Search

The quality of processed products can be adversely affected by uncontrollable batches of mangoes, which exhibit heterogeneous characteristics. This study aimed to establish predictive models for sugar and organic acid contents (dependent variables) in processed products using the initial compositions of fresh mangoes. Three mango cultivars (cv. 'Kent', cv. 'Keo Romeat', and cv. 'Keo Chen') were classified as low-density and high-density groups. Each group of mangoes at the green-mature, mid-ripe, and ripe stages was processed into pasteurised purees, dried slices, and mango chips. Prediction models were established using a mix of simple linear regression (SLR) based on the initial content and Analysis of Variance (ANOVA) to identify the impact of qualitative variables (ripening stage, cultivar-density, and processing technique). In processed mangoes, 13% sucrose content was estimated to accumulate with the three qualitative variables, whereas glucose and fructose contents decreased from their initial levels by 10% and 7%, respectively. Processing techniques can predict the ratio of sugars/acids (S/A) in processed products, regardless of the ripening stage or cultivar-density. Similar to S/A, citric acid and malic acid contents in mango products were significantly increased by processing techniques. The initial content and processes were insufficient to predict the final contents of the same parameters in processed mangoes; therefore, some models need to include the effects of ripening stage and cultivar-density to improve the prediction. These relevant explanatory variables contributed significantly to the development of the models, resulting the accuracy of predictive models with normalised root mean square errors (NRMSEs) lower than 10%, except for malic acid (14.04%). In conclusion, it is feasible to estimate the sugar and acidity levels in processed mangoes, offering promising possibilities for ensuring consistent quality of mango-based products.

Camel milk occupies a pivotal and essential position in the dietary customs of individuals residing in semi- arid and arid areas. Historically, the promotion and commercial distribution of camel milk have been negligible, primarily due to the absence of processing facilities in areas where camels are raised. Consequently, the consumption of untreated camel milk has been predominantly limited to nomadic households. However, owing to its health- enhancing effects, a substantial surge in the global demand for camel milk and its derivatives has been observed over the past two decades. This growing demand has prompted the dairy sector to introduce a diverse range of camel milk products, which are distinguished by their enhanced nutritional and functional properties. In contrast to products derived from bovine milk, the current market offers only a limited selection of food items sourced from camel milk. Recent advances in food processing technologies have enabled the production of an array of both dairy and non-dairy products derived from camel milk. This includes a variety of items such as powdered milk, cheese, yogurt, ice cream. Moreover, in certain regions, camel milk is incorporated into customary cuisine, serving as a key ingredient in local culinary practices like fermented milk, camel milk tea, or as a fundamental component in various meals. This review underscores the possibility of transforming camel milk into a range of dairy products by addressing its intrinsic functional constraints. This objective can be realised by adjusting the processing parameters and modifying its chemical composition through enrichment techniques. Furthermore, further research avenues may focus on enhancing product quality and exploring innovative processing techniques.

Fine-flavored chocolates are distinguished by their complex and distinct flavor profiles, which includes notes such as floral, fruity, nutty, and spicy. This study sought to modulate the flavor development of chocolates by establishing controlled processing conditions during the transformation from seed to bean in a laboratory setting, to produce superior quality chocolates. Our experimental setup comprised two varying temperature levels (30 °C and 45 °C) and three organic acids (OAs: acetic, lactic, and citric acids) at concentrations of 1–30 g/L to adjust the pH of the transformation system. Our study focused on how these conditions affect the development of distinct flavor profiles in chocolate bars, emphasizing the enhancement of fine-flavor notes. Flavor development was monitored through the untargeted metabolomics of cocoa beans and analyzing the volatile compounds and sensory profiles of the resultant chocolates. This study revealed that OA concentration markedly influenced metabolite formation, particularly affecting peptides, volatile organic compounds, and flavor notes. Chocolates derived from seeds processed with 30 g/L acid solutions demonstrated enhanced fruitiness and acidity, whereas those processed with 1 g/L acid solutions exhibited pronounced nuttiness and cocoa taste attributes but lower acidity. These findings underscore the significance of meticulously managing flavor development processes to produce fine-flavored chocolates with unique aromatic profiles. Crucially, variables in the controlling process, such as temperature and pH, are essential for fine-tuning flavor attributes, enabling the correlation and identification of key quality biomarkers to elucidate flavor development pathways.

Cocoa from Côte d'Ivoire is currently characterized by low technological quality including the absence of desired fine flavors. Various yeasts are essential for cocoa fermentation and play a key role in the formation of cocoa volatile aroma precursors. This study investigated the improvement of aromatic quality of dry fermented cocoa beans through inoculation of yeats reported to be high potential aroma compounds producer to the cocoa fermentation. Starter culture based on Saccharomyces cerevisiae strain TIA2019A from wine fermentation were prepared at 2 concentrations about 0.5 and 1.0 g yeast per kg of fresh cocoa beans. Cocoa 6 days-fermentation with about 25 kg of fresh beans were carried out in plastic boxes (50×30×30 cm3) for 06 days with 2 turnings at 48 and 96 hours. Fermented cocoa beans was then sun-dried until a moisture content about 8%. Volatile organic compounds (VOCs) fingerprint of dry fermented cocoa beans were determined using SPME-GC/MS method. Main results showed that dry fermented cocoa beans fermented from inoculated 0.5 g of S. cerevisiae per kg of fresh cocoa recorded higher contents of relevant VOCs comprised between 100 and 600 µg.g-1 than cocoa beans inoculated at 1.0 g of yeast per kg. Chocolate made from cocoa beans inoculated at 0.5 g of S. cerevisiae per kg of cocoa recorded better score for fresh fruit flavors and global organoleptic quality than those produced from cocoa beans inoculated at 1.0 g of S. cerevisiae per kg of cocoa. Utilization of starter based on S. cerevisiae at low concentration promoted the organoleptic qualities of cocoa and derived chocolate. Selected yeast strains with VOCs producing performance can thus be used to improve aroma quality of dry cocoa beans and the organoleptic quality of chocolate produced thereof.

The market for fine-flavor cocoa provides significant benefits to farmers. However, identifying the sensory qualities of chocolate under specific environmental conditions and measuring how its chemical compounds may be affected by climate differences and postharvesting practices remain a challenge. This study investigates how fermentation time and agroclimatic conditions in Colombia's fine cocoa-producing region of Arauca influence the sensory profile and volatile compound composition (volatilome) of chocolate derived from cocoa beans. Sensory evaluation was conducted on chocolates fermented for 48, 72, 96, and 120 h, revealing that fermentation time critically affects the development of fine-flavor attributes, particularly fruitiness and nuttiness. The optimal fermentation period to enhance these attributes was identified at 96 h, a duration consistently associated with peak fruitiness under all studied climatic conditions. Analysis of 44 volatile compounds identified several key aroma markers, such as acetoin, 1-methoxy-2-propyl acetate, and various pyrazines, which correlate with desirable sensory attributes. These compounds exhibited varying amounts depending on fermentation time and specific agroclimatic conditions, with a 96 h fermentation yielding chocolates with a higher quantity of volatile compounds associated with preferred attributes. Our findings highlight the complex interaction between fermentation processes and agroclimatic factors in determining cocoa quality, providing new insights into optimizing the flavor profiles of chocolate.

Quality attributes play a pivotal role in determining consumers' acceptance and market value of food crops. Dioscorea alata is a major yam species for food security in tropical areas, but our understanding of the genetic factors underlying tuber culinary traits is limited. This study aimed at elucidating the genetic basis of key culinary attributes, including apparent dry matter content (DM), cooking time, boiled yam hardness, and moldability, through genome-wide association studies (GWAS). Phenotypic assessment revealed notable variations among the D. alata genotypes and significant correlations among the quality traits. The GWAS identified 25 significant associations distributed across 14 chromosomes. A total of 12, 1, 6, 6 single nucleotide polymorphisms were detected for cooking time, moldability, hardness and DM. Allele segregation analysis of the identified loci highlighted favorable alleles for short cooking time, good moldability, high hardness and DM content. Within a set of 42 putative candidate genes, we identified genes differentially expressed in tubers of genotypes with contrasting quality attributes. Our study offers valuable insights into the links between these key culinary traits and the underlying genetic basis in D. alata. These findings have practical implications for breeding programs aimed at enhancing the quality attributes of greater yam.

Roots, tubers and bananas (RTBs) contribute immensely to food security and livelihoods in sub-Saharan Africa, Asia and Latin America. The adoption of RTB genotypes in these regions relies on the interplay among agronomic traits, ease of processing and consumer preference. In breeding RTBs, until recently little attention was accorded key textural traits preferred by consumers. Moreover, a lack of standard, discriminant, repeatable protocols that can be used to measure the textural traits deter linkages between breeding better RTB genotypes and end user/consumer preferences. RTB products texture – that is, behaviour of RTB food products under unique deformations, such as disintegration and the flow of a food under force – is a critical component of these preferences. The preferences consumers have for certain product texture can be evaluated from expert sensory panel and consumer surveys, which are useful tools in setting thresholds for textural traits, and inform breeders on what to improve in the quality of RTBs. Textural characterization of RTBs under standard operating procedures (SOPs) is important in ensuring the standardization of texture measurement conditions, predictability of textural quality of RTBs, and ultimately definition of RTB food product profiles. This paper reviews current SOPs for the textural characterization of RTBs, including their various associated methods, parameters, challenges and merits. Case studies of texture characterized during development of SOPs and evaluation of texture of RTB populations are discussed, together with insights into key textural attributes and correlations between instrumental, sensory and consumer assessment of texture unique to various RTB food products. Hardness was considered a universal key textural attribute to discriminate RTBs. The review should provide adequate insight into texture of RTB food products and critical factors in their measurement. It aims to promote inclusion of texture in breeding pipelines

BACKGROUND: The relevance of several characteristics for the acceptability of steamed East Africa bananas (matooke) was assessed using consumer-preferred characteristics, the overall liking scores, check-all-that-apply (CATA) and the Just About Right scale. The study was conducted in rural and urban locations in three banana growing regions of Uganda. Two landraces and two hybrids were processed into matooke. Twelve trained panellists evaluated color, taste and texture sensory characteristics. RESULTS: Consumers scored matooke from landraces as the most liked. The CATA test showed that the most important characteristics were: smooth mouthfeel, soft to the touch, not sticky, moldable, deep yellow color, attractive, good matooke taste and smell. Principal component analysis confirmed that most of the preferred sensory characteristics were associated with the local genotypes, whereas the less preferred characteristics were associated with hybrids. Correlation analysis revealed strong positive correlations between the consumer assessed characteristics, hardness by touch, softness to touch and yellowness, as well as quantitative laboratory characteristics (moldable, hardness by touch, softness and yellowness) of the steamed matooke. Color assessed by consumers was strongly correlated with the laboratory-assessed color indicators. CONCLUSION: The strong associations observed between laboratory-assessed and consumer-based characteristics (moldable by touch and yellowness) suggest the possibility of predicting consumer characteristics using quantitative laboratory sensory assessments. Matooke taste as assessed by consumer panel is strongly associated with smooth texture and deep yellow color, which were the characteristics associated with landraces in the laboratory sensory assessment.

Roots, tubers and cooking bananas are bulky and highly perishable. In Africa, except for yams, their consumption is mainly after transport, peeling and cooking in the form of boiled pieces or dough, a few days after harvest. To stabilize and better preserve the products and, in the case of cassava, release toxic cyanogenic glucosides, a range of intermediate products have been developed, mainly for cassava, related to fermentation and drying after numerous processing operations. This review highlights, for the first time, the impact of genotypes on labour requirements, productivity and the associated drudgery in processing operations primarily carried out by women processors. Peeling, soaking/grinding/fermentation, dewatering, sieving and toasting steps were evaluated on a wide range of new hybrids and traditional landraces. The review highlights case studies of gari production from cassava. The results show that, depending on the genotypes used, women's required labour can be more than doubled and even the sum of the weights transported along the process can be up to four times higher for the same quantity of end product. Productivity and loads carried between each processing operation are highly influenced by root shape, ease of peeling, dry matter content and/or fiber content. Productivity and the often related experienced drudgery are key factors to be considered for a better acceptance of new genotypes by actors in the value-addition chain, leading to enhanced adoption and ultimately to improved livelihoods for women processors. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

BACKGROUND: Determinants of culinary qualities of East African highland cooking bananas (EAHCB) are not well known. This constrains the inclusion of user-preferred traits in breeding. The present study aimed to quantify key indicators of user-preferred characteristics to enable selection of acceptable hybrids. RESULTS: Qualitative characteristics that drive preference were big bunches (15–34 kg), long straight/slightly curved fingers (12–23 cm), yellowness and soft texture. Descriptive sensory analysis of the intensity of colour and texture the 23 genotypes revealed that landraces Kibuzi, Mbwazirume, Nakitembe and Mpologoma had higher intensity of yellowness and lower intensity of hardness (softer) and a low score (≤ 1.0) of astringency taste. A preference test showed that they had higher acceptability scores. Biochemical, instrumental and sensory data revealed correlations between sensory firmness and instrumental hardness (r = 0.5), sensory firmness and amylopectin (r = −0.54), suggesting that qualitative descriptions can be predicted by instrumental and biochemical indicators. Significant (P < 0.05) variations in amylose and total starch content were observed in different varieties. Moderate correlations between instrumental hardness and firmness in mouth (r = 0.55), cohesiveness and firmness in the mouth (r = 0.57), and adhesiveness and firmness in the mouth (r = 0.64) were observed. Surprisingly, carotenoids content was not correlated with yellowness in cooked matooke. However, positive correlations were observed between chroma (b*) parameters of raw matooke and sensorial assessed color on cooked samples. CONCLUSION: Qualitative characteristis; the bunch, pulp colour and texture; that drive users-preference in the EAHCB were quantified, paving way for breeders to use them to select genotypes with these attributes early in the breeding process.

BACKGROUND: Nigeria and Cameroon are multi-ethnic countries with diverse preferences for food characteristics. The present study aimed to inform cassava breeders on consumer-prioritized eba quality traits. Consumer testing was carried out using the triadic comparison of technologies (tricot). Diverse consumers in villages, towns and cities evaluated the overall acceptability of eba made from different cassava genotypes. Data from both countries were combined and linked to laboratory analyses of eba and the gari used to make it. RESULTS: There is a strong preference for eba with higher cohesiveness and eba from gari with higher brightness and especially in Cameroon, with lower redness and yellowness. Relatively higher eba hardness and springiness values are preferred in the Nigerian locations, whereas lower values are preferred in Cameroon. Trends for solubility and swelling power of the gari differ between the two countries. The study also reveals that the older improved cassava genotype TMS30572 is a benchmark genotype with superior eba characteristics across different regions in Nigeria, whereas the recently released variety Game changer performs very well in Cameroon. In both locations, the recently released genotypes Obansanjo-2 and improved variety TM14F1278P0003 have good stability and overall acceptability for eba characteristics. CONCLUSION: The wide acceptance of a single genotype across diverse geographical and cultural conditions in Nigeria, as well as three acceptable new improved varieties in both locations, indicates that consumers' preferences are surprisingly homogeneous for eba. This would enhance breeding efforts to develop varieties with wider acceptability and expand potential target areas for released varieties.

BACKGROUND: Assessment of the key preferred quality traits in pounded yam, a popularly consumed yam food product in West Africa, is often done through sensory evaluation. Such assessment is time-consuming and results may be biased. Therefore, there is a need to develop objective, high-throughput methods to predict the quality of consumer-preferred traits in pounded yam. This study focused on how key quality traits in pounded yam proposed to yam breeders were determined, measured by biophysical and biochemical methods, in order to shorten the breeding selection cycle through adoption of these methods by breeders. RESULTS: Consumer tests and sensory quantitative descriptive analysis (QDA) validated that preferred priority quality traits in pounded yam were related to textural quality (smooth, stretchable, moldable, slightly sticky and moderately hard) and color (white, cream or light yellow). There were significant correlations between sensory textural quality attributes cohesiveness/moldability, hardness, and adhesiveness/stickiness, with textural quality measurements from instrumental texture profile analysis (TPA). Color measurement parameters (L*, a*, and b*) with chromameter agreed with that of sensory evaluation and can replace the sensory panel approach. The smoothness (R2 = 1.00), stickiness (R2 = 1.00), stretchability (R2 = 1.00), hardness (R2 = 0.99), and moldability (R2 = 0.53) of pounded yam samples can be predicted by the starch, amylose, and protein contents of yam tubers estimated by near-infrared spectroscopy. CONCLUSION: TPA and Hunter colorimeter can be used as medium-high throughput methods to evaluate the textural quality and color of pounded yam in place of the sensory panelists.

BACKGROUND: Starch, dry matter content (DMC), proteins and sugars are among the major constituents of yam tuber quality. Genetic improvement programs need simple, rapid and low-cost tools to screen large populations. The objectives of this work were, through a quantitative trait loci mapping approach (QTL) on two diploid full-sib segregating populations: (1) to acquire knowledge on the genetic control of these traits; (2) to identify markers linked to the genomic regions controlling each trait, useful for marker-assisted selection (MAS); (3) to validate the QTLs on a diversity panel; and (4) to identify candidate genes from the validated QTLs. RESULTS: Heritabilities for all traits were moderately high to high. Significant correlations were observed between traits. A total of 25 QTLs were identified, including six for DMC, six for sugars, six for proteins, and seven for starch. The phenotypic variance explained by individual QTLs ranged from 14.3% to 28.6%. Majority of QTLs were validated on diversity panel, showing that they are not specific to the genetic background of the progenitors. The approximate physical location of validated QTLs allowed the identification of candidate genes for all studied traits. Those detected for starch content were mainly enzymes involved in starch and sucrose metabolism, while those detected for sugars were mainly involved in respiration and glycolysis. CONCLUSION: The validated QTLs will be useful for breeding programs using MAS to improve the quality of yam tubers. The putative genes should be useful in providing a better understanding of the physiological and molecular basis of these important tuber quality traits.

BACKGROUND: Gari (especially in Nigeria) is an important West African food product made from cassava. It is an affordable, precooked, dry, easy to prepare and store food product. Eba is a stiff dough produced by reconstituting gari in hot water. Gari and eba quality is an important driver of varietal acceptance by farmers, processors, and consumers. RESULTS : This study characterized the genetic variability, heritability, and correlations among quality-related traits of fresh roots, gari, and eba. Thirty-three diverse genotypes, including landraces and released and advanced breeding genotypes, were used in this study. In total, 40 traits categorized into fresh root quality, colour, functional, and texture properties trait groups were assessed. We observed broad phenotypic variability among the genotypes used in this study. Dry matter content had a positive (P < 0.05) correlation with gari%, bulk density and a negative correlation with eba hardness and gumminess. Broad-sense heritability across all environments varied considerably among the different trait groups: 62% to 79% for fresh root quality, 0% to 96% for colour, 0% to 79% for functional and 0% to 57% for texture properties. CONCLUSIONS: The stable broad-sense heritability found for gari%, gari and eba colour, bulk density, swelling index, and hardness measured using instrumental texture profile analysis coupled with sufficient variability in the population indicate good potential for genetic improvement of these traits through recurrent selection. Also, it is possible to genetically improve gari%, bulk density, and swelling power by simultaneously improving the dry matter content of fresh roots.

BACKGROUND: Consumer preferences for boiled or fried pieces of roots, tubers and bananas (RTBs) are mainly related to their texture. Different raw and cooked RTBs were physiochemically characterized to determine the effect of biochemical components on their cooking properties. RESULTS: Firmness in boiled sweetpotato increases with sugar and amylose contents but no significant correlation was observed between other physicochemical characteristics and cooking behaviour. Hardness of boiled yam can be predicted by dry matter (DM) and galacturonic acid (GalA) levels. For cassava, no significant correlation was found between textural properties of boiled roots and DM, but amylose and Ca2+ content were correlated with firmness, negatively and positively, respectively. Water absorption of cassava root pieces boiled in calcium chloride solutions was much lower, providing indirect evidence that pectins are involved in determining cooking quality. A highly positive correlation between textural attributes and DM was observed for fried plantain, but no significant correlation was found with GalA, although frying slightly reduced GalA. CONCLUSION: The effect of main components on texture after cooking differs for the various RTBs. The effect of global DM and major components (i.e. starch, amylose) is prominent for yam, plantain and sweetpotato. Pectins also play an important role on the texture of boiled yam and play a prominent role for cassava through interaction with Ca2+.

BACKGROUND: Potato varieties have diverse biophysical characteristics, so it is important for breeders to have the capacity to choose those that meet the preferences of end users, such as mealiness, firmness, and taste, among others. Combining user preferences with descriptive information regarding the sensory characteristics of boiled potatoes can contribute to the improvement of consumer-driven varieties. This study aimed to factor in the preferences of end users to improve the prospects for varietal acceptance, adoption, and discrimination among genotypes in potato breeding. RESULTS: The priority quality traits (traits that play the most significant roles in acceptance and adoption) of the boiled potatoes were determined by evaluating gender and livelihood using the G+ tool. The G+ tool is designed to assess gender impact on roots, tubers and bananas (RTB) traits by serving as a validation check to reflect on important gender-based issues in agricultural food systems in order to reduce harm and promote positive impact. Potato genotypes were differentiated by penetration (textural parameters as measured by standard texture probe) and the procedure was repeatable, as there was no significant difference between the cooking replicates at 40 min of cooking. Instrument-based texture parameters, such as penetration peak force (hardness/firmness) and area (area under the curve, which represents energy needed to penetrate) of boiled potato tubers were significantly associated with sensory attributes such as fracturability and hardness in the mouth. An attempt to differentiate genotypes using near-infrared spectroscopy (NIRS) revealed that the average results observed for the calibration for yellow color (r2 = 0.70), homogeneity of color (r2 = 0.48), moisture in mass (r2 = 0.40), and uniformity of texture (r2 = 0.56) suggested that these parameters could be used for initial breeding screening purposes. CONCLUSIONS: The preferred traits of the boiled potato can be integrate

BACKGROUND: Previously, a lexicon and protocol for quantitative descriptive analysis (QDA) was established for the Uganda sweetpotato breeding program. The implication of QDA scores for priority sensory attributes on consumer preference should be determined to interpret results efficiently and make decisions effectively. The present study aimed to develop a gender-responsive decision tree to obtain an overall sweetpotato eating quality score to facilitate demand-led targeted breeding selection. It focused on Kamuli and Hoima districts (Uganda) and uses pre-lease advanced clones ('NKB3', 'NKB105', 'NKB135', 'D11' and 'D20'), released varieties ('NASPOT 8' and 'NAROSPOT 1') and landraces ('Muwulu-Aduduma', 'Umbrella'). RESULTS: Including boiled sweetpotato sensory characteristics, namely mealy, sweet taste, sweetpotato smell, firm and not fibrous, in breeding design would benefit end-users, especially women given their role in varietal selection, food preparation and marketing. 'D20', 'NASPOT 8' and 'NAROSPOT 1' were most liked in both districts. 'NKB3' and 'D11' were the least liked in Hoima, whereas 'Muwulu-Aduduma' was the least liked in Kamuli. There was a positive correlation between color and overall liking (r2 = 0.8) and consumers liked the color (average rating ≥ 6 on a nine-point hedonic scale) of all genotypes. Threshold values (average rating on 11-point scales) for consumer acceptability were identified (sweet taste = 6, sweetpotato aroma and flavor = 6, firmness = 3, and mealiness = 4). A regression decision tree tool was created to calculate an eating quality selection index when screening lines in breeding programs using the values. CONCLUSION: Decision trees that include consumer needs and gender considerations would facilitate demand-led breeding and make varietal selection in sweetpotato breeding programs more effective.

BACKGROUND: Inadequate consideration of textural quality in conventional breeding pipelines of plantains (from breeders to end-users) results in limited impact. Knowledge of the textural quality characteristics of boiled plantain, as preferred by end-users, could help improve the adoption of new clones when these traits are selected for breeding. The present study aimed to evaluate the relationship between instrumental and sensory texture attributes of boiled plantain genotypes. Consumer testing (Just About Right and Check All That Apply tests), sensory quantitative descriptive analysis (QDA), instrumental texture profile analysis (TPA) and penetrometry were conducted with nine accessions: three landraces and six plantain-like bred hybrids. RESULTS: Landraces were considered just-about-right by more than 45% of people for all the sensory attributes (humidity, sweetness, color and firmness), described by characteristics such as smooth on sight, attractive, mealy, firm, plantain taste and yellow. Color and firmness were the most highly scored attributes by panelists for the landraces. Penetrometry discriminated among genotypes better than TPA. Hardness, gumminess, resilience and chewiness were the most discriminatory attributes for TPA, whereas hardness and area under the curve were the most discriminatory attributes for penetrometry. No correlation was found between penetrometry and sensory texture of boiled plantain. For TPA, negative correlations were found between sensory humidity and hardness, as well as between sensory firmness and resilience, whereas a positive correlation was found between resilience and sensory humidity. CONCLUSION: Combining QDA and texture measurements can make the selection of plantain hybrids more effective and improve the adoption of new varieties.

The 5-year project 'Breeding roots, tubers and banana products for end user preferences' (RTBfoods) focused on collecting consumers' preferences on 12 food products to guide breeding programmes. It involved multidisciplinary teams from Africa, Latin America, and Europe. Diverse data types were generated on preferred qualities of users (farmers, family and entrepreneurial processors, traders or retailers, and consumers). Country-based target product profiles were produced with a comprehensive market analysis, disaggregating gender's role and preferences, providing prioritised lists of traits for the development of new plant varieties. We describe the approach taken to create, in the roots, tubers, and banana breeding databases, a centralised and meaningful open access to sensory information on food products and genotypes. Biochemical, instrumental textural, and sensory analysis data are then directly connected to the specific plant record while user survey data, bearing personal information, were analysed, anonymised, and uploaded in a repository. Names and descriptions of food quality traits were added into the Crop Ontology for labelling data in the databases, along with the various methods of measurement used by the project. The development and application of standard operating procedures, data templates, and adapted trait ontologies improved the data quality and its format, enabling the linking of these to the plant material studied when uploaded in the breeding databases or in repositories. Some modifications to the database model were necessary to accommodate the food sensory traits and sensory panel trials.

Background: Most rheological analyses in yam have been done on starch gels, which requires starch extraction from the tubers. In situ rheology bypasses the need of starch extraction and relies on the original cell structure and complex matrix organization under stress or strain. Dynamic rheological properties of tuber from 16 accessions belonging to four yam species (Dioscorea rotundata, D. alata. D. bulbifera and D. dumetorum) were investigated for potential use as a medium throughput phenotyping screening tool that can indicate the quality of yam food products or their industrial potentials. Results: Rheographs of the tubers illustrated differences in the structure of D. bulbifera compared to other yam species. High initial storage modulus (G′) of yam parenchyma indicated tubers with strong and rigid structure which do not lose their structural integrity easily on heating. Dioscorea rotundata and D. alata varieties exhibited a lower temperature at which gelatinization took place (Tgel) equivalent to the irreversible transition during starch gelatinization (75.3 and 79.8 °C) and took shorter time (867 and 958 s, respectively) to reach the G′ maximum, compared to other species. The stress relaxation test showed that the higher the dry matter of the tubers, the higher the work to rupture the structure. Conclusion: Rheological characteristics G′, loss modulus (G″), swelling capacity and Tgel showed potential as suitable quality indicators for yam products. In situ rheological characterization of yam tubers could be used as an instrumental screening tool to phenotype for quality in yam products. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Background: Consumers' preferences for food crops are guided by quality attributes. This study aimed at deciphering the genetic basis of quality traits, especially tuber flesh color (FC) and oxidative browning (OB) in Dioscorea alata, based on the genome-wide association studies (GWAS) approach. The D. alata panel was planted at two locations in Guadeloupe. At harvest, the FC was scored visually as white, cream, or purple on longitudinally sliced mature tubers. The OB was scored visually as the presence or absence of browning after 15 minutes of exposure of the sliced samples to ambient air. Results: Phenotypic characterization for FC and OB of a diverse panel of D. alata genotypes highlighted significant variation within the panel and across two locations. The genotypes within the panel displayed a weak structure and could be classified into 3 subpopulations. GWAS identified 14 and 4 significant associations for tuber FC and OB, respectively, with phenotypic variance, explained values ranging from 7.18 to 18.04%. Allele segregation analysis at the significantly associated loci highlighted the favorable alleles for the desired traits, i.e., white FC and no OB. A total of 24 putative candidate genes were identified around the significant signals. A comparative analysis with previously reported quantitative trait loci indicated that numerous genomic regions control these traits in D. alata. Conclusion: Our study provides important insights into the genetic control of tuber FC and OB in D. alata. The major and stable loci can be further utilized to improve selection in breeding programs for developing new cultivars with enhanced tuber quality.

BACKGROUND: Boiled yam key quality attributes typical for West African consumers are: crumbly, easy to break, and sweet taste. New yam varieties are being developed but high or medium throughput tools to assess the required quality traits and their range of acceptance are limited. This study assessed the acceptance thresholds of these quality attributes and established the predictive models for screening yam varieties that meet the required consumers' preferences. RESULTS: Overall liking was associated with sweet taste, crumbly and easy to break (r values 0.502, 0.291 and -0.087, respectively). These parameters and selected biophysical parameters highly discriminated the boiled yam varieties. Crumbly texture and easy to break were well-predicted by penetration force and dry matter, whereas sweet taste by dry matter and sugar intensity. A high crumbliness and sweet taste are preferred (sensory scores above 6.19 and 6.22 for crumbly and sweet taste, respectively, on a 10 cm unstructured line scale), while a too high easiness to break is disliked (sensory scores ranging from 4.72 to 7.62). Desirable biophysical targets were between 5.1 and 7.1 N for penetration force, dry matter around 39% and sugar intensity below 3.62 g/100g. Some improved varieties fulfilled the acceptable thresholds, and the screening was improved through the deviation from optimum. CONCLUSION: The acceptance thresholds and the deviation from optimum for boiled yam assessed through the instrumental measurements are promising tools for yam breeders.

Background: Gari and eba, forms of cassava semolina, are mainly consumed in Nigeria and other West African countries. This study aimed to define the critical quality traits of gari and eba, to measure their heritability, to define medium and high throughput instrumental methods for use by breeders, and to link the traits with consumer preferences. The definition of a food product's profiles, including its biophysical, sensory, and textural qualities, and the identification of the characteristics that determine its acceptability, are important if new genotypes are to be adopted successfully. Results: Eighty cassava genotypes and varieties (three different sets) from the International Institute of Tropical Agriculture (IITA) research farm were used for the study. Participatory processing and consumer testing data on different types of gari and eba products were integrated to prioritize the traits preferred by processors and consumers. The color, sensory, and instrumental textural properties of these products were determined using standard analytical methods, and standard operating protocols (SOPs) developed by the RTBfoods project (Breeding Roots, Tubers, and Banana Products for End-user Preferences, https://rtbfoods.cirad.fr). There were significant (P < 0.05) correlations between instrumental hardness and sensory hardness and between adhesiveness and sensory moldability. Principal component analysis showed broad discrimination amongst the cassava genotypes and the association of the genotypes concerning the color and textural properties. Conclusions: The color properties of gari and eba, together with instrumental measures of hardness and cohesiveness, are important quantitative discriminants of cassava genotypes.

Background: In recent years, it has become increasingly evident that banana projects in Uganda needed to incorporate consumer preferences into the breeding pipelines to increase the acceptability of new cultivars. A trained panel used quantitative descriptive analysis (QDA) as a tool to assess the sensory characteristics of thirty-two cooking bananas (Matooke). The aim was to investigate which characteristics best-described matooke for consumer acceptability. Results: Fourteen descriptors were generated. The preferred attributes of matooke were high intensity of yellow colour, homogeneous distribution of yellow colour, good matooke aroma, highly moldable by touch, moist and smooth in the mouth. ANOVA revealed significant differences in the yellowness, homogeneity of the colour, firmness, moistness, smoothness, matooke aroma, hardness, and moldability across the genotypes (p<0.05). PCA showed strong positive correlations between yellowness and homogeneity of the colour (R=0.92). Smoothness in the mouth and moldability by touch were strongly and positively correlated (R=0.88). Firmness in the mouth was well predicted by hardness by touch (R2=0.85). The matooke samples were ranked into two sensory clusters by agglomerative hierarchical clustering (AHC). Conclusion: The study showed attribute terms that could be used to describe matooke, and also revealed that QDA may be used as a tool during the assessment and selection of new cooking banana hybrids to identify relevant sensory attributes because of its ability to discriminate among the banana hybrids.

BACKGROUND: Cassava retting ability and the textural qualities of cooked fufu are important quality traits. Cassava retting is a complex process in which soaking causes tissue breakdown, starch release, and softening. The rate at which various traits linked to it evolve varies greatly during fufu processing. According to the literature, there is no standard approach for determining retting ability. The retting indices and textural properties of fufu were measured using both manual and instrumental approaches. RESULTS: Different protocols were developed to classify 64 and 11 cassava genotypes into various groups based on retting ability and textural qualities, respectively. The retting protocols revealed considerable genetic dissimilarities in genotype classification: foaming ability and water clarity should be measured at 24 h, while penetrometer, hardness, turbidity, pH, and total titratable acidity data are best collected after 36 h. The stepwise regression model revealed that pH, foaming ability, and dry matter content are the best multivariates (with the highest R2) for predicting cassava retting. These predictors were used to develop an index for assessing the retting ability of cassava genotypes. The retting index developed showed a significant relationship with dry matter content and fufu yield. The study also showed significant correlations between instrumental cohesiveness and sensory smoothness (r = −0.75), moldability (r = −0.62), and stretchability (r = 0.78). Instrumental cohesiveness can correctly estimate fufu smoothness (R2 = 0.56, P = 0.008) and stretchability (R2 = 0.60, P = 0.005). CONCLUSION: pH, foaming ability, and dry matter content are the best traits for predicting cassava retting ability, while instrumental cohesiveness can effectively estimate fufu smoothness and stretchability.

Crop breeding in sub-Saharan Africa has made considerable gains; however, postharvest and food-related preferences have been overlooked, in addition to how these preferences vary by gender, social difference and context. This context is changing as participatory approaches using intersectional gender and place-based methods are beginning to inform how breeding programmes make decisions. This article presents an innovative methodology to inclusively and democratically prioritise food quality traits of root, tuber and banana crops based on engagement with food systems actors and transdisciplinary collaboration. The outcome of the methodology is the Gendered Food Product Profile (GFPP) – a list of prioritised food quality characteristics – to support breeders to make more socially inclusive decisions on the methods for trait characterisation to select genotypes closer to the needs of food system actors. This article reviews application of the methodology in 14 GFPPs, presents illustrative case studies and lessons learned. Key lessons are that the transdisciplinary structure and the key role of social scientists helped avoid reductionism, supported co-learning, and the creation of GFPPs that represented the diverse interests of food system actors, particularly women, in situ. The method partially addressed power dynamics in multidisciplinary decision making; however, effectiveness was dependent on equitable team relations and supportive institutions committed to valuing plural forms of knowledge. Actions to address power asymmetries that privilege particular types of knowledge and voices in decision making are crucial in techno-science projects, along with opportunities for co-learning and long-term collaboration and a transdisciplinary structure at higher level.

BACKGROUND: Cassava processing is a crucial source of livelihood for rural farmers and processors in Nigeria and Cameroon. This study investigated the varietal effect on the processing productivity of women farmer processors within their working environment and compared this with the food product quality as evaluated by the processors and the field yield. Field trials were established in Nigeria (Benue and Osun state) and Cameroon (Littoral region). Eight cassava genotypes were evaluated. These eight varieties included newly bred genotypes, commercial checks and varieties provided and preferred by the processors. The roots of these genotypes were harvested and processed into gari and eba by processors. The time of each processing step was recorded. Processors assessed the quality of the roots and food products using pairwise ranking. RESULTS: In the field trials in Cameroon and Nigeria (Benue state), the newly bred genotypes showed superior performance in terms of dry matter content and fresh and dry yield. During processing, genotypes showed significant variation for most assessed parameters in both countries. Some newly bred varieties exhibited lower productivity that can make them more prone to drudgery than the local commercial checks and the varieties provided and preferred by the processors. Newly bred varieties were mostly ranked higher or equal to processors' preferred varieties concerning fresh root and food product quality. In the Cameroon location there were significant varietal differences in processing productivity and drudgery index which suggest that the particular processing methods there - such as pressing methods and fermentation time - cause these varietal differences to matter more. CONCLUSIONS: The varieties that were tested were observed to differ in yield, product quality, processing productivity, and potential drudgery levels. Some breeders' germplasms displayed a combination of increased yields and good product quality and good processor pro

The proliferation of quality labels for the same food product questions the relevance of labeling schemes. Based on the theory of legitimacy and research on food-related consumer behavior, this study aims to examine the influence of the perceived legitimacy of a label (PDO) on consumers' perceptions of the quality and purchase intentions of the labeled product. A conceptual model was, therefore, developed to estimate the influence of four dimensions of legitimacy on the perceived quality and purchase intention of PDO-labeled cheese, French cheeses being products whose quality is traditionally linked to their regional origin. Our model was tested on a sample of 600 consumers representative of the French population. Using Partial Least Square Structural Equation Modeling, results show that for surveyed consumers, the pragmatic, regulative, and moral legitimacy of the PDO label positively influences the perceived quality of PDO-labeled cheese. Furthermore, pragmatic legitimacy has a substantial and direct influence on purchase intention, whereas both regulative and moral legitimacy influence purchase intention only indirectly through perceived quality. Unexpectedly, our findings do not show a significant influence of cognitive legitimacy either on perceived quality or purchase intention. The output of this research contributes to a better understanding of the link between a label's legitimacy, perceived quality, and purchase intention.

Livestock plays a significant role in food production, income generation, soil quality, transportation and the overall welfare of communities, especially in developing nations. Sheep and goats are vital sources of food, livelihood and urgent financial needs. Researching livestock practices can help optimize production, enhance productivity, and improve market access, ultimately boosting the economic well-being of developing communities. Research is needed to identify climate-resilient livestock practices, develop drought-resistant breeds, and optimize feed management strategies. By enhancing the resilience of livestock systems, research can help safeguard food security and livelihoods in the face of climate change. Climate change, evidenced by temperature changes and increased extreme weather events, negatively impacts traditional farming systems and livestock production by affecting pastures, feeds, water quality and livestock diseases. Breeds of the Coastal Zone of Western Desert (CZWD) such as the Barki sheep and goat as well as the Saidi breed in Upper Egypt (UE), have adapted to these harsh conditions and are crucial for smallholders. However, there's an information gap regarding these breeds' productivity in smallholder systems. This study utilizes the Twelve Month Monitoring (12MO) survey to estimate the productivity and demographic parameters of these breeds from 2018 to 2020.

Background and objectives: In Senegal, increased prevalence of overweight/obesity and diet-related non-communicable diseases is of paramount concern, urging the transformation of food systems to deliver more nutritious and safe foods. Community involvement is recognised as an important factor in the success and sustainability of efforts to promote healthy eating and prevent overweight/obesity. Therefore, this study aimed to assess communities' readiness to address the issue of poor food safety and nutritional quality of foods available in their food environments (i.e., places where consumers acquire or consume foods) in urban Senegal. Methods: The Community Readiness Model (CRM), consisting of 36 open questions that revolves around five dimensions of readiness (community knowledge of efforts, leadership, community climate, knowledge of the issue and resources) was used. Community leaders and actors who play a key role within the food environment were individually interviewed in two neighbourhoods of Guediawaye (n=9) and Dakar (n=10). Interviews were scored with a maximum of 9 points per dimension (1= no awareness, 9= high level of community ownership) and thematic analysis was conducted on key informants' recommendations to ensure nutritious and safe food systems. Results: Both communities reached the stage of 'vague awareness' of the issue, with a mean score of 3.00 ± 1.94 in Guediawaye and 3.11 ± 1.58 in Dakar. Both communities scored highest for 'knowledge of the issue' (6.00 ± 2.44 in Guediawaye; 5.69 ± 2.08 in Dakar), while the lowest scores were found for 'community knowledge of efforts' (1.46 ± 0.81 in Guediawaye; 1.86 ± 2.30 in Dakar). Leaders' concern and prioritisation of this issue was perceived as inexistent in both neighbourhoods, contrasting with high levels of community concern. Proposed solutions included: raising community awareness, improving sanitation infrastructure locally and nationally, and increasing government involvement. Conclusions: While

While the nutritional quality and environmental impact of diets are widely assessed, different production modes (organic vs. conventional) remain understudied as for sustainability. The present study examines the associations between different dimensions of sustainability of food purchases and sociodemographic factors. Households (n = 462) were included in this cross-sectional study using quota sampling in Montpellier Metropolitan Area. Food items acquired over one month were registered in a food supply diary, and the expenditure share of each food group (including organic food) was estimated. Validated indexes estimated scores reflecting the nutritional quality and the environmental impact of food purchases according to these expenditure shares. Associations were tested for each sustainability dimension using linear and multinomial logistic regression models adjusted for sociodemographic factors (e.g. age, education, living area). The age of the household's reference person was consistently related to the sustainability dimensions of food purchases, albeit in different ways. While older age was associated with better nutritional quality (estimate for age >50 years vs. age between 30-50 [95%CI]=0.91[0.29;1.54]), it was associated with a higher environmental impact (estimate for age >50 years vs. age between 30-50 [95%CI]=1.84[0.95;2.73]). Households with a highly educated reference person (OR master's degree vs. lower education levels [95%CI]=1.59 [1.02;2.47] had a larger share of organic foods and those living around the city of Montpellier (OR vs. living in the city centre [95%CI]=0.44[0.24;0.81]) had a smaller share. Our findings highlight that sociodemographic factors relate to sustainability dimensions in different ways. In addition, we address organic food purchases, which provide insights into different aspects of sustainability. Taken together, the findings suggest that there are various levers for promoting healthy and sustainable diets at the consumer leve

Aims: Mold contamination of foods especially by mycotoxin producing fungi is not only a global food quality concern for food manufacturers, but it also constitutes a high risk for human and animal health resulting in massive economic losses globally. This study investigated the effect of Lactic Acid Bacteria (LAB) on the growth of Aspergillus carbonarius strains and their production of ochratoxin A (OTA). Methodology: Seven fresh coffee cherry and 9 dry coffee cherry samples were collected from Man, Daloa and Akoupé 3 main coffee producing regions in Côte d'Ivoire. LAB were isolated from fresh coffee cherries while mold strains were from both fresh and dry coffee cherry. The inhibitory effect against mold growth and the ability for OTA removal of selected LAB strains were tested successively in vitro and then during coffee cherry primary postharvest processing before evaluating their influence on sensory quality of beverage. OTA production ability of molds strains are studied using both solid (CYA) and liquid (CYB) Cazapeck Yeast medium. Results: About 34 fungal isolates belonging to Aspergillus and Penicillium genus were studied for their OTA production using the agar plug technique and HPLC-FD. Five A. carbonarius strains were capable of OTA production between 15.9 and 83mg.kg-1.Out of seven isolates of Lactobacillus plantarum, two were successful in inhibition of mycelial growthproduced fungicidal activity; five were successful in retarding it produced fungistatical activity All of L. plantarum isolates exhibited OTA reduction ability at about 99 %. The inoculation of two highest anti-ochratoxigenic LAB to fermenting coffee cherries resulted in great inhibition of mold growth and OTA contents reduction varying from 63.2 to 82.2%. The addition of LAB to coffee cherries did not influence the sensory attributes of the beverages produced thereof. Conclusion: This study highlighted that LAB are very promising biological candidates for reduction of mold contamination a

The freezing point degree of milk (FPD) is a classical indicator of cow milk quality. In camel milk, few references are available in the literature regarding the main factors of variation. In the present paper, two methods of FPD determination were used: the Reference method (RM) (using Cryostar) and the Express method (EM), using a milk analyzer (Milkoscan-FT1). The RM was used to determine FPD in 680 bulk raw or pasteurized camel milk samples. Regarding EM, 736 individual milk samples, 1323 bulk samples, 635 samples of pasteurized milk and 812 samples of raw milk used for cheese making were available. The variability of FPD was investigated according to month, lactation stage, milk composition, milk production and microbiological status. Correlations between methods were explored. FPD was highly correlated with most of the milk components and tended to decrease in cases of high contamination by coliforms or high total flora count. However, the weak significant correlations between the two methods indicated the necessity to specifically calibrate an automatic milk analyzer for camel milk.

With an output of 250,000T, Cameroun is the fifth cocoa producer in the African continent. The provision of support services for cocoa sectors experienced a transformation at the beginning of the 90's. In fact, with liberalization, the cocoa sector suffered from the effects of the disengagement of the State when it came to production and post-harvest support, and in the regulation of the cocoa market and prices. A decline in cocoa quality and production volumes has resulted from this situation. In this paper, we focus on the emergence of innovation support services dedicated to supporting the improvement of cocoa quality and sustainability. We conclude by identifying the main challenges and opportunities for the development of these new services, with a holistic and systemic approach that includes social, technical and organizational dimensions.

BACKGROUND: Of the 130 known coffee (Coffea) species, very few have been properly evaluated for their beverage quality. The diversity of wild coffee species is considered critical to the long-term sustainability of the coffee sector, particularly under climate change. The challenge is finding coffee crops that satisfy agronomic criteria, now and under the altered climatic conditions of the future, as well as consumer requirements for flavour. We evaluated the sensory characteristics of three wild coffee species with four independent sensory panels, and the key environmental/agronomic requirements of these wild species based on a literature review. RESULTS: Coffea congensis and C. stenophylla have a lower unroasted seed weight compared to C. arabica and C. canephora, while C. brevipes has the largest. Sensory analysis showed that the main differences between species was for the fruitiness attribute. Coffea stenophylla was the fruitiest wild species, and was considered an Arabica-like coffee. The flavour profile range of C. stenophylla covers herb-like, vegetal, floral and fruit; C. brevipes resembles C. stenophylla in some respects. Opinions concerning C. congensis were contradictory and several judges considered the industry-standard coffee flavour wheel not suitable for the beverage produced from this species. CONCLUSION: The three wild species have the required sensory qualities for commercialization. According to published data, C. stenophylla has agronomic potential, especially in warmer climates than Arabica areas. Coffea brevipes and C. congensis have the potential to be easily crossed with C. canephora to form interspecific hybrids capable of adapting to different climatic and agronomic conditions.

Context: Consumption of food away from home represents an increasing share of people's food consumption worldwide, although the percentage of food intake that is consumed away from home varies among countries and among individuals. Previous systematic reviews have reported that, overall, consumption away from home negatively affects an individual's diet and nutritional status. However, these reviews have mainly focused on high-income countries, leaving a gap in knowledge and data for people in low- and middle-income countries (LMICs). Objective: The present review aimed to describe trends in the consumption of food away from home in an apparently healthy population in low- and middle-income countries (LMICs) and to investigate any associations between this behavior and diet quality, nutritional status, and health outcomes. Data Sources: A structured search strategy was developed for retrieving (from MEDLINE [via PubMed], Web of Science, and Scopus) peer-reviewed articles published in English from March 2011 until May 2021. Data Extraction: Forty studies were included, and from them information was obtained based on data from 12 different countries. A qualitative and descriptive approach was used to review the evidence. Data Analysis :: It was found that there was large heterogeneity in the definition of food consumed away from home and the methods used to measure it, making comparisons and syntheses difficult. Consumption of food away from home in LMICs was relatively common and was positively driven by factors such as being a male, being young, having a high socio-economic status, being educated, and living in urban areas. As in high-income countries, consumption of food away from home in LMICs had unfavorable effects on an individual's diet quality, nutritional status, and health. Conclusion: There is a need to develop harmonized surveillance systems for better monitoring of the phenomenon of food consumption away from home in LMICs, including a need for a standar

Cassava is one of the most common food crops grown and consumed in many parts of Africa, and boiled cassava is especially popular in West Africa. However, its quality characteristics and attributes are not well documented. This study aimed at generating data to produce useful information on cassava trait preferences for boiling. To understand end-users' trait-preferences for raw and boiled cassava, the study used a mix of approaches including a qualitative survey, process diagnosis and consumer testing. Gender-disaggregated data on cassava varieties were clustered into three categories: “common varieties with similar rank”, “common varieties but differently ranked” and “varieties exclusively cited by women or men”. Raw cassava root for making high-quality boiled cassava should have cracked peel, a sweet taste, and white flesh. Irrespective of cassava varieties, the three descriptors: “hard to break in the hand”, “not crumbly in the mouth” and “too bitter tasting” greatly penalized the overall liking, lowering values by a range of 2.2 to 2.6 on a nine-point scale (i.e. by about a quarter). Accordingly, high-quality boiled cassava should be attractive with white, homogenous flesh, a sweet taste, easy to break in the hand, crumbly in the mouth, and fiber-free.