Search

Decellularization is a process to harvest the decellularized extra cellular matrix (dECM) that helps develop 3D scaffolds which mimic the native tissue composition. The decellularized tissues retain the structural and functional properties of the extracellular matrix (ECM) by an efficient decellularization process that retains tissue-specific biochemical and biophysical cues for tissue regeneration. In this study, we report an injection-based decellularization method, without perfusion setup. This study also compares the efficiency of the proposed protocol in the two animal models viz rat and mice. This method harvests rat and mice liver dECM using ethylenediamine tetra acetic acid (EDTA) and sodium dodecyl sulphate (SDS) within 08 h and 02 h respectively and preserved significant amount of ECM proteins. We reported that the harvested mice decellularized extracellular matrix (mdECM) and rat decellularized extracellular matrix (rdECM) had significant reduction in their DNA content (∼97%) and retained structural architecture resembling their native tissue counterparts. The total protein content retained in mdECM was ∼39% while that retained in rdECM was ∼65%. It was also found that the sGAG (sulphated glycosaminoglycan) content showed a no List of Figures. [ABSTRACT FROM AUTHOR]

Decellularization is a process to harvest the decellularized extra cellular matrix (dECM) that helps develop 3D scaffolds which mimic the native tissue composition. The decellularized tissues retain the structural and functional properties of the extracellular matrix (ECM) by an efficient decellularization process that retains tissue-specific biochemical and biophysical cues for tissue regeneration. In this study, we report an injection-based decellularization method, without perfusion setup. This study also compares the efficiency of the proposed protocol in the two animal models viz rat and mice. This method harvests rat and mice liver dECM using ethylenediamine tetra acetic acid (EDTA) and sodium dodecyl sulphate (SDS) within 08 h and 02 h respectively and preserved significant amount of ECM proteins. We reported that the harvested mice decellularized extracellular matrix (mdECM) and rat decellularized extracellular matrix (rdECM) had significant reduction in their DNA content (∼97%) and retained structural architecture resembling their native tissue counterparts. The total protein content retained in mdECM was ∼39% while that retained in rdECM was ∼65%. It was also found that the sGAG (sulphated glycosaminoglycan) content showed a no List of Figures.

Abstract Liver disease cases are rapidly expanding worldwide, and transplantation remains the only effective cure for end-stage disease. There is an increasing demand for developing potential drug treatments, and regenerative therapies using in-vitro culture platforms. Human decellularized extracellular matrix (dECM) is an appealing alternative to conventional animal tissues as it contains human-specific proteins and can serve as scaffolding materials. Herein we exploit this with human donor tissue from discarded liver which was not suitable for transplant using a synergistic approach to combining biological and topographical cues in electrospun materials as an in-vitro culture platform. To realise this, we developed a methodology for incorporating human liver dECM into electrospun polycaprolactone (PCL) fibres with surface nanotopographies (230–580 nm). The hybrid scaffolds were fabricated using varying concentrations of dECM; their morphology, mechanical properties, hydrophilicity and stability were analysed. The scaffolds were validated using HepG2 and primary mouse hepatocytes, with subsequent results indicating that the modified scaffolds-maintained cell growth and influenced cell attachment, proliferation and hepatic-related gene expression. This work demonstrates a novel approach to harvesting the potential from decellularized human tissues in the form of innovative in-vitro culture platforms for liver.

Liver disease cases are rapidly expanding worldwide, and transplantation remains the only effective cure for end-stage disease. There is an increasing demand for developing potential drug treatments, and regenerative therapies using in-vitro culture platforms. Human decellularized extracellular matrix (dECM) is an appealing alternative to conventional animal tissues as it contains human-specific proteins and can serve as scaffolding materials. Herein we exploit this with human donor tissue from discarded liver which was not suitable for transplant using a synergistic approach to combining biological and topographical cues in electrospun materials as an in-vitro culture platform. To realise this, we developed a methodology for incorporating human liver dECM into electrospun polycaprolactone (PCL) fibres with surface nanotopographies (230–580 nm). The hybrid scaffolds were fabricated using varying concentrations of dECM; their morphology, mechanical properties, hydrophilicity and stability were analysed. The scaffolds were validated using HepG2 and primary mouse hepatocytes, with subsequent results indicating that the modified scaffolds-maintained cell growth and influenced cell attachment, proliferation and hepatic-related gene expression. This work demonstrates a novel approach to harvesting the potential from decellularized human tissues in the form of innovative in-vitro culture platforms for liver. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Donghua University (English Edition) is the property of Journal of Donghua University Editorial Board and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Preserving the functionality of hepatocytes in vitro poses a significant challenge in liver tissue engineering and bioartificial liver, as these cells rapidly lose their metabolic and functional characteristics after isolation. Inspired by the macroporous structures found in native liver tissues, here we develop synthetic hydrogel scaffolds that closely mimic the liver's structural organization through the phase separation between polyethylene glycol (PEG) and polysaccharides. Our hydrogels exhibit interconnected macroporous structures and appropriate mechanical properties, providing an optimal microenvironment conducive to hepatocyte adhesion and the formation of sizable aggregates. Compared to two-dimensional hepatocyte cultures, enhanced functionalities of hepatocytes cultured in our macroporous hydrogels were observed for 14 days, as evidenced by quantitative reverse-transcription–polymerase chain reactions (qRT-PCR), immunofluorescence, and enzyme linked immunosorbent assay (ELISA) analyses. Protein sequencing data further confirmed the establishment of cell-cell interactions among hepatocytes when cultured in our hydrogels. Notably, these hepatocytes maintained a protein expression lineage that closely resembled freshly isolated hepatocytes, particularly in the Notch and tumor necrosis factor (TNF) signaling pathways. These results suggest that the macroporous hydrogels are attractive scaffolds for liver tissue engineering. [ABSTRACT FROM AUTHOR]

Acute and chronic liver diseases cause significant morbidity and mortality worldwide, affecting millions of people. Liver transplantation is the primary intervention method, replacing a non-functional liver with a functional one. However, the field of liver transplantation faces challenges such as donor shortage, postoperative complications, immune rejection, and ethical problems. Consequently, there is an urgent need for alternative therapies that can complement traditional transplantation or serve as an alternative method. In this review, we explore the potential of liver tissue engineering as a supplementary approach to liver transplantation, offering benefits to patients with severe liver dysfunctions.

The cell spheroid technology, which greatly enhances cell-cell interactions, has gained significant attention in the development of in vitro liver models. However, existing cell spheroid technologies still have limitations in improving hepatocyte-extracellular matrix (ECM) interaction, which have a significant impact on hepatic function. In this study, we have developed a novel bioprinting technology for decellularized ECM (dECM)-incorporated hepatocyte spheroids that could enhance both cell-cell and -ECM interactions simultaneously. To provide a biomimetic environment, a porcine liver dECM-based cell bio-ink was developed, and a spheroid printing process using this bio-ink was established. As a result, we precisely printed the dECM-incorporated hepatocyte spheroids with a diameter of approximately 160–220 μm using primary mouse hepatocyte (PMHs). The dECM materials were uniformly distributed within the bio-printed spheroids, and even after more than 2 weeks of culture, the spheroids maintained their spherical shape and high viability. The incorporation of dECM also significantly improved the hepatic function of hepatocyte spheroids. Compared to hepatocyte-only spheroids, dECM-incorporated hepatocyte spheroids showed approximately 4.3- and 2.5-fold increased levels of albumin and urea secretion, respectively, and a 2.0-fold increase in CYP enzyme activity. These characteristics were also reflected in the hepatic gene expression levels of ALB, HNF4A, CPS1, and others. Furthermore, the dECM-incorporated hepatocyte spheroids exhibited up to a 1.8-fold enhanced drug responsiveness to representative hepatotoxic drugs such as acetaminophen, celecoxib, and amiodarone. Based on these results, it can be concluded that the dECM-incorporated spheroid printing technology has great potential for the development of highly functional in vitro liver tissue models for drug toxicity assessment.

In recent studies, liver decellularized extracellular matrix (dECM)-based bioinks have gained significant attention for their excellent compatibility with hepatocytes. However, their low printability limits the fabrication of highly functional liver tissue. In this study, a new liver dECM–gelatin composite bioink (dECM gBioink) was developed to overcome this limitation. The dECM gBioink was prepared by incorporating a viscous gelatin mixture into the liver dECM material. The novel dECM gBioink showed 2.44 and 10.71 times higher bioprinting resolution and compressive modulus, respectively, than a traditional dECM bioink. In addition, the new bioink enabled stable stacking with 20 or more layers, whereas a structure printed with the traditional dECM bioink collapsed. Moreover, the proposed dECM gBioink exhibited excellent hepatocyte and endothelial cell compatibility. At last, the liver lobule mimetic structure was successfully fabricated with a precisely patterned endothelial cell cord-like pattern and primary hepatocytes using the dECM gBioink. The fabricated lobule structure exhibited excellent hepatic functionalities and dose-dependent responses to hepatotoxic drugs. These results demonstrated that the gelatin mixture can significantly improve the printability and mechanical properties of the liver dECM materials while maintaining good cytocompatibility. This novel liver dECM gBioink with enhanced 3D printability and resolution can be used as an advanced tool for engineering highly functional liver tissues. [ABSTRACT FROM AUTHOR]

The liver is one of the vital organs in the body, and the gold standard of treatment for liver function impairment is liver transplantation, which poses many challenges. The specific three‐dimensional (3D) structure of liver, which significantly impacts the growth and function of its cells, has made biofabrication with the 3D printing of scaffolds suitable for this approach. In this study, to investigate the effect of scaffold geometry on the performance of HepG2 cells, poly‐lactic acid (PLA) polymer was used as the input of the fused deposition modeling (FDM) 3D‐printing machine. Samples with simple square and bioinspired hexagonal cross‐sectional designs were printed. One percent and 2% of gelatin coating were applied to the 3D printed PLA to improve the wettability and surface properties of the scaffold. Scanning electron microscopy pictures were used to analyze the structural properties of PLA–Gel hybrid scaffolds, energy dispersive spectroscopy to investigate the presence of gelatin, water contact angle measurement for wettability, and weight loss for degradation. In vitro tests were performed by culturing HepG2 cells on the scaffold to evaluate the cell adhesion, viability, cytotoxicity, and specific liver functions. Then, high‐precision scaffolds were printed and the presence of gelatin was detected. Also, the effect of geometry on cell function was confirmed in viability, adhesion, and functional tests. The albumin and urea production of the Hexagonal PLA scaffold was about 1.22 ± 0.02‐fold higher than the square design in 3 days. This study will hopefully advance our understanding of liver tissue engineering toward a promising perspective for liver regeneration. [ABSTRACT FROM AUTHOR]

Liver transplantation is currently the only curative therapy for patients with acute or chronic liver failure. However, a dramatic gap between the number of available liver grafts and the number of patients on the transplantation waiting list emphasizes the need for valid liver substitutes. Whole-organ engineering is an emerging field of tissue engineering and regenerative medicine. It aims to generate transplantable and functional organs to support patients on transplantation waiting lists until a graft becomes available. It comprises two base technologies developed in the last decade; (1) organ decellularization to generate a three-dimensional (3D) extracellular matrix scaffold of an organ, and (2) scaffold recellularization to repopulate both the parenchymal and vascular compartments of a decellularized organ. In this review article, recent advancements in both technologies, in relation to liver whole-organ engineering, are presented. We address the potential sources of hepatocytes and non-parenchymal liver cells for repopulation studies, and the role of stem-cell-derived liver progeny is discussed. In addition, different cell seeding strategies, possible graft modifications, and methods used to evaluate the functionality of recellularized liver grafts are outlined. Based on the knowledge gathered from recent transplantation studies, future directions are summarized. [ABSTRACT FROM AUTHOR]

Hepatocyte encapsulation was proposed as a promising strategy, combined with the activation of liver regeneration. By preventing acute and chronic liver failure, it bridges the gap between patients on the waiting list and liver transplantation. Alginate is one of the most commonly employed hydrogels for encapsulating hepatocytes. Chelating ions, on the other hand, decrosslink alginate in vivo and ultimately induce cell death. This work aimed to increase the mechanical stability of alginate capsules and the specific cellular functions of hepatocytes in vivo and clinical applications by coating them with a chitosan shell. A one-step preparation process was used to produce chitosan-coated-alginate capsules. The liver-specific functions of encapsulated hepatocytes were evaluated. The results revealed that Alginate-25% chitosan (Chs25)-encapsulated hepatocytes had enhanced liver-specific functions, particularly urea and albumin secretion, compared to the control samples. In addition, reduced secretion of aspartate aminotransferase (AST) and lactate dehydrogenase (LDH) has been observed. A live/dead fluorescence assay was used to determine the viability of encapsulated hepatocytes, and the results showed that chitosan-coated-alginate capsules could provide a suitable environment for hepatocyte transport. Our findings suggest that Chs25 capsules maintained a larger population of functionally active hepatocytes for potential therapeutic applications, particularly hepatocyte transplantation in severe liver failure. [ABSTRACT FROM AUTHOR]

The major goal of liver tissue engineering is to reproduce the phenotype and functions of liver cells, especially primary hepatocytes ex vivo. Several strategies have been explored in the recent past for culturing the liver cells in the most apt environment using biological scaffolds supporting hepatocyte growth and differentiation. Nanofibrous scaffolds have been widely used in the field of tissue engineering for their increased surface-to-volume ratio and increased porosity, and their close resemblance with the native tissue extracellular matrix (ECM) environment. Electrospinning is one of the most preferred techniques to produce nanofiber scaffolds. In the current review, we have discussed the various technical aspects of electrospinning that have been employed for scaffold development for different types of liver cells. We have highlighted the use of synthetic and natural electrospun polymers along with liver ECM in the fabrication of these scaffolds. We have also described novel strategies that include modifications, such as galactosylation, matrix protein incorporation, etc., in the electrospun scaffolds that have evolved to support the long-term growth and viability of the primary hepatocytes. [ABSTRACT FROM AUTHOR]

Advances in biomaterials, particularly in combination with encapsulation strategies, have provided excellent opportunities to increase reproducibility and standardization for cell culture applications. Herein, hybrid microcapsules are produced in a flow-focusing microfluidic droplet generator combined with enzymatic outside-in crosslinking of dextran-tyramine, enriched with human liver extracellular matrix (ECM). The microcapsules provide a physiologically relevant microenvironment for the culture of intrahepatic cholangiocyte organoids (ICO) and patient-derived cholangiocarcinoma organoids (CCAO). Micro-encapsulation allowed for the scalable and size-standardized production of organoids with sustained proliferation for at least 21 days in vitro. Healthy ICO (n = 5) expressed cholangiocyte markers, including KRT7 and KRT19, similar to standard basement membrane extract cultures. The CCAO microcapsules (n = 3) showed retention of stem cell phenotype and expressed LGR5 and PROM1. Furthermore, ITGB1 was upregulated, indicative of increased cell adhesion to ECM in microcapsules. Encapsulated CCAO were amendable to drug screening assays, showing a dose-response response to the clinically relevant anti-cancer drugs gemcitabine and cisplatin. High-throughput drug testing identified both pan-effective drugs as well as patient-specific resistance patterns. The results described herein show the feasibility of this one-step encapsulation approach to create size-standardized organoids for scalable production. The liver extracellular matrix-containing microcapsules can provide a powerful platform to build mini healthy and tumor tissues for potential future transplantation or personalized medicine applications. [ABSTRACT FROM AUTHOR]

Although the multidisciplinary area of liver tissue engineering is in continuous progress, research in this field is still focused on developing an ideal liver tissue template. Innovative strategies are required to improve membrane stability and bioactivity. In our study, sustainable biomimetic membranes were developed by blending methacrylated chitosan (CSMA) with jellyfish collagen (jCol) for liver tissue engineering applications. The in vitro biological behaviour demonstrated the capability of the developed membranes to create a suitable milieu to enable hepatocyte growth and differentiation. The functionalization of chitosan together with the biocompatibility of marine collagen and the intrinsic membrane properties offered the ideal biochemical, topographical, and mechanical cues to the cells. Thanks to the enhanced CSMA/jCol membranes' characteristics, hepatocytes on such biomaterials exhibited improved growth, viability, and active liver-specific functions when compared to the cell fate achieved on CSMA membranes. Our study provides new insights about the influence of membrane properties on liver cells behaviour for the design of novel instructive biomaterials. The enrichment of functionalized chitosan with marine collagen represents a promising and innovative approach for the development of an appropriate platform for hepatic tissue engineering., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

In recent studies, liver decellularized extracellular matrix (dECM)-based bioinks have gained significant attention for their excellent compatibility with hepatocytes. However, their low printability limits the fabrication of highly functional liver tissue. In this study, a new liver dECM–gelatin composite bioink (dECM gBioink) was developed to overcome this limitation. The dECM gBioink was prepared by incorporating a viscous gelatin mixture into the liver dECM material. The novel dECM gBioink showed 2.44 and 10.71 times higher bioprinting resolution and compressive modulus, respectively, than a traditional dECM bioink. In addition, the new bioink enabled stable stacking with 20 or more layers, whereas a structure printed with the traditional dECM bioink collapsed. Moreover, the proposed dECM gBioink exhibited excellent hepatocyte and endothelial cell compatibility. At last, the liver lobule mimetic structure was successfully fabricated with a precisely patterned endothelial cell cord-like pattern and primary hepatocytes using the dECM gBioink. The fabricated lobule structure exhibited excellent hepatic functionalities and dose-dependent responses to hepatotoxic drugs. These results demonstrated that the gelatin mixture can significantly improve the printability and mechanical properties of the liver dECM materials while maintaining good cytocompatibility. This novel liver dECM gBioink with enhanced 3D printability and resolution can be used as an advanced tool for engineering highly functional liver tissues.

Drug-induced liver injury (DILI) is a leading cause of attrition in drug development or withdrawal; current animal experiments and traditional 2D cell culture systems fail to precisely predict the liver toxicity of drug candidates. Hence, there is an urgent need for an alternative in vitro model that can mimic the liver microenvironments and accurately detect human-specific drug hepatotoxicity. Here, for the first time we propose the fabrication of an albumin methacryloyl cryogel platform inspired by the liver's microarchitecture via emulating the mechanical properties and extracellular matrix (ECM) cues of liver. Engineered crosslinkable albumin methacryloyl is used as a protein-based building block for fabrication of albumin cryogel in vitro models that can have potential applications in 3D cell culture and drug screening. In this work, protein modification, cryogelation, and liver ECM coating were employed to engineer highly porous three-dimensional cryogels with high interconnectivity, liver-like stiffness, and liver ECM as artificial liver constructs. The resulting albumin-based cryogel in vitro model provided improved cell–cell and cell–material interactions and consequently displayed excellent liver functional gene expression, being conducive to detection of fialuridine (FIAU) hepatotoxicity. [ABSTRACT FROM AUTHOR]

Constructing an engineered hepatic lobule-mimetic model is challenging owing to complicated lobular architecture and crucial hepatic functionality. Our previous study has demonstrated the feasibility of using silk fibroin (SF) scaffolds as functional templates for engineering hepatic lobule-like constructs. But the unsatisfactory chemical and physical performances of the SF-only scaffold and the inherent defect in the functional activity of the carcinoma-derived seeding cells remain to be addressed to satisfy the downstream application demand. In this study, SF-collagen I (SFC) composite scaffolds with improved physical and chemical properties were fabricated, and their utilization for bioengineering a more hepatic lobule-like construct was explored using the immortalized human hepatocyte-derived liver progenitor-like cells (iHepLPCs) and endothelial cells incorporated in the dynamic culture system. The SFC scaffolds prepared through the directional lyophilization process showed radially aligned porous structures with increased swelling ratio and porosity, ameliorative mechanical stiffness that resembled the normal liver matrix more closely, and improved biocompatibility. The iHepLPCs displayed a hepatic plate-like distribution and differentiated into matured hepatocytes with improved hepatic function in vitro and in vivo. Moreover, hepatocyte–endothelial cell interphase arrangement was generated in the co-culture compartment with improved polarity, bile capillary formation, and enhanced liver functions compared with the monocultures. Thus, a more biomimetic hepatic lobule-like model was established and could provide a valuable and robust platform for various applications, including bioartificial liver and drug screening.

Three-dimensional (3D) printing has shown broad applicability in tissue engineering in the last few years. This additive manufacturing technique has been successful in printing complex biodegradable scaffolds and cellular constructs. Its versatility ranges from the fabrication of the hard bone tissues to the highly soft tissues like skin and kidney using synthetic or natural polymers. Recent research advances focus on developing biomimicking tissues, organoids, or organs to replace or bridge the requirement for synthetic implants, organ transplantation, animal model studies for drug screening and development, and personalized medicine profiling, especially for vital organs like the liver. Liver being the most metabolically active organ, undergoes gradual damage over the years of repetitive insults, resulting in severe chronic illness. Despite several advances, 3D printing technology is yet to prove its potential in translating biomimicking liver constructs with high vasculature, functional efficacy, varying stiffness, and complex architectural properties similar to liver lobules. Hence, this review article describes the advanced 3D printing techniques, their advantages and ongoing challenges employed during the fabrication of functionalized liver constructs. It also discusses the favorable solutions available and futuristic approaches for the construction of heterogeneous liver tissue along with its extracellular matrix for generating a new platform to facilitate liver disease treatment. [ABSTRACT FROM AUTHOR]

Liver-associated diseases and tissue engineering approaches based on in vitro culture of functional Primary human hepatocytes (PHH) had been restricted by the rapid de-differentiation in 2D culture conditions which restricted their usability. It was proven that cells growing in 3D format can better mimic the in vivo microenvironment, and thus help in maintaining metabolic activity, phenotypic properties, and longevity of the in vitro cultures. Again, the culture method and type of cell population are also recognized as important parameters for functional maintenance of primary hepatocytes. Hepatic organoids formed by self-assembly of hepatic cells are microtissues, and were able to show long-term in vitro maintenance of hepato-specific characteristics. Thus, hepatic organoids were recognized as an effective tool for screening potential cures and modeling liver diseases effectively. The current review summarizes the importance of 3D hepatic organoid culture over other conventional 2D and 3D culture models and its applicability in Liver tissue engineering. [ABSTRACT FROM AUTHOR]

Liver transplantation is currently the only curative therapy for patients with acute or chronic liver failure. However, a dramatic gap between the number of available liver grafts and the number of patients on the transplantation waiting list emphasizes the need for valid liver substitutes. Whole-organ engineering is an emerging field of tissue engineering and regenerative medicine. It aims to generate transplantable and functional organs to support patients on transplantation waiting lists until a graft becomes available. It comprises two base technologies developed in the last decade; (1) organ decellularization to generate a three-dimensional (3D) extracellular matrix scaffold of an organ, and (2) scaffold recellularization to repopulate both the parenchymal and vascular compartments of a decellularized organ. In this review article, recent advancements in both technologies, in relation to liver whole-organ engineering, are presented. We address the potential sources of hepatocytes and non-parenchymal liver cells for repopulation studies, and the role of stem-cell-derived liver progeny is discussed. In addition, different cell seeding strategies, possible graft modifications, and methods used to evaluate the functionality of recellularized liver grafts are outlined. Based on the knowledge gathered from recent transplantation studies, future directions are summarized.

Advances in biomaterials, particularly in combination with encapsulation strategies, have provided excellent opportunities to increase reproducibility and standardization for cell culture applications. Herein, hybrid microcapsules are produced in a flow-focusing microfluidic droplet generator combined with enzymatic outside-in crosslinking of dextran-tyramine, enriched with human liver extracellular matrix (ECM). The microcapsules provide a physiologically relevant microenvironment for the culture of intrahepatic cholangiocyte organoids (ICO) and patient-derived cholangiocarcinoma organoids (CCAO). Micro-encapsulation allowed for the scalable and size-standardized production of organoids with sustained proliferation for at least 21 days in vitro. Healthy ICO (n = 5) expressed cholangiocyte markers, including KRT7 and KRT19, similar to standard basement membrane extract cultures. The CCAO microcapsules (n = 3) showed retention of stem cell phenotype and expressed LGR5 and PROM1. Furthermore, ITGB1 was upregulated, indicative of increased cell adhesion to ECM in microcapsules. Encapsulated CCAO were amendable to drug screening assays, showing a dose-response response to the clinically relevant anti-cancer drugs gemcitabine and cisplatin. High-throughput drug testing identified both pan-effective drugs as well as patient-specific resistance patterns. The results described herein show the feasibility of this one-step encapsulation approach to create size-standardized organoids for scalable production. The liver extracellular matrix-containing microcapsules can provide a powerful platform to build mini healthy and tumor tissues for potential future transplantation or personalized medicine applications.

The major goal of liver tissue engineering is to reproduce the phenotype and functions of liver cells, especially primary hepatocytes ex vivo. Several strategies have been explored in the recent past for culturing the liver cells in the most apt environment using biological scaffolds supporting hepatocyte growth and differentiation. Nanofibrous scaffolds have been widely used in the field of tissue engineering for their increased surface-to-volume ratio and increased porosity, and their close resemblance with the native tissue extracellular matrix (ECM) environment. Electrospinning is one of the most preferred techniques to produce nanofiber scaffolds. In the current review, we have discussed the various technical aspects of electrospinning that have been employed for scaffold development for different types of liver cells. We have highlighted the use of synthetic and natural electrospun polymers along with liver ECM in the fabrication of these scaffolds. We have also described novel strategies that include modifications, such as galactosylation, matrix protein incorporation, etc., in the electrospun scaffolds that have evolved to support the long-term growth and viability of the primary hepatocytes.

Alcohol injury induces hepatic fibrosis which gradually progresses to cirrhosis, sometimes may lead to liver cancer. Animal models are less efficient in mimicking responses of human liver cells, whereas in vitro models discussed so far are majorly based on rodent cells. In this work, a coculture of primary human hepatocytes (PHHs) with LX-2 cells was established on the unmodified (C:F_0:0), collagen-I modified (C:F_1:0), fibronectin modified (C:F_0:1) and 3:1 collagen-I to fibronectin modified (C:F_3:1) 3D electrospun fibrous scaffolds. The effect of alcohol injury was evaluated on this cell-scaffold model at 0–40 μl/ml alcohol concentrations over 14 days of culture period by using the gold standard sandwich culture as the control. Among all the culture groups, C:F_3:1 scaffold was able to maintain translational and transcriptional properties of human liver cells at all concentrations of alcohol treatment. The study reveals that, PHHs on C:F_3:1 were able to maintain ~4-fold and ~1.6-fold higher secretion of albumin than the gold standard sandwich culture on Day 3 and Day 7, respectively. When treated with alcohol, at concentrations of 20 and 40 μl/ml, albumin secretion was also observed to be higher (~2-fold) when compared to the gold standard sandwich culture. Again as expected, in C:F_3:1 culture group on 40 μl/ml alcohol treatment, albumin gene expression decreased by ~2-fold due to alcohol toxicity, whereas CYP2C9, CYP3A4, CYP2E1 and CYP1A2 gene expressions upregulated by ~3.5, ~~4, ~5 and ~15-fold, respectively in response to the alcohol injury. LX-2 cells also acquire more quiescent phenotype on C:F_3:1 scaffolds when compared to the gold standard sandwich culture upon alcohol treatment. Thus, C:F_3:1 scaffold with human liver cells was established as the potential platform to scan alcohol toxicity at varied alcohol concentrations. Thus, it can pave a promising path not only to support functional healthy human liver cells for liver tissue engineering but also to examine potential drugs to study the progression or inhibition of alcoholic liver fibrosis in vitro. [ABSTRACT FROM AUTHOR]

Drug-induced liver injury (DILI) is a leading cause of attrition in drug development or withdrawal; current animal experiments and traditional 2D cell culture systems fail to precisely predict the liver toxicity of drug candidates. Hence, there is an urgent need for an alternative in vitro model that can mimic the liver microenvironments and accurately detect human-specific drug hepatotoxicity. Here, for the first time we propose the fabrication of an albumin methacryloyl cryogel platform inspired by the liver’s microarchitecture via emulating the mechanical properties and extracellular matrix (ECM) cues of liver. Engineered crosslinkable albumin methacryloyl is used as a protein-based building block for fabrication of albumin cryogel in vitro models that can have potential applications in 3D cell culture and drug screening. In this work, protein modification, cryogelation, and liver ECM coating were employed to engineer highly porous three-dimensional cryogels with high interconnectivity, liver-like stiffness, and liver ECM as artificial liver constructs. The resulting albumin-based cryogel in vitro model provided improved cell–cell and cell–material interactions and consequently displayed excellent liver functional gene expression, being conducive to detection of fialuridine (FIAU) hepatotoxicity.

In liver tissue engineering, improving the ability of the scaffold to increase the tendency of cells to grow and proliferate is very important. In this study, new methods for modifying the surface of Polycaprolactone (PCL)/Chitosan (Cs) nanofiber for use in liver tissue engineering have been proposed. Galactosylation of chitosan was performed in three ways. According to the FE-SEM, FTIR, NMR and DSC analysis, presence of galactose in uniform nanofibers confirmed and led to a decrease in crystallinity. The hydrophobicity of the scaffolds by contact angle showed that the scaffold with galactosylated after electrospinning, had the highest contact angle of 82.22 ± 2° compared to raw scaffold with 98.52 ± 4°. According to the results of degradation in PBS, the highest rate of degradation was observed in scaffolds that were galactosylated after electrospinning. By culturing HepG2 cells on and based on the results of SEM and MTT analysis, found that the presence of galactose in the scaffolds significantly increased cell growth and proliferation without any toxicity. The immersion method shows a greater ability to improve the growth of liver cells. Also, using in-situ way due to the roughness created in this method may lead to better results especially for in-vivo tests. [ABSTRACT FROM AUTHOR]

As a precursor of graphene, graphene oxide (GO) exhibits excellent mechanical, thermal, and electrical properties, besides appreciable biocompatibility in tissue engineering applications. However, the current GO‐3D fabrication technology is still in need of optimization and simplification to ensure fine architecture and reasonable mechanical properties, which would further promote the performance of GO as bio‐scaffolds in cell or microorganism attachment and in material transformation. To address this issue, we proposed a GO ink, with appreciable rheological properties and excellent printing performance via high‐speed centrifugation and ferric ion‐assisted cross‐linking. A woodpile structure with controllable micro‐pores was produced by micro‐extrusion‐based 3D printing technology followed by an optimized freeze‐drying process. Cellular adhesion and viability were verified by inoculation and culture of HepaRG cells using the fabricated GO 3D structure, thus suggesting ferric ion‐assisted cross‐linking and controllable pore distribution for improving the performance of the GO construct as a bio‐scaffold for in vitro liver tissue models. [ABSTRACT FROM AUTHOR]

Liver tissue engineering aims to create transplantable liver grafts that can serve as substitutes for donor's livers. One major challenge in creating a fully functional liver tissue has been to recreate the biliary drainage in an engineered liver construct through integration of bile canaliculi (BC) with the biliary ductular network that would enable the clearance of bile from the hepatocytes to the host duodenum. In this study, we show the formation of such a hepatic microtissue by coculturing rat primary hepatocytes with cholangiocytes and stromal cells. Our results indicate that within the spheroids, hepatocytes maintained viability and function for up to 7 days. Viable hepatocytes became polarized by forming BC with the presence of tight junctions. Morphologically, hepatocytes formed the core of the spheroids, while cholangiocytes resided at the periphery forming a monolayer microcysts and tubular structures extending outward. The spheroids were subsequently cultured in clusters to create a higher order ductular network resembling hepatic lobule. The cholangiocytes formed functional biliary ductular channels in between hepatic spheroids that were able to collect, transport, and secrete bile. Our results constitute the first step to recreate hepatic building blocks with biliary drainage for repopulating the whole liver scaffolds to be used as transplantable liver grafts. [ABSTRACT FROM AUTHOR]

We recently demonstrated that HepaRG cells encapsulated into 1.5% alginate beads are capable of self‐assembling into spheroids. They adequately differentiate into hepatocyte‐like cells, with hepatic features observed at Day 14 post‐encapsulation required for external bioartificial liver applications. Preliminary investigations performed within a bioreactor under shear stress conditions and using a culture medium mimicking acute liver failure (ALF) highlighted the need to reinforce beads with a polymer coating. We demonstrated in a first step that a poly‐l‐lysine coating improved the mechanical stability, without altering the metabolic activities necessary for bioartificial liver applications (such as ammonia and lactate elimination). In a second step, we tested the optimized biomass in a newly designed perfused dynamic bioreactor, in the presence of the medium model for pathological plasma for 6 h. Performances of the biomass were enhanced as compared to the steady configuration, demonstrating its efficacy in decreasing the typical toxins of ALF. This type of bioreactor is easy to scale up as it relies on the number of micro‐encapsulated cells, and could provide an adequate hepatic biomass for liver supply. Its design allows it to be integrated into a hybrid artificial/bioartificial liver setup for further clinical studies regarding its impact on ALF animal models. [ABSTRACT FROM AUTHOR]

BACKGROUND: China is a country with high incidence of liver disease. Liver tissue engineering, which is still in the stage of exploration, has brought a new hope for treatment. OBJECTIVE: To provide advices and references for the development and innovation of liver tissue engineering based on patent analysis. METHODS: The number and development tendency, as well as the technology birthplace, target market, applicants, inventors and technical fields of patents in the field of liver tissue engineering in nearly 20 years were analyzed in this study. The keywords for full-text search included tissue engineering, tissue regenerate/repair, and hepatic/liver. The retrieval deadline was December 28, 2018. RESULTS AND CONCLUSION: There is a rapid development in the field of the global liver tissue engineering. The compound growth rate in the past 10 years is 8.64%, of which invention patents account for 84.93%. China is the main technology birthplace; however, the number of tripartite patents of China is far less than that of the United States and Japan. China and the United States are the two most high-profile target markets in the field of liver tissue engineering, but the applicants are mostly from native instead of international. Meanwhile, there are 8 Chinese application institutions and 14 Chinese inventors ranking among the top 20 in the world in this field. In conclusion, liver tissue engineering has developed rapidly in China, but the lack of core technology is still an important issue. Therefore, we must improve our innovation capabilities and explore core technologies continuously to enhance our international competitiveness. [ABSTRACT FROM AUTHOR]

Liver-associated diseases and tissue engineering approaches based on in vitro culture of functional Primary human hepatocytes (PHH) had been restricted by the rapid de-differentiation in 2D culture conditions which restricted their usability. It was proven that cells growing in 3D format can better mimic the in vivo microenvironment, and thus help in maintaining metabolic activity, phenotypic properties, and longevity of the in vitro cultures. Again, the culture method and type of cell population are also recognized as important parameters for functional maintenance of primary hepatocytes. Hepatic organoids formed by self-assembly of hepatic cells are microtissues, and were able to show long-term in vitro maintenance of hepato-specific characteristics. Thus, hepatic organoids were recognized as an effective tool for screening potential cures and modeling liver diseases effectively. The current review summarizes the importance of 3D hepatic organoid culture over other conventional 2D and 3D culture models and its applicability in Liver tissue engineering.

Liver transplantation is the only definitive treatment for end-stage liver disease and its availability is restricted by organ donor shortages. The development of liver bioengineering provides the probability to create a functional alternative to reduce the gap in organ demand and supply. Decellularized liver scaffolds have been widely applied in bioengineering because they can mimic the native liver microenvironment and retain extracellular matrix (ECM) components. Multiple approaches including chemical, physical and biological methods have been developed for liver decellularization in current studies, but a full set of unified criteria has not yet been established. Each method has its advantages and drawbacks that influence the microstructure and ligand landscape of decellularized liver scaffolds. Optimizing a decellularization method to eliminate cell material while retaining as much of the ECM intact as possible is therefore important for biological scaffold applications. Furthermore, crosslinking strategies can improve the biological performance of scaffolds, including reinforcing biomechanics, delaying degradation in vivo and reducing immune rejection, which can better promote the integration of re-cellularized scaffolds with host tissue and influence the reconstruction process. In this review, we aim to present the different liver decellularization techniques, the crosslinking methods to improve scaffold characteristics with crosslinking and the preparation of soluble ECM., Competing Interests: Declaration of conflicting interestsThe author(s) declared the following potential conflicts of interest with respect to the research, authorship, and/or publication of this article: Jiajia Wang drafted the paper. Xiaojun Jin critically revised the work. All authors read and approved the final manuscript.

In recent years, studies on liver graft construction using the decellularized liver as a template for transplantation therapy have attracted much attention. However, the therapeutic effect of constructed liver grafts in hepatic failure has not been evaluated. Therefore, we aimed to develop a novel evaluation system demonstrating the curative effect of a constructed liver graft in animals with hepatic failure. First, we developed a highly reproducible rat model of hepatic failure by combining 80% partial hepatectomy with warm ischemia. In this model, severity could be controlled by the warm ischemic period. We also constructed a liver graft by recellularization of decellularized liver, and confirmed the ammonia metabolic function in the graft in vitro as one of the most important functions for recovery from hepatic failure. The graft was then applied to our developed hepatic failure rat model using a blood extracorporeal circulation system. In this application, the graft metabolized the ammonia in the blood of animals with hepatic failure and was thus suggested to be effective for the treatment of hepatic failure. In summary, a novel evaluation system for whole-organ-engineered liver graft as a preliminary stage of transplantation was developed. This system was expected to provide much information about the curative effect of a constructed liver graft. [ABSTRACT FROM AUTHOR]

Graphical abstract Highlights • We have developed a novel bio-degradable PCL-PLA-PAAm-IGF-1/TNF-α 3D scaffold. • The scaffolds could be efficiently inhibited BMSC senescence and induced BMSCs differentiation into hepatocytes. • Our works provide a new idea in the fields such as bio-degradable biomaterial construction and ALF treatment. Abstract Physical elasticity is a major mechanical property of several tissue types, and enormous efforts have been invested into the development of elastomeric biomaterials that mimic properties of native tissue. In the present study, a polycaprolactone-polylactic acid scaffold was photografted with polyacrylamide, tumor necrosis factor-alpha, and insulin-like growth factor 1 to construct a novel scaffold, which was named the polycaprolactone-polylactic acid-polypropylene amine-insulin-like growth factor 1/tumor necrosis factor-α (PCL-PLA-PAAm-IGF-1/TNF-α) scaffold. Its inhibitory effect on cell senescence of bone marrow mesenchymal stem cells was studied. When the PCL-PLA-PAAm-IGF-1/TNF-α scaffolds were transplanted into a rat model of acute hepatic failure, we found that the scaffolds clearly contributed to liver repair. The simple method presented here may be useful for the preparation of cell-scaffold complexes for liver tissue engineering. [ABSTRACT FROM AUTHOR]

Acute and chronic liver diseases cause significant morbidity and mortality worldwide, affecting millions of people. Liver transplantation is the primary intervention method, replacing a non-functional liver with a functional one. However, the field of liver transplantation faces challenges such as donor shortage, postoperative complications, immune rejection, and ethical problems. Consequently, there is an urgent need for alternative therapies that can complement traditional transplantation or serve as an alternative method. In this review, we explore the potential of liver tissue engineering as a supplementary approach to liver transplantation, offering benefits to patients with severe liver dysfunctions.

The varied functions of the liver are dependent on the metabolic heterogeneity exhibited by the hepatocytes within the liver lobule spanning the porto-central axis. This complex phenomenon plays an important role in maintaining the physiological homeostasis of the liver. Standard in vitro culture models fail to mimic this spatial heterogeneity of hepatocytes, assuming a homogeneous population of cells, which leads to inaccurate translation of results. Here, we demonstrate the development of an in vitro model of hepatic zonation by mimicking the microarchitecture of the liver using a 3D printed mini bioreactor and decellularized liver matrix to provide the native microenvironmental cues. There was a differential expression of hypoxic and metabolic markers across the developed mini bioreactor, showing the establishment of gradients of oxygen, Wnt/β-catenin pathway, and other metabolic pathways. The model also showed the establishment of zone-dependent toxicity on treatment with acetaminophen. The developed model would thus be a promising avenue in the field of tissue engineering for understanding the liver physiology and pathophysiology and for drug screening to evaluate the potential of new pharmaceutical interventions.

Background: Improving the mechanical properties and angiogenesis of acellular scaffolds before transplantation is an important challenge facing the development of acellular liver grafts. The present study aimed to evaluate the cytotoxicity and angiogenesis of polyethylene glycol (PEG) crosslinked decellularized single liver lobe scaffolds (DLSs), and establish its suitability as a graft for long-term liver tissue engineering., Methods: Using mercaptoacrylate produced by the Michael addition reaction, DLSs were first modified using N-succinimidyl S-acetylthioacetate (SATA), followed by cross-linking with PEG as well as vascular endothelial growth factor (VEGF). The optimal concentration of agents and time of the individual steps were identified in this procedure through biomechanical testing and morphological analysis. Subsequently, human umbilical vein endothelial cells (HUVECs) were seeded on the PEG crosslinked scaffolds to detect the proliferation and viability of cells. The scaffolds were then transplanted into the subcutaneous tissue of Sprague-Dawley rats to evaluate angiogenesis. In addition, the average number of blood vessels was evaluated in the grafts with or without PEG at days 7, 14, and 21 after implantation., Results: The PEG crosslinked DLS maintained their three-dimensional structure and were more translucent after decellularization than native DLS, which presented a denser and more porous network structure. The results for Young's modulus proved that the mechanical properties of 0.5 PEG crosslinked DLS were the best and close to that of native livers. The PEG-VEGF-DLS could better promote cell proliferation and differentiation of HUVECs compared with the groups without PEG cross-linking. Importantly, the average density of blood vessels was higher in the PEG-VEGF-DLS than that in other groups at days 7, 14, and 21 after implantation in vivo., Conclusions: The PEG crosslinked DLS with VEGF could improve the biomechanical properties of native DLS, and most importantly, their lack of cytotoxicity provides a new route to promote the proliferation of cells in vitro and angiogenesis in vivo in liver tissue engineering., (Copyright © 2022 First Affiliated Hospital, Zhejiang University School of Medicine in China. Published by Elsevier B.V. All rights reserved.)

The cell spheroid technology, which greatly enhances cell-cell interactions, has gained significant attention in the development of in vitro liver models. However, existing cell spheroid technologies still have limitations in improving hepatocyte-extracellular matrix (ECM) interaction, which have a significant impact on hepatic function. In this study, we have developed a novel bioprinting technology for decellularized ECM (dECM)-incorporated hepatocyte spheroids that could enhance both cell-cell and -ECM interactions simultaneously. To provide a biomimetic environment, a porcine liver dECM-based cell bio-ink was developed, and a spheroid printing process using this bio-ink was established. As a result, we precisely printed the dECM-incorporated hepatocyte spheroids with a diameter of approximately 160-220 μm using primary mouse hepatocyte (PMHs). The dECM materials were uniformly distributed within the bio-printed spheroids, and even after more than 2 weeks of culture, the spheroids maintained their spherical shape and high viability. The incorporation of dECM also significantly improved the hepatic function of hepatocyte spheroids. Compared to hepatocyte-only spheroids, dECM-incorporated hepatocyte spheroids showed approximately 4.3- and 2.5-fold increased levels of albumin and urea secretion, respectively, and a 2.0-fold increase in CYP enzyme activity. These characteristics were also reflected in the hepatic gene expression levels of ALB , HNF4A , CPS1 , and others. Furthermore, the dECM-incorporated hepatocyte spheroids exhibited up to a 1.8-fold enhanced drug responsiveness to representative hepatotoxic drugs such as acetaminophen, celecoxib, and amiodarone. Based on these results, it can be concluded that the dECM-incorporated spheroid printing technology has great potential for the development of highly functional in vitro liver tissue models for drug toxicity assessment., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Kim, Jeong, Jeon and Kang.)

Immortalized liver cell lines and primary hepatocytes are currently used as in vitro models for hepatotoxic drug screening. However, a decline in the viability and functionality of hepatocytes with time is an important limitation of these culture models. Advancements in tissue engineering techniques have allowed us to overcome this challenge by designing suitable scaffolds for maintaining viable and functional primary hepatocytes for a longer period of time in culture. In the current study, we fabricated liver-specific nanofiber scaffolds with polylactic acid (PLA) along with a decellularized liver extracellular matrix (LEM) by the electrospinning technique. The fabricated hybrid PLA-LEM scaffolds were more hydrophilic and had better swelling properties than the PLA scaffolds. The hybrid scaffolds had a pore size of 38 ± 8 μm and supported primary rat hepatocyte cultures for 10 days. Increased viability (2-fold increase in the number of live cells) and functionality (5-fold increase in albumin secretion) were observed in primary hepatocytes cultured on the PLA-LEM scaffolds as compared to those on conventional collagen-coated plates on day 10 of culture. A significant increase in CYP1A2 enzyme activity was observed in hepatocytes cultured on PLA-LEM hybrid scaffolds in comparison to those on collagen upon induction with phenobarbital. Drugs like acetaminophen and rifampicin showed the highest toxicity in hepatocytes cultured on hybrid scaffolds. Also, the lethal dose of these drugs in rodents was accurately predicted as 1.6 g/kg and 594 mg/kg, respectively, from the corresponding IC 50 values obtained from drug-treated hepatocytes on hybrid scaffolds. Thus, the fabricated liver-specific electrospun scaffolds maintained primary hepatocyte viability and functionality for an extended period in culture and served as an effective ex vivo drug screening platform to predict an accurate in vivo drug-induced hepatotoxicity.

Injectable hydrogels have been paid more attentions on cell therapy and tissue regeneration resulting from the applications in minimally invasive surgical procedures with ease of handling and complete filling of defect area. Here, a biodegradable and injectable in situ hydrogel formed by glycyrrhizin (GL), alginate (Alg), and calcium (Ca) was developed for three‐dimensional (3D) cell culture. Differential scanning calorimetry (DSC), X‐ray diffraction (XRD), scanning electron microscope (SEM) and rheology analysis were performed to characterize GL‐Alg‐Ca hydrogel and evaluate its formation mechanism, properties, and morphology. The biocompatibility of hydrogel was investigated by cell viability, morphology, and liver specific functions. The results of DSC, XRD, and rheology suggested that hydrogel was homogenous complex with stable structure and well viscoelasticity. Human hepatoma HepG2 cells cultured in hydrogels showed well morphology. Compared with the control group, cells in hydrogels showed good biocompatibility, and could maintain the viability, proliferation and liver function for longer periods of time. Furthermore, the hydrogel improved the mRNA expression of cytochrome P450, which were key enzyme to the metabolization of hepatocytes. The GL‐Alg‐Ca hydrogel could be a potential 3D cells culture system for liver tissue engineering. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 3292–3302, 2018. [ABSTRACT FROM AUTHOR]

Abstract Lactobionic acid (LBA) has rapidly emerged as a strategic functionalization molecule in the development of nanoparticle-based platforms and biomaterials with promising therapeutic applications. Exploiting the multi-functionality of LBA has enabled to expand the drug loading, release and selective cellular uptake capacity of hepatoma-targeting chemotherapy and nanoparticle-based theranostic systems. The high liver-specificity displayed by LBA-conjugated dendrimers, micelles and nanoparticles has indeed reinforced the great potential of LBA in fine-tuning the surface engineering of promising drug carriers to combat hepatocellular carcinoma. Additionally, its cytocompatibility, selectivity and functionality confer unique properties to design synthetically engineered matrices with enhanced liver-specificity for liver tissue engineering applications. Notably, the biospecific identification and biochemical cross-linking specificity found with the asialoglycoprotein receptor (ASGPR) have converted LBA into the perfect cell-targeting ligand for strengthening the recognition between novel designed nanocarriers and hepatocytes at cellular level. The present review overviews the latest advances in the galactosylation of target-specific nanocarriers and polymers via LBA functionalization with an emphasis on the great bioengineering versatility offered by this polyhydroxy bionic acid in the preparation of next-generation tools ranging from contrast imaging agents to galactosylated scaffolds for the diagnosis and treatment of hepatic diseases. Perspectives on the bioengineering approaches that can foster the design of multi-functional LBA-conjugated therapeutic nanoplatforms are also discussed. Graphical abstract Unlabelled Image Highlights • Lactobionic acid offers unique specificity in targeted liver cancer chemotherapy. • Cell internalization is unlocked via lactobionic acid functionalization. • Lactobionic acid grafting enables specific targeting of hepatocarcinoma cells. • Lactobionic acid modulates hepatocyte adhesion in liver tissue engineering approaches. • Lactobionic acid supports spheroid formation with enhanced liver-specific functions. [ABSTRACT FROM AUTHOR]