Search

Brewers' spent grain (BSG) is the primary by-product of beer production, and its potential use in food products is largely dependent on its processing, given its moisture content of up to 80%. This study aimed to evaluate the effects of physical separation with ultrasound application on the color, total phenolic content (TPC), antioxidant activity, proximate composition, total dietary fibers, and particle size distribution of BSG powders. Wet BSG (W) was subjected to two processes: one without ultrasound (A) and one with ultrasound (B). Both processes included pressing, convective air-drying, sieving, fraction separation (A1 and B1 as coarse with particles ≥ 2.36 mm; A2 and B2 as fine with particles < 2.36 mm), and milling. The total color difference compared to W increased through both processes, ranging from 1.1 (B1 vs. A1) to 5.7 (B1 vs. A2). There was no significant difference in TPC, but process B powders, particularly B2, showed lower antioxidant activity against ABTS•+, likely due to the release of antioxidant compounds into the liquid fraction during pressing after ultrasound treatment. Nonetheless, process B powders exhibited a higher content of soluble dietary fibers. In conclusion, ultrasound application shows potential for further extraction of soluble fibers. However, process A might be more practical for industrial and craft brewers. Further studies on the use of the resulting BSG powders as food ingredients are recommended. [ABSTRACT FROM AUTHOR]

Brewers’ spent grain (BSG) is the primary by-product of beer production, and its potential use in food products is largely dependent on its processing, given its moisture content of up to 80%. This study aimed to evaluate the effects of physical separation with ultrasound application on the color, total phenolic content (TPC), antioxidant activity, proximate composition, total dietary fibers, and particle size distribution of BSG powders. Wet BSG (W) was subjected to two processes: one without ultrasound (A) and one with ultrasound (B). Both processes included pressing, convective air-drying, sieving, fraction separation (A1 and B1 as coarse with particles ≥ 2.36 mm; A2 and B2 as fine with particles < 2.36 mm), and milling. The total color difference compared to W increased through both processes, ranging from 1.1 (B1 vs. A1) to 5.7 (B1 vs. A2). There was no significant difference in TPC, but process B powders, particularly B2, showed lower antioxidant activity against ABTS•+, likely due to the release of antioxidant compounds into the liquid fraction during pressing after ultrasound treatment. Nonetheless, process B powders exhibited a higher content of soluble dietary fibers. In conclusion, ultrasound application shows potential for further extraction of soluble fibers. However, process A might be more practical for industrial and craft brewers. Further studies on the use of the resulting BSG powders as food ingredients are recommended.

Copyright of Harran Journal of Agricultural & Food Science is the property of Harran University, Faculty of Agriculture and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In this study, the relationship between moisture diffusivity in convective air-drying and cellular structure through blanching and freezing pretreatment and quality attributes of dried pumpkin slices were evaluated to obtain necessary information for designing appropriate drying and pretreatment conditions. The results suggest that the loosely bound structure of cell walls due to blanching and pores in the tissue formed by ice crystals during freezing increased moisture diffusivity. In addition, the functional and structural damage of cell membranes by the pretreatments, shown by the electrical impedance analysis, is likely involved in moisture diffusivity during drying. In particular, the sample pretreated by both blanching and freezing showed significantly higher values of moisture diffusivity compared to other samples. With regards to quality attributes, a decrease in color lightness due to starch gelatinization during blanching dramatically affected the color characteristics of the dried product. Starch gelatinization due to blanching and the formation of pores during freezing significantly influenced the structure of the samples after drying, which affected the rehydration rates and mechanical properties. [ABSTRACT FROM AUTHOR]

The recent COVID-19 pandemic resulted in major postharvest losses because most fresh produce could not be sold. Drying is an important thermal-based food preservation method which could have prolonged the shelf-life of these produce, but most drying technologies are costly, and cannot be afforded by small-time farmers. From this context, we were interested in evaluating the drying of Moringa oleifera leaves (MOL) using a low-cost self-built prototype convective-air dryer (CAD), alongside conventional drying methods for its antioxidant properties, microbial load and phytoconstituents. Results showed total polyphenol content was the highest (p < 0.05) in our CAD samples, and it retained among the highest total flavonoid content, total antioxidant capacity, total alkaloid content and DPPH radical scavenging activity. Furthermore, methanolic CAD extract presented lower coliform and yeast and mold count than the aqueous CAD extract. We also briefly explored MOL as a sanitizer where the microbial load of the methanolic extract was comparable (p > 0.05) with several commercial non-alcoholic sanitizers, indicating its commercialization potential as a bio-friendly sanitizer. Finally, using GC–MS, we are the first to report (best of our knowledge) on the presence of caprolactam, an important bio-medical field compound, in the CAD sample's aqueous extract. [ABSTRACT FROM AUTHOR]

In this study, drying kinetics of kiwifruit are investigated experimentally and theoretically under varying drying conditions. Experiments are conducted using air temperatures at 35, 45, 55 and 65 °C, mean velocities at 0.3, 0.6 and 0.9 m s-1 and, relative humidity values at 40%, 55%, 70% and 85%. Initially, sorption isotherms of the dried kiwifruit slices are determined for different temperatures and equilibrium relative humidity values. The values of the moisture diffusivity, Deff are obtained from the Fick's diffusion model. The effects of the governing drying parameters on the vitamin C content as well as on the total drying time are determined. The experimental moisture data were fitted to some models available in the literature, mainly the Henderson and Pabis model, the Lewis model and the two-term exponential model and, a good agreement was observed. In addition, it is disclosed that increasing drying air temperature causes more loss in vitamin C in the dried fruits while degradation of vitamin C is reduced with increasing relative humidity of drying air. [ABSTRACT FROM AUTHOR]