Search

Double/multiple bottom-simulating reflectors (BSRs) have been discovered worldwide, but their preservation and formation mechanism remain unclear because most studies are based on seismic data, lacking direct evidence like well logging data. This study introduces a novel well log-based interpretation of double BSR, suggesting that the secondary BSR (BSR2) is the interface between little residual gas and the overlying water-saturated sediment, and the free gas is trapped by capillary seals. The BSR2's amplitude is influenced by the nearby porosity, with lower porosity resulting in stronger reflections. Seismic attributes reveal a dynamic process of hydrate cycle that hydrate dissociation occurs above BSR2, followed by gas migrate to form a new BSR1. The upshift of BSR2 is mainly controlled by sedimentation rate, which varies across different regions, leading to larger upshifts in areas with higher sedimentation rates. Moreover, BSR2's upshift is negatively related to the reflection magnitude of BSR2, because rapidly depositing sediments with higher porosity and lower percolation threshold allow lesser gas sealed beneath the BSR2. Our findings suggest that double BSRs are predominantly formed in muddy sediments under rapid geological events like rapid sedimentation. However, each BSR can be preserved as well as observed to indicate that the BSR has existed for an extended period of time during which the geologic environment has been relatively stable, e.g., low sedimentation rates. This detailed sedimentation-controlled BSR adjustment provides new insights for the interpretation of double BSR and the paleo hydrate dissociation. • The formation of double BSRs in Shenhu area is controlled by sedimentation. • Little free gas is trapped by capillary seals below the paleo BSR. • Double BSRs are predominantly formed in muddy sediments under rapid geological events. • The presence of BSRs indicates stable geological conditions over extended periods. [ABSTRACT FROM AUTHOR]

The current study examines the methane gas hydrate stability zone (GHSZ) in the Shenhu area in the northern South China Sea (SCS) as an example to calculate the thickness of the GHSZ and reconstruct its evolution since 8.2 Ma. Two mechanisms for typical double BSRs in the Shenhu area are shown, and the relationship between the evolving thickness of the GHSZ and the dynamic accumulation of NGHs at typical stations in the Shenhu area is clarified. The results show that the thickness of the GHSZ varies over time with overall thickening in the Shenhu area. The current thickness of the GHSZ is between 160.98 and 267.94 m. Two mechanisms of double BSRs in the Shenhu area are summarized: the double BSRs pattern based on changes in formation temperature, pressure and other conditions and the double BSRs pattern based on differences in gas source and composition. The formation process and occurrence characteristics of double BSRs and hydrate at site SH-W07-2016 in the Shenhu area are also closely related to the changes in thickness of the GHSZ. In addition, the age when gas source first enters the GHSZ has a considerable influence on the dynamic accumulation process of hydrate. Since the formation of hydrate above the BSR at site SH-W07-2016, the GHSZ has experienced up to two periods of thickening and two periods of thinning at this site. With the changes in the thickness of the GHSZ, up to two stages of hydrate formation and at most two stages of hydrate decomposition have occurred. This paper is of great value for understanding the formation of multiple bottom-simulating reflectors (BSRs) as well as the migration, accumulation and dissipation of natural gas hydrate (NGH) during the dynamic accumulation process.

To investigate the relationship among methane seepage, subsurface gas hydrate, and heat flow and estimate hydrate-related gas amount in the Dongsha region, northeastern South China Sea, in this study we first identified Bottom Simulating Reflector (BSR) using multi-channel seismic data collected in 2004. Subsequently, the thickness of gas hydrate stability zones (GHSZ) was calculated from the observed BSR using time–depth conversion, ranging from 60 to 300 m in seawater depths of 600–1200 m. Additionally, a seismic feature of double BSRs is locally observed in this region, which is possibly caused by either the presence of mixed gas source (thermogenic and biogenic) or migration of a pre-existing base of GHSZ. Geothermal gradient, heat flow and hydrate-related gas volume are calculated based on the thickness of GHSZ. The estimated geothermal gradient and heat flow varies from 20 to 100 °C/km with an average of 48 °C/km, and from 20 to 120 mW/m 2 with an average of 54 mW/m 2 , respectively. Both estimated geothermal gradient and heat flow are generally consistent with those from measurements. High geothermal gradient (up to 60 °C/km) and heat flow anomaly (up to 80 mW/m 2 ) are present in one methane seepage site, where BSR is clear and reliable. High heat flow could result in thin GHSZ in the continental slope. In this case, gas hydrate could form in the shallow sediments, making dissolved gas from hydrate and/or free deep-seated gas easy to migrate upwards to seafloor through faults, and thus resulting in the occurrence of methane venting. The hydrate-related gas volume is estimated as ∼6 × 10 11 m 3 over an area of ∼400 km 2 with possible occurrence of BSR. This finding would shed lights on understanding potential amount of subsurface methane in the Dongsha region and place useful constraints for modeling GHSZ from measured heat flow data, especially in regions where no BSRs are present. [ABSTRACT FROM AUTHOR]

Research on the formation and distribution of submarine channel systems and associated gas-bearing fluids is of great significance for gas hydrate exploration. Disseminated gas hydrates with high saturation up to 65% were recovered from a submarine ridge, equivalent to the levee of the channel–levee system in the Shenhu area, northern South China Sea. Sedimentary deposits in the submarine ridge were dominated by fine-grained silt and clay-rich silt; gas hydrates with relatively high saturation preferentially accumulated in coarser sediments with less clay content. Although abundant foraminifera fossils may have increased reservoir pore space, their presence was not a necessary condition for high-saturation hydrates. Higher levels of pyrite appeared in the reservoirs corresponding to high-saturation hydrates, which suggests that the reducing environment caused by sufficient methane provided adequate gas to form higher-saturation hydrates. Because of the migration of the channel–levee system, different channels formed their respective depositional systems composed of channel-filling, buried channel-filling, erosion grooves, and slumped turbidities. Relatively coarse-grained deposits were identified in the channel fillings and levees, and the accumulation of hydrates was affected by the lithological features of the sediments and their spatial coupling with the gas hydrate stability zone (GHSZ). GHSZ modeling based on in situ measurements indicated that erosion and sedimentation, as well as variations of the geothermal gradient, resulted in the upward/downward migration of bottom simulating reflectors (BSRs). On the erosion flank of the channel, the strata thinned, and rapid erosion was likely to destroy the shallower BSR, causing gas hydrate decomposition and methane release, and may have caused turbidite slumping and seepage, whereas the strata thickened on the deposition flank of the channel. The BSR in the channel–levee system would gradually move toward the new GHSZ, eventually forming a new BSR; parts of the BSR that formed under the original P–T conditions have remained, and double BSRs occurred in the seismic profile. The thermal fluid that moved upward through a gas chimney may also have caused the migration of the GHSZ, resulting in the emergence of double BSRs. During the lateral migration of the channel and the vertical migration of the gas-bearing fluid, there was a dynamic adjustment relationship between the GHSZ and the erosion–deposition process of the channel, resulting in the dynamic accumulation of hydrates in the Shenhu area. A model to demonstrate the relationship between channel migration and variation of the BSR was established, which is of great significance for understanding the formation and accumulation mechanisms of gas hydrates. Image 1 • Disseminated gas hydrates with high saturation are recovered from a levee. • Not foraminifera fossils but adequate gas supply controls high saturation hydrates. • Double BSRs associated with channel migration and gas chimney are found. • Channel migration results in dynamic accumulation of gas hydrates. [ABSTRACT FROM AUTHOR]