Search

The intensive variables, geochemical, mineralogical, and petrogenetic constraints of the Iberian peraluminous rare metal granites (RMGs), many of them unknown, are presented. The mineral chemistry of ore and gangue minerals, whole rock analyses, geothermobarometry, melt water and phosphorus contents, mass balance, and Rayleigh modeling were performed to achieve these objectives. These procedures allow us to distinguish two main contrasting granitic types: Nb-Ta-rich and Nb-Ta-poor granites. The former have lower crystallization temperatures, higher water contents, and lower emplacement pressures than Nb-Ta-poor granites. Nb-Ta-rich granites also have higher fluoride contents, strong fractionation into geochemical twins, higher Na contents, and different evolutionary trends. At the deposit scale, the fractional crystallization of micas properly explains the variation in the Ta/Nb ratio in both Nb-Ta-poor and Nb-Ta-rich RMGs, although in higher-grade granites, the variation is not as clear due to the action of fluids. Fluid phase separation processes especially occurred in the Nb-Ta rich granites, thus transporting halogens and metals that increased the grades in the top and sometimes in the core of granites. Gas-driven filter pressing processes facilitated the migration of fluid and melt near solidus melt in Nb-Ta-rich granites. The geochemical signature of the Iberian rare metal granites mainly follows the trends of two-mica granites and P-rich cordierite granites, but also of granodiorites. [ABSTRACT FROM AUTHOR]

In this paper we present textural and compositional data for columbite group minerals (CGMs) and associated Nb-Ta-Sn oxides from lithium-beryllium-tantalum pegmatite deposits of the Kolmozero–Voronja belt, NW Russia, with the aim of deciphering these characteristics for minerals from deposits with different mineral signatures and lithium ore grade. Minerals from four deposits, including two of world-class (Kolmozero and Polmostundra), are examined. The main controlling factors for CGM compositional ranges are the diversity and rate of magmatic fractionation, hydrothermal overprint and mineral paragenesis, following the specific geochemical signature of the different pegmatite deposits. CGM from Kolmozero include several mineral species (columbite-(Fe), columbite-(Mn), tantalite-(Fe), and tantalite-(Mn)), showing large compositional variations, mainly controlled by Nb-Ta fractionation (Ta/(Ta + Nb) = 0.16–0.70; Mn/(Mn + Fe) = 0.45–0.63). Textural patterns are various (oscillatory, homogeneous, and patchy); spongy domains and overgrowing Ta-rich rims are also observed somewhere. This indicates the involvement of numerous magmatic and hydrothermal processes. The Polmostundra CGMs are represented by columbite-(Fe) with Ta/(Ta + Nb), ranging from 0.05 to 0.39; some crystals are homogenous, and others present normal, oscillatory, mottled and reverse-zoning patterns. The Okhmylk CGMs are irregular normal, patchy and homogeneous columbite-(Fe) and columbite-(Mn), with Ta/(Ta + Nb) = 0.09–0.24 and Mn/(Mn + Fe) = 0.29–0.92, indicating the suppressed magmatic fractionation and iron drop due to precipitation of Fe minerals. Columbite-(Fe) and columbite-(Mn) from the Be-Ta Shongui deposit are less evolved, with Ta/(Ta + Nb) = 0.07–0.23 and Mn/(Mn + Fe) = 0.31–0.55. The minerals are characterized by progressive normal, oscillatory, homogeneous and irregular reverse patterns. Associated pyrochlore minerals occur both as early magmatic (Kolmozero) and late hydrothermal (Polmostundra, Okhmylk). Cassiterite is found only in the Okhmylk dykes, and is apparently of hydrothermal origin. CGM from Li pegmatites have impurities of Ti (0.01–0.05 apfu) and W (up to 0.02 apfu), whereas CGM from Be pegmatites contains elevated Ti (up to 0.09 apfu). The mineral system analysis presented here is relevant for exploration. [ABSTRACT FROM AUTHOR]

Rare-element granites and pegmatites represent important sources of raw materials for “clean, green and high technologies”, such as lithium and tantalum, for example. However, mechanisms of rare-element granites and pegmatite’s origin are still far from being fully understood. Several rare-element pegmatite fields and a rare-element granite are known in the Variscan realms located in Iberia (Spain and Portugal), enhancing the interest of this area for studying the formation of these extremely fractionated melts. In situ U-Pb dating by LA-SF-ICP-MS of columbite-group minerals from rare-element granites and pegmatites of the Iberian Variscan belt provides new constraints on the generation of rare-element melts. Three events have been recognized: (i) Emplacement of the Argemela rare-element granite, in the Central Iberian Zone (CIZ), with an age of 326 ± 3 Ma; (ii) Emplacement of rare-element pegmatites from the Galicia-Trás-os-Montes Zone (GTOMZ), at an average age of 310 ± 5 Ma; (iii) Emplacement of rare-element pegmatites in the CIZ and in the southern GTOMZ at about 301 ± 3 Ma. These two last events are coeval with the two peaks of ages for the late orogenic magmatism at ca. 308 Ma and 299 Ma, and all dated rare-element pegmatites clearly emplaced during the late-orogenic evolution of the Variscan belt. Contemporaneous fields of rare-element pegmatites are arranged in belts following those formed by similar granitoid suites. Pegmatite fields from both the GTOMZ and the CIZ reveal a southward propagation of ages of emplacement, which matches the observed propagation of deformation, metamorphism and magmatism in the two different geotectonic zones. Existence of three successive rare-element events in the Iberian Massif argues against the involvement of lower crustal HP-HT metamorphism in the generation of rare-element melts. Possible sources of rare-element-enriched melts are more likely located in the middle to upper crust, as are the major components of granitic magmatism. Analyses of U and Pb isotopes from columbite-group minerals are very robust and reproducible, making them good candidates for dating ore deposits related to peraluminous magmatism as well as REE- and Nb-bearing deposits.

The article presents the results of optical, electron microscopic and electron microprobe studies of columbite group minerals, collected during heavy mineral concentrate sampling of alluvial deposits in the Mayoko region (Republic of the Congo). The aim of the study is revealing tantalum niobates ore body in this region. We found that these minerals in loose deposits are represented by two grain-size groups: less than 1.6 mm (fine fraction) and 1.6-15 mm (coarse fraction). The grains of both fractions belong mainly to columbite-(Fe), less often to columbite-(Mn), tantalite-(Mn) and tantalite-(Fe), contain impurities of Sc, Ti, and W. The crystals have micro-scaled zoning (zones varies slightly in the Ta/Nb ratio values) and contains a lot of mineral inclusions and veins represented by zircon, pyrochlore supergroup minerals and others. Columbite-(Fe) and columbite-(Mn) are characterized by an increased content of Ta2O5 up to the transition to tantalite-(Fe) and tantalite-(Mn). This allows us to exclude the formation of subalkaline rare-metal granites, their metasomatites (albitites and greisenes) and carbonatites, from the list of possible columbite ore rocks source in the Mayoko district. Thus, beryl type and complex spodumene subtype rare-element pegmatites of the mixed petrogenetic family LCT-NYF (according to P.Černý) should be considered as a probable root source. The results of the research should be taken into account when developing the methodology for prospecting in this area.

The Sn-Ta-Nb Penouta granite is a highly evolved rare-metal post-kinematic leucogranite located in north-western Spain, which was intermittently mined from Roman times until 1985, when falling metal prices led to the closure of most mines in the country. Mineralization consists mainly of cassiterite (cassiterite I) and columbite group minerals (CGM) disseminated in the leucogranite, that increase in abundance and crystal size towards the upper part of the granitic cupola, especially in banded pegmatite-like dikes. Upwards quartz veins and greisen zones associated with the wall rock (mainly augen gneisses) were developed, containing coarse-grained cassiterite (cassiterite II). In contrast to nearly homogenous cassiterite chemistry, CGM may show complex compositional zonation patterns in relation with compositional variations of the leucogranite. Taking into account the mineral chemistry and textural features of CGM, two main groups were distinguished: (i) the first one (Group I) follows a general main trend from columbite-Fe to columbite-Mn, and finally to tantalite-Mn, which is in accordance with the evolution of the magma observed from the less to the more evolved zones of the leucogranite and from bottom to top of the body, and responds to common fractionation patterns of decreasing Nb/Ta ratios in the melt; and (ii) a second group (Group II), with intermediate values of Mn/(Mn + Fe) and Ta/(Ta + Nb) due to local supersaturation effects of the melt during crystallization, resulting in complex oscillatory zoned CGM crystals. Textural and chemical features of cassiterite and CGM support the magmatic origin for both minerals, although cassiterite crystallized later in the sequence in both generations. Mineral chemistry evolution of CGM is in good agreement with a greater solubility of tantalite in the melt at the upper levels, where, besides, the fluorine contents of apatite and muscovite were increased and the onset of fluorite crystallization occurred. So, the fluorine enrichment in the upper levels seems likely to be an important component to explain the mineral chemistry of the Penouta granite, although the same mineral chemistry scheme could also be explained in terms of white mica fractionation upwards. Furthermore, the absence of typical textures originated by fluids in the CGM as well as the lack of these minerals in the quartz veins point to a low influence of the hydrothermal fluids in dissolution and recrystallization processes of the primary oxides. [ABSTRACT FROM AUTHOR]

• Sveconorwegian pegmatites form two age groups: (1) 1100–1030 Ma and (2) 930–890 Ma. • Group 1 formed in transpressional and Group 2 in extensional tectonic regimes. • Sveconorwegian pegmatites occur mainly in amphibolite due to its rheological behavior. • The majority of Sveconorwegian pegmatites is derived from anatectic melting. Most pegmatites of southern Norway seem to be derived from anatectic melting of metamorphic rocks during the Sveconorwegian orogeny rather than to be highly evolved residual melts derived from granites. We test this hypothesis by providing new age data for thirteen pegmatites and one granite. Based on these new age data, we distinguish two age groups of Sveconorwegian pegmatites (>1,000 m3 in size); Group 1: 1100–1030 Ma and Group 2: 930–890 Ma. All pegmatites except those from the Østfold area crystallized significantly earlier or later than adjacent granites. The Tørdal granite, yielding an age of 946 ± 4 Ma, is about 40 Ma older than the adjacent pegmatites. Field evidence and the age difference between pegmatites and granites supports an anatectic origin for these pegmatites. Sources of these pegmatite melts are biotite- and biotite-amphibole gneisses and amphibolites. Group 1 pegmatites formed in transpressional regimes after peak metamorphism, whereas Group 2 pegmatites formed in an extensional regime and the required heat for partial melting was provided by mafic magma underplating. Differences in the rheological behavior of amphibolite and granitic gneiss during extensional tectonics are the major reason why Group 2 pegmatites occur preferentially in large amphibolite bodies. Under mid-crustal conditions, amphibolite reacts brittle to semi-brittle forming open structures in an extensional tectonic regime where partial melts drained into. Granitic gneisses react in a ductile manner and do not have the ability to drain partial melt. Pegmatite formation in the Grenville Province, i.e., the Laurentian part of the Grenville–Sveconorwegian orogenic belt, formed between ca. 1090 and 980 Ma peaking at 1010 to 980 Ma. Thus, the Grenville peak postdates the Sveconorwegian Group 1 peak by about 30 Ma. These pegmatites formed in similar orogenic settings, implying that similar tectono-metamorphic developments along the Grenville–Sveconorwegian orogenic belt were diachronous. We conclude that local anatexis is the major pegmatite-melt forming process in the Sveconorwegian as well as Grenville orogen. Local anatexis also may be important in other pegmatite provinces. [ABSTRACT FROM AUTHOR]