Search

Abstract A DMA (dynamic mechanical analysis)-like device based on the principle of classical viscoelasticity testing is invented to investigate the in-situ/in-vivo shear-bearing mechanism of plantar soft tissue. Forty-three volunteers were recruited for the shear-strain test in the longitudinal and transverse directions at five anatomical spots on the plantar surface. Several encouraging observations indicated significant variances among different spots and individuals, implying that the outer forefoot surrounding the second, fifth metatarsal head is a more intensive shear-bearing region on the plantar surface compared to the inner forefoot under the first metatarsal head, and drawing the hypothesis of a significant effect of BMI on the shear-bearing property. The speculations agree with our expectations and other previous research. The feasibility and practical value of this novel approach are substantiated, and these intriguing discoveries provide foundational underpinnings for further in-depth investigations.

A DMA (dynamic mechanical analysis)-like device based on the principle of classical viscoelasticity testing is invented to investigate the in-situ/in-vivo shear-bearing mechanism of plantar soft tissue. Forty-three volunteers were recruited for the shear-strain test in the longitudinal and transverse directions at five anatomical spots on the plantar surface. Several encouraging observations indicated significant variances among different spots and individuals, implying that the outer forefoot surrounding the second, fifth metatarsal head is a more intensive shear-bearing region on the plantar surface compared to the inner forefoot under the first metatarsal head, and drawing the hypothesis of a significant effect of BMI on the shear-bearing property. The speculations agree with our expectations and other previous research. The feasibility and practical value of this novel approach are substantiated, and these intriguing discoveries provide foundational underpinnings for further in-depth investigations. [ABSTRACT FROM AUTHOR]

The biomechanical characterization of the tissues provides significant evidence for determining the pathological status and assessing the disease treatment. Incorporating elastography with optical coherence tomography (OCT), optical coherence elastography (OCE) can map the spatial elasticity distribution of biological tissue with high resolution. After the excitation with the external or inherent force, the tissue response of the deformation or vibration is detected by OCT imaging. The elastogram is assessed by stress–strain analysis, vibration amplitude measurements, and quantification of elastic wave velocities. OCE has been used for elasticity measurements in ophthalmology, endoscopy, and oncology, improving the precision of diagnosis and treatment of disease. In this article, we review the OCE methods for biomechanical characterization and summarize current OCE applications in biomedicine. The limitations and future development of OCE are also discussed during its translation to the clinic. [ABSTRACT FROM AUTHOR]

This work consists of analyzing the impact of geometrical features (thickness and curvature) on the estimation of circumferential residual stresses in arteries. For this purpose, a specific sample of lamb abdominal artery is chosen for analysis and, through computational tools based on Python libraries, the stress-free geometry is captured after the ring opening test. Numerical simulations are then used to reconstruct the sample in order to estimate the circumferential residual stresses. Then, four stress-free geometry models are analyzed: an ideal geometry, i.e., constant curvature and thickness; a constant curvature and variable thickness geometry; a variable curvature and constant thickness geometry; and a variable curvature and thickness geometry. The numerical results show that models perform well from a geometric point of view, where the most different feature was the closed outer perimeter that differs about 14% from the closed real sample. As far as residual stress is concerned, differences up to 198% were found in more realistic models taking a constant curvature and thickness model as reference. Thus, the analysis of a realistic geometry with highly variable curvature and thickness can introduce, compared to an idealized geometry, significant differences in the estimation of residual stresses. This could indicate that the characterization of arterial residual stresses is not sufficient when considering only the opening angle and, therefore, it is also necessary to incorporate more geometrical variables.

Human Fascia Lata (FL) is a connective tissue with a multilayered organization also known as aponeurotic fascia. FL biomechanics is influenced by its composite structure formed by fibrous layers (usually two) separated by loose connective tissue. In each layer, most of the collagen fibers run parallel in a distinct direction (with an interlayer angle that usually ranges from 75–80°), mirroring the fascia's ability to adapt and withstand specific tensile loads. Although FL is a key structure in several musculoskeletal dysfunctions and in tissue engineering, literature still lacks the evidence that proves tissue anisotropy according to predominant collagen fiber directions. For this purpose, this work aims to analyze the biomechanical properties of ex-vivo FL (collected from fresh-frozen human donors) by performing uniaxial tensile tests in order to highlight any differences with respect to loading directions. The experimental outcomes showed a strong anisotropic behavior in accordance with principal collagen fibers directions, which characterize the composite structure. These findings have been implemented to propose a first constitutive model able to mimic the intra- and interlayer interactions. Both approaches could potentially support surgeons in daily practices (such as graft preparation and placement), engineers during in silico simulation, and physiotherapists during musculoskeletal rehabilitation, to customize a medical intervention based on each specific patient and clinical condition. [ABSTRACT FROM AUTHOR]

The perineum is a layered soft tissue structure with mechanical properties that maintain the integrity of the pelvic floor. During childbirth, the perineum undergoes significant deformation that often results in tears of various degrees of severity. To better understand the mechanisms underlying perineal tears, it is crucial to consider the mechanical properties of the different tissues that make up the perineum. Unfortunately, there is a lack of data on the mechanical properties of the perineum in the literature. The objective of this study is to partly fill these gaps. Hence sow perineums were dissected and the five perineal tissues involved in tears were characterized by uniaxial tension tests: Skin, Vagina, External Anal Sphincter, Internal Anal Sphincter and Anal Mucosa. From our knowledge, this study is the first to investigate all these tissues and to design a testing protocol to characterize their material properties. Six material models were used to fit the experimental data and the correlation between experimental and predicted data was evaluated for comparison. As a result, even if the tissues are of different nature, the best correlation was obtained with the Yeoh and Martins material models for all tissues. Moreover, these preliminary results show the difference in stiffness between the tissues which indicates that they might have different roles in the structure. These obtained results will serve as a basis to design an improved experimental protocol for a more robust structural model of the porcine perineum that can be used for the human perineum to predict perineal tears. [ABSTRACT FROM AUTHOR]

In this study, shear relaxation properties of the porcine temporomandibular joint (TMJ) disc are investigated. Previous studies have shown that, in fatigue failure and damage of cartilage and fibrocartilage, shear loads could be one of the biggest contributors to the failure. The aim of the present study is to develop an evaluation method to study shear properties of the disc and to do a mathematical characterization of it. For the experiments, twelve porcine discs were used. Each disc was dissected from the TMJ and, then, static strain control tests were carried out to obtain the shear relaxation modulus for the central region of the discs. From the results, it was found that the disc presents a viscoelastic behavior under shear loads. Relaxation modulus decreased with time. Shear relaxation was 10% of the instantaneous stress, which implies that the viscous properties of the disc cannot be neglected. The present results lead to a better understanding of the discs mechanical behavior under realistic TMJ working conditions. [ABSTRACT FROM AUTHOR]

The "fascial system" has been defined as a fascial network involved in functional aspects such as force transmission. The fascial system comprises the superficial and deep fasciae which are connected through skin ligaments, also known as retinacula, providing a continuity from the skin to the muscular plane (See Figure). Indeed, superficial and deep fascia roles in clinical disorders have been shown to reflect their structures. Specifically, the superficial fascia has been described anatomically as an irregular multilamellar structure of interconnected substrates with islets of fat cells. Meanwhile, for example, the deep aponeurotic fascia consists of multilayered structures of dense and loose connective tissues, where collagen fibers follow specific directions. Since the properties of superficial and deep fasciae mimic their structural organization, the biomechanical characterization of these tissues is key to understanding how they influence each other. Despite the clinical impact of these arguments, to date, the literature is still poor in data comparing different substrates of the fascial system through mechanical tests. Therefore, the aim of this work is to investigate this open topic by presenting the biomechanical properties of both superficial and deep fasciae. The study highlights how these tissues have different biomechanical properties in relation to their specific structures and functions. These results have a direct impact in the medical field such as in the surgical treatment of soft tissue repair or reconstruction, as well as in rehabilitation intervention (e.g., manual treatment). [ABSTRACT FROM AUTHOR]

Abstract Fetal growth restriction (FGR) is a perinatal condition associated with a low birth weight that results mainly from maternal and placental constrains. Newborns affected by this condition are more likely to develop in the long term cardiovascular diseases whose origins would be in an altered vascular structure and function defined during fetal development. Thus, this study presents the modeling and numerical simulation of systemic vessels from guinea pig fetuses affected by FGR. We aimed to characterize the biomechanical properties of the arterial wall of FGR-derived the aorta, carotid, and femoral arteries by performing ring tensile and ring opening tests and, based on these data, to simulate the biomechanical behavior of FGR vessels under physiological conditions. The material parameters were first obtained from the experimental data of the ring tensile test. Then, the residual stresses were determined from the ring opening test and taken as initial stresses in the simulation of the ring tensile test. These two coupled steps are iteratively considered in a nonlinear least-squares algorithm to obtain the final material parameters. Then, the stress distribution changes along the arterial wall under physiological pressure were quantified using the adjusted material parameters. Overall, the obtained results provide a realistic approximation of the residual stresses and the changes in the mechanical behavior under physiological conditions. [ABSTRACT FROM AUTHOR]

A thorough understanding of the well-functioning, native aortic root is pivotal in an era, where valve sparing surgical techniques are developed and used with increasing frequency. The objective of this study was to characterize the local structural stiffness of the native aortic root, to create a baseline for understanding how different surgical interventions affect the dynamics of the aortic root. In this acute porcine study (N = 10), two dedicated force transducers were implanted to quantify the forces acting on both the annular plane and on the sinotubular junction (STJ). To assess the changes in geometry, eleven sonomicrometry crystals were implanted within the aortic root. The combination of force and length measurements yields the radial structural stiffness for each segment of the aortic root. The least compliant segment at the annular plane was the right-left interleaflet triangle with a stiffness modulus of 1.1 N mm −1 (SD0.4). At the sinotubular junction the same segment (right-left) was most compliant, compared with the two other segments, however not statistically significant different. The elastic energy storage was derived from the aortic root pressure volume relationship; the mean elastic energy storage was 826 µJ (SD529). In conclusion, the aortic root has been characterized in terms of both segmental forces, segmental change in length and elastic energy storage. This study is the first to assess the radial structural stiffness of different segments of the aortic root. The presented data is reference for further studies regarding the impact of surgical interventions on the aortic root. [ABSTRACT FROM AUTHOR]

Osteoarthritis (OA) is a common joint disorder found mostly in elderly people. The role of mechanical behavior in the progression of OA is complex and remains unclear. The stress-relaxation behavior of human articular cartilage in clinically defined osteoarthritic stages may have importance in diagnosis and prognosis of OA. In this study we investigated differences in the biomechanical responses among human cartilage of ICRS grades I, II and III using polymer dynamics theory. We collected 24 explants of human articular cartilage (eight each of ICRS grade I, II and III) and acquired stress-relaxation data applying a continuous load on the articular surface of each cartilage explant for 1180 s. We observed a significant decrease in Young’s modulus, stress-relaxation time, and stretching exponent in advanced stages of OA (ICRS grade III). The stretch exponential model speculated that significant loss in hyaluronic acid polymer might be the reason for the loss of proteoglycan in advanced OA. This work encourages further biomechanical modelling of osteoarthritic cartilage utilizing these data as input parameters to enhance the fidelity of computational models aimed at revealing how mechanical behaviors play a role in pathogenesis of OA. [ABSTRACT FROM AUTHOR]

Atraumatic femoral head necrosis is a rare pathological change of the femoral head. It is characterized by local necrosis of the cancellous bone as a result of reduced blood supply to the bone. Even today it remains unclear how to assess the hardness of the necrosis, whether it is soft tissue that is easily removed, or hard tissue that is difficult to resect. Femoral heads with primary coxarthrosis were selected as a comparison group. For this purpose, 49 femoral heads obtained during total hip arthroplasty surgery with either condition (23 femoral head necrosis, 26 coxarthrosis) were transferred to the testing laboratory in fresh condition. Cylindrical specimens were obtained using a tenon cutter along the main trabecular load direction in the subchondral region of the femoral head. Additionally, thin bone slices were extracted proximal and distal to the specimens for density measurements. Brass plates were glued to the circular surfaces of the specimens. After curing of the adhesive, the specimens were mounted in the testing machine and destructive uniaxial compression tests were conducted. The recorded mean compressive strengths and elastic moduli were almost identical for both groups, but the necrosis group showed significantly higher data scattering and range regarding the elastic modulus. The mean density of the coxarthrosis specimens was significantly higher than that of the necrotic specimens. The mechanical properties of cancellous bone vary considerably in the presence of femoral head necrosis. The existence of hard necrosis implies a potential challenge regarding the clinical resection of these tissues. • Femoral head necrosis is very heterogeneous in appearance and mechanical properties. • Presence of sclerotic tissue has an increasing influence on the elastic modulus. • Mean density differs significantly between coxarthrosis and femoral head necrosis. [ABSTRACT FROM AUTHOR]

In this study, the dynamic and static compressive properties of the whole porcine temporomandibular joint (TMJ) disc were investigated. The aim of the study was to develop a new simple method for the evaluation of joint viscoelasticity, enabling examination of the load-bearing capacity and joint flexibility of the entire disc. For the experiments, a novel testing fixture that reproduces the condylar and fossa surfaces of the TMJ was developed to replicate TMJ disc geometry. Ten porcine discs were used in the experiments. Each disc was dissected from the TMJ and sinusoidal compressive strain was applied to obtain the storage and loss moduli. Static strain control tests were carried out to obtain the relaxation modulus. The result of static and dynamic tests indicated that the whole disc presented viscoelastic behavior under compression. Storage and loss moduli increased with frequency and the relaxation modulus decreased over time. The loss tangent showed less frequency dependence, with values ranging from 0.2 to 0.3, suggesting that the viscous properties of the disc cannot be neglected. These results provide a better understanding of whole disc mechanical compression behavior under realistic TMJ working conditions. [ABSTRACT FROM AUTHOR]

This work presents a methodology for the in vivo characterization of the complete biomechanical behavior of the human cornea of each patient. Specifically, the elastic constants of a hyperelastic, secondorder Ogden model were estimated for 24 corneas corresponding to 12 patients. The inite element method was applied to simulate the deformation of human corneas due to non-contact tonometry, and an iterative search controlled by a genetic heuristic was used to estimate the elastic parameters that most closely approximates the simulated deformation to the real one. The results from a synthetic experiment showed that these parameters can be estimated with an error of about 5%. The results of 24 in vivo corneas showed an overlap of about 90% between simulation and real deformed cornea and a modified Hausdorff distance of 25 μm, which indicates the great accuracy of the proposed methodology. [ABSTRACT FROM AUTHOR]

Atomic force microscopy (AFM) is not only a high-resolution imaging technique but also a sensitive tool able to study biomechanical properties of bio-samples (biomolecules, cells) in native conditions-i.e., in buffered solutions (culturing media) and stable temperature (mostly 37 °C). Micromechanical transducers (cantilevers) are often used to map surface stiffness distribution, adhesion forces, and viscoelastic parameters of living cells; however, they can also be used to monitor time course of cardiomyocytes contraction dynamics (e.g. beating rate, relaxation time), together with other biomechanical properties. Here we describe the construction of an AFM-based biosensor setup designed to study the biomechanical properties of cardiomyocyte clusters, through the use of standard uncoated silicon nitride cantilevers. Force-time curves (mechanocardiograms, MCG) are recorded continuously in real time and in the presence of cardiomyocyte-contraction affecting drugs (e.g., isoproterenol, metoprolol) in the medium, under physiological conditions. The average value of contraction force and the beat rate, as basic biomechanical parameters, represent pharmacological indicators of different phenotype features. Robustness, low computational requirements, and optimal spatial sensitivity (detection limit 200 pN, respectively 20 nm displacement) are the main advantages of the presented method.

Preclinical trials are essential to the development of scientific technologies. Remarkable molecular and cellular research has been done using small animal models. However, significant differences exist regarding the articular behavior between these models and humans. Thus, large animal models may be more appropriate to perform trials involving the temporomandibular joint (TMJ). The aim of this work was to make a morphological (anatomic dissection and white light 3D scanning system), histological (TMJ in bloc was removed for histologic analysis) and biomechanical characterization (tension and compression tests) of sheep TMJ comparing the obtained results with human data. Results showed that sheep processus condylaris and fossa mandibularis are anatomically similar to the same human structures. TMJ disc has an elliptical perimeter, thinner in the center than in periphery. Peripheral area acts as a ring structure supporting the central zone. The disc cells display both fibroblast and chondrocyte-like morphology. Marginal area is formed by loose connective tissue, with some chondrocyte-like cells and collagen fibers in diverse orientations. Discs obtained a tensile modulus of 3.97±0.73MPa and 9.39±1.67MPa, for anteroposterior and mediolateral assessment. The TMJ discs presented a compressive modulus (E) of 446.41±5.16MPa and their maximum stress value (σmax) was 18.87±1.33MPa. Obtained results suggest that these animals should be considered as a prime model for TMJ research and procedural training. Further investigations in the field of oromaxillofacial surgery involving TMJ should consider sheep as a good animal model due to its resemblance of the same joint in humans., (Copyright © 2016 Elsevier Masson SAS. All rights reserved.)