Search

Background: The extracellular matrix isolated from adipose tissue, known as acellular adipose matrix (AAM), represents a novel biomaterial. AAM functions as a scaffold that not only supports stem cell proliferation and differentiation but also induces adipogenesis and angiogenesis. This study aims to investigate the volumetric effects and microenvironmental changes associated with injectable AAM in comparison to conventional fat grafting. Methods: AAM was manufactured from fresh human abdominoplasty fat using a mechanically modified method and then transformed into an injectable form. Lipoaspirate was harvested employing the Coleman technique. A weight and volume study was conducted on athymic nude mice by injecting either injectable AAM or lipoaspirate into the scalp (n=6 per group). After eight weeks, graft retention was assessed through weight measurement and volumetric analysis using micro-computed tomography (micro-CT) scanning. Histological analysis was performed using immunofluorescence staining for perilipin and CD31. Results: Injectable AAM exhibited similar weight and volume effects in murine models. Histological analysis revealed comparable inflammatory cell presence with minimal capsule formation when compared to conventional fat grafts. Adipogenesis occurred in both AAM-injected and conventional fat graft models, with no significant difference in the blood vessel area (%) between the two. Conclusions: In summary, injectable AAM demonstrates effectiveness comparable to conventional fat grafting concerning volume effects and tissue regeneration in soft tissue reconstruction. This promising allogeneic injectable holds the potential to serve as a safe and effective "Off-the-Shelf" alternative in both aesthetic and reconstructive clinical practices. No Level Assigned: This journal requires that authors assign a level of evidence to each submission to which Evidence-Based Medicine rankings are applicable. This excludes Review Articles, Book Reviews, and manuscripts that concern Basic Science, Animal Studies, Cadaver Studies, and Experimental Studies. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266. [ABSTRACT FROM AUTHOR]

Adipose tissue is an endocrine organ. It serves many important functions, such as energy storage, hormones secretion, and providing insulation, cushioning and aesthetics to the body etc. Adipose tissue engineering offers a promising treatment for soft tissue defects. Early adipose tissue production and long-term survival are closely associated with angiogenesis. Decellularized matrix has a natural ECM (extracellular matrix) component, good biocompatibility, and low immunogenicity. Therefore, in this study, the injectable composite hydrogels were developed to construct vascularized tissue-engineered adipose by using the pro-angiogenic effects of aortic adventitia extravascular matrix (Adv) or small intestinal submucosa (SIS), and the pro-adipogenic effects of decellularized adipose tissue (DAT). The composite hydrogels were cross-linked by genipin. The adipogenic and angiogenic abilities of composite hydrogels were investigated in vitro , and in a rat dorsal subcutaneous implant model. The results showed that DAT and SIS or Adv 1:1 composite hydrogel promoted the migration and tube formation of endothelial cells. Furthermore, DAT and SIS or Adv 1:1 composite hydrogel enhanced adipogenic differentiation of adipose-derived mesenchymal stem cells (ASCs) through activation of PPARγ and C/EBPα. The in vivo studies further demonstrated that DAT with SIS or Adv in a 1:1 ratio also significantly promoted adipogenesis and angiogenesis. In addition, DAT with SIS or Adv in a 1:1 ratio hydrogel recruited macrophage population with enhanced M2-type macrophage polarization, suggesting a positive effect of inflammatory response on angiogenesis. In conclusion, these data suggest that the composite hydrogels of DAT with SIS or Adv in 1:1 ratio have apparent pro-adiogenic and angiogenic abilities, thus providing a promising cell-free tissue engineering biomaterial with broad clinical applications. Decellularized adipose tissue (DAT) has emerged as an important biomaterial in adipose tissue regeneration. Early adipose tissue production and long-term survival is tightly related to the angiogenesis. The revascularization of the DAT is a key issue that needs to be solved in adipose regeneration. In this study, the injectable composite hydrogels were developed by using DAT with Adv (aortic adventitia extravascular matrix) or SIS (small intestinal submucosa) in different ratio. We demonstrated that the combination of DAT with SIS or Adv in 1:1 ratio effectively improved the proliferation of adipose stem cells and endothelial cells, and promoted greater adipose regeneration and tissue vascularization as compared to the DAT scaffold. This study provides the potential biomaterial for clinical soft tissue regeneration. [Display omitted] [ABSTRACT FROM AUTHOR]

Dermal white adipocytes are closely associated with skin homeostasis and wound healing. However, it has not been fully investigated whether adipose-derived products improve wound healing. Here, we obtained adipose acellular matrix (AAM) and adipose-derived growth factors (ADGFs) from human adipose tissue and fabricated an ADGF-loaded AAM via surface modification with heparin. The product, HEP-ADGF-AAM, contained an adipose-derived scaffold and released ADGFs in a controlled fashion. To test its efficacy in promoting wound healing, mice with full thickness wound received three different treatments: HEP-ADGF-AAM, AAM and ADM. Control mice received no further treatments. Among these treatments, HEP-ADGF-AAM best improved wound healing. It induced adipogenesis in situ after in vivo implantation and provided an adipogenic microenvironment for wounds by releasing ADGFs. HEP-ADGF-AAM not only induced adipocyte regeneration, but also enhanced fibroblast migration, promoted vessel formation, accelerated wound closure, and enhanced wound epithelialization. Moreover, there was a close interaction between HEP-ADGF-AAM and the wound bed, and collagen was turned over in HEP-ADGF-AAM. These results show that HEP-ADGF-AAM might substantially improve re-epithelialization, angiogenesis, and skin appendage regeneration, and is thus a promising therapeutic biomaterial for skin wound healing.

Full-thickness skin wounds still represent a challenge for clinical treatment. Adipose-derived stem cells (ADSCs) therapy is a promising approach to achieve efficient healing in skin wounds. The excellent cell scaffold can promote proliferation, differentiation and paracrine of ADSCs in wound microenvironment, and is a key factor in ADSCs application. Herein, we first prepared the composite hydrogel with decellularized adipose tissue (DAT) and tremella polysaccharide (TPS), and loaded insulin (INS) into the DAT/TPS composite hydrogel (DAT/TPS-gel) to fabricate an efficient carrier for ADSCs in treating skin wound. Our study showed that INS modified DAT/TPS-gel (INS-DAT/TPS-gel) can promote the proliferation, differentiation and paracrine of ADSCs. INS-DAT/TPS-gel laden with ADSCs (ADSCs/INS-DAT/TPS-gel) effectively facilitated the skin wound healing in SD rats. These findings indicated that INS-DAT/TPS-gel was an effective scaffold for ADSCs transplantation, and ADSCs/INS-DAT/TPS-gel provides a potential strategy for the treatment of skin wounds. • Decellularized Adipose Tissue/Tremella Polysaccharide hydrogel can provide a favorable environment for ADSCs. • Insulin can promote ADSCs to secrete more vascular endothelial growth factors and hepatocyte growth factors. • Insulin-Decellularized Adipose Tissue/Tremella Polysaccharide hydrogel loaded with ADSCs can promote wound healing. [ABSTRACT FROM AUTHOR]

Perianal fistulas (PAFs) are a severe complication of Crohn's disease that significantly impact patient prognosis and quality of life. While stem-cell-based strategies have been widely applied for PAF treatment, their efficacy remains limited. Our study introduces an injectable, temperature-controlled decellularized adipose tissue-alginate hydrogel loaded with dental pulp mesenchymal stem cells (DPMSCs) for in vivo fistula treatment. The experimental group demonstrated higher healing rates compared to surgical and DPMSCs groups, as evidenced by magnetic resonance imaging, multiplex immunohistochemical, and ELISA analyses. KEGG enrichment of differential genes suggested cellular senescence involvement in cell therapy efficacy, further confirmed by β-galactosidase staining and senescence markers (p21 and p53). Collectively, our research provides a novel therapy for PAFs and illuminates underlying mechanisms.

Multiple physical stimuli are expected to produce a synergistic effect to promote bone tissue regeneration. Low-intensity pulsed ultrasound (LIPUS) has been clinically used in bone repair for the mechanical stimulation that it provides. In addition, LIPUS can also excite the biomaterials to generate other physical stimuli such as thermal or electrical stimuli. In this study, a scaffold based on decellularized adipose tissue (DAT) is established by incorporating polydopamine-modified multilayer black phosphorus nanosheets (pDA-mBP@DAT). Their effect on bone repair under LIPUS stimulation and the potential mechanisms are further investigated. This scaffold possesses piezoelectric properties and generates a mild thermogenic stimulus when stimulated by LIPUS. With superior properties, this scaffold is demonstrated to have good cytocompatibility in vitro and in vivo. Simultaneously, LIPUS promotes cell attachment, migration, and osteogenic differentiation in the pDA-mBP@DAT scaffold. Furthermore, the combined use of pDA-mBP@DAT and LIPUS significantly affects the regenerative effect in rat models of critical-sized calvarial defects. The possible mechanisms include promoting osteogenesis and neovascularization and activating the Piezo1. This study presents insight into speeding up bone regeneration by the synergistic combination of LIPUS and pDA-mBP@DAT scaffolds.

Background: Decellularized adipose tissue (DAT) has emerged as a promising tissue-specific regenerative platform for soft tissue augmentation and reconstruction. Hydrogels are a widely used DAT scaffold format for their injectability and porous structure. While unstable structure and poor vascularization limit the adipose tissue regeneration of DAT gels, this yields significant clinical necessity for solutions to this problem., Methods: Based on collagen-fibrin interpenetrating, we developed an injectable thermosensitive DAT/PRP interpenetrating polymer network (t-DP gel/t-DPI) with the composition of DAT and temperature-controlled platelet-rich plasma (t-PRP). The same volume of t-DP gel and DAT gel were transplanted in a mouse model, and graft volume, weight, adipose tissue regeneration rate, and vascularization were compared., Results: The t-DPI showed reinforced stability for the interpenetrating polymer network (IPN) of collagen-fibrin and sustained release of growth factors from the t-PRP, resulting in improved graft volume, weight, adipose tissue regeneration, and vascularization., Conclusions: Compared with traditional DAT gel, t-DP gel promotes adipose tissue regeneration by promoting angiogenesis and stability, and t-DP gel has great potential for future applications in the field of plastic surgery for its simple preparation and regeneration ability., (© 2025 The Author(s). Journal of Cosmetic Dermatology published by Wiley Periodicals LLC.)

Cell therapies using human mesenchymal stromal cells (MSCs) are promising for a wide variety of clinical applications. However, broad-scale clinical translation is limited by conventional culture methods for MSC expansion within 2D tissue-culture flasks. MSC expansion on ECM-derived microcarriers within stirred bioreactor systems offers a promising approach to support MSC growth. Previously, our team established methods for fabricating ECM-derived microcarriers from a variety of decellularized tissue sources using electrospraying techniques. However, these microcarriers are relatively large and have a broad size distribution, which may limit their utility. Smaller and more uniform microcarriers may be favorable for MSC growth within bioreactors and have greater potential to serve as a minimally invasive injectable cell delivery platform. To address these limitations, the current project focused on the development of a new microfluidic-based approach enabling both uniform and small microcarrier production. Using a novel, modified 3D T-junction design, we successfully generated microcarriers using human decellularized adipose tissue (DAT) as the ECM source. Our new cost-effective device produced microbeads that were small and monodisperse, at a range of flow rate combinations and with high production rates. Photo-crosslinking using rose bengal allowed for the generation of microcarriers that retained their shape and could withstand rehydration, with a mean diameter of 196 ± 47 μm. Following methods optimization and microcarrier characterization, in vitro studies confirmed that the new microcarriers supported human adipose-derived stromal cell (hASC) attachment and growth, as well as ECM production, across 14 days within spinner flask bioreactors. Overall, this study demonstrates the feasibility of using our novel, cost-effective, and reusable microfluidics device to generate cell-supportive microcarriers comprised exclusively of ECM that show promise as an MSC expansion platform., (© 2025 The Author(s). Journal of Biomedical Materials Research Part A published by Wiley Periodicals LLC.)

Decellularized adipose tissue (DAT) has great clinical applicability, owing to its abundant source material, natural extracellular matrix microenvironment, and nonimmunogenic attributes, rendering it a versatile resource in the realm of tissue engineering. However, practical implementations are confronted with multifarious limitations. Among these, the selection of an appropriate gelation strategy serves as the foundation for adapting to diverse clinical contexts. The cross-linking strategies under varying physical or chemical conditions exert profound influences on the ultimate morphology and therapeutic efficacy of DAT. This review sums up the processes of DAT decellularization and subsequent gelation, with a specific emphasis on the diverse gelation strategies employed in recent experimental applications of DAT. The review expounds upon methodologies, underlying principles, and clinical implications of different gelation strategies, aiming to offer insights and inspiration for the application of DAT in tissue engineering and advance research for tissue engineering scaffold development.

Decellularized adipose tissue (DAT) provides a suitable microenvironment for adipose stem cells (ADSCs) and promotes their adipogenic differentiation. Recent studies have focused on allogeneic DAT; however, insufficient adipose sources limit its wider application of allogeneic DAT. In this study, we compared the ability of allogeneic and xenogeneic DATs to induce adipose regeneration to explore the feasibility of xenogeneic DAT as an adjunctive material for tissue repair. Decellularized adipose tissue from humans and rabbits was prepared using the Flynn's method. The proliferation, migration, and adipogenic functions of the allogeneic and the xenogeneic groups were compared. Rabbits were used to construct transplantation models: allogeneic (transplanted r-DAT) and xenogeneic groups (transplanted h-DAT). Comparison of DAT transplantation outcomes between the two groups. Xenogeneic DAT supports adipose regeneration. In vitro, adipose-derived stem cells cultured on xenogeneic DAT developed adipogenesis without media cues and were not statistically different from the effects of allogeneic DAT on cell migration, proliferation, and adipogenic capacity. In vivo, the animal model showed angiogenesis and adipogenesis, and the adipogenic ability of xenogeneic DAT was not statistically different from that of allogeneic DAT. Xenogeneic DATs can induce adipose regeneration, and its adipogenic ability has no statistical difference, compared with allogeneic DATs. Xenografts are expected to be useful for soft tissue repair. • In vivo and vitro experiments,xenogeneic decellularized adipose tissue does not produce deleterious effects on cells or organisms, which provided the premise for our transplantation. • We verified and compared the lipogenic ability of allogeneic and xenogeneic DAT in vivo and vitro. We found that the xenogeneic DAT could induce lipogenesis and was not statistically different from allogeneic DAT. • Xenotransplantation of DAT is a safe and effective and is expected to become a soft tissue filling material for clinicians. [ABSTRACT FROM AUTHOR]

Wound healing remains a challenge worldwide, and an ideal wound dressing that promotes healing is urgently needed. In this study, we developed a thermosensitive injectable hydrogel known as the thermosensitive decellularized adipose tissue/platelet-rich plasma interpenetrating polymer network (t-DPI) hydrogel based on decellularized adipose tissue (DAT) and temperature-controlled platelet-rich plasma (t-PRP). Abundant platelets, growth factors (GFs), and bioactive substances from the decellularized extracellular matrix (dECM) in the t-DPI hydrogel had positive effects on wound healing. The morphology, thermosensitivity, and GFs release properties of the t-DPI hydrogel were studied. In vitro, the t-DPI hydrogel showed ideal cytocompatibility and the abilities to promote the proliferation, migration and tube formation of human umbilical vein endothelial cells (HUVECs). Moreover, M2 macrophage polarization was enhanced after treated with t-DPI hydrogel. In vivo, the t-DPI hydrogel notably accelerated the full-thickness wound healing. The positive role of the t-DPI hydrogel on pro-angiogenesis, macrophage polarization and collagen deposition were validated in the nude mouse full-thickness skin defect model. In addition, the clinical application potential was confirmed using a pre-clinical porcine full-thickness wound model. Overall, this study demonstrated that the t-DPI hydrogel achieves fast and ideal wound healing in full-thickness wound defects and provides a potential clinical treatment strategy.

Simvastatin (SIM)‐loaded and human decellularized adipose tissue (DAT)‐coated porous hydroxyapatite (HAp) microspheres were developed for the first time to investigate their potential on bone regeneration. Microspheres were loaded with SIM and then coated with DAT for modifying SIM release and improving their biological response. HAp microspheres were prepared by water‐in‐oil emulsion method using camphene (C10H16) as porogen followed by camphene removal by freeze‐drying and sintering at 1200°C for 3 h. Sintered HAp microspheres with an average particle size of ~400 µm were porous and spherical in shape. Microspheres were incubated with 1, 2.5, and 5 mg/ml SIM stock solutions for drug loading, and drug loading was determined as 7.5 ± 0.79, 20.41 ± 1.93, and 46.26 ± 0.29 µg SIM/mg microspheres, respectively. SIM loading increased with the increase of the initial SIM loading amount. Faster SIM release was observed in DAT‐coated microspheres compared to bare counterparts. Higher SaoS‐2 cell attachment and proliferation were observed on DAT‐coated microspheres. Significantly higher alkaline phosphatase activity of SaoS‐2 cells was observed on DAT‐coated microspheres containing 0.01 mg/ml SIM than all other groups (p < 0.01). DAT‐coated microspheres loaded with SIM at low doses hold promise for bone tissue engineering applications. [ABSTRACT FROM AUTHOR]

Delayed neovascularization and unstable adipose formation are major confounding factors in adipose tissue engineering. A system using decellularized adipose tissue (DAT), adipose-derived stem cells (ADSCs), and human umbilical vein endothelial cells (HUVECs) has been preliminarily studied, but it requires optimization, as adipogenic and angiogenic capabilities for maintaining a stable construct shape are limited. The current study aimed to address these limitations. Our initial modification involved the addition of exogenous chemokine (C–C motif) ligand 2 (CCL2), which resulted in enhanced adipogenesis and angiogenesis. However, further improvement was required due to delayed blood recanalization. To further optimize the system, a vascularized fibrous capsule derived from an implanted silica expander was utilized as a second modification. We hypothesized this would function as both a microbioreactor to fix the seed cells and exogenous CCL2 locally and as a vascular bed to promote neovascularization. Compared with that of the CCL2 loaded ADSC-HUVECs cell sheet assembled DAT system, adding the silica expander capsule resulted in significantly increased construct stability, new vessel intensity, a greater number of Oil Red O-positive lipid droplets, more enhanced tissue remodeling, and upregulated peroxisome proliferator-activated receptor gamma (PPARγ) & leptin expression. Thus, these two modifications helped optimize the currently available ADSC-HUVEC cell sheet assembled DAT system, providing an adipose tissue construction strategy with enhanced adipogenesis and angiogenesis to reconstruct soft tissue defects. Moreover, close-to-normal leptin expression provided the engineered adipose tissue with a glucometabolic function, in addition to remodeling capabilities. Delayed neovascularization and unstable adipose formation are the two major problems in tissue engineering adipose. Here, we introduced an adipose tissue engineering construction strategy using a silica expander capsule along with hADSCs-HUVECs cell sheet-assembled DAT in a CCL2-rich microenvironment. Our data suggested that CCL2 could improve angiogenesis and adipogenesis in vitro and in vivo. The addition of tissue expander capsule could further improve the stability of construction and fabricated adipose tissue with increased new vessel intensity, greater numbers of Oil Red O-positive lipid droplets, more enhanced tissue remodeling, and upregulated leptin expression. CCL2 and expander capsule can have clinical utility for soft tissue defects repair, and these two factors can be useful in other tissue engineering. [Display omitted] [ABSTRACT FROM AUTHOR]

Decellularized extracellular matrix (ECM) from tissues is a promising biomaterial that can provide a complex 3D microenvironment capable of modulating cell response and tissue regeneration. In this study, we have integrated the decellularized thiolated adipose‐derived ECM, at different concentrations, with polyethylene glycol (PEG) using Michael addition between thiol and acrylate moieties. The potential for this material to support adipogenic differentiation of human adipose‐derived stem cells was evaluated by encapsulating cells in hydrogels with increasing concentrations of chemically modified ECM (mECM). Our results demonstrated a positive correlation between the ECM content in the hydrogels and cell proliferation, adipogenic marker expression, and lipid formation and accumulation. Furthermore, we have shown host cell infiltration and enhanced adipogenesis in vivo after implantation. These findings support the graft as a potential alternative for adipose tissue regeneration. [ABSTRACT FROM AUTHOR]

Cell-based therapies involving the delivery of adipose-derived stromal cells (ASCs) on decellularized adipose tissue (DAT) scaffolds are a promising approach for soft tissue augmentation and reconstruction. Our lab has recently shown that culturing human ASCs on DAT scaffolds within a perfusion bioreactor prior to implantation can enhance their capacity to stimulate in vivo adipose tissue regeneration. Building from this previous work, the current study investigated the effects of bioreactor preconditioning on the ASC phenotype and secretory profile in vitro, as well as host cell recruitment following implantation in an athymic nude mouse model. Immunohistochemical analyses indicated that culturing within the bioreactor increased the percentage of ASCs co-expressing inducible nitric oxide synthase (iNOS) and arginase-1 (Arg-1), as well as tumor necrosis factor-alpha (TNF-α) and interleukin-10 (IL-10), within the peripheral regions of the DAT relative to statically cultured controls. In addition, bioreactor culture altered the expression levels of a range of immunomodulatory factors in the ASC-seeded DAT. In vivo testing revealed that culturing the ASCs on the DAT within the perfusion bioreactor prior to implantation enhanced the infiltration of host CD31+ endothelial cells and CD26+ cells into the DAT implants, but did not alter CD45+F4/80+CD68+ macrophage recruitment. However, a higher fraction of the CD45+ cell population expressed the pro-regenerative macrophage marker CD163 in the bioreactor group, which may have contributed to enhanced remodeling of the scaffolds into host-derived adipose tissue. Overall, the findings support that bioreactor preconditioning can augment the capacity of human ASCs to stimulate regeneration through paracrine-mediated mechanisms.

BACKGROUND: Obesity-induced chronic inflammation and fibrosis in adipose tissue contributes to the progression of type 2 diabetes mellitus (DM). While fibrosis is known to induce mechanical stiffening of numerous tissue types, it is unknown whether DM is associated with alterations in adipose tissue mechanical properties. OBJECTIVE: The purpose of this study was to investigate whether DM is associated with differences in bulk viscoelastic properties of adipose tissue from diabetic (DM) and non-diabetic (NDM) obese subjects. METHODS: Bulk shear rheology was performed on visceral (VAT) and subcutaneous (SAT) adipose tissue, collected from obese subjects undergoing elective bariatric surgery. Rheology was also performed on the remaining extracellular matrix (ECM) from decellularized VAT (VAT ECM). Linear mixed models were used to assess whether correlations existed between adipose tissue mechanical properties and DM status, sex, age, and body mass index (BMI). RESULTS: DM was not associated with significant differences in adipose tissue viscoelastic properties for any of the tissue types investigated. Tissue type dependent differences were however detected, with VAT having significantly lower shear storage and loss moduli than SAT and VAT ECM independent of DM status. CONCLUSION: Although DM is typically associated with adipose tissue fibrosis, it is not associated with differences in macroscopic adipose tissue mechanical properties. [ABSTRACT FROM AUTHOR]

Objective To study the effect of decellularized adipose tissue (DAT) combined with vacuum sealing drainage (VSD) on skin wound healing. Methods (1) Preparation of human DAT scaffold material. (2) Observation and examination on the effect of DAT combined with VSD on wound healing. Twelve Bama miniature pigs were recruited. Four skin wounds with a diameter of 4 cm were made on the back of each pig. The four wounds were randomly divided into 4 groups for different treatments: DAT/VSD group (DAT combined with VSD), DAT group (DAT alone), VSD group (VSD alone) and control group (sterile gauze dressing). The wounds were photographed and the remaining wound area was measured on the day the wound was established and 7, 10, 14, 17, and 21 days after treatment. Meanwhile, HE staining, vWF immunohistochemical staining and microvessel count was performed on days 7, 14, and 21 after treatment. Moreover, the expression of vascularization- related factors was detected by fluorescence-quantitative PCR. Results DAT obtained in this study had a loose porous structure, with approximately complete decellularization. The remaining wound area of the DAT/VSD group was significantly smaller than that in the other three groups on 14, 17, and 21 days after treatment (P<0.05). The healing time span was less than the other three groups (P<0.01). The microvessel counts in the DAT/VSD group were higher than those in the other three groups on days 14 and 21 (P<0.01). Similarly, the expression of vascularization-related factors was higher than the other three groups on day 7 and 14 (P<0.05). Conclusion DAT combined with VSD rather than a single use of each method would benefit wound healing by promoting vascularization. [ABSTRACT FROM AUTHOR]

Adipose tissue engineering is considered as a promising treatment for repairing soft tissue defects. The decellularized extracellular matrix (ECM) is becoming the research focus in tissue engineering for its tissue specificity. In this study, the human adipose tissue liposucted from healthy people were decellularized by a series of mechanical, chemical, and enzymatic methods. The components of cell and lipid were effectively removed, whereas the collagens and other ingredients in adipose tissue were retained in the human decellularized adipose tissue (hDAT). Then the extracted hDAT was further fabricated into injectable hydrogel, which could be self‐assembled to form gel under certain condition. The hDAT hydrogel was nontoxic to human adipose‐derived stem cells (ADSCs) and could spontaneously induce adipogenic differentiation in vitro. It was highly biocompatible and could not cause inflammation and rejection after being implanted subcutaneously. The hDAT hydrogel developed in this study will be one of the available choices for soft tissue enlargement and cosmetic fillers because of its noninvasive in collection and implantation process. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1684–1694, 2019. [ABSTRACT FROM AUTHOR]

Abstract: Natural and synthetic materials have been developed to provide a three‐dimensional (3‐D) scaffold that mimics the extracellular matrix properties for tissue regeneration and reconstruction. On account of the excellent biological and mechanical properties, diverse decellularized tissue materials have been developed as natural scaffolds. Among them, decellularized adipose tissue (DAT) has generated great interest in recent years due to the extensiveness of the source and the eximious potential to enhance the regeneration and repair of damaged tissues. In this review, we compared the different physical, chemical, and biological treatment in recorded decellularization methods, and illustrated the similarities and differences in the characteristics of various aspects of DATs prepared by different methods, including macroscopic (macro) and microcosmic (micro) structure, cellular contents removal, DNA quantification, collagen, glycosaminoglycan (GAG) or growth factors retention, and mechanical properties. We also summarized the DAT application in the studies of tissue regeneration, wound healing, drug screening, and other diseases. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A:2562–2573, 2018. [ABSTRACT FROM AUTHOR]

Developing suitable biomaterials for post-mastectomy or post-lumpectomy breast reconstruction is highly important. This study is aimed at evaluating biomechanical suitability of decellularized adipose tissue (DAT) for this purpose. The study involves computational experiments for evaluating deformation of the breast reconstructed using DAT under loading conditions pertaining to two common body position changes of prone-to-supine and prone-to-upright. This was conducted using nonlinear finite element models where the breast geometry was obtained from MRI image of a female breast. The experiments were performed using DAT sourced from various adipose tissue depots in comparison to natural adipose tissue. Data obtained from the conducted experiments showed no contour defects with various DAT materials for simulated post-mastectomy or post-lumpectomy breast reconstruction under the loading conditions. They also demonstrated that a breast reconstructed using DAT derived from the breast or subcutaneous abdominal depots exhibit significantly closer deformation, both qualitatively and quantitatively, to that of a normal breast under the same loading conditions. Similarity of DAT deformation to that of natural breast tissue in post-surgery breast reconstruction was assessed using nonlinear finite element analysis. Our results provide evidence that DAT derived from subcutaneous abdominal and breast depots yield more analogous deformation pattern to the natural tissue in post-mastectomy breast reconstruction applications. This is quite encouraging, as breast and subcutaneous adipose tissue can be readily obtained in large quantities from breast or abdominal lipo-reduction surgery procedures. Furthermore, in post-lumpectomy cases all DAT samples used in this research showed similar deformation, and thus are suitable as breast tissue substituents. [ABSTRACT FROM AUTHOR]

With the goal of establishing a new clinically-relevant bioscaffold format to enable the delivery of high densities of human adipose-derived stromal cells (ASCs) for applications in soft tissue regeneration, a novel "cell-assembly" method was developed to generate robust 3-D scaffolds comprised of fused networks of decellularized adipose tissue (DAT)-derived beads. In vitro studies confirmed that the assembly process was mediated by remodelling of the extracellular matrix by the seeded ASCs, which were well distributed throughout the scaffolds and remained highly viable after 8 days in culture. The ASC density, sulphated glycosaminoglycan content and scaffold stability were enhanced under culture conditions that included growth factor preconditioning. In vivo testing was performed to compare ASCs delivered within the cell-assembled DAT bead foams to an equivalent number of ASCs delivered on a previously-established pre-assembled DAT bead foam platform in a subcutaneous implant model in athymic nude mice. Scaffolds were fabricated with human ASCs engineered to stably co-express firefly luciferase and tdTomato to enable long-term cell tracking. Longitudinal bioluminescence imaging showed a significantly stronger signal associated with viable human ASCs at timepoints up to 7 days in the cell-assembled scaffolds, although both implant groups were found to retain similar densities of human ASCs at 28 days. Notably, the infiltration of CD31+ murine endothelial cells was enhanced in the cell-assembled implants at 28 days. Moreover, microcomputed tomography angiography revealed that there was a marked reduction in vascular permeability in the cell-assembled group, indicating that the developing vascular network was more stable in the new scaffold format. Overall, the novel cell-assembled DAT bead foams represent a promising platform to harness the pro-regenerative paracrine functionality of human ASCs and warrant further investigation as a clinically-translational approach for volume augmentation. [ABSTRACT FROM AUTHOR]

Cellular therapies to stimulate therapeutic angiogenesis in individuals with critical limb ischemia (CLI) remain under intense investigation. In this context, the efficacy of cell therapy is dependent on the survival, biodistribution, and pro-angiogenic paracrine signaling of the cells transplanted. Hematopoietic progenitor cells (HPC) purified from human umbilical cord blood using high aldehyde dehydrogenase-activity (ALDHhi cells) and expanded ex vivo, represent a heterogeneous mixture of progenitor cells previously shown to support limb revascularization in mouse models of CLI. The objectives of this study were to investigate the utility of bioscaffolds derived from human decellularized adipose tissue (DAT) to guide the differentiation of seeded HPC in vitro and harness the pro-angiogenic capacity of HPC at the site of ischemia after implantation in vivo. Probing whether the DAT scaffolds altered HPC differentiation, label-free quantitative mass spectrometry and flow cytometric phenotype analyses indicated that culturing the HPC on the DAT scaffolds supported their differentiation towards the pro-angiogenic monocyte/macrophage lineage at the expense of megakaryopoiesis. Moreover, implantation of HPC in DAT scaffolds within a unilateral hindlimb ischemia model in NOD/SCID mice increased cell retention at the site of ischemia relative to intramuscular injection, and accelerated the recovery of limb perfusion, improved functional limb use and augmented CD31+ capillary density when compared to DAT implantation alone or saline-injected controls. Collectively, these data indicate that cell-instructive DAT scaffolds can direct therapeutic HPC differentiation towards the monocyte/macrophage lineage and represent a promising delivery platform for improving the efficacy of cell therapies for CLI. [ABSTRACT FROM AUTHOR]

Decellularized adipose tissue (DAT) scaffolds represent a promising cell-instructive platform for soft tissue engineering. While recent work has highlighted that mesenchymal stromal cells, including adipose-derived stromal cells (ASCs), can be combined with decellularized scaffolds to augment tissue regeneration, the mechanisms involved require further study. The objective of this work was to probe the roles of syngeneic donor ASCs and host-derived macrophages in tissue remodeling of DAT scaffolds within an immunocompetent mouse model. Dual transgenic reporter mouse strains were employed to track and characterize the donor ASCs and host macrophages within the DAT implants. More specifically, ASCs isolated from dsRed mice were seeded on DAT scaffolds, and the seeded and unseeded control scaffolds were implanted subcutaneously into MacGreen transgenic mice for up to 8 weeks. ASC seeding was shown to augment cell infiltration into the DAT implants at 8 weeks, and this was linked to significantly enhanced angiogenesis relative to the unseeded controls. Immunohistochemical staining demonstrated long-term retention of the syngeneic donor ASCs over the duration of the 8-week study, providing evidence that the DAT scaffolds are a cell-supportive delivery platform. Notably, newly formed adipocytes within the DAT implants were not dsRed + , indicating that the donor ASCs supported fat formation through indirect mechanisms. Immunohistochemical tracking of host macrophages through costaining for enhanced green fluorescent protein with the macrophage marker Iba1 revealed that ASC seeding significantly increased the number of infiltrating macrophages within the DAT implants at 3 weeks, while the fraction of macrophages relative to the total cellular infiltrate was similar between the groups at 1, 3, and 8 weeks. Consistent with the tissue remodeling response that was observed, western blotting demonstrated that there was significantly augmented expression of CD163 and CD206, markers of constructive M2-like macrophages, within the ASC-seeded DAT implants. Overall, our results demonstrate that exogenous ASCs enhance tissue regeneration within DAT scaffolds indirectly through multimodal mechanisms that include host cell recruitment and immunomodulation. These data provide further evidence to support the use of decellularized scaffolds as a delivery platform for ASCs in tissue engineering.

Tissue-engineering approaches hold promise to address the need in plastic and reconstructive surgery for new therapies that promote stable adipose tissue regeneration. Previous studies have demonstrated the potential of combining decellularized adipose tissue (DAT) scaffolds with adipose-derived stromal cells (ASCs) for volume augmentation applications. With the goal of enhancing in vivo angiogenesis and adipogenesis, this study evaluated the effects of culturing human ASCs on DAT scaffolds within a perfusion bioreactor. Using this system, the impact of both dynamic culture and hypoxic preconditioning were explored in vitro and in vivo. Initial studies compared the effects of 14 days of culture within the perfusion bioreactor under hypoxia (2% O 2 ) or normoxia (~20% O 2 ) on human ASC expansion and expression of hypoxia inducible factor-1 alpha (HIF-1α) in vitro relative to static cultured controls. The findings indicated that culturing within the bioreactor under hypoxia significantly increased ASC proliferation on the DAT, with a higher cell density observed in the scaffold periphery. Subsequent characterization in a subcutaneous implant model in athymic nude mice revealed that in vivo angiogenesis and adipogenesis were markedly enhanced when the ASCs were cultured on the DAT within the perfusion bioreactor under hypoxia for 14 days prior to implantation relative to the other culture conditions, as well as freshly seeded and unseeded DAT control groups. Overall, dynamic culture within the perfusion bioreactor system under hypoxia represents a promising approach for preconditioning ASCs on DAT scaffolds to enhance their capacity to stimulate angiogenesis and host-derived adipose tissue regeneration., (© 2020 John Wiley & Sons, Ltd.)

Objective: To preliminary explore the effect of decellularized adipose tissue (DAT) combined with vacuum sealing drainage (VSD) on wound inflammation in pigs., Methods: The DAT was prepared through the process of freeze-thaw, enzymatic digestion, organic solvent extraction, and vacuum freeze-drying. The appearance of DAT was observed before and after freeze-drying. HE staining was used to observe its structure and acellular effect. Eighteen male Bama minipigs were recruited, and four dorsal skin soft tissue wounds in diameter of 4 cm were made on each pig and randomly divided into 4 groups for different treatments. The wounds were treated with DAT combined with VSD in DAT/VSD group, DAT in DAT group, VSD in VSD group, and sterile gauze dressing in control group. HE staining was performed at 3, 7, 10, and 14 days after treatment. Moreover, the expressions of inflammatory factors [interleukin 1β (IL-1β), IL-6, and tumor necrosis factor α (TNF-α)], as well as the phenotypes of M1 and M2 macrophage phenotypic markers [inducible nitric oxide synthase (iNOS) and arginase 1 (ARG-1)] were detected by real-time fluorescence quantitative PCR (qRT-PCR). ELISA was used to determine the content of iNOS and ARG-1., Results: General observation and HE staining showed that DAT obtained in this study had a loose porous structure without cells. The neutrophils of wounds were significantly less in DAT/VSD group than in control group and DAT group ( P <0.05) at 3 days after treatment, and the difference was not significant ( P >0.05) between DAT/VSD group and VSD group. And the neutrophils were significantly less in DAT/VSD group than in other three groups ( P <0.05) at 7, 10, and 14 days. The mRNA expressions of IL-1β, IL-6, TNF-α, and iNOS were significantly lower in DAT/VSD group than in other three groups at 3, 7, 10, and 14 days ( P <0.05), while the mRNA expression of ARG-1 was significantly higher in DAT/VSD group than in other three groups ( P <0.05). ELISA showed that the content of iNOS was significantly lower in DAT/VSD group than in other three groups at 3, 7, 10, and 14 days ( P <0.05), while the content of ARG-1 was significantly higher in DAT/VSD group than in other three groups ( P <0.05)., Conclusion: DAT combined with VSD can significantly reduce inflammatory cell infiltration during wound healing, regulate the expressions of inflammatory factors and macrophage phenotype, and the effect is better than single use of each and conventional dressing change.

While extracellular matrix (ECM)-derived coatings have the potential to direct the response of cell populations in culture, there is a need to investigate the effects of ECM sourcing and processing on substrate bioactivity. To develop improved cell culture models for studying adipogenesis, the current study examines the proliferation and adipogenic differentiation of human adipose-derived stem/stromal cells (ASCs) on a range of ECM-derived coatings. Human decellularized adipose tissue (DAT) and commercially available bovine tendon collagen (COL) are digested with α-amylase or pepsin to prepare the coatings. Physical characterization demonstrates that α-amylase digestion generates softer, thicker, and more stable coatings, with a fibrous tissue-like ultrastructure that is lost in the pepsin-digested thin films. ASCs cultured on the α-amylase-digested ECM have a more spindle-shaped morphology, and proliferation is significantly enhanced on the α-amylase-digested DAT coatings. Further, the α-amylase-digested DAT provides a more pro-adipogenic microenvironment, based on higher levels of adipogenic gene expression, glycerol-3-phosphate dehydrogenase (GPDH) enzyme activity, and perilipin staining. Overall, this study supports α-amylase digestion as a new approach for generating bioactive ECM-derived coatings, and demonstrates tissue-specific bioactivity using adipose-derived ECM to enhance ASC proliferation and adipogenic differentiation., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

There is a substantial need for new strategies to stimulate cutaneous tissue repair in the treatment of chronic wounds. To address this challenge, our team is developing modular biomaterials termed "bead foams", comprised of porous beads synthesized exclusively of extracellular matrix (ECM) and assembled into a cohesive three-dimensional (3-D) network. In the current study, bead foams were fabricated from human decellularized adipose tissue (DAT) or commercially-sourced bovine tendon collagen (COL) to explore the effects of ECM composition on human wound edge dermal fibroblasts (weDF) sourced from chronic wound tissues. The DAT and COL bead foams were shown to be structurally similar, but compositionally distinct, containing different levels of glycosaminoglycan content and collagen types IV, V, and VI. In vitro testing under conditions simulating stresses within the chronic wound microenvironment indicated that weDF survival and angiogenic marker expression were significantly enhanced in the DAT bead foams as compared to the COL bead foams. These findings were corroborated through in vivo assessment in a subcutaneous athymic mouse model. Taken together, the results demonstrate that weDF survival and paracrine function can be modulated by the matrix source applied in the design of ECM-derived scaffolds and that the DAT bead foams hold promise as cell-instructive biological wound dressings. STATEMENT OF SIGNIFICANCE: Biological wound dressings derived from the extracellular matrix (ECM) can be designed to promote the establishment of a more permissive microenvironment for healing in the treatment of chronic wounds. In the current work, we developed modular biomaterials comprised of fused networks of porous ECM-derived beads fabricated from human decellularized adipose tissue (DAT) or commercially-available bovine collagen. The bioscaffolds were designed to be structurally similar to provide a platform for investigating the effects of ECM composition on human dermal fibroblasts isolated from chronic wounds. Testing in in vitro and in vivo models demonstrated that cell survival and pro-angiogenic function were enhanced in the adipose-derived bioscaffolds, which contained higher levels of glycosaminoglycans and collagen types IV, V, and VI. Our findings support that the complex matrix composition within DAT can induce a more pro-regenerative cellular response for applications in wound healing., (Copyright © 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)