Search

Pramipexole (PMXL) belongs to the benzothiazole class of aromatic compounds and is used in treating Parkinson's disease; however, overdosage leads to some abnormal effects that could trigger severe side effects. Therefore, it demands a sensitive analytical tool for trace level detection. In this work, we successfully developed an electrochemical sensor for the trace level detection of PMXL, using the voltammetric method. For the analysis, graphitic carbon nitride (gCN) was opted and synthesized by using a high-temperature thermal condensation method. The synthesized nanoparticles were employed for surface characterization, using transmission electron microscopy (TEM), X-ray diffraction (XRD), and atomic force microscopy (AFM) techniques. The electrochemical characterization of the material was evaluated by using the electrochemical impedance spectroscopy (EIS) technique to evaluate the solution–electrode interface property. The cyclic voltammetry (CV) behavior of PMXL displayed an anodic peak in the forward scan, indicating that PMXL underwent electrooxidation, and an enhanced detection peak with lower detection potential was achieved for gCN-modified carbon paste electrode (gCN·CPE). The influence of different parameters on the electrochemical behavior was analyzed, revealing the diffusion governing the electrode process with an equal number of hydronium ions and electron involvement. For the fabricated gCN·CPE, good linearity range was noticed from 0.05 to 500 µM, and a lower detection limit (LD) of 0.012 µM was achieved for the selected concentration range (0.5 to 30 µM). Selectivity of the electrode in PMXL detection was investigated by conducting an interference study, while the tablet sample analysis demonstrates the sensitive and real-time application of the electrode. The good recovery values for the analysis illustrate the efficiency of the electrode for PMXL analysis. [ABSTRACT FROM AUTHOR]

Pramipexole (PMXL) belongs to the benzothiazole class of aromatic compounds and is used in treating Parkinson’s disease; however, overdosage leads to some abnormal effects that could trigger severe side effects. Therefore, it demands a sensitive analytical tool for trace level detection. In this work, we successfully developed an electrochemical sensor for the trace level detection of PMXL, using the voltammetric method. For the analysis, graphitic carbon nitride (gCN) was opted and synthesized by using a high-temperature thermal condensation method. The synthesized nanoparticles were employed for surface characterization, using transmission electron microscopy (TEM), X-ray diffraction (XRD), and atomic force microscopy (AFM) techniques. The electrochemical characterization of the material was evaluated by using the electrochemical impedance spectroscopy (EIS) technique to evaluate the solution–electrode interface property. The cyclic voltammetry (CV) behavior of PMXL displayed an anodic peak in the forward scan, indicating that PMXL underwent electrooxidation, and an enhanced detection peak with lower detection potential was achieved for gCN-modified carbon paste electrode (gCN·CPE). The influence of different parameters on the electrochemical behavior was analyzed, revealing the diffusion governing the electrode process with an equal number of hydronium ions and electron involvement. For the fabricated gCN·CPE, good linearity range was noticed from 0.05 to 500 µM, and a lower detection limit (LD) of 0.012 µM was achieved for the selected concentration range (0.5 to 30 µM). Selectivity of the electrode in PMXL detection was investigated by conducting an interference study, while the tablet sample analysis demonstrates the sensitive and real-time application of the electrode. The good recovery values for the analysis illustrate the efficiency of the electrode for PMXL analysis.

• FT's cyclic voltammetry response at planar and porous modified electrode is simulated. • Simulations reveal the occurrence of thin-layer effects at porous modified electrode. • Cyclic voltammetry experiment validates the simulation results. Planar bare electrodes fabricated with surface-modified multiwalled carbon nanotubes (MWCNT) are used to detect organophosphate (OP) compounds, which are used as herbicides and fungicides but are harmful to human health. Deposition of carbon nanotubes on the surfaces of bare electrodes enhances electrocatalysis, increasing the electrode to analyte current response and narrowing peak-to-peak potential separation during cyclic voltammetry (CV). We hypothesize that, as the thickness of the deposited MWCNT layer decreases, Fenitrothion (FT, an OP) mass transport between the layers of porous multiwalled carbon nanotubes changes from semi-infinite to thin-layer diffusion. This influences the electrode electrochemical response to the analyte. Using simulations and experiments, we show that when porous MWCNT are deposited on a conductive glassy carbon electrode the mass transport of FT changes from semi-infinite to thin-layer diffusion during CV. This alters the electrochemical response of the electrode and reduces peak-to-peak potential separation. To simulate CV response to multi-step and multi-electron electrochemical reactions of FT, both the semi-infinite and thin-layer diffusion models are employed for the planar bare and modified porous surface electrodes. The transition from thin layer to semi-infinite diffusion is clear when the nanotube layer thickness on the bare electrode increases. The model is applicable to other toxic chemicals, such as 4-nitrophenol, parathion, or methyl parathion that have similar electrode kinetics. [ABSTRACT FROM AUTHOR]