Search

Locally sourced agricultural residues are a promising feedstock for the production of reinforcement fibers for wastepaper-based packaging papers. An eco-friendly high yield process to generate fibers from wheat straw using high pressure steam and sodium carbonate is presented. The wheat straw was impregnated with up to 16% of sodium carbonate and steam treated for 10 min at temperatures from 148 °C to 203 °C. The pulps were characterized concerning their chemical composition and test sheets with 100% straw fibers and with 15% and 30% straw fibers blended with recycled pulp were prepared. Fiber yields ranged from 70% to 45%, wherein more severe treatment conditions contributed to increased paper strength but lower yields. At comparable fiber yields, treatments featuring a higher chemical input, coupled with lower treatment temperatures, resulted in improved paper strength. By blending recycled pulp with up to 30% of straw fibers with a beating degree of roughly 45 °SR, the burst, compression and tensile strength was enhanced by up to 66%, 74% and 59%, respectively. As the enhancement effect decreases with a high steam treatment intensity and a high proportion of wheat straw, a moderate treatment and limited use of wheat straw may be the best choice.

Locally sourced agricultural residues are a promising feedstock for the production of reinforcement fibers for wastepaper-based packaging papers. An eco-friendly high yield process to generate fibers from wheat straw using high pressure steam and sodium carbonate is presented. The wheat straw was impregnated with up to 16% of sodium carbonate and steam treated for 10 min at temperatures from 148 °C to 203 °C. The pulps were characterized concerning their chemical composition and test sheets with 100% straw fibers and with 15% and 30% straw fibers blended with recycled pulp were prepared. Fiber yields ranged from 70% to 45%, wherein more severe treatment conditions contributed to increased paper strength but lower yields. At comparable fiber yields, treatments featuring a higher chemical input, coupled with lower treatment temperatures, resulted in improved paper strength. By blending recycled pulp with up to 30% of straw fibers with a beating degree of roughly 45 °SR, the burst, compression and tensile strength was enhanced by up to 66%, 74% and 59%, respectively. As the enhancement effect decreases with a high steam treatment intensity and a high proportion of wheat straw, a moderate treatment and limited use of wheat straw may be the best choice. [ABSTRACT FROM AUTHOR]

The use of non-wood fibres for paper production could be one of the most environmentally friendly and economical alternatives. Reducing the consumption of wood pulp in paper and cardboard production by replacing wood pulp with alternative plant biomass could be a viable solution, as the amount of non-wood fibres in biomass is far from being exhausted. In this study, straw from the most commonly grown agricultural crops in Croatia was used as a source of non-wood fibres. Agricultural residues from wheat, barley and triticale were selected as a substitute for wood fibres for the production of laboratory papers with straw fibres. Under laboratory conditions, straw pulp was mixed with recycled wood pulp in a ratio of 30:70 to produce paper sheets that can be printed with different printing techniques. Regardless of the printing technique used, it is desirable that the prints contain a high-quality reproduction of the image and text on the surface of the paper and that the ink does not penetrate completely through the substrate. In this context, this study observed the use of laboratory-made papers with non-wood fibres as the printing substrate by analysing the maximum depth of ink penetration into the printing substrate obtained with two printing techniques - a modern one (digital UV inkjet) and a very high quality conventional one (gravure). It was found that the gravure printing favoured a greater penetration of the UV ink into the substrate with the addition of straw pulp compared to the digital printing technique. However, this is a consequence of the printing technique, as similar ink penetration was also observed on the laboratory substrate made only from recycled fibres. Compared to commercial papers, the ink penetration is slightly higher into the laboratory made printing substrates. It is interesting to note that the printing substrate with the addition of 30% triticale pulp has the lowest ink penetration, especially in multicolour prints produced with the digital UV inkjet printing technique.

The use of non-wood fibres for paper production could be one of the most environmentally friendly and economical alternatives. Reducing the consumption of wood pulp in paper and cardboard production by replacing wood pulp with alternative plant biomass could be a viable solution, as the amount of non-wood fibres in biomass is far from being exhausted. In this study, straw from the most commonly grown agricultural crops in Croatia was used as a source of non-wood fibres. Agricultural residues from wheat, barley and triticale were selected as a substitute for wood fibres for the production of laboratory papers with straw fibres. Under laboratory conditions, straw pulp was mixed with recycled wood pulp in a ratio of 30:70 to produce paper sheets that can be printed with different printing techniques. Regardless of the printing technique used, it is desirable that the prints contain a high-quality reproduction of the image and text on the surface of the paper and that the ink does not penetrate completely through the substrate. In this context, this study observed the use of laboratory-made papers with non-wood fibres as the printing substrate by analysing the maximum depth of ink penetration into the printing substrate obtained with two printing techniques - a modern one (digital UV inkjet) and a very high quality conventional one (gravure). It was found that the gravure printing favoured a greater penetration of the UV ink into the substrate with the addition of straw pulp compared to the digital printing technique. However, this is a consequence of the printing technique, as similar ink penetration was also observed on the laboratory substrate made only from recycled fibres. Compared to commercial papers, the ink penetration is slightly higher into the laboratory made printing substrates. It is interesting to note that the printing substrate with the addition of 30% triticale pulp has the lowest ink penetration, especially in multicolour prints produced with the digital UV inkjet printing technique. [ABSTRACT FROM AUTHOR]

Surface characteristics of printing substrates are of the utmost importance to all types of paper that interact with ink. During all types of printing processes, the behaviour of the liquid phase (ink or dye) on the paper is directly defined by the paper cellulose-based surface. The printed ink spreads and penetrates more into paper fibres when the paper surface is rougher and more permeable. Contact angle measurements by sessile drop method are considered the most appropriate for determining the paper sheet surface energy. Paper as hydrophilic material has a high absorption rate resulting in a low contact angle. The objective of this study was to evaluate the surface free energy of laboratory-made papers containing straw pulp obtained from residues after the harvest of the most cultivated cereals in Croatia (wheat, barley and triticale). The obtained surface free energy results are promising for straw pulp usage in the manufacture of printing paper.

Today, the paper industry is faced with a global deficiency of raw wood materials, so alternative sources of virgin cellulose fibres are playing an important role in paper production. Agricultural countries produce large quantities of crop farming by-products such as straw, which is an interesting alternative raw material for cellulose fibres. Straw is used in many industries because of its numerous advantages: animal food industry, biofuel industry, construction industry and as artistic material. The potential use of straw production residues is of great importance in paper and printing industry. The focus of this research is on triticale straw, which was used as a non-wood fibre source for paper production. Namely, triticale straw was converted into semi-chemical pulp and was combined with recycled wood pulp in order to produce alternative laboratory papers. The usability of this kind of laboratory papers in printing industry was analysed based on line reproduction quality. This research evaluated and analysed line reproduction quality based on four line attributes: width, blurriness and raggedness. The results of this research proved that triticale pulp in laboratory papers has equal influence on line printing quality as the recycled wood pulp. [ABSTRACT FROM AUTHOR]

Paper performance qualities strongly depend on the origin of cellulose fibers. Awareness of environmental issues and sustainable development has led to the increase in the use of recycled printing papers. Recovered fibers are often used as a substitute for virgin wood fibers in the production of certain types of papers. As recovered fibers cannot provide the same quality level of paper products as virgin wood fibers, alternative sources of virgin cellulose fibers need to be identified. The aim of this research was to analyze the printability of laboratory papers made of different contents of straw pulp. Therefore, the printing papers were formed using straw pulp of three different cereal species (wheat, barley, and triticale) and mixing them with recycled newsprint in different weight ratios. The printability of these laboratory papers was analyzed by classifying dot reproduction quality based on four dot reproduction attributes. Printed dot reproduction greatly affects the quality of reproduction in graphic products, as dots are the most important element in multi-color reproduction of texts and images. It was confirmed that laboratory papers containing straw pulp provide the same or even better dot reproduction quality than laboratory control papers formed only of recycled newsprint.

The modified bleaching sequence OPAPPO from short-sequence bleaching OAP and OQP was studied in an effort to achieve higher quality straw pulp (with brightness 84.5% and acceptable viscosity 669 mL/g), which will be appropriate for more situations than straw pulp as presently produced. Though the OP and PO stages are recognized as the key processes used to increase the pulp’s brightness, addition of hydrogen peroxide in acid pretreatment with polyoxometalate (POM) as catalyst (AP stage) was mainly considered in this work. Phosphomolybdic acid was applied to improve straw pulp’s brightness, which was 4.8% ISO higher than the pulp treated without POM. The optimum conditions of the AP stage were: initial pH value 3, temperature 90 °C, H2O2 1.5%, and phosphomolybdic acid 1.0%. Comparison of the sequences OPQPO, OPAPO, and OPAPPO showed that the brightness of pulp bleached by OPAPPO was 2% and 4.7% higher than the same pulp subjected to OPAPO and OPQPO sequences, respectively. Four lignin samples (LOP, LOPA, LOPAP, LOPAPPO) were characterized by 31P NMR spectroscopy. The spectroscopic investigation showed that in LOPA and LOPAP, aliphatic hydroxyls, p-coumaryl units, and guaiacyl phenol moieties were degraded when compared with that in LOP. In LOPAPPO, all these aliphatic hydroxyls and guaiacyl phenols had been destroyed and carboxylic acid functionalities increased.

Paper performance qualities strongly depend on the origin of cellulose fibers. Awareness of environmental issues and sustainable development has led to the increase in the use of recycled printing papers. Recovered fibers are often used as a substitute for virgin wood fibers in the production of certain types of papers. As recovered fibers cannot provide the same quality level of paper products as virgin wood fibers, alternative sources of virgin cellulose fibers need to be identified. The aim of this research was to analyze the printability of laboratory papers made of different contents of straw pulp. Therefore, the printing papers were formed using straw pulp of three different cereal species (wheat, barley, and triticale) and mixing them with recycled newsprint in different weight ratios. The printability of these laboratory papers was analyzed by classifying dot reproduction quality based on four dot reproduction attributes. Printed dot reproduction greatly affects the quality of reproduction in graphic products, as dots are the most important element in multi-color reproduction of texts and images. It was confirmed that laboratory papers containing straw pulp provide the same or even better dot reproduction quality than laboratory control papers formed only of recycled newsprint. [ABSTRACT FROM AUTHOR]

The reaction kinetics of ozone bleaching of wheat straw pulp has been studied for the first time. The results were compared with eucalyptus pulp in order to know that both raw materials have a similar behaviour. Ozone treatments were carried out in a special reactor at low consistency (0.5% o.d.p.). The main variables were consumption of ozone by the pulp and application of a xylanase treatment (X) prior to the oxygen stage (O). The responses measured were kappa number, viscosity and brightness, to give the kinetic expressions for delignification, cellulose degradation and elimination of chromophore groups, along with calculation of selectivity. Cellulose degradation and elimination of lignin and chromophore groups show first-order kinetics in all cases. The kinetics of the enzyme pre-treatment effect shows similar behaviour in both raw materials, although the constants of delignification and elimination of chromophore are higher in straw pulp. [Copyright &y& Elsevier]

The XOAZRP TCF sequence was applied to bleach wheat straw pulp. Following each bleaching stage, the properties of the pulp (viz. kappa number, standard viscosity, borohydride viscosity and brightness) and of the resulting effluents were determined. The performance of the reagents was analyzed through the studies of xylanase treatment and crystallinity and scanning electron microscopy of the pulps. Finally, the pulp was refined at 1000 revolutions in a PFI mill and the mechanical properties of the resulting paper were determined and compared with those of paper from a eucalyptus pulp. Despite its shortcomings, wheat straw pulp can be effectively bleached with the proposed TCF sequence. [Copyright &y& Elsevier]