Search

Polyethylene (PE) is the most commonly used plastic type in the world, contributing significantly to the plastic waste crisis. Microbial degradation of PE in natural environments is unlikely due to its inert saturated carbon‐carbon backbones, which are difficult to break down by enzymes, challenging the development of a biocatalytic recycling method for PE waste. Here, we demonstrated the depolymerization of low‐molecular‐weight (LMW) PE using an enzyme cascade that included a catalase‐peroxidase, an alcohol dehydrogenase, a Baeyer Villiger monooxygenase, and a lipase after the polymer was chemically pretreated with m‐chloroperoxybenzoic acid (mCPBA) and ultrasonication. In a preparative experiment with gram‐scale pretreated polymers, GC‐MS and weight loss determinations confirmed ~27 % polymer conversion including the formation of medium‐size functionalized molecules such as ω‐hydroxycarboxylic acids and α,ω‐carboxylic acids. Additional analyses of LMWPE‐nanoparticles using AFM showed that enzymatic depolymerization reduced the sizes of these mCPBA‐ and enzyme‐treated LMWPE‐nanoparticles. This multi‐enzyme catalytic concept with distinct chemical steps represents a unique starting point for future development of bio‐based recycling methods for polyolefin waste. [ABSTRACT FROM AUTHOR]

Highlights: Two Aspergillus isolates from bitumen grow well on extra-heavy crude oil. Extracellular enzymes of both fungi efficiently degrade extra-heavy oil fractions. Hydrocarbon redistribution co-occurs with biogas and organic acid formation. Oil properties are enzymatically improved by viscosity reduction and demetallization. Heavy crude oil (HCO) and extra-heavy crude oil (EHCO) with high viscosity and density pose enormous challenges to the exploitation of oil reserves. While bacteria are increasingly used in biocatalytic upgrading of HCO and EHCO, less attention has been paid to the potential of fungi. The aim of this study was to ascertain the role of fungal extracellular enzymes from Aspergillus spp. In the biodegradation of EHCO and their application potential for enhanced oil recovery. A. terreus HJ2 and A. nidulans HJ4 with the ability to biodegrade HCO were previously isolated from bitumen enrichment cultures. Both strains grew well on EHCO agar plates supplemented with a small amount of soluble starch (0.2%) and yeast extract (0.3%). Extracellular enzymes from each strain separately, as well as mixtures of the enzymes, exhibited EHCO degradation activity, leading to redistribution of hydrocarbons with substantial formation of biogases and organic acids in a 7-day period. Enzymatic degradation resulted in decreased contents of resins and asphaltenes, accompanied by increased contents of saturates and aromatics. Gas chromatography–mass spectrometry revealed distinct redistribution patterns of n-alkane in the biotreated oil. Enzymatic degradation additionally caused considerable reduction in oil viscosity (by 12.7%) and heavy metal concentrations (Ni, by 44.1%; Fe, by 54.0%; V, by 31.6%). The results provide empirical evidence for the application potential of fungal extracellular enzymes from Aspergillus spp. in EHCO recovery and biocatalytic upgrading of EHCO. [ABSTRACT FROM AUTHOR]

As plastics become more ubiquitous, their impact on the environment and on human health cannot be overlooked. Once generated, micro‐ and nano‐plastics end‐up in the environment, causing widespread health and environmental risks. This is a significant environmental problem given the minuscule sizes of microplastics, and therefore warrants further investigation. This study presents a comprehensive review of the ecotoxicology of microplastics and methods for their degradation and decomposition besides discussing the fate and transport processes, recent progress, emerging strategies, challenges and potential future directions. The authors carefully evaluate the processes through which microplastics cause harm, from molecular interactions in species, to ecological impacts, and end with advances in microplastic biodegradation. Different kinds of microplastics found in the environment include polyethylene, polystyrene, polypropylene, polyvinyl chloride, polycarbonate, polyurethane, polypropylene, and polyethylene terephthalate. Analysis of microbial and enzymatic decomposition provides several swelling mitigation strategies designed to reduce environmental threats. In‐depth investigations of microplastic ecotoxicity and biodegradation are being facilitated by interdisciplinary proposals in the areas of nanotechnology, new analytical methods, and synthetic biology. The extensive study helps understand microplastics comprehensively which in‐turn ensures informed actions to mitigate the challenge of the environmental impact of microplastics for sustainable future. [ABSTRACT FROM AUTHOR]

A variety of important agricultural crops host fungi from the Aspergillus genus can produce cancerogenic secondary metabolites such as aflatoxins. Consequently, novel strategies for detoxification and their removal from food and feed chains are required. Here, detoxification of Aflatoxin B1 (AFB1) by the Bacillus subtilis multi-copper oxidase CotA (BsCotA) was investigated. This laccase was recombinantly produced in E. coli while codon optimization led to duplication of the amount of active protein obtained. CuCl2 was added to the cultivation medium leading to a 25-fold increase of Vmax corresponding to improved incorporation of Cu2+ into the enzyme protein which is essential for the catalytic reaction. To avoid potential cytotoxicity of Cu2+, cultivation was performed at microaerobic conditions indeed leading to 100x more functional protein when compared to standard aerobic conditions. This was indicated by an increase of Vmax from 0.30 ± 0.02 to 33.56 ± 2.02 U/mg. Degradation kinetics of AFB1 using HPLC with fluorescence detection (HPLC-FLD) analysis indicated a theoretical substrate saturation above solubility in water. At a relatively high concentration of 500 μg/L, AFB1 was decomposed at 10.75 μg/Lh (0.17 nmol*min−1*mg−1) at a dosage of 0.2 μM BsCotA. AFQ1 and epi-AFQ1 were identified as the initial oxidation products according to mass spectrometry (i.e., HPLC-MS, HPLC-QTOF). None of these molecules were substrates for laccase but both decomposed in buffer. However, decomposition does not seem to be due to hydration of the vinyl ether in the terminal furan ring. Genotoxicity of the formed AFB1 was assessed in several dilutions based on the de-repression of the bacterial SOS response to DNA damage indicating about 80-times reduction in toxicity when compared to AFQ1. The results of this study indicate that BsCotA has high potential for the biological detoxification of aflatoxin B1. [ABSTRACT FROM AUTHOR]

Mycotoxins are secondary metabolites produced by fungi during their growth. They not only seriously affect the yield of food crops but also pose a threat to human and animal health. Physical and chemical methods have been widely used to reduce the production and accumulation of mycotoxins in the field or after harvest, but these methods have difficulty in completely removing mycotoxins while keeping the nutrients at the same time. Biodegradation methods using isolated enzymes have shown superiority and potential for modest reaction conditions, high degradation efficiency and degradation products with low toxicity. Therefore, the occurrence, chemical structures, and toxicology of six prevalent mycotoxins (deoxynivalenol, zearalenone, aflatoxin, patulin, fumonisin, and ochratoxin) were described in this manuscript. The identification and application of mycotoxin-degrading enzymes were thoroughly reviewed. It is believed that in the near future, mycotoxin-degrading enzymes are expected to be commercially developed and used in the feed and food industries. [ABSTRACT FROM AUTHOR]

Although Alzheimer's disease (AD) is traditionally viewed as a central nervous system disorder driven by the cerebral accumulation of toxic beta-amyloid (Aβ) peptide, new interpretations of the amyloid cascade hypothesis have led to the recognition of the dynamic equilibrium in which Aβ resides and the importance of peripheral Aβ production and degradation in maintaining healthy Aβ levels. Our review sheds light on the critical role of peripheral organs, particularly the liver, in the metabolism and clearance of circulating Aβ. We explore the mechanisms of Aβ transport across the blood–brain barrier (BBB) via transport proteins such as LRP1 and P-glycoprotein. We also examine how peripheral clearance mechanisms, including enzymatic degradation and phagocytic activity, impact Aβ homeostasis. Our review also discusses potential therapeutic strategies targeting peripheral Aβ clearance pathways. By enhancing these pathways, we propose a novel approach to reducing cerebral Aβ burden, potentially slowing AD progression. [ABSTRACT FROM AUTHOR]

Polybutylene succinate, polybutylene adipate, polybutylene suberate and their copolyesters were synthesized. The physical properties and biodegradability of these polyesters were controlled by adjusting the composition of carboxyl monomers. Compared with the homopolyesters, the addition of comonomer during polymerization resulted in the formation of copolyesters with lower melting temperatures and crystallinity. Among them, poly(butylene succinate-co-adipate) (PBSA) had the lowest crystallinity, and poly(butylene adipate-co-suberate) (PBASub) had the lowest melting point. The elongation at break and tensile strength of PBSA was 766.2% and 21.5 MPa, respectively. Enzymatic degradation by Fusarium solani cutinase (FsC) showed that both the crystalline and amorphous regions of the polyester were simultaneously degraded by FsC, and the crystal structure of the polyester was not disrupted. FsC preferentially got attached to the surface of polyesters, subsequently attacked the center of the films, and the water penetrated the amorphous region, leading to enhanced enzymatic hydrolysis. The biodegradability of copolyester was higher than that of homopolyesters. PBSA and poly(butylene succinate-co-suberate) (PBSSub) were completely degraded in about 10 h, and can be used in agricultural, automotive, electronics, biomedical materials, packaging, etc.

Drug addiction is a pervasive problem worldwide. It not only affects the abuser's life, but also poses a serious threat to public health. Accordingly, there is a strong demand for the development of novel and effective therapies for drug addiction. Considering that small-molecule drugs have only had limited success, there is great interest in developing alternative strategies that extend the reach of small-molecule-based therapies. The antibody-based trapping approach and the enzyme catalytic strategy have been considered as promising ways to reduce the euphoria of drug users by altering drug pharmacokinetics and decreasing drug concentrations in the central nervous system. However, these biological macromolecules are generally unstable and their in vivo half-lives are short. With the rapid development of gene editing technologies, it is possible to perform ex vivo gene therapy for the long-term and stable delivery of enzymes and other effector proteins, which could free abusers from frequent injections of therapeutics. By constructing programmed gene switches that regulate spatiotemporal gene expression in response to illicit drugs, this perspective proposed the concept of preventing drug addiction by the drug itself. This strategy enables the controlled release of therapeutic proteins in vivo and is expected to improve patient safety and compliance. This will open up new opportunities for next-generation medicine and hold great promise for expanding our ability to treat drug addiction.

The emerging threat of antibiotic resistance and the formation of resilient biofilms pose a challenge to contemporary healthcare systems. This review dives into the interplay between antibiotic resistance mechanisms and biofilm production. Many pathogenic bacteria have an inherent ability of adhering tightly to a surface forming a complex matrix of extracellular polymeric substances (EPS) surrounding their cells. This is called a biofilm which allows pathogenic bacteria to survive in unsuitable environment. The adaptive nature of biofilms provides a protective shield against conventional antimicrobial agents, promoting chronic infections and complicating medical interventions. This phenomenon further adds to the ever-increasing problem of antibiotic resistance. Thus, there is an immediate necessity in developing novel strategies to deal with bacterial biofilms. In terms of human health, biofilms can be formed on mucosal surfaces and on surfaces of medical equipment. They are also a major reason for causing ‘biofouling’. Different approaches have been undertaken to counteract the menace of biofilms encompassing physical, chemical as well as biological methods. However, recent studies have shown that natural bioactive compounds found in fungal extracts, which has already been gaining attention due to their various properties like immunomodulatory activity, anti-tumor activity, antimicrobial activity etc., have the ability to prevent the formation as well as viability of biofilms through numerous mechanisms. This article thus explores the nuances of biofilm formation and its effects, and further delves deep into the convincing potential of the different components in fungal extracts against bacterial biofilms.

Objective: The goal of this systematic review was to identify the mechanisms associated with the enzymatic degradation of collagen and gelatin biomaterials and the possible associated flaws. Methods: Four databases (PubMed, B-On, Cochrane Library, and ResearchGate) were used for the bibliographic search of articles. The research question was formulated using the PCC method, (P): collagen or gelatin sponges, hydrogels, and scaffolds; concept (C): enzymatic degradation of collagen or gelatin sponges, hydrogels, and scaffolds; and context (C): effect of enzymatic action on degradation time of collagen or gelatin sponges, hydrogels, and scaffolds. The search was contextualized according to PRISMA recommendations. The identification and exclusion of evidence followed the PRISMA criteria, with specific inclusion and exclusion factors being stipulated for the selection of articles. The risk of bias assessment was performed using the QUIN Scale. Results: The initial search was composed of 13,830 articles after removing duplicates; 56 articles followed for the full-text reading; 45 were excluded; then, 11 articles were obtained, constituting the results of this systematic review. All studies evaluated the materials using gravimetric analysis, and collagenases were the proteases used for the degradation solution. The materials tested were as follows: human-like collagen (HLC) hydrogel with microbial transglutaminase (MTGase), gelatin sponges subjected to different types of crosslinking, and collagen scaffolds with different types of crosslinking. The period of analysis varied between 0.25 h and 35 days. It was possible to highlight the lack of uniformity in the protocols used, which varied largely, thus influencing the degradation times. The risk of bias was low in nine studies and medium in two studies. Conclusions: This systematic review identified a gap in the literature, highlighting the absence of in vitro studies using human saliva and a collagenase concentration close to the physiological levels to simulate oral dynamics. However, based on existing literature, the mechanisms associated with collagen enzymatic degradation in collagen and gelatin biomaterials were comprehensively understood, answering the first research question postulated. In response to the second research question, the main shortcomings identified in the laboratory evaluation of mechanisms associated with collagen enzymatic degradation in collagen and gelatin biomaterials included the lack of standardization in degradation test protocols; this limited inter-study comparisons, which increased heterogeneity. Additionally, variations in collagenase concentrations and types influenced collagen degradation rates, and inappropriate evaluation intervals hindered the identification of total degradation time.

A series of partially bio-based and biodegradable poly(propylene terephthalate-co-adipate) (PPTA) random copolymers with different components were prepared by the melt polycondensation of petro-based adipic acid and terephthalic acid with bio-based 1,3-propanediol. The microstructure, crystallization behavior, thermal properties, and enzymatic degradation properties were further investigated. The thermal decomposition kinetics was deeply analyzed using Friedman's method, with the thermal degradation activation energy ranging from 297.8 to 302.1 kJ/mol. The crystallinity and wettability of the copolymers decreased with the increase in the content of the third unit, but they were lower than those of the homopolymer. The thermal degradation activation energy E, carbon residue, and reaction level n all showed a decreasing trend. Meanwhile, the initial thermal decomposition temperature (Td) was higher than 350 °C, which can meet the requirements for processing and use. The PPTA copolymer material still showed excellent thermal stability. Adding PA units could regulate the crystallinity, wettability, and degradation rate of PPTA copolymers. The composition of PPTA copolymers in different degradation cycles was characterized by 1H NMR analysis. Further, the copolymers' surface morphology during the process of enzymatic degradation also was observed by scanning electron microscopy (SEM). The copolymers' enzymatic degradation accorded with the surface degradation mechanism. The copolymers showed significant degradation behavior within 30 days, and the rate increased with increasing PA content when the PA content exceeded 45.36%. [ABSTRACT FROM AUTHOR]

Objective: The goal of this systematic review was to identify the mechanisms associated with the enzymatic degradation of collagen and gelatin biomaterials and the possible associated flaws. Methods: Four databases (PubMed, B-On, Cochrane Library, and ResearchGate) were used for the bibliographic search of articles. The research question was formulated using the PCC method, (P): collagen or gelatin sponges, hydrogels, and scaffolds; concept (C): enzymatic degradation of collagen or gelatin sponges, hydrogels, and scaffolds; and context (C): effect of enzymatic action on degradation time of collagen or gelatin sponges, hydrogels, and scaffolds. The search was contextualized according to PRISMA recommendations. The identification and exclusion of evidence followed the PRISMA criteria, with specific inclusion and exclusion factors being stipulated for the selection of articles. The risk of bias assessment was performed using the QUIN Scale. Results: The initial search was composed of 13,830 articles after removing duplicates; 56 articles followed for the full-text reading; 45 were excluded; then, 11 articles were obtained, constituting the results of this systematic review. All studies evaluated the materials using gravimetric analysis, and collagenases were the proteases used for the degradation solution. The materials tested were as follows: human-like collagen (HLC) hydrogel with microbial transglutaminase (MTGase), gelatin sponges subjected to different types of crosslinking, and collagen scaffolds with different types of crosslinking. The period of analysis varied between 0.25 h and 35 days. It was possible to highlight the lack of uniformity in the protocols used, which varied largely, thus influencing the degradation times. The risk of bias was low in nine studies and medium in two studies. Conclusions: This systematic review identified a gap in the literature, highlighting the absence of in vitro studies using human saliva and a collagenase concentration close to the physiological levels to simulate oral dynamics. However, based on existing literature, the mechanisms associated with collagen enzymatic degradation in collagen and gelatin biomaterials were comprehensively understood, answering the first research question postulated. In response to the second research question, the main shortcomings identified in the laboratory evaluation of mechanisms associated with collagen enzymatic degradation in collagen and gelatin biomaterials included the lack of standardization in degradation test protocols; this limited inter-study comparisons, which increased heterogeneity. Additionally, variations in collagenase concentrations and types influenced collagen degradation rates, and inappropriate evaluation intervals hindered the identification of total degradation time. [ABSTRACT FROM AUTHOR]

The lysine p-toluenesulfonic acid ionic liquid ([Lys][p-TSA]), one kinds of amino acid ionic liquids, was synthesized by one-step method, which was employed to control the interfacial structure and degradation behavior of poly(lactide)/poly(butylene adipate-co-terephthalate) (PLA/PBAT) blends. The [Lys][p-TSA] was incorporated into PLA/PBAT blends with different contents by melt blending, and the effect of [Lys][P-TSA] on the interfacial structure, thermal stability, crystallization behavior, rheological behavior and degradation behavior of PLA/PBAT blends were investigated. The SEM results demonstrate that [Lys][p-TSA] could enhance the compatibility between PLA and PBAT in the PLA/PBAT blends. Thermal gravimetric results showed that the incorporation of [Lys][p-TSA] into PLA/PBAT blends could not affect their thermal stability. Differential scanning calorimetry (DSC) measurements showed that [Lys][p-TSA] can improve the crystallinity of PLA, and the rheological behavior of the blends indicated that [Lys][p-TSA] can enhance the chain mobility of PLA and PBAT. More importantly, the degradation behavior of the blends revealed that [Lys][p-TSA] could affect the distribution of lipase in PLA/PBAT blends, so that the relative degradation rate of each component of the blends was well-controlled. As the [Lys][p-TSA] content increased, the degradation rate of the PLA/PBAT blend in phosphate buffered saline (PBS) solution, artificial seawater, porcine pancreas lipase (PPL) solution and Candida antarctica lipase B (CALB) solution was enhanced. When the contents of [Lys][p-TSA] was 4 phr in the PLA/PBAT blend, the weight loss of the blend in PPL enzyme solution reached to 31.59% after 49 days, which was 3.79 times higher than that of PLA/PBAT blend without [Lys][p-TSA]. The enzymatic degradation mechanism of the blends was studied by density functional theory (DFT) and 1H nuclear magnetic resonance (NMR), and it was found that [Lys][p-TSA] could control the distribution of lipase in the blends, which accelerated the enzymatic degradation of the PLA/PBAT blend. This study could provide some new way on enhancing the properties of PLA/PBAT blends while reducing the harm of microplastics. [ABSTRACT FROM AUTHOR]

Polycyclic aromatic hydrocarbons (PAHs) are widespread, persistent, and toxic environmental pollutants. Many anthropogenic and some natural factors contribute to the spread and accumulation of PAHs in aquatic and soil systems. The effective and environmentally friendly remediation of these chemical compounds is an important and challenging problem that has kept scientists busy over the last few decades. This review briefly summarizes data on the main sources of PAHs, their toxicity to living organisms, and physical and chemical approaches to the remediation of PAHs. The basic idea behind existing approaches to the bioremediation of PAHs is outlined with an emphasis on a detailed description of the use of bacterial strains as individual isolates, consortia, or cell-free enzymatic agents. [ABSTRACT FROM AUTHOR]

The design of eco‐friendly active food packaging systems based on biobased polymeric materials is a growing field of research because of the pressing concern for sustainable development. Herein, monolayer ternary thermoplastic films composed of poly(lactic acid) (PLA), gallic acid (GA, 2.5% w/w relative to PLA), and a plasticizer (poly(ethylene glycol) [PEG] or epoxidized linseed oil [ELO], 5.0 and 7.5% w/w relative to PLA) are prepared via melt‐mixing followed by compression molding. The ensuing plasticized and self‐standing PLA/GA films are translucent and have good mechanical properties (Young's modulus ~2 GPa) and welding performance. The incorporation of GA yields films with ultraviolet‐light barrier properties (transmittance below 40%, 200–400 nm), antioxidant capacity (radical scavenging activity above 94%), and antibacterial activity against the methicillin‐resistant strain of Staphylococcus aureus (minimum of 3‐log reduction colony forming units mL−1). These thermoplastic films are easily degradable via enzymatic degradation with proteinase K from Tritirachium album, reaching weight loss values of 100% after 9 days. The films plasticized with PEG present slightly better antibacterial action and enzymatic degradation, whereas those plasticized with ELO exhibit marginally higher surface hydrophobicity and thermal stability. Thus, the combination between PLA and GA yielded biobased films with bioactive properties that have potential for application in active food packaging. [ABSTRACT FROM AUTHOR]

In recent years, the demand for sustainable and degradable materials and electronic devices has increased significantly. Among a range of biodegradable polymers, poly(lactic acid) (PLA) is a good alternative to conventional petrol-based polymers because of its attractive mechanical properties and its easy processability. Recently, PLA has also been described as a promising dielectric material with piezoelectric and electret properties. We expect that PLA—after further optimization—will play an important role as a material for environmentally friendly sensors in the future, where first applications such as air filters and pressure sensors have already been proposed. However, degradation under normal ambient conditions is very slow, and an accelerated and controllable degradation process is highly desirable for any type of PLA-based sensors. Enzymatic hydrolysis with embedded enzymes has been proposed as an approach to accelerate and control degradation. In this work, we investigate the properties of PLA in terms of dielectric and mechanical properties with a focus on its ability to store charges after the enzyme proteinase K (Trit. album) has been incorporated. Results reveal that proteinase K has a positive effect on the charge stability of solvent-cast PLA electrets after complete evaporation of the solvent. Furthermore, we observed a concentration-dependent acceleration of mass loss in a Tris-HCl buffer. A fast degradation within only one day occurred at a concentration of 6 wt% proteinase K. [ABSTRACT FROM AUTHOR]

Plastic pollution has become a global problem since the extensive use of plastic in industries such as packaging, electronics, manufacturing and construction, healthcare, transportation, and others. This has resulted in an environmental burden that is continually growing, which has inspired many scientists as well as environmentalists to come up with creative solutions to deal with this problem. Numerous studies have been reviewed to determine practical, affordable, and environmentally friendly solutions to regulate plastic waste by leveraging microbes' innate abilities to naturally decompose polymers. Enzymatic breakdown of plastics has been proposed to serve this goal since the discovery of enzymes from microbial sources that truly interact with plastic in its naturalistic environment and because it is a much faster and more effective method than others. The scope of diverse microbes and associated enzymes in polymer breakdown is highlighted in the current review. The use of co-cultures or microbial consortium-based techniques for the improved breakdown of plastic products and the generation of high-value end products that may be utilized as prototypes of bioenergy sources is highlighted. The review also offers a thorough overview of the developments in the microbiological and enzymatic biological degradation of plastics, as well as several elements that impact this process for the survival of our planet. [ABSTRACT FROM AUTHOR]

In the present study, a new degraded konjac glucomannan (DKGM) was prepared using a crude enzyme from abalone (Haliotis discus hannai) viscera, and its physicochemical properties were investigated. After enzymatic hydrolysis, the viscosity of KGM obviously decreased from 15,500 mPa·s to 398 mPa·s. The rheological properties analysis of KGM and DKGMs revealed that they were pseudoplastic fluids, and pseudoplasticity, viscoelasticity, melting temperature, and gelling temperature significantly decreased after enzymatic hydrolysis, especially for KGM-180 and KGM-240. In addition, the molecular weight of KGM decreased from 1.80 × 106 Da, to 0.45 × 106 Da and the polydispersity index increased from 1.17 to 1.83 after 240 min of degradation time. Compared with natural KGM, the smaller particle size distribution of DKGM further suggests enzyme hydrolysis reduces the aggregation of molecular chains with low molecular weight. FT-IR and FESEM analyses showed that the fragmented KMG chain did not affect the structural characteristics of molecular monomers; however, the dense three-dimensional network microstructure formed by intermolecular interaction changed to fragment microstructure after enzyme hydrolysis. These results revealed that the viscosity and rheological properties of KGM could be controlled and effectively changed using crude enzymes from abalone viscera. This work provides theoretical guidance for the promising application of DKGM in the food industry. [ABSTRACT FROM AUTHOR]

Resulting properties of cotton and polyester blends make polycotton the most common fabric in textile industry. Separation technologies are key for the chemical processing of the massive amount of polycotton waste produced worldwide. The very different chemical nature of cellulose and polyethylene terephthalate determines the fractionation strategies to obtain two valuable monomaterial streams. In this work, we propose separation pathways seeking the conversion both polymers. First, polyester was depolymerised into its monomeric units through catalytic alkaline hydrolysis. The combined effect of alkali concentration and the catalyst was analysed to overcome the hydrophobic nature of polyester and optimise its conversion rate minimising the damaged caused to the cellulose chains. Conversion rates up to 80% were reached in a single separation stage with a limited effect of the polymer chain distribution of cellulose which remains a fiber-grade feedstock. Alternatively, cellulose was fully removed by selective dissolution in ionic solvent and subsequent filtration resulting in a spinnable mixture. Finally, enzymatic treatments for the conversion of cellulose into fermentable sugars were studied. Single stage conversions of 65% were achieved after maximizing the enzymatic activity. Structural and spectroscopic analysis showed that crystalline domains of textile-grade cotton limit the enzymatic activity. Optimal fractionation process is, in our view, highly context dependent what conveys to seek a variety of alternatives seeking for chemical processes driven by the ulterior up-cycling of the monomaterial streams [ABSTRACT FROM AUTHOR]

A variety of important agricultural crops host fungi from the Aspergillus genus can produce cancerogenic secondary metabolites such as aflatoxins. Consequently, novel strategies for detoxification and their removal from food and feed chains are required. Here, detoxification of Aflatoxin B1 (AFB1) by the Bacillus subtilis multi-copper oxidase CotA (BsCotA) was investigated. This laccase was recombinantly produced in E. coli while codon optimization led to duplication of the amount of active protein obtained. CuCl2 was added to the cultivation medium leading to a 25-fold increase of Vmax corresponding to improved incorporation of Cu2+ into the enzyme protein which is essential for the catalytic reaction. To avoid potential cytotoxicity of Cu2+, cultivation was performed at microaerobic conditions indeed leading to 100x more functional protein when compared to standard aerobic conditions. This was indicated by an increase of Vmax from 0.30 ± 0.02 to 33.56 ± 2.02 U/mg. Degradation kinetics of AFB1 using HPLC with fluorescence detection (HPLC-FLD) analysis indicated a theoretical substrate saturation above solubility in water. At a relatively high concentration of 500 μg/L, AFB1 was decomposed at 10.75 μg/Lh (0.17 nmol*min−1*mg−1) at a dosage of 0.2 μM BsCotA. AFQ1 and epi-AFQ1 were identified as the initial oxidation products according to mass spectrometry (i.e., HPLC-MS, HPLC-QTOF). None of these molecules were substrates for laccase but both decomposed in buffer. However, decomposition does not seem to be due to hydration of the vinyl ether in the terminal furan ring. Genotoxicity of the formed AFB1 was assessed in several dilutions based on the de-repression of the bacterial SOS response to DNA damage indicating about 80-times reduction in toxicity when compared to AFQ1. The results of this study indicate that BsCotA has high potential for the biological detoxification of aflatoxin B1.

Drug addiction is a pervasive problem worldwide. It not only affects the abuser's life, but also poses a serious threat to public health. Accordingly, there is a strong demand for the development of novel and effective therapies for drug addiction. Considering that small-molecule drugs have only had limited success, there is great interest in developing alternative strategies that extend the reach of small-molecule-based therapies. The antibody-based trapping approach and the enzyme catalytic strategy have been considered as promising ways to reduce the euphoria of drug users by altering drug pharmacokinetics and decreasing drug concentrations in the central nervous system. However, these biological macromolecules are generally unstable and their in vivo half-lives are short. With the rapid development of gene editing technologies, it is possible to perform ex vivo gene therapy for the long-term and stable delivery of enzymes and other effector proteins, which could free abusers from frequent injections of therapeutics. By constructing programmed gene switches that regulate spatiotemporal gene expression in response to illicit drugs, this perspective proposed the concept of preventing drug addiction by the drug itself. This strategy enables the controlled release of therapeutic proteins in vivo and is expected to improve patient safety and compliance. This will open up new opportunities for next-generation medicine and hold great promise for expanding our ability to treat drug addiction. [ABSTRACT FROM AUTHOR]

Abstract Background The stability of resin–dentin interfaces is still highly questionable. The aim of this study was to evaluate the effect of Salvadora persica on resin–dentin bond durability. Materials and methods Extracted human third molars were used to provide mid-coronal dentin, which was treated with 20% Salvadora persica extract for 1 min after acid-etching. Microtensile bond strength and interfacial nanoleakage were evaluated after 24 h and 6 months. A three-point flexure test was used to measure the stiffness of completely demineralized dentin sticks before and after treatment with Salvadora persica extract. The hydroxyproline release test was also used to measure collagen degradation by endogenous dentin proteases. Statistical analysis was performed using two-way ANOVA followed by post hoc Bonferroni test and unpaired t-test. P-values 0.05). After 6 months, the bond strength of the control group decreased (p = 0.007), and nanoleakage increased (p = 0.006), while Salvadora persica group showed no significant difference in bond strength and nanoleakage compared to their 24 h groups (p > 0.05). Salvadora persica increased dentin stiffness and decreased collagen degradation (p

A versatile and robust end‐group derivatization approach using oximes has been developed for the detection of oxidative degradation of synthetic polyisoprenes and polybutadiene. This method demonstrates broad applicability, effectively monitoring degradation across a wide molecular weight range through ultraviolet (UV)‐detection coupled to gel permeation chromatography. Importantly, it enables the effective monitoring of degradation via derivatization‐induced UV‐maximum shifts, even in the presence of an excess of undegraded polyene, overcoming limitations previously reported with refractive index detectors. Notably, this oxime‐based derivatization methodology is used in enzymatic degradation experiments of synthetic polyisoprenes characterized by a cis: trans ratio with the rubber oxygenase LcpK30. It reveals substantial UV absorption in derivatized enzymatic degradation products of polyisoprene with molecular weights exceeding 1000 g mol−1 ‐ an unprecedented revelation for this enzyme's activity on such synthetic polyisoprenes. This innovative approach holds promise as a valuable tool for advancing research into the degradation of synthetic polyisoprenes and polybutadiene, particularly under conditions of low organocatalytic or enzymatic degradation activity. With its broad applicability and capacity to reveal previously hidden degradation processes, it represents a noteworthy contribution to sustainable polymer chemistry. [ABSTRACT FROM AUTHOR]

Livestock blood, typically considered a waste byproduct of the slaughter industry, has the potential to be a valuable resource in the environmental and agricultural industries owing to its high protein content. This study reports the mechanisms involved in developing a continuous process capable of processing 5 tons/day of livestock blood into high purity amino acid liquid fertilizer and dried protein feedstuff simultaneously. Large-scale processing units were fabricated for the ultrasonic pretreatment and solubilization of proteins, enzymatic degradation of dissolved proteins for amino acid conversion, solid-liquid separation using a membrane filter press to produce high purity amino acid liquid fertilizer, and microwave drying of the solid component to produce dry protein feedstuff. The main processing units were integrated into a continuous, efficient system. The final amino acid liquid fertilizer and dry protein feedstuff contained >20% amino acids and approximately 78% protein, respectively. An economic feasibility analysis of the integrated system based on an annual processing capacity of 3000 tons of livestock blood yielded a total annual profit of 17.4 million euros (5812 euros/ton). This study presents an efficient and profitable approach to repurposing the waste generated by slaughterhouses toward agriculture and feed production. [ABSTRACT FROM AUTHOR]

Orange peel and sugar beet pulp contain large quantities of pectin, which can be turned via galactaric acid into furan dicarboxylic acid (FDCA) and its esters. In this work, we show the polymerisation of these FDCA esters into high‐molecular‐weight, 70–100 kg/mol, poly(ethylene 2,5‐furanoate) (PEF). PEF is an emerging bio‐based alternative for poly(ethylene terephthalate) (PET), widely used in for example packaging applications. Closing the loop, we also demonstrated and confirmed that PEF can be hydrolysed by enzymes, which are known to hydrolyse PET, back into FDCA for convenient recycling and recovery of monomers. [ABSTRACT FROM AUTHOR]

Deoxynivalenol (DON) is the most widespread mycotoxin contaminant hazardous to human and animal health globally. It acts as a crucial virulence factor to stimulate the spread of pathogenic Fusarium within wheat plants. Control of DON and Fusarium disease contributes enormously to food safety, which relies on chemical fungicides. Here, we report the biodegradation of DON using a novel soil bacterium, Devosia insulae FS10-7, and its biocontrol effect against Fusarium crown rot. We demonstrated that strain FS10-7 degraded DON to 3-epi-DON by forming a 3-keto-DON intermediate. Such degradation activity can be maintained at a wide range of pH (4 to 10) and temperature (16 to 42°C) values under aerobic conditions. Notably, strain FS10-7 exhibited practical inhibitory effects on Fusarium crown rot disease caused by F. graminearum and F. pseudograminearum in the in vitro Petri dish test under laboratory conditions and the pot experiment under greenhouse conditions. The mechanisms underlying the biocontrol ability of strain FS10-7 were preliminarily investigated to be associated with its high DON-degrading activity rather than direct antagonism. These results establish the foundation to develop further bioagents capable of biodegrading mycotoxins in cereals and derived products and, accordingly, biocontrol plant diseases caused by DON-producing pathogens. [ABSTRACT FROM AUTHOR]

Background: The stability of resin–dentin interfaces is still highly questionable. The aim of this study was to evaluate the effect of Salvadora persica on resin–dentin bond durability. Materials and methods: Extracted human third molars were used to provide mid-coronal dentin, which was treated with 20% Salvadora persica extract for 1 min after acid-etching. Microtensile bond strength and interfacial nanoleakage were evaluated after 24 h and 6 months. A three-point flexure test was used to measure the stiffness of completely demineralized dentin sticks before and after treatment with Salvadora persica extract. The hydroxyproline release test was also used to measure collagen degradation by endogenous dentin proteases. Statistical analysis was performed using two-way ANOVA followed by post hoc Bonferroni test and unpaired t-test. P-values < 0.05 were considered statistically significant. Results: The use of Salvadora persica as an additional primer with etch-and-rinse adhesive did not affect the immediate bond strengths and nanoleakage (p > 0.05). After 6 months, the bond strength of the control group decreased (p = 0.007), and nanoleakage increased (p = 0.006), while Salvadora persica group showed no significant difference in bond strength and nanoleakage compared to their 24 h groups (p > 0.05). Salvadora persica increased dentin stiffness and decreased collagen degradation (p < 0.001) compared to their controls. Conclusion: Salvadora persica extract pretreatment of acid-etched dentin preserved resin–dentin bonded interface for 6 months. Clinical significance: Durability of resin-dentin bonded interfaces is still highly questionable. Endogenous dentinal matrix metalloproteinases play an important role in degradation of dentinal collagen within such interfaces. Salvadora persica may preserve resin-dentin interfaces for longer periods of time contributing to greater clinical success and longevity of resin composite restorations. [ABSTRACT FROM AUTHOR]

Heavy crude oil (HCO) and extra-heavy crude oil (EHCO) with high viscosity and density pose enormous challenges to the exploitation of oil reserves. While bacteria are increasingly used in biocatalytic upgrading of HCO and EHCO, less attention has been paid to the potential of fungi. The aim of this study was to ascertain the role of fungal extracellular enzymes from Aspergillus spp. In the biodegradation of EHCO and their application potential for enhanced oil recovery. A. terreus HJ2 and A. nidulans HJ4 with the ability to biodegrade HCO were previously isolated from bitumen enrichment cultures. Both strains grew well on EHCO agar plates supplemented with a small amount of soluble starch (0.2%) and yeast extract (0.3%). Extracellular enzymes from each strain separately, as well as mixtures of the enzymes, exhibited EHCO degradation activity, leading to redistribution of hydrocarbons with substantial formation of biogases and organic acids in a 7-day period. Enzymatic degradation resulted in decreased contents of resins and asphaltenes, accompanied by increased contents of saturates and aromatics. Gas chromatography–mass spectrometry revealed distinct redistribution patterns of n-alkane in the biotreated oil. Enzymatic degradation additionally caused considerable reduction in oil viscosity (by 12.7%) and heavy metal concentrations (Ni, by 44.1%; Fe, by 54.0%; V, by 31.6%). The results provide empirical evidence for the application potential of fungal extracellular enzymes from Aspergillus spp. in EHCO recovery and biocatalytic upgrading of EHCO.

Livestock blood, a major organic waste generated by the livestock industry, poses a risk of pollution due to its rapid decomposition. However, it is a potential protein source for agricultural purposes due to its protein-rich organic matter. In this study, we conducted studies on an eco-friendly, scalable, and effective protein degradation process using livestock blood to reduce waste and produce an amino acid liquid fertilizer that can be recycled for agricultural use. Ultrasonic technology was applied as a pretreatment method to improve the enzymatic hydrolysis efficiency of proteins in livestock blood, and the optimal conditions that led to 95.91% solubilization rate of hemoglobin were ultrasound duration for 30 min at an ultrasound density of 0.5 W/mL. As a result of hydrolyzing ultrasonically pretreated blood by mixing exo- and endo-type proteolytic enzymes, the optimal combination was a mixture of Savinase® 1% and Flavourzyme® 1%. After 4 h of reaction, the protein concentration was 27.8 mg/mL and the amino acid concentration was confirmed to be 54.6 mg/mL. This is about 4.2 times higher than the amino acid concentration of blood without ultrasound pretreatment, 13.1 mg/mL, and it was confirmed that sonication has a significant effect on improving protein degradation efficiency. As protein degradation increased, the viscosity of blood gradually decreased, suggesting that the physical force applied to the agitator torque diminished during the enzyme reaction; a significant correlation between protein and amino acid concentrations (biological factors) and torque (mechanical factor) was observed. Measuring torque during an enzyme reaction can confirm the extent of the enzyme reaction, so it can be used as an indicator of reaction progress when scaling up the process in the future. [ABSTRACT FROM AUTHOR]

Background: The abdominal aortic aneurysm (AAA) is defined as an increase in aortic diameter by more than 50% and is associated with a high risk of rupture and mortality without treatment. The aim of this study is to analyze the role of aortic adventitial collagen photocrosslinking by UV-A irradiation on the biomechanical profile of the aortic wall. Methods: This experimental study is structured in two parts: the first part includes in vitro uniaxial biomechanical evaluation of porcine adventitial tissue subjected to either short-term elastolysis or long-term collagenolysis in an attempt to duplicate two extreme situations as putative stages of aneurysmal degeneration. In the second part, we included biaxial biomechanical evaluation of in vitro human abdominal aortic adventitia and human AAA adventitia specimens. Biomechanical profiles were examined for porcine and human aortic tissue before and after irradiation with UV-A light (365 nm wavelength). Results: On the porcine aortic sample, the enhancing effect of irradiation was evident both on the tissue subjected to elastolysis, which had a high collagen-to-elastin ratio, and on the tissue subjected to prolonged collagenolysis despite being considerably depleted in collagen. Further, the effect of irradiation was conclusively demonstrated in the human adventitia samples, where significant post-irradiation increases in Cauchy stress (longitudinal axis: p = 0.001, circumferential axis: p = 0.004) and Young's modulus (longitudinal axis: p = 0.03, circumferential axis: p = 0.004) were recorded. Moreover, we have a stronger increase in the strengthening of the AAA adventitia samples following the exposure to UV-A irradiation (p = 0.007) and a statistically significant but not very important increase (p = 0.021) regarding the stiffness in the circumferential axis. Conclusions: The favorable effect of UV irradiation on the strength and stiffness of degraded aortic adventitia in experimental situations mimicking early and later stages of aneurysmal degeneration is essential for the development and potential success of procedures to prevent aneurysmal ruptures. The experiments on human normal and aneurysmal adventitial tissue confirmed the validity and potential success of a procedure based on exposure to UV-A radiation. [ABSTRACT FROM AUTHOR]

To enhance the degradation rate of poly (butylene adipate-co-terephthalate) (PBAT) in the natural environment and to investigate the effect of modified monomers on the molding and structure of copolyester fibers, a series of isosorbide modified PBAT (PBIAT) tetrapolyesters were synthesized and monofilaments were prepared by solid-state drawing in this work. The experimental results revealed that the introduction of isosorbide formed a partial block structure in the molecular chain, and that a significant improvement in the properties of heat resistance and degradability of the copolyester was observed with the introduction of isosorbide. In the research of fiber forming and structure-property relationship by isosorbide, it was found that although the monofilament orientation process was affected by the V-shape structure of isosorbide, the change of the crystal structure under stress was similar to that of polybutylene terephthalate (PBT). The PBIAT monofilaments showed a decrease in the strength at break affected by the introduction of isosorbide but they still met the requirements for textile applications.

Perfluoroalkyl acids (PFAAs) are considered forever chemicals, gaining increasing attention for their hazardous impacts. However, the ecological effects of PFAAs remain unclear. Environmental DNA (eDNA), as the environmental gene pool, is often collected for evaluating the ecotoxicological effects of pollutants. In this study, we found that all PFAAs investigated, including perfluorohexanoic acid, perfluorooctanoic acid, perfluorononanoic acid, and perfluorooctane sulfonate, even at low concentrations (0.02 and 0.05 mg/L), expedited the enzymatic degradation of DNA in a nonlinear dose–effect relationship, with DNA degradation fragment sizes being lower than 1,000 bp and 200 bp after 15 and 30 min of degradation, respectively. This phenomenon was attributed to the binding interaction between PFAAs and AT bases in DNA via groove binding. van der Waals force (especially dispersion force) and hydrogen bonding are the main binding forces. DNA binding with PFAAs led to decreased base stacking and right-handed helicity, resulting in loose DNA structure exposing more digestion sites for degrading enzymes, and accelerating the enzymatic degradation of DNA. The global ecological risk evaluation results indicated that PFAA contamination could cause medium and high molecular ecological risk in 497 samples from 11 contamination-hot countries (such as the USA, Canada, and China). The findings of this study show new insights into the influence of PFAAs on the environmental fates of biomacromolecules and reveal the hidden molecular ecological effects of PFAAs in the environment.

Polycyclic aromatic hydrocarbons (PAHs) are widespread, persistent, and toxic environmental pollutants. Many anthropogenic and some natural factors contribute to the spread and accumulation of PAHs in aquatic and soil systems. The effective and environmentally friendly remediation of these chemical compounds is an important and challenging problem that has kept scientists busy over the last few decades. This review briefly summarizes data on the main sources of PAHs, their toxicity to living organisms, and physical and chemical approaches to the remediation of PAHs. The basic idea behind existing approaches to the bioremediation of PAHs is outlined with an emphasis on a detailed description of the use of bacterial strains as individual isolates, consortia, or cell-free enzymatic agents.

The practical application of plastics is as indispensable as it is problematic regarding disposal. Plastics present significant opportunities in the context of circular usage and recycling. A circular economy dictates the utilization of every side stream to minimize waste. Current waste management techniques are insufficient in reducing plastic waste entering landfills, wastewater treatment systems, and the environment. Under these circumstances, plastic biodegradation has emerged as a viable and environmentally responsible approach to plastic pollution. Methods are needed for the natural degradation of plastics using microbes that can utilize plastics as their sole carbon source. Studies to enhance the catalytic activity of plastic-degrading enzymes through protein engineering approaches are a relatively new field of research. Enzymatic degradation for product creation represents a purely biological plastic recycling method in a sustainable economy. This review builds insights derived from previous studies and provides a brief overview of plastic degradation using enzymes, improvements in plastic-degrading enzyme efficiency, and stabilization via various protein engineering strategies. In addition, recent advances in plastic waste valorization technology based on systems metabolic engineering and future directions are discussed.

A promising strategy to counteract the progressing plastic pollution of the environment can involve the replacement of persistent plastics with biodegradable materials. Biodegradable polymers are enzymatically degradable by various hydrolytic enzymes. However, these materials can reach the environment in the same way as conventional plastics. Therefore, they are accessible to terrestrial, freshwater, and marine biota. Once ingested by marine organisms, highly active enzymes in their digestive tracts may break down biodegradable compounds. We incubated microparticles of five different biodegradable plastics, based on polylactictic acid (PLA), polybutylene succinate (PBS), polybutylene adipate terephthalate (PBAT) and polyhydroxybutyrate-co-valerate (PHBV), in-vitro with the gastric fluid of the edible crab Cancer pagurus and evaluated the hydrolysis rates by pH Stat titration. A plastic blend of PLA with PBAT showed the highest hydrolysis rate. The enzymes in the gastric fluid of crabs were separated by anion exchange chromatography. Fractions with carboxylesterase activity were identified using fluorescent methylumbelliferyl (MUF)-derivatives. Pooled fractions with high carboxylesterase activity also hydrolyzed a PLA/PBAT plastic blend. Carboxylesterases showed molecular masses of 40–45 kDa as determined by native gel electrophoresis (SDS-PAGE). Our study demonstrated that digestive carboxylesterases in the gastric fluid of C. pagurus exhibit a high potential for hydrolyzing certain biodegradable plastics. Since esterases are common in the digestive tract of organisms, it seems likely that other invertebrates possess the ability to hydrolyze biodegradable plastics.

ABSTRACT Cyclic lipopeptides (CLPs) are key bioactive secondary metabolites produced by some plant beneficial rhizobacteria such as Pseudomonas and Bacillus. They exhibit antimicrobial properties, promote induced systemic resistance in plants, and support key developmental traits, including motility, biofilm formation, and root colonization. However, our knowledge about the fate of lipopeptides once released in the environment and especially upon contact with neighboring rhizobacteria remains limited. Here, we investigated the enzymatic degradation of Bacillus and Pseudomonas cyclic lipopeptides by Streptomyces. We observed that Streptomyces venezuelae is able to degrade the three lipopeptides surfactin, iturin, and fengycin upon interaction with Bacillus velezensis in vitro and in planta according to specific mechanisms. S. venezuelae was also able to degrade the structurally diverse sessilin-, tolaasin-, orfamide-, xantholisin-, and putisolvin-type lipopeptides produced by Pseudomonas, indicating that this trait is likely engaged in the interaction with various competitors. Furthermore, the degradation of CLPs is associated with the release of free amino and fatty acids used by Streptomyces to sustain growth. Additionally, we hypothesize that lipopeptide-producing rhizobacteria and their biocontrol potential are impacted by the degradation of their lipopeptides as observed with the polarized motility of B. velezensis, avoiding the confrontation zone with Streptomyces and the loss of antifungal properties of degraded iturin. IMPORTANCE Here, we provide new insights into the possible fate of cyclic lipopeptides as prominent specialized metabolites from beneficial bacilli and pseudomonads once released in the soil. Our data illustrate how the B. velezensis lipopeptidome may be enzymatically remodeled by Streptomyces as important members of the soil bacterial community. The enzymatic arsenal of S. venezuelae enables an unsuspected extensive degradation of these compounds, allowing the bacterium to feed on these exogenous products via a mechanism going beyond linearization, which was previously reported as a detoxification strategy. As soils are carbon-rich and nitrogen-poor environments, we propose a new role for cyclic lipopeptides in interspecies interactions, which is to fuel the nitrogen metabolism of a part of the rhizosphere microbial community. Streptomyces and other actinomycetes, producing numerous peptidases and displaying several traits of beneficial bacteria, should be at the front line to directly benefit from these metabolites as “public goods” for microbial cooperation.

Biotechnology offers the potential for selective depolymerization of natural and synthetic fibers, isolation of components, or recovery of monomers. This progress solves the problems associated with the regeneration of monomers from synthetic fiber blends, especially when contaminated or mixed fibers are involved. In addition, the recycling of used fiber products into higher-value products not only keeps waste out of landfills but also creates economic opportunities and reduces the need to produce new synthetic fibers. Synthetic fibers can be recovered by mechanical or chemical recycling, but biotechnological solutions with enzymes offer a more environmentally friendly alternative to harsh chemicals by selectively breaking down certain chemical bonds in polymers to obtain purer monomeric building blocks. Efficient biotechnological recycling, however, depends on the specific polymer, as different enzymes, microbial colonies, fungal hyphae, etc. can process different man-made fibers. Challenges arise with any type of fiber recovery, including enzymatic degradation when suitable enzymes have not yet been discovered or when fiber blends impede accessibility and efficiency. This short review provides an overview of the possibilities of biotechnological solutions for synthetic fiber recovery. [ABSTRACT FROM AUTHOR]

This study aimed to investigate the behavior of chitosan/quaternized chitosan fibers in media mimicking wound exudates to understand their capacities as wound dressing. Fiber analysis of the fibers using dynamic vapor sorption proved their ability to adsorb moisture up to 60% and then to desorb it as a function of humidity, indicating their outstanding breathability. Dissolution analyses showed that quaternized chitosan leached from the fibers in water and PBS, whereas only small portions of chitosan were solubilized in water. In media containing lysozyme, the fibers degraded with a rate determined by their composition and pH, reaching a mass loss of up to 47% in media of physiologic pH. Notably, in media mimicking the wound exudate during healing, they adsorbed moisture even when their mass loss due to biodegradation was high, whereas they were completely degraded in the media of normal tissues, indicating bioabsorbable dressing capacities. A mathematical model was constructed, which characterized the degradation rate and morphology changes of chitosan/quaternized chitosan fibers through analyses of dynamics in scale space, using the Theory of Scale Relativity. The model was validated using experimental data, making it possible to generalize it to the degradation of other biopolymeric systems that address wound healing. [ABSTRACT FROM AUTHOR]

Currently, special attention is being paid to research on the use of residual biomass of Aspergillus fungi as a substrate for the production of food and feed ingredients. The most promising method is biocatalytic conversion of mycelial biomass polymers, which increases the availability of biologically valuable cell components. The objective of the present study to develop conditions for the enzymatic destruction of cell wall polysaccharides and protein substances of fungal biomass and secondary raw materials of enzyme production, to obtain peptide-amino acid ingredients. It has been established that the use of the enzymatic system, including intracellular proteinases and peptidases and a complex of exogenous β-glucanases, as well as regulation of the duration of their exposure, provide for the production of fermentolysates with a given structural fractional composition. Molecular mass (MM) distribution studies of peptide fractions in the fungal biomass of fermentolysates showed that over 6 h of hydrolysis, the proportion of peptides with MM over 29.0 kDa decreased by 2.8 times, and over 12 h, by 4.7 times. The content of low molecular weight peptides with MM less than 1.6 kDa increased 1.4 times, which accounted for 47.9% of the total. Comparative analysis of the spectra of peptides with MM less than 1000 Da in enzyme isolates of fungal biomass after 6 and 12 h of hydrolysis showed significant differences in their compositions. The contents of peptides with MM less than 500 Da and of free amino acids increase with an increase in hydrolysis duration by 1.6 times. The results confirm the promise of creating functional ingredients and dietary supplements enriched in a peptide–amino acid component with a predominant content of free amino acids and short bioactive peptides resulting from enzymatic treatment of fungal biomass. [ABSTRACT FROM AUTHOR]

Polyethylene (PE) is a convenient and inexpensive polymer that is widely used in daily life. However, PE products are recalcitrant to degradation in the environment, leading to increasing plastic pollution. This has inspired the search for effective microorganisms and enzymes that can biodegrade PE. In this study, a fungal strain that degrades PE was isolated from soil contaminated with plastic and identified as Trichoderma harzianum. The strain was cultured with PE as the sole carbon source for 30 days, and the weight loss of PE particles was 3.39 ± 0.3%. Scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectra showed holes and oxygenated functional groups on the surface of the degraded PE particles. Gas chromatography–mass spectrometry (GC–MS) detected products with different carbon atom numbers. In addition, a potential PE degrading enzyme was screened from T. harzianum and identified as laccase. After PE was incubated with the recombinant laccase for 96 h, SEM, FTIR, and GC–MS showed the degradation of PE particles. The results showed that T. harzianum had the ability to degrade PE, which probably was attributed to the laccase produced by this strain. This study contributes promising tools for the degradation of PE enzyme. [ABSTRACT FROM AUTHOR]

Volumizing fillers aim to create or restore facial volume in fat layers. To provide strong tissue lifting and long-term persistence, gels are generally designed with stiff properties, characterized by a high storage modulus (G′). However, clinical evidence shows a discrepancy between high G′ and good lifting capacities, especially after skin tension has been exerted on the gel. To better explore the in vivo behavior of a gel, we first evaluated the elastic moduli of five commercial volumizers (RHA4, JUVVOL, RESVOL, RESLYFT, and BELVOL) in dynamic compression mode, E′. We further developed a Projection Index score based on the rheological assessment of creep in compression to mimic skin tension-induced stress relaxation (flattening). Finally, the ability of a gel to resist enzymatic degradation was analyzed with a multidose approach. Despite similar clinical indications, volumizers exhibited distinct behaviors. RHA4 and BELVOL showed the highest E′ values (resistance to strain), RHA4, JUVVOL, and RESVOL exhibited the greatest projection capacities, while JUVVOL and RHA4 offered the largest persistence to enzymatic degradation. In this article, we introduce the use of the Projection Index to efficiently assess the ability of a gel to lift tissues, thus increasing preclinical models' efficiency and reducing the need for animal studies. [ABSTRACT FROM AUTHOR]

Complexation can be utilized to modify starch properties. In this study, tapioca starch–methyl myristate (SM) complexes are prepared by mixing tapioca starch and methyl myristate (MM) in water at 90 °C. The MM amount is varied at 1%–10% w/w to study its effects on the complexes' physicochemical properties, which are characterized using spectroscopic, thermal, crystallinity, particle size, and microscopic analyses. The complexes are stable crystalline materials, as iodine cannot replace complexed MM. In water, these complexes aggregate to form two different sizes of 29.5–162.7 nm (23%–58% population) and 711.2–7086.7 nm (42%–77% population), which melt at 90–95 °C. Solid complexes form porous morphologies, which start degrading at 260.3–263.4 °C, indicating high thermal stability. An in vitro digestibility study using α‐amylase shows that the higher the MM amount is, the slower the starch degradation. At 120 min digestion time, the complexes produce 11%–16% lower reducing sugar than native starch (S). This shows that starch complexation with MM complexes can produce starch materials with slower digestibility. For the kinetic analysis, the Weibull model fits better than the exponential model for analyzing the digestion kinetics of SM complexes by the α‐amylase enzyme. [ABSTRACT FROM AUTHOR]