Search

In order to improve convective flow, this study primarily used techniques including curved surfaces and a strong magnetic force. Cold temperatures and even flow are experienced by both the circular outer wall and the sinusoidal inner wall. FHD can have a bigger effect when combined with iron oxide in the base fluid. The electric current-carrying wire was positioned close to the interior wall in order to produce Kelvin force. A novel modeling approach was chosen to ascertain the number of scalars throughout the entire domain, and the process was validated using earlier numerical work. Gravity forces, ferrofluid concentrations, and the Kelvin force serve as the main pillars of current research. Conduction features increase and the Nu rises by 12.44% when nanopowders are used. Due to gravity and magnetic forces, the nanofluid can move more easily through the container. At Ra = 1 e 3 and 1e4, respectively, Nu increases by 93.04% and 35.43%; with an increase in MnF. Additionally, Nu rises with Ra at Mn F = 0 and Mn F = 4 0 0 0 by 43.55% and 0.71%, respectively. [ABSTRACT FROM AUTHOR]

The study of steady natural convection Couette flow is vital in designing as well as the optimization of microfluidic devices, geothermal energy systems, cooling of electronic devices and systems, etc., due to several recent applications. The present investigation aims to analyze radiative heat transfer and dissipative energy in the free convection of Couette flow within a vertically positioned channel. Incorporating carbon nanotubes (CNTs), specifically single-wall carbon nanotubes (SWCNTs) and multi-wall carbon nanotubes (MWCNTs), into the base fluid water enhances the flow phenomena. Additionally, the explanation of heat source/sink on the energy phenomenon encounters various properties. Further, suitable similarity variables are employed for the transformation of the governing equations. However, the homotopy perturbation method (HPM), an analytical approach, is used for the solution of the coupled ordinary differential equations. The thermophysical parameters and their impact are depicted through graphs, and the comparative analysis is presented via tables. Explore the combined effects of CNT nanoparticle concentrations on the Couette flow through a vertical channel. The inclusion of radiating heat on free convection of nanofluid enriches the flow phenomena. The adaptation of various thermophysical properties, i.e., in particular, the thermal conductivity, shows its effectiveness on the heat transport phenomenon. Clarify different contributing parameters by using the homotopy analysis method. [ABSTRACT FROM AUTHOR]

This work describes the natural convection and thermodynamic irreversibility of alumina-water nanofluid filled inside a layered cavity. The local thermal non-equilibrium (LTNE) approach is taken into consideration. The cavity bed is considered as a wavy hot plate of a very thin thickness, while its roof is thermally insulated. The heat is dissipated from the cold vertical walls. A porous layer fills the cavity's lower half and is assumed to obey the Darcy-Forchheimer model. The finite-element method is adopted to compile the numerical results. The relevant parameters assessed in this paper are the Darcy number, waviness of the hot bottom wall, porosity, volume fraction of alumina nanoparticles and the modified ratio of thermal conductivity. The obtained numerical results show that the LTNE condition expands as the Darcy number augments, while a quasi-local thermal equilibrium is attained with a higher modified ratio of thermal conductivity. The waviness of the hot wall raises the Nusselt number of both the fluid and the solid phases but produces more entropy. It is quoted that the augmentations in the fluid and solid phases of the Nusselt numbers and the increase in the maximum entropy production are 42.25%, 69% and 55.5%, respectively. [ABSTRACT FROM AUTHOR]

Natural convection is a heat transfer mechanism driven by temperature or density differences, leading to fluid motion without external influence. It occurs in various natural and engineering phenomena, influencing heat transfer, climate, and fluid mixing in industrial processes. This work aims to use the Updated Lagrangian Particle Hydrodynamics (ULPH) theory to address natural convection problems. The Navier-Stokes equation is discretized using second-order nonlocal differential operators, allowing a direct solution of the Laplace operator for temperature in the energy equation. Various numerical simulations, including cases such as natural convection in square cavities and two concentric cylinders, were conducted to validate the reliability of the model. The results demonstrate that the proposed model exhibits excellent accuracy and performance, providing a promising and effective numerical approach for natural convection problems. [ABSTRACT FROM AUTHOR]

This paper presents a numerical study of natural convection in an annular cavity filled with a hybrid nanofluid under the influence of a magnetic field. This study is significant for applications requiring enhanced thermal management, such as in heat exchangers, electronics cooling, and energy systems. The inner cylinder, equipped with fins and subjected to uniform volumetric heat generation, contrasts with the adiabatic outer cylinder. This study aims to investigate how different nanoparticle combinations (Fe3O4 with Cu, Ag, and Al2O3) and varying Hartmann and Rayleigh numbers impact heat transfer efficiency. The finite volume method is employed to solve the governing equations, with simulations conducted using Fluent 6.3.26. Parameters such as volume fraction (ϕ2 = 0.001, 0.004, 0.006), Hartmann number (0 ≤ Ha ≤ 100), Rayleigh number (3 × 103 ≤ Ra ≤ 2.4 × 104), and fin number (N = 0, 2, 4, 6, 8) are analyzed. Streamlines, isotherms, and induced magnetic field contours are utilized to assess flow structure and heat transfer. The results reveal that increasing the Rayleigh number and magnetic field enhances heat transfer, while the presence of fins, especially at N = 2, may inhibit convection currents and reduce heat transfer efficiency. These findings provide valuable insights into optimizing nanofluid-based cooling systems and highlight the trade-offs in incorporating fins in thermal management designs. [ABSTRACT FROM AUTHOR]

In industrial applications, annular fins are commonly made of homogeneous materials such as aluminum, struggling to provide uniform temperature distribution along their length. Recognizing the potential of Functionally Graded Materials (FGMs) to enhance thermal performance by combining two different materials with a gradual variation, this study proposes their use as fin materials to achieve optimum performance. The study consists of three major components: (1) numerical analyses to determine the optimum volume composition of FG fins, (2) the fabrication process of aluminum and FG fins utilizing powder metallurgy and the hot-pressing technique, and (3) experiments to evaluate the thermal performance of FG and aluminum fin arrays attached to a horizontal cylinder of 250 mm length under natural convection. Heat ranging from 25 W to 150 W is applied to the cylinder during these experiments. Based on the experiments, the thermal performances of fins are evaluated in terms of net free convection heat transfer rate, the Nusselt number, and fin effectiveness. Overall, experimental results demonstrate that the net convection heat transfer rate depends on fin spacing, material, and the base-to-ambient temperature difference. Specifically, FG fin arrays enhance the net heat transfer rate by 59%, while aluminum fin arrays increase it by 33% compared to finless cylinders. Moreover, FG fins outperform aluminum fin arrays by 40% in convective heat transfer coefficient h. Due to being the first experimental study, this study sets itself apart. [ABSTRACT FROM AUTHOR]

• 3D ice storage spheres with different metal foam methods and proportions are designed. • Solidification performance of PCMs augmented by partially metal foam is studied. • The competitive mechanism of natural convection and heat conduction is analyzed. • Considering the economic benefit, the optimal filling radius 6/13 is obtained. The advancement of ice-ball thermal energy storage systems is limited by the poor thermal conductivity of phase change materials(PCM). This paper presents a numerical investigation into enhancing heat transfer in ice balls by partially filling them with metal foam. Dynamic temperature changes, solid phase fraction, and cold storage capacity are analyzed for various filling radius ratios (2/13, 4/13, 6/13, 8/13, and 13/13). We quantitatively assess the specific impact of metal foam filling on heat transfer by calculating changes in the comprehensive thermal conductivity coefficient. Our findings reveal that the comprehensive thermal conductivity coefficient increases nonlinearly with the growing metal foam filling radius ratio, indicating that full filling may not the most optimal configuration. Furthermore, the energy storage capacity per unit time, per unit weight and per unit cost of the ice ball filled with metal foam under different radius ratios was evaluated by comprehensive evaluation criteria, and the optimal filling radius ratio was determined to be 6/13. Contrary to prior findings, this research highlights the efficacy of partial filling strategies, offering valuable insights for optimizing ice ball performance in thermal energy storage applications. [ABSTRACT FROM AUTHOR]

Free convective heat transfer created from two aligned cylinders immersed inside a vented air duct is experimentally investigated. The experiments include the measurements of cylinders temperature and the air temperature inside the enclosure under steady, turbulent, and incompressible flow properties by using steady‐state heat equations. The studied parameters include Rayleigh number (105≤Ra≤3.4×106 ${10}^{5}\le {Ra}\le {3.4\times 10}^{6}$), opening sizes at lower and upper enclosure surfaces (0.146≤O≤1 $0.146\le O\le 1$), and space size between cylinders (0.35≤S≤0.532 $0.35\le S\le 0.532$) with the constant ratio of enclosure width to cylinder diameter equal to 6. The findings displayed that the average air temperature inside the enclosure for the low values of S and O is low, and it rises as S is raised. The behaviors of Nu differ with changing Ra values. An interaction between hot cylinder and cold cylinder inside the enclosure is observed that depends on O and S values, and hence, they have a large impact on fluid temperature. The data indicated that Nu ${Nu}$ rises with the Ra ${Ra}$ for all S $S$ and O $O$ values. The value of Nu ${Nu}$ for each cylinder depends on the values of S $S$ and O $O$. The maximum Nu ${Nu}$ value has been obtained when O=0.439 $O=0.439$ and S=0.35 $S=0.35$ with maximum enhancement between 30% and 50% depending on Ra values as compared with O=0.146 $O=0.146$ and S=0.523 $S=0.523$, whereas the minimum average Nu ${Nu}$ has been indicated when O=0.146 $O=0.146$ and S=0.35 $S=0.35$. The profiles of Nu ${Nu}$ reveal that O $O$, Ra ${Ra}$, and S $S$ have a considerable influence on heat transfer. [ABSTRACT FROM AUTHOR]

Analysis of various accident scenarios is vital for the safety assessment of nuclear fuel storage facilities. The accidents in the storage vault due to loss of cooling are generally considered highly uncertain since the accident progression is slow (in comparison to reactors) and allows time for remedial activities to the operator. In the present work, numerical simulations of different accident scenarios have been carried out for a short duration to understand the situation better. Thermal aspects of accident conditions such as failure of the suction blower, drying of cooling water at the chiller, and combined effect of both accidents were investigated. The airflow inside the ventilated enclosures due to the failure of the blower and the rise in inlet air temperature is analyzed numerically. The temperature distributions inside the vault and the rise in temperature of the sub-assemblies and magazines have been studied. The key mechanisms of heat transfer, which take part in nuclear fuel storage vault for post-accident conditions, were identified. The study will be helpful to classify various accident conditions based on their thermal implications and the model developed can be used to design passive cooling systems. [ABSTRACT FROM AUTHOR]

This research aims to enhance convective thermal transport in an inverted T-shaped porous enclosure filled with a water-based hybrid nanofluid, incorporating a circular cylinder at different vertical locations (Case C1-no cylinder, Case C1-cylinder at (0.5, 0.25), Case C2-cylinder at (0.5, 0.5), Case C3-cylinder at (0.5, 0.75)). The numerical investigation employs the penalty finite element technique to simulate the Darcy–Brinkmann–Forchheimer-based mathematical model. Moreover, the complete results of streamlines, isotherms, mean Nusselt number (Num), and thermal enhancement percentage ( En % ) are analyzed at the broad range of flow parameters, including Rayleigh number ( Ra = ( 10 3 − 10 6 ) ), Darcy number ( Da = ( 10 − 5 − 10 − 2 ) ), and porosity value ( ϵ = (0.1 − 0.9) ). Initial comparative investigations of different configurations (C0–C3) at selected Ra values reveal that case C1 exhibits significant potential for enhancing convective heat transport phenomena. Consequently, only case C1 physical domain has been explicitly analyzed for convective heat and fluid flow characteristics at the selected range of flow parameters. Further, it is analyzed that the increasing range of Ra, Da, and ϵ enhances the convective heat and fluid flow phenomena. Furthermore, the comparative study of Num and En % for case C1 against the simple case C0 reveals substantial improvements as Ra, Da, and ϵ increase. The En % for Da and Ra reaches up to 97%, while a maximum of 25% improvement is observed with varying values of ϵ. These findings highlight the promising opportunities to optimize convective thermal transport in the investigated system, mainly through adopting case C1. [ABSTRACT FROM AUTHOR]

The MHD finite element analysis naturally convective flow across an exponentially accelerating plate with viscous dissipation is investigated numerically. In this process dimensional partial differential equations are changed to dimensional less form. The Galerkin finite element method is emerged to solve non-dimensional partial differential equations. Obtained results are effectively depicted through the utilization of graphs, allowing for a comprehensive understanding of the impact that different physical parameters on primary velocity, transverse velocity, temperature, and concentration profiles. The study effectively differentiated between the present and prior findings, ultimately demonstrating a strong consensus of excellent agreement between the results. The key findings of this study are: The primary velocity increases on growing the values of Thermal Grashof number, Solutal Grashof number, Eckert number, and Dufour number and decreases on climb up the values of Magnetic parameter, Prandtl number, Schmidt number, and Hall parameter. The secondary velocity increases on raising the values of Thermal Grashof number and Solutal Grashof number and diminishes on enhancing the value of Hall parameter. The temperature increases on increasing the values Eckert number and Dufour number and decreases on improving the value of Prandtl number. The concentration decreases on increasing the value of Schmidt number. [ABSTRACT FROM AUTHOR]

The extended Brinkman model is employed in this study to investigate the instability of double diffusion natural convection in porous layers caused by vertical variations in boundary temperature and solute concentration. The stability of fluid flow is determined by discussing the temporal evolution of normal mode disturbances superposed onto the fundamental state. The linear dynamics problem is formulated as an Orr–Sommerfeld eigenvalue problem and solved numerically using the Chebyshev collocation method. The effects of thermal/solute Darcy–Rayleigh number (RaT/RaS), Lewis number (Le), and Darcy–Prandtl number (PrD) on system instability are analyzed. Growth rate curves indicate that solute Darcy–Rayleigh numbers can induce flow instability. Neutral stability curves show that increasing RaT/RaS promotes instability. There is a critical threshold for Le, exceeding this amplifies instability, while falling below suppresses it. For large RaT values, varying PrD leads to different effects of increasing RaS on flow stability. The stability of the system is significantly dependent on RaT and RaS, with the critical value of the Le playing a decisive role in system stability. Additionally, PrD significantly affects system instability under certain conditions. [ABSTRACT FROM AUTHOR]

The behavior of non-Newtonian power-law nanofluids under free convection heat transfer conditions in a cooled square enclosure equipped with a heated fin is investigated numerically. In particular, the impact of nanofluids, composed of water and Al₂O₃ , TiO₂ , and Cu nanoparticles, on heat transfer enhancement is examined. The aim of this research is also to analyze the influence of different parameters, including the Rayleigh number (Ra = 104− 106), nanoparticle volume fraction (φ = 0% − 20%), non-Newtonian power-law indexes (n = 0.6 − 1.4), and fin dimensions (Ar = 0.3, 0.5, and 0.7). Streamlines and isotherms are used to depict flow and related heat transfer characteristics. Results indicate that thermal performance improves with increasing Rayleigh number, regardless of the nanoparticle type or nanofluid rheological behavior. This suggests that the buoyancy force has a significant impact on heat transfer, particularly near the heat source. The Nusselt number is more sensitive to variations in Cu nanoparticle volume fractions compared to Al₂O₃ and TiO₂. Moreover, the average Nusselt numbers for power-law nanofluids with n < 1 (n > 1) are greater (smaller) than for Newtonian fluids due to the decrease (increase) in viscosity with increasing (decreasing) shear rate, at the same values of Rayleigh number Ra owing to the amplification (attenuation) of the convective transfer. Notably, the most substantial enhancement is observed with Cu–water shear-thinning nanofluid, where the Nusselt number increases by 136% when changing from Newtonian to shear thinning behavior and by 154.9% when adding 16% nanoparticle volume fraction. Moreover, an even larger increase of 57% in the average Nusselt number is obtained on increasing the fin length from 0.3 to 0.7. Graphic Abstract [ABSTRACT FROM AUTHOR]

This paper focuses on the emerging branch of the deep learning technique that is employed in the various simple and nonlinear mathematical models of one and two-dimension. This numerical technique takes advantage of the backpropagation algorithm and computational graph of deep learning. A computational ability of a feedforward neural network (FNN) has been further employed, which utilized the randomly or uniformly sampled collocation points over the physical domain and different boundary conditions. Furthermore, a loss function is formulated based on the mathematical model and boundary conditions which is further enforced to minimize the unlabeled sampled points. The minimization process of the loss function is achieved through the various optimizer during the backpropagation algorithm. Eventually, the training process of FNN completes after getting an admissible error for the solution. Multiple examples are tested and cross-validated with the exact solutions for the problem. Furthermore, the DL-based solutions have a good agreement with the solution obtained from finite element approach, indicating that the DL-based numerical techniques can be considered an alternate numerical technique for solving various mathematical models. [ABSTRACT FROM AUTHOR]

Copyright of Coal Geology & Exploration is the property of Xian Research Institute of China Coal Research Institute and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

AbstractThe innovative design of the AP1000 power plant has various layers of passive safety systems aiming to enhance reactor safety during normal and transient conditions. The passive containment cooling system (PCCS) is a safety-related system capable of removing heat from the steel containment vessel (SCV) to the atmosphere and preventing the containment from exceeding the design pressure and temperature following a postulated design-basis accident. The PCCS heat removal mechanisms include condensation on the internal SCV surface, heat conduction, natural convection, evaporation of water film, and radiative heat transfer. In two basic postulated scenarios, the reactor decay heat can ultimately be removed from the SCV only by air natural convection. The first scenario occurs 72 h following a large-break loss-of-coolant accident (LBLOCA) when the passive containment cooling water storage tank becomes unavailable. The second scenario occurs following a postulated loss of shutdown decay heat removal event. Hence, investigating the thermal-hydraulic behavior of the containment under transient conditions is essential to ensure its safety and integrity. In this study, a simplified three-dimensional model using ANSYS FLUENT is developed to investigate the cooling capability of air natural convection outside the SCV during a LBLOCA event. Because of the lack of experimental data, code-to-code validation was performed using the actual results of AP1000 alongside other research findings. The results show good agreement with available data, which can be used for future research. [ABSTRACT FROM AUTHOR]

This paper explores natural convection heat removal performance in accordance with the variation of the baffle size and position in a skewed cavity. In this skewed cavity, the top and bottom walls are considered to be adiabatic. The inclined left wall is deliberated at a sinusoidal cool temperature, and the other wall is treated at a hot temperature. The baffle is connected to the hot temperature wall. The dimensionless governing equations will be solved by the Galerkin weighted residual (GWR) technique of the finite element method. The influence of Rayleigh number (103≤Ra≤106), baffle sizes (L=0.20, 0.35, and 0.50), and baffle positions (B=0.25, 0.50, and 0.75) in a fluid with Pr=1.41 were investigated in this research. The comparisons between the outcome of this work and previously published work in a literature review by Elatar et al.8 have been produced to examine the reliability and consistency of the data. The results of the simulation are represented by streamlines, isotherms, local and mean Nusselt numbers, mean fluid temperature, and baffle effectiveness. The results demonstrate that as the Rayleigh number grows, the heat removal performance rate continues to develop in this study. Also, the results revealed that the heat transport rate decreased when gradually raising the baffle length. Baffles can significantly improve the mixing of fluid inside the enclosure, which can mean reductions in reaction times and operating costs, along with increases in heat exchange and efficiency. [ABSTRACT FROM AUTHOR]

This paper reports the numerical study of natural convection in a square enclosure filled with CNT-water nanofluid and exposed to a uniform external magnetic field. Heating is ensured by twothin fins. Using the control volume method, the effects of the fins position, their length and spacing as well as the solid volume fraction, the Rayleigh number and the Hartmann number on the thermal performance of the cavity were examined. The results obtained show that the heat transfer rate increases with the Rayleigh number, solid volume fraction and fins length; but decreases with Hartmann numbers. A comparison is also carried out between the results obtained from the Maxwell and Xue models. The results prove that the mean Nusselt number is higher based on the Xue model. [ABSTRACT FROM AUTHOR]

This work is devoted to the study of the influence of height and the number of heaters on the nature of the flow and isotherms in a three-dimensional cube filled with Al2O3/H2O nanofluid with a volume fraction of 1% at Pr = 7.06586. Numerical simulation was performed on the base of the numerical finite volume method and the coupled scheme. It simulated the natural convection with nanofluid. Verification of the mathematical model was performed by comparing the results with the results of other authors. Having obtained satisfactory results, numerical results of U and V velocities, temperature contours and calculations of average Nusselt numbers for six cases of the main problems were obtained. [ABSTRACT FROM AUTHOR]

This paper introduces an innovative approach for modelling unsteady incompressible natural convection flow over an inclined oscillating plate with an inclined magnetic effect that employs the Atangana-Baleanu time-fractional derivative (having a non-singular and non-local kernel) and the Mittag-Leffler function. The fractional model, which includes Fourier and Fick's equations, investigates memory effects and is solved using the Laplace transform. The Mittag-Leffler function captures power-law relaxation dynamics, which improves our understanding of thermal and fluid behaviour. Graphical examination shows the influence of fractional and physically involved parameters, leading to the conclusion that concentration, temperature, and velocity profiles initially grow and then decrease asymptotically with time. Moreover, the study emphasizes the impact of effective Prandtl and Schmidt numbers on temperature, concentration, and velocity levels in the fluid. [ABSTRACT FROM AUTHOR]

This computational study looks at the dynamics of free convection in a differentially heated square chamber occupied by ionized propane and saturated permeable partition. The modified Navier–Stokes equations and temperature equations are used to describe fluid and porous domain flow and heat transport phenomena. To solve these equations, the Galerkin finite element technique is used. Parametric adjustments are made for various heat source and sink lengths, Rayleigh number, Hartman number, and Darcy number. The results are quantitatively described in terms of the mean Nusselt number along the heated wall as the Rayleigh number increases (104 ≤ Ra ≤ 106). Streamlines and isotherms are used to visualize qualitative insights on these parametric changes. A comparative study is also performed without the porous media. Conclusive data demonstrate that using a permeable partition over a solid partition improves the mean Nusselt value by 26.28% at Ra = 104 and to a highest value of 56.5% at Ra = 106. Notably, this work presents a sensitivity analysis based on response surface methodology, demonstrating subtle connections between magnetohydrodynamics, Rayleigh number, and porous material effects. These findings provide important perspectives for improving thermal control and energy efficiency in advanced magnetohydrodynamic systems. [ABSTRACT FROM AUTHOR]

AbstractThis article presents a numerical investigation and analysis of the cooling effectiveness of thermomagnetic transient natural convection in a long channel, equipped with four cylindrical heat-generating blocks. A non-Newtonian power-law ferrofluid was employed for the present investigation to achieve optimum cooling. The governing equations are the continuity equation, the momentum equation and the energy equation. The finite volume method was used to solve the resulting algebraic system. From an energy-saving point of view, this configuration can provide a good approximation for selecting effective physical and geometrical parameters to design a reliable thermal system. For this purpose, the study was carried out for various geometric and thermophysical parameters. Different values of thermal conductivity, power law index, Rayleigh number, Hartmann number and ferrofluid volume fraction, were considered. The results are illustrated in the form of streamlines, isotherms, average Nusselt and a spatio-temporal characterization of the mean ferrofluid velocity. From the results presented, we can conclude that the choice of non-Newtonian, pseudoplastic ferrofluid with a low thermal conductivity ratio subjected to a uniform magnetic field proves to be a crucial solution for efficient and stable cooling of heat-generating cylindrical blocks, which will have to be close to the cold walls of the channel. [ABSTRACT FROM AUTHOR]

Buoyancy-driven flow and heat transfer characteristics of the solid/hollow cylinders with concave shapes were numerically analyzed in a turbulent regime. The effects of Ra , L / D , and D th / D on heat dissipation have been studied in the range of 1010 to 1012, 2 to 10, and 0.2 to 0.9, respectively. It has been found that the Nu ¯ increases with Ra for solid/hollow cylinders. For a hollow cylinder, Nu ¯ in is always higher than Nu ¯ out except at D th / D = 0.2. The Nu ¯ in of a hollow cylinder increases up to D th / D = 0.6, irrespective of the Ra , and L / D ratios thereafter reduced drastically has been observed. Whereas, at a low D th / D , and high Ra (i.e., Ra ≥ 1011), Nu ¯ out of a hollow cylinder significantly decreases with D th / D . However, it shows a marginal decrement at a high length-to-diameter ratio. For solid and hollow cylinders, the thermo-fluid dynamics have been delineated through the temperature contours, streamline patterns, and vortex generation at the inner as well as outer wall of the hollow cylinder. This numerical study also proposes a correlation for the Nu ¯ of the solid/hollow cylinders to have an accuracy ± 6 % of relevant parameters. [ABSTRACT FROM AUTHOR]

Tea is an important industrial crop. It is the second most popular among all the drinks. The drying operation in the tea industry fulfills the aim of enzyme inactivation and reducing the moisture content to the desired level. The energy consumption in drying operation in the tea industry is mostly in the form of thermal energy. Drying consumes a greater amount of energy than other processes in tea industries. Thermal energy needs are met mainly through fossil fuels. Renewable energy sources such as bioenergy and solar energy are also being adopted but at the minute level. Further, addressing problems such as stewing and case hardening (arises due to improper drying conditions) during drying is necessary to avoid quality loss. In this study, mass transfer modeling of drying of crush tear curl (CTC) tea particles is conducted considering natural convection around the tea particle. A finite difference method with an explicit scheme is used to solve the equations for mass transfer modeling of drying. The effect of drying air temperatures on moisture content, moisture ratio, and drying rates are computed. Drying air temperatures such as 80, 90, and 100°C have not shown effective drying. However, drying at air temperatures of 110, 120, and 130°C are recommended for drying times of 1500 s, 1200 s–1500 s, and 1200 s, respectively. Additionally, the effect of the size of the particles is studied and the lower size of tea particles is recommended for better drying characteristics. The current drying model can be used for single tray/conveyor dryers and indirect natural convection single tray solar dryer. Practical applications: The present research work demonstrates the important information for the hot air drying of CTC tea particle in single tray dryer. The drying modeling results can be used to set the proper temperature level of drying air being sent inside the dryer to avoid the under and over‐drying of tea particle and achieve the desired level of moisture content in the tea particle. Thus, the present study helps in deciding drying conditions such as drying temperature, drying duration for CTC tea particle in single tray dryer, slow speed conveyor dryer, and also in indirect natural convection single tray solar dryer. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Xi'an Jiaotong University is the property of Editorial Office of Journal of Xi'an Jiaotong University and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Ordnance Industry Automation is the property of Editorial Board for Ordnance Industry Automation and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Predicting the air flow pattern with proper accuracy and speed inside a building with natural ventilation is one of the important study topics of building design due to the economic importance of energy consumption. For this purpose, in this study, a chamber with certain dimensions and with natural connection has been investigated as a study sample to predict the air flow pattern and speed distribution with the help of regional models. Two air inlet and outlet valves were considered for natural air ventilation. After researching the previous models, the three-dimensional zone model coupled with heat transfer and air flow calculations (ZAER) was chosen as the basis for comparing the modeling results. In the following, after zoning, to improve the flow coefficient factor model, which is assumed to be a constant number, it was assumed to be variable and the results were recorded in different states. The behavior of the model has been checked in the flow coefficients between 0.3 and 1 in order to obtain the most optimal coefficient for the number of suitable cells. Comparing the results of the research with the results of other models and computational fluid dynamics (CFD) showed that the three-dimensional behavior of the flow shows better compatibility with the experimental researches. [ABSTRACT FROM AUTHOR]

The Buongiorno nanofluid model serves as a foundational model for theoretical and experimental research in the field of nanofluids, and this model can be applied to various engineering problems, including heat exchangers, biomedical applications, solar collectors, nuclear reactors, and different cooling systems in the automotive and electronics industries. The use of nanofluids in the Eyring-Powell fluid over a squeezed sensing surfaces is a vital area of research for the design and improvement of microfluidic devices and sensors, which find widespread usage in industrial and medical applications. The main purpose of this work is to note the augmentation in thermal conductivity by using the Buongiorno nanofluid model along with the natural convective flow of non-Newtonian Eyring-Powell fluid that is moving on the squeezed sensory surface along with slip velocity. The viscosity of a fluid is assumed to be dependent on temperature. The Cattaneo-Christov heat and mass flux and chemical reaction are assumed to determine the combined effect of heat and mass transport. The governing model of equations is in the form of dimensional partial differential equations, and we have to convert these equations into ordinary differential equations; therefore, a set of similarity transformations is adopted for making the equations into dimensionless form. The numerical results were obtained by adopting the predictor and corrector multistep method, namely the ‘Adams-Bashforth’ technique, in Matlab software. The use of natural convective flow enhances the velocity region. The velocity slip parameter increases the velocity of the fluid, whereas the viscosity parameter drops the velocity profile. The thermophoresis and Brownian motion parameters are the sources of the increment in the temperature region. The thermal relaxation and solutal relaxation parameters are the sources of decline in the temperature region. The squeezing parameter is the source of reduction in the skin friction, whereas the result indicates that the fluid parameter, Grashof number, and viscosity coefficients increase the skin friction.

This study conducts a comprehensive numerical investigation into enhancing thermal transfer within square enclosures filled with water-based oxide nanoparticle suspensions, subjected to central sinusoidal heating. Further flow configuration, influenced by an inclined magnetic field, is designed with a focus on enhancing thermal efficiency for engineering applications. Key innovations include the application of sinusoidal heating elements to enhance thermal performance significantly. Computational analysis supported by finite element analysis, quantifies the impact of these parameters on flow dynamics and thermal transmission, presenting a substantial advance in the understanding of nanofluid-filled enclosure thermal management. The study reveals that the undulation of the heating element plays a crucial role in the heat transfer rate, with improvements observed as undulation increases. The introduction of magnetic fields further controls flow distribution and buoyancy effects, as demonstrated by our findings that an increase in the Rayleigh number correlates with enhanced convection, dominating the cavity's thermal dynamics. Additionally, the report outlines the conditions under which the Nusselt number increases, indicating enhanced thermal performance. These insights are pivotal for designing optimized heat transfer systems and energy-efficient applications, setting a new benchmark for thermal management strategies in practical engineering contexts. [ABSTRACT FROM AUTHOR]

This paper explores the effects of egg orientation and yolk position during thermal processing using computational fluid dynamics simulation and experimentation. A carboxymethyl cellulose suspension was used to simulate the egg white, and a two‐dimensional model incorporated an air cell near the larger end. The simulation included four cases: two focused on vertical orientation with the yolk at the rear shell and the geometric center, and two on horizontal orientation with similar yolk positions. Repositioning the yolk in a horizontal orientation near the eggshell resulted in significant temperature variations. The findings show that a horizontal egg position, especially with the yolk near the eggshell, led to a significant 8%–16% reduction in heating times. This configuration also improved pasteurization efficiency, assessed by the F value, by about 13.8%. The study also revealed distinct flow patterns influenced by buoyancy forces, significantly related to temperature distribution inside the egg. [ABSTRACT FROM AUTHOR]

The current study explores the thermal performance and geometric optimization of radial heat sinks manufactured through selective laser melting process of AlSi10Mg material, primarily intended for cooling applications in light-emitting diodes (LEDs). Few studies have systematically approached the geometric optimization of radial heat sink designs, particularly considering variable fin heights (both fin outer and fin inner height), in conjunction with other geometric parameters like fin length, fin thickness, and the number of fins tested across a broad spectrum of heat flux values. Through comprehensive experimentation and numerical simulations, the independent and combined impact of these considered key geometric parameters was investigated on the heat sink performance. The experimental design, guided by Response Surface Methodology, encompasses a wide range of heat flux levels, varying from 300 to 1800 W/m2, to ensure the broad applicability of the findings. The results underscore the significance of fin thickness, which notably influences the base temperature of the heat sink, particularly at higher heat flux levels. The interaction between heat flux and fin length also plays a pivotal role in base temperature control, with additional fins contributing to lower temperatures. Furthermore, it was revealed that higher fin outer heights, combined with lower fin inner heights, lead to superior heat sink performance, aligning with practical LED cooling requirements. The optimization process results in configurations that consistently maintain base temperatures below the critical 70 °C threshold, thus contributing to effective thermal management in LED devices. [ABSTRACT FROM AUTHOR]

Non-Newtonian fluids within heterogeneous porous media may give rise to complex spatial energy and mass distributions owing to non-local mechanisms, the modeling of which remains unclear. This study investigates the natural convection heat and mass transfer of non-Newtonian fluids in porous media, considering the Soret and Dufour effects. A strongly coupled model is developed to quantify the coupled transport of energy and reactive pollutants with the non-Newtonian fluid. The constitutive equation for the non-Newtonian fluid is described by a two-sided Caputo type space fractional velocity gradient. The governing equation, with a symmetric diffusion term, is effectively solved using a stable and convergent shifted Grünwald–Letnikov formula. The influences of three important parameters, which are the average skin friction coefficient, the average Nusselt number, and the Sherwood number, on fluid heat and mass transfer are calculated and analyzed. Numerical results reveal a significant interaction between the fractional derivative and the buoyancy ratio number, both of which affect the average skin friction coefficient. Furthermore, the average Nusselt number increases with the Dufour number while decreasing with the average Sherwood number. These findings enhance our understandings of the dynamics of energy and mass co-transport in non-Newtonian fluids, particularly in relation to their constitutive equation featuring spatial non-local properties. [ABSTRACT FROM AUTHOR]

The Particle Image Velocity method was used to investigate the velocity fields when the liquid layer height changed from 0.6 to 5.1 mm. The loss of stability of the velocity field during local heating is realized at the Bond number (Bo) 0.01–0.02, which is 10–20 times lower than the critical value of Bo(cr) compared to heat exchange at a uniform wall temperature. The Marangoni flow depends both on the height and the layer diameter. The critical height of the layer 2–2.5 mm leads to a sharp change in the flow pattern. [ABSTRACT FROM AUTHOR]

Abstract The work numerically investigated laminar natural convection heat transfer from the single sphere with a constant heat flux surface in air over the wide range of Grashof number ( $$10 \le Gr \le 10^{7}$$ 10 ≤ G r ≤ 10 7 ). The more efficient and precise numerical method based on Bejan et al. was employed here, the accuracy of which has been confirmed through validation against a single sphere case. The heat transfer characteristics were systemically analyzed in terms of isothermal contours and streamlines around the sphere, dimensionless temperature and velocity profiles. Additionally, local Nusselt number as well as local pressure and friction drag coefficients were studied with different Grashof number. In comparison to the sphere with uniform heat flux surface, the heat transfer from the isothermal sphere was found to be enhanced attributable to a more robust buoyancy force and a steeper temperature gradient. Moreover, the average Nusselt number for the sphere with a constant heat flux between 60.4 and 98.6% of the isothermal sphere’s value, this range being contingent upon the specific Grashof number. What’s more, the proposed correlation addresses a notable void in the predictive understanding of heat transfer from the sphere with uniform heat flux, which is scenario prevalent in various engineering applications, particularly for the cooling of electrical and nuclear systems, and offer values for academic research.

The heat transfer by natural convection of a nanofluid, which is ethylene glycol−Al2O3 has been analyzed in an open cavity numerically using the multiple-relaxation-time - lattice Boltzmann method by the graphics processing unit high-performance parallel computing. The right side of the cavity is open, and different boundary conditions have been applied to all the walls. Besides, one adiabatic fin has been installed on each side of the enclosure’s top and bottom sides. Here, the Prandtl number is fixed at 16.6, and the Rayleigh number changes from 104−106 with the nanoparticle volume fraction from 0%−5% has been used for numerical simulations. Besides, in this work, the power-law index is an important parameter as well, and 0.7, 0.8, 1, 1.2, and 1.4 are the values of this parameter. Results are presented concerning both the average and local Nusselt numbers in the form of streamlines, isotherms, temperature distributions, velocity distributions, heat transfer rate, and entropy production. It is observed when increases, average Nusselt number increases 607.94%, and for this reason, the overall heat transfer rate rises because of buoyancy force. In addition, the average Nusselt number falls by 83.28% when the power-law index rises; as a result, the total heat transfer rate falls because fluid viscosity increases with the power-law index. It is also observed that for shear-thickening fluids, the temperature gradient is higher. On the contrary, the temperature started decreasing with the increase of the power-law index. Additionally, the local Nusselt number value rises as power-law index falls. Moreover, the heat transfer rate increases by 7.08% when volume fraction increases. The intensity of buoyancy force reduces with the increase of volume fraction. Besides, the overall entropy generation rises when the Rayleigh number and the volume fraction increase, but it decreases when the power-law index increases. So, when the Rayleigh number is 106, the power-law index is 0.7, and the volume fraction is 0.00 then the entropy generation is the highest. This current research has many applications for example heat exchangers, electronic cooling equipment, solar heating systems, aerospace applications, medical devices, and entropy generation-related systems.

The cellular automaton-lattice Boltzmann method-immersed moving boundary coupled model is established to study the microstructure evolution during the solidification process of 2009Al/SiCp. After several model benchmarks, the natural convection of liquid phase and its effect on particle settlement under different pulling velocities were studied firstly. The results showed that at higher pulling velocity, the particle decelerates downward before contacting with dendrite front due to intensified natural convection. At lower pulling velocity, the particle decelerates gradually until a change in direction and upward movement. As the particle approach the tip of the dendrite, the particle experiences a brief upward movement before contacting the dendritic front. Then the convection induced by particles has an impact on the distribution of solutes in the liquid phase. It has been observed that at lower pulling velocity, there is a significant difference in solute distribution at the solidification front. The primary reason for this phenomenon is the higher solute concentration near the solidification front at lower pulling velocity, rather than the higher liquid phase flowing rate. Finally, our model investigated the microstructure evolution process during the directional solidification process of 2009Al/SiCp at different pulling velocities. The results indicate a good agreement between the simulation results and experiment observations.

Natural convection is numerically studied in a triangular cavity whose inclined walls that is isothermal at temperature TC, while its base is thermally insulated. The cavity contains a hot isothermal cylindrical heat source TH of diameter D. In this study, we used the nanofluid (water + TiO2). The nanoparticle volume fraction is varied within the range 0.01 ≤ ϕ ≤ 0.05, and the Rayleigh number is set between 103 and 106 . The main objective of this study is to explore the impact of nanoparticle concentration, Rayleigh number (Ra), and heat source position (h) on the enhancement of convective thermal transfer. The simulation results show that thermal exchange improves with increasing Ra, heat source diameter, and nanoparticle volume fraction (ϕ).

This paper introduces an innovative analytical model to compute flame velocities and temperatures within a premix burner in a domestic gas oven. This model significantly streamlines the heat transfer simulation process by simplifying the modeling of the thermo-chemical energy release during combustion, effectively reducing complexity and computation time. Accelerated solutions are essential at the initial design stages when comparing the effect of the oven parameter variation on the overall performance. The validation of the proposed analytical model involved experimental assessments of the temperature of the false bottom plate in a natural gas oven. The resulting data were then compared against CFD simulations performed utilizing the proposed model. The results revealed a marginal discrepancy of 4% between the experimental measurements and the outcomes generated by the model. Simulations were executed under differing conditions, encompassing scenarios with and without radiation effects. This exploration identified natural convection as the predominant heat transfer mechanism, with heat radiation contributing only modestly to the heating of the false bottom plate. Among its advantages, the proposed model offers a notable reduction in the numerical complexity of the modeling of the combustion process. Furthermore, its straightforward integration into numerical simulations involving premixed flames underscores its practical utility and versatility in evaluating design performance at the early stages of the design. Highly accurate models can be left for the final oven configuration validation.

Abstract Natural convection in a square porous cavity with a partial magnetic field is investigated in this work. The magnetic field enters a part of the left wall horizontally. The horizontal walls of the cavity are thermally insulated. The wave vertical wall on the right side is at a low temperature, while the left wall is at a high temperature. The Brinkman-Forchheimer-extended Darcy equation of motion is utilized in the construction of the fluid flow model for the porous media. The Finite Element Method (FEM) was used to solve the problem’s governing equations, and the current study was validated by comparing it to earlier research. On streamlines, isotherms, and Nusselt numbers, changes in the partial magnetic field length, Hartmann number, Rayleigh number, Darcy number, and number of wall waves have been examined. This paper will show that the magnetic field negatively impacts heat transmission. This suggests that the magnetic field can control heat transfer and fluid movement. Additionally, it was shown that heat transfer improved when the number of wall waves increased.

This study examines the heat and mass transfer aspects of the natural convective flow of a nanofluid along a vertical flat surface, incorporating electrified nanoparticles and electric Reynolds number. While conventional nanofluid models like Buongiorno’s model overlook the nanoparticle electrification and electric Reynolds number mechanisms, this study addresses the nanoparticle electrification and electric Reynolds number mechanisms by justifying its relevance, particularly when tribo-electrification results from Brownian motion. This incorporation of the electric Reynold number and nanoparticle electrification mechanism is a unique aspect of this investigation. Using the similarity method and nondimensionalization, the governing partial differential equations of the flow are transformed into a set of locally similar equations. MATLAB's bvp4c solver is employed to solve this set of equations, along with the boundary conditions. The obtained results are validated by comparison with those from previously published works. Graphical representations are provided for the numerical outcomes of non-dimensional velocity, concentration and temperature concerning the nanoparticle electrification parameter and electric Reynolds number. The combined effects of the nanoparticle electrification parameter and the electric Reynolds number on non-dimensional heat and mass transfer coefficients are examined in tabular form. Furthermore, the impact of the nanoparticle electrification parameter on both heat and mass transfer for varying values of the Brownian motion parameter is explored graphically. The primary finding of this investigation indicates that the electrification mechanism of nanoparticles quickens the transfer of heat and mass from a flat surface to nanofluid, suggesting promising prospects for utilization in cooling systems and biomedical applications.

This study investigates fluid flow and natural convection heat transfer in a parallelogram-shaped cavity with a porous medium under non-uniform temperature condition. The bottom wall is heated with a non-uniform temperature, the side walls are cooled, and the upper wall is adiabatic. The governing equations, along with corresponding boundary conditions, are formulated in dimensionless stream function and vorticity using the extended Darcy model for the porous medium. The equations are solved by employing the finite difference method. The study presents outcomes for isotherms, streamlines, and Nusselt numbers across range of parameters, including the Rayleigh number (104≤Ra≤108), Darcy number (10−1≤Da≤10−6), Prandtl numbers (Pr=0.71,1,7.1), fluid porosity (ϵ=0.8), and inclination angles (30∘≤ϕ≤90∘), about flow and heat transfer characteristics. The results indicate that an increase in Ra, Pr, and ϕ, along with a decrease in Da, leads to an enhancement in the strength of vortexes. It is observed that for constant Ra⁎=RaDa, Rate of heat transfer increases with an increase in Ra and a decrease in Da. The maximum value observed is 10.15. Also rate of Heat transfer increases with the increase in angle and maximum rate of heat transfer is observed at ϕ=90∘.

Convection heat collector technology is a promising technology for drying agricultural products. The study aims to determine the temperature characteristics, energy efficiency, and thermal discharging of a flat plate-type collector using double-glazing technology integrated with heat storage material in the state of iron scraps in passive and active modes. Investigation was conducted for seven hours of exposure under the sun (08:00-15:00 local time). Ten temperature sensors and four humidity sensors were used during measurements to determine the thermal characteristics of the heat collector. The density of iron scraps as heat storage material is 250 kg/m3 with an irradiation time of seven hours. The results indicate that the passive mode of operation has a higher temperature characteristics than the active mode. During irradiation process, the highest temperatures on the absorber in active and passive modes were 63°C and 55°C, respectively. Meanwhile, the highest temperatures on the TES in passive and active modes during irradiation were 55.6°C and 50.6°C, respectively. The energy efficiency of the collector ranges from 23.3-55.1% (passive) and 18.6-40.7% (active). The energy efficiency of the TES (Thermal Energy Storage) has a range of 7.4-22.7% (passive) and 7.4-13.0% (active). During discharging process, it shows that the TES in passive mode can store heat for 275 minutes and active mode for 95 minutes. Heat collectors that used double glazing technology and heat storage materials using iron scraps with a density of 250 kg/m3 have significant potential to extend the drying duration of agricultural products with limited exposure to sunlight and environmentally friendly heat collectors.

AbstractThis investigation aims to scrutinize the flow and heat transfer characteristics of a hybrid nanofluid composed of Ag-MgO within an eccentric annular space, where the inner circular wall is held at a constant elevated temperature and the outer circular wall is uniformly cooled. Natural convection in such eccentric annular enclosures, with thermal radiation and the effects of heat generation/absorption taken into consideration, plays a vital role in various engineering applications, including solar collectors, nuclear reactors, thermal storage systems, and heat exchangers. The resolution of the fundamental governing equations was executed employing the Gauss-Seidel approach, with the inclusion of a sub-relaxation process, all within the framework of the finite volume method. The impact of the Rayleigh number, radiation number, volume fraction as well as heat generation/absorption coefficient on thermal transfer, flow, and temperature distributions were investigated. It was observed that for low Rayleigh numbers, radiation influences enhance flow stability and improve the conductive heat transfer mode. Conversely, at high Rayleigh numbers, radiation intensifies convective heat exchange. The growth of the Rayleigh number diminishes the impact of heat generation and reinforces the radiation heat transfer process, while heat absorption exhibits the opposite effect. From Nr = 1 onwards, the average Nusselt number values are no longer influenced by an increase in nanoparticle volumetric fraction, and they are solely linked to the radiation number. [ABSTRACT FROM AUTHOR]

This study focuses on how the porous medium affects the plume generated due to line heat source when an aligned magnetic field is present. For this study, the momentum equation of the flow model is modified for porous medium by including the porosity term. A mathematical model is developed as coupled partial differential equations in order to study the flow problem. Later, a numerical solution is found for the system of coupled partial differential equations that are transmuted in to ordinary differential equations. For this purpose, the numerical characteristics of the problem are derived employing a shooting approach in combination with the built-in MATLAB tool bvp4c. The graphical illustrations of missing and specified boundary conditions demonstrate the impacts of porosity parameter Ω, magnetic force parameter S, Prandtl number Pr and magnetic Prandtl number γ accompanied by a discussion of their corresponding physical implications. The novelty of this developed problem is proclaimed with justification by its emphasis on the principal characteristics of heat and fluid flow affected predominantly by the presence of a porous medium. The thorough examination of the porosity parameter Ω for missing conditions depicts that the temperature and velocity profiles enhance while current density drops for the increasing values of the porosity parameter Ω. Whereas, for specified conditions, the skin friction and magnetic flux enhance but heat transfer rate declines with increment in Ω. [ABSTRACT FROM AUTHOR]

AbstractIn this study, the two-dimensional, steady-state, and incompressible flow and thermal behaviors of a water-based nanoencapsulated phase-change material (NE-PCM) nanofluid within a closed chamber were investigated, considering the impact of buoyancy. A novel approach was introduced by implementing linearly varying temperature conditions along all chamber walls. The effective dynamic viscosity and thermal conductivity correlations, derived experimentally, were used to model the governing equations. These equations were then rendered dimensionless through suitable transformations and solved using the Galerkin finite-element method. Results showed that the phase change region’s width increased with higher Rayleigh numbers, scaled phase change bonds, NE-PCM volume fractions, and fusion temperatures between 0.1 and 0.5, but decreased with fusion temperatures between 0.6 and 0.9. The highest Nusselt number occurred along the bottom wall for a fusion temperature range of 0.4–0.5. For optimal thermal performance, a square chamber with linearly varying temperature walls and a fusion temperature of 0.5 is recommended. [ABSTRACT FROM AUTHOR]

The work numerically investigated laminar natural convection heat transfer from the single sphere with a constant heat flux surface in air over the wide range of Grashof number ( 10 ≤ G r ≤ 10 7 ). The more efficient and precise numerical method based on Bejan et al. was employed here, the accuracy of which has been confirmed through validation against a single sphere case. The heat transfer characteristics were systemically analyzed in terms of isothermal contours and streamlines around the sphere, dimensionless temperature and velocity profiles. Additionally, local Nusselt number as well as local pressure and friction drag coefficients were studied with different Grashof number. In comparison to the sphere with uniform heat flux surface, the heat transfer from the isothermal sphere was found to be enhanced attributable to a more robust buoyancy force and a steeper temperature gradient. Moreover, the average Nusselt number for the sphere with a constant heat flux between 60.4 and 98.6% of the isothermal sphere's value, this range being contingent upon the specific Grashof number. What's more, the proposed correlation addresses a notable void in the predictive understanding of heat transfer from the sphere with uniform heat flux, which is scenario prevalent in various engineering applications, particularly for the cooling of electrical and nuclear systems, and offer values for academic research. [ABSTRACT FROM AUTHOR]

In this paper, the entropy generation of natural convection Jeffrey fluid flow through an inclined porous channel is investigated by taking into account the impact of angled magnetic field, Soret parameter, thermal radiation, and Hall current. On the basis of simplified assumptions, the governing equations are transformed into dimensionless equations by using suitable transformations, and the spectral quasi-linearization method (SQLM) is used for the numerical solution. Graphs are utilized to address the effects of new thermophysical parameters. The calculations reveal that increasing the Soret parameter, inclination angle, Hall parameter, magnetic parameter, and Jeffrey fluid parameter induces an increase in entropy generation. Conversely, it decreases as the radiation parameter and channel angle of inclination increase. [ABSTRACT FROM AUTHOR]