobial efficacy even after multiple washes of the samples and, against perspirations of both acidic and alkaline pH values without any significant increase in the fabric stiffness. Samples treated by exhaustion method exhibit the bactericidal effect while microcapsules treated samples exhibit the bacteriostat effect. The extracts of leaves can potentially be used for controlling the proliferation of microbes and for finishing of fabrics for antimicrobial effectiveness. [ABSTRACT FROM AUTHOR]

Colonization of denture soft lining materials by fungi and denture plaque leads to infections of mucosa. Microorganisms such as Candida albicans colonize not only the surface of the soft liners, but they also penetrate inside those materials. Therefore the use of common disinfectants, e.g., surface active cleaners, is not a perfect solution for keeping a proper hygiene of soft linings. Modifying soft lining by silver nanoparticles (AgNP) seems to be a right way to overcome those problems. The procedure of modifying two-component silicone material by silver nanoparticles (AgNP) is presented in the article. The solubility tests for both material components have been carried out in the first stage of examinations. On the basis of test results, a solvent has been selected, being a dispersion medium for AgNPs and both soft liner components. The effective method for evaporating a solvent from the composition has been developed. Material components with various AgNP concentrations (10, 20, 40, 80, 120 and 200 ppm) have been obtained. Cured samples of the composites have been examined by SEM to confirm the effectiveness of the procedure. [ABSTRACT FROM AUTHOR]

The antimicrobial effectiveness or preservative effectiveness test is described in the tripartite compendia for sterile parenteral multi-dose formulated products. The execution of the test is essentially harmonized with respect to inoculum preparation and test execution but not the acceptance criteria. This article describes how a single test can be performed that procedurally satisfies all of the compendia and their acceptance criteria. [ABSTRACT FROM AUTHOR]

Int J Dent Hygiene , 2011; 60-67 DOI: 10.1111/j.1601-5037.2009.00437.x Hofer D, Meier A, Sener B, Guggenheim B, Attin T, Schmidlin PR. Biofilm reduction and staining potential of a 0.05% chlorhexidine rinse containing essential oils. To assess the biofilm reduction and discolouration potential of a new 0.05% chlorhexidine (CHX) digluconate solution, containing additional essential oil and alcohol components, compared with that of standard control CHX solutions (0.05% and 0.2% CHX). The potential to reduce total viable counts of growing mixed microbial populations was examined using the Zurich biofilm model. Biofilms were created on sterile pellicle-coated hydroxyapatite discs and exposed to test substances at different time points. After 64.5 h, mean colony-forming units and SDs were determined. Colour change measurements using light reflection analysis were carried out on saliva preconditioned bovine dentin and enamel samples, as well as on composite and glass ceramic restorative materials, after successive immersions in a standardized tea brew and the CHX solutions. The test solution was able to reduce biofilm formation by 3 log steps compared with a negative (water) control. This was significantly less effective than the standard control CHX solutions, which reduced viable counts by 6 log steps. Both the test and control solutions exhibited staining on all surfaces. Staining was most pronounced on dentin, followed by enamel and to a significantly lesser degree on the restorative materials. Furthermore, the staining caused by the test solution on these restorative materials was generally lower than that caused by the control solutions. The test solution exhibited an antimicrobial activity. The composition, however, seems to hamper its effectiveness. Accordingly, it produced statistically significant, although by trend less, staining on restorative materials. [ABSTRACT FROM AUTHOR]

This study examines the effectiveness in the laboratory of Plains Indian plant remedies traditionally used as topical antiseptics to prevent or treat infections of the skin. Thirty different medicinal plants found growing in southeast Wyoming used by Plains Indians as antiseptics were tested Extracts of each plant's fluids were filter sterilized and tested against nine different bacteria and one yeast. Fifty percent of the native plants isolated from southeast Wyoming and historically used by Plains Indians as topical antiseptics did exhibit some antimicrobial properties in vitro. [ABSTRACT FROM AUTHOR]

The influence of water vapor plasma on chemical, morphological and mechanical properties of bleached and mercerized cotton fabric was studied. Reactive exhaust dyeing was used for loading of nano silver. Inductively coupled plasma mass spectroscopy results show that plasma treatment enhanced nano silver adhesion to the fabric, which also contributed to antimicrobial effectiveness to Pseudomonas aeruginosa and Escherichia coli. Surface changes of plasma treated cotton were observed with scanning electron microscopy. X-ray photoelectron spectroscopy results show the decrease of C-C bonds in favor of C-O, O-C-O, C=O, and O=C-O bonds and higher O/C atomic ratio in plasma treated fibers. Mechanical properties of cotton yarn after plasma treatment remained unchanged. [ABSTRACT FROM AUTHOR]

Copyright of Tekstilec is the property of University of Ljubljana, Faculty of Natural Sciences & Engineering, Department of Textiles and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

(1) Background: Acne is a widespread skin disease, especially among adolescents. Following the COVID-19 pandemic and the use of masks, the problem has been affecting a greater number of people, and the attention of the skin care beauty routine cosmetics has been focused on the "Maskne", caused by the sebum excretion rate (SER) that stimulates microbial proliferation. (2) Methods: the present study was focused on the rheological characterization and quality assurance of the preservative system of an anti-acne serum. The biological effectiveness (cytotoxicity—skin and eye irritation—antimicrobial, biofilm eradication and anti-inflammatory activity) was evaluated in a monolayer cell line of keratinocytes (HaCaT) and on 3D models (reconstructed human epidermis, RHE and human reconstructed corneal epithelium, HCE). The Cutibacterium acnes, as the most relevant acne-inducing bacterium, is chosen as a pro-inflammatory stimulus and to evaluate the antimicrobial activity of the serum. (3) Results and Conclusions: Rheology allows to simulate serum behavior at rest, extrusion and application, so the serum could be defined as having a solid-like behavior and being pseudoplastic. The preservative system is in compliance with the criteria of the reference standard. Biological effectiveness evaluation shows non-cytotoxic and irritant behavior with a good antimicrobial and anti-inflammatory activity of the formulation, supporting the effectiveness of the serum for acne-prone skin treatment. [ABSTRACT FROM AUTHOR]

Data obtained from studies on the antimicrobial properties of bonding agents are the subject of controversy, probably because of methodological differences. This study compared two commonly used in vitro methods, the disc agar diffusion test and the well agar diffusion test. Agar plates were seeded with Streptococcus sobrinus , Lactobacillus gasseri , or Actinomyces naeslundii . For the well diffusion test, wells cut out of the agar were filled with the test material, and for the disc method, discs impregnated with the test material were applied to the agar; the discs and wells were both 9 mm in diameter. After incubation, measurements of the zones of inhibition showed little agreement between the two methods when bonding agents were tested; the mean differences (± s diff ) in the zones of inhibition between the methods were 0.7 ± 3.4 mm (P = 0.40, one sample t -test against zero), 4.9 ± 4.4 mm (P = 0.97), and 0.8 ± 4.3 mm (P = 0.47) for S. sobrinus , L. gasseri , and A. naeslundii, respectively. Mean differences were less contrasting when chlorhexidine and pure components were tested (P < 0.05 for S. sobrinus and L. gasseri ). These results indicate the need for a gold standard method to evaluate the antimicrobial properties of bonding agents. [ABSTRACT FROM AUTHOR]