Search

Bacterial antibiotic resistance is a serious global public health concern. Infections caused by colistin-resistant Pseudomonas aeruginosa (CRPa) strains represent a serious threat due to their considerable morbidity and mortality rates, since most of the current empirical antibiotic therapies are ineffective against these strains. Accordingly, cationic antimicrobial peptides (CAMPs) have emerged as promising alternatives to control resistant bacteria. In this study, the interaction of a CAMP derived from cecropin D-like (∆M2) with model membranes mimicking bacterial biomembranes of wild-type (WTPa) strains of P. aeruginosa and CRPa was evaluated through in vitro and in silico approaches. In vitro interaction was determined by infrared spectroscopy, whereas in silico molecular dynamics was performed to predict specific interactions between amino acids of ∆M2 and lipids of model membrane systems. Experimental analysis showed this peptide interacted with the lipids of bacterial-like model membranes of WTPa and CRPa. In both cases, an increase in the concentration of peptides induced an increase in the phase transition temperature of the lipid systems. On the other hand, the peptides in solution underwent a transition from a random to a helical secondary structure after interacting with the membranes mostly favored in the CRPa system. The α-helix structure percentage for ΔM2 interacting with WTPa and CRPa lipid systems was 6.4 and 33.2%, respectively. Finally, molecular dynamics showed ∆M2 to have the most affinities toward the phospholipids palmitoyl-oleyl-phosphatidylglycerol (POPG) and palmitoyl-oleoyl-phosphatidylethanolamine (POPE) that mimic membranes of WTPa and CRPa, respectively. This work provides clues for elucidating the membrane-associated mechanism of action of ∆M2 against colistin-susceptible and -resistant strains of Pseudomonas aeruginosa. [ABSTRACT FROM AUTHOR]

The development of antimicrobial agents against multidrug-resistant bacteria is an important medical challenge. Antimicrobial peptides (AMPs), human cathelicidin LL-37 and its derivative OP-145, possess a potent antimicrobial activity and were under consideration for clinical trials. In order to overcome some of the challenges to their therapeutic potential, a very promising AMP, SAAP-148 was designed. Here, we studied the mode of action of highly cationic SAAP-148 in comparison with OP-145 on membranes of Enterococcus hirae at both cellular and molecular levels using model membranes composed of major constituents of enterococcal membranes, that is, anionic phosphatidylglycerol (PG) and cardiolipin (CL). In all assays used, SAAP-148 was consistently more efficient than OP-145, but both peptides displayed pronounced time and concentration dependences in killing bacteria and performing at the membrane. At cellular level, Nile Red-staining of enterococcal membranes showed abnormalities and cell shrinkage, which is also reflected in depolarization and permeabilization of E. hirae membranes. At the molecular level, both peptides abolished the thermotropic phase transition and induced disruption of PG/CL. Interestingly, the membrane was disrupted before the peptides neutralized the negative surface charge of PG/CL. Our results demonstrate that SAAP-148, which kills bacteria at a significantly lower concentration than OP-145, shows stronger effects on membranes at the cellular and molecular levels. [ABSTRACT FROM AUTHOR]

Antimicrobial peptides (AMPs) can be directed to specific membranes based on differences in lipid composition. In this study, we performed atomistic and coarse-grained simulations of different numbers of the designed AMP adepantin-1 with a eukaryotic membrane, cytoplasmic Gram-positive and Gram-negative membranes, and an outer Gram-negative membrane. At the core of adepantin-1’s behavior is its amphipathic α-helical structure, which was implemented in its design. The amphipathic structure promotes rapid self-association of peptide in water or upon binding to bacterial membranes. Aggregates initially make contact with the membrane via positively charged residues, but with insertion, the hydrophobic residues are exposed to the membrane’s hydrophobic core. This adaptation alters the aggregate’s stability, causing the peptides to diffuse in the polar region of the membrane, mostly remaining as a single peptide or pairing up to form an antiparallel dimer. Thus, the aggregate’s proposed role is to aid in positioning the peptide into a favorable conformation for insertion. Simulations revealed the molecular basics of adepantin-1 binding to various membranes, and highlighted peptide aggregation as an important factor. These findings contribute to the development of novel anti-infective agents to combat the rapidly growing problem of bacterial resistance to antibiotics.

Bacterial antibiotic resistance is a serious global public health concern. Infections caused by colistin-resistant Pseudomonas aeruginosa (CRPa) strains represent a serious threat due to their considerable morbidity and mortality rates, since most of the current empirical antibiotic therapies are ineffective against these strains. Accordingly, cationic antimicrobial peptides (CAMPs) have emerged as promising alternatives to control resistant bacteria. In this study, the interaction of a CAMP derived from cecropin D-like (∆M2) with model membranes mimicking bacterial biomembranes of wild-type (WTPa) strains of P. aeruginosa and CRPa was evaluated through in vitro and in silico approaches. In vitro interaction was determined by infrared spectroscopy, whereas in silico molecular dynamics was performed to predict specific interactions between amino acids of ∆M2 and lipids of model membrane systems. Experimental analysis showed this peptide interacted with the lipids of bacterial-like model membranes of WTPa and CRPa. In both cases, an increase in the concentration of peptides induced an increase in the phase transition temperature of the lipid systems. On the other hand, the peptides in solution underwent a transition from a random to a helical secondary structure after interacting with the membranes mostly favored in the CRPa system. The α-helix structure percentage for ΔM2 interacting with WTPa and CRPa lipid systems was 6.4 and 33.2%, respectively. Finally, molecular dynamics showed ∆M2 to have the most affinities toward the phospholipids palmitoyl-oleyl-phosphatidylglycerol (POPG) and palmitoyl-oleoyl-phosphatidylethanolamine (POPE) that mimic membranes of WTPa and CRPa, respectively. This work provides clues for elucidating the membrane-associated mechanism of action of ∆M2 against colistin-susceptible and -resistant strains of Pseudomonas aeruginosa.

The development of antimicrobial agents against multidrug-resistant bacteria is an important medical challenge. Antimicrobial peptides (AMPs), human cathelicidin LL-37 and its derivative OP-145, possess a potent antimicrobial activity and were under consideration for clinical trials. In order to overcome some of the challenges to their therapeutic potential, a very promising AMP, SAAP-148 was designed. Here, we studied the mode of action of highly cationic SAAP-148 in comparison with OP-145 on membranes of Enterococcus hirae at both cellular and molecular levels using model membranes composed of major constituents of enterococcal membranes, that is, anionic phosphatidylglycerol (PG) and cardiolipin (CL). In all assays used, SAAP-148 was consistently more efficient than OP-145, but both peptides displayed pronounced time and concentration dependences in killing bacteria and performing at the membrane. At cellular level, Nile Red-staining of enterococcal membranes showed abnormalities and cell shrinkage, which is also reflected in depolarization and permeabilization of E. hirae membranes. At the molecular level, both peptides abolished the thermotropic phase transition and induced disruption of PG/CL. Interestingly, the membrane was disrupted before the peptides neutralized the negative surface charge of PG/CL. Our results demonstrate that SAAP-148, which kills bacteria at a significantly lower concentration than OP-145, shows stronger effects on membranes at the cellular and molecular levels.

Antimicrobial peptides represent ancient host defense effector molecules present in organisms across the evolutionary spectrum. Lots of antimicrobial peptides were synthesized based on well-known structural motif widely existed in a variety of lives. Leucine-rich repeats (LRRs) are sequence motifs present in over 60,000 proteins identified from viruses, bacteria, and eukaryotes. To elucidate if LRR motif possesses antimicrobial potency, two peptides containing one or two LRRs were designed. The biological activity and membrane-peptide interactions of the peptides were analyzed. The results showed that the tandem of two LRRs exhibited similar antibacterial activity and significantly weaker hemolytic activity against hRBCs than the well-known membrane active peptide melittin. The peptide with one LRR was defective at antimicrobial and hemolytic activity. The peptide containing two LRRs formed α-helical structure, respectively, in the presence of membrane-mimicking environment. LRR-2 retained strong resistance to cations, heat, and some proteolytic enzymes. The blue shifts of the peptides in two lipid systems correlated positively with their biological activities. Other membrane-peptide experiments further provide the evidence that the peptide with two LRRs kills bacteria via membrane-involving mechanism. The present study increases our new understanding of well-known LRR motif in antimicrobial potency and presents a potential strategy to develop novel antibacterial agents. [ABSTRACT FROM AUTHOR]

Antimicrobial peptides (AMPs) can be directed to specific membranes based on differences in lipid composition. In this study, we performed atomistic and coarse-grained simulations of different numbers of the designed AMP adepantin-1 with a eukaryotic membrane, cytoplasmic Gram-positive and Gram-negative membranes, and an outer Gram-negative membrane. At the core of adepantin-1's behavior is its amphipathic α-helical structure, which was implemented in its design. The amphipathic structure promotes rapid self-association of peptide in water or upon binding to bacterial membranes. Aggregates initially make contact with the membrane via positively charged residues, but with insertion, the hydrophobic residues are exposed to the membrane's hydrophobic core. This adaptation alters the aggregate's stability, causing the peptides to diffuse in the polar region of the membrane, mostly remaining as a single peptide or pairing up to form an antiparallel dimer. Thus, the aggregate's proposed role is to aid in positioning the peptide into a favorable conformation for insertion. Simulations revealed the molecular basics of adepantin-1 binding to various membranes, and highlighted peptide aggregation as an important factor. These findings contribute to the development of novel anti-infective agents to combat the rapidly growing problem of bacterial resistance to antibiotics.

Abstract: Guanylate cyclase-activating protein-2 (GCAP-2) is a retinal Ca2+ sensor protein. It plays a central role in shaping the photoreceptor light response and in light adaptation through the Ca2+-dependent regulation of the transmembrane retinal guanylate cyclase (GC). GCAP-2 is N-terminally myristoylated and the full activation of the GC requires this lipid modification. The structural and functional role of the N-terminus and particularly of the myristoyl moiety is currently not well understood. In particular, detailed structural information on the myristoylated N-terminus in the presence of membranes was not available. Therefore, we studied the structure and dynamics of a 19 amino acid peptide representing the myristoylated N-terminus of GCAP-2 bound to lipid membranes by solid-state NMR. 13C isotropic chemical shifts revealed a random coiled secondary structure of the peptide. Peptide segments up to Ala9 interact with the membrane surface. Order parameters for Cα and side chain carbons obtained from DIPSHIFT experiments are relatively low, suggesting high mobility of the membrane-associated peptide. Static 2H solid-state NMR measurements show that the myristoyl moiety is fully incorporated into the lipid membrane. The parameters of the myristoyl moiety and the DMPC host membrane are quite similar. Furthermore, dynamic parameters (obtained from 2H NMR relaxation rates) of the peptide''s myristic acid chain are also comparable to those of the lipid chains of the host matrix. Therefore, the myristoyl moiety of the N-terminal peptide of GCAP-2 fills a similar conformational space as the surrounding phospholipid chains. [Copyright &y& Elsevier]