Search

ABSTRACT Objectives Methods Results Conclusions Currently, there are various surgical options for the treatment of lateral ankle sprains, and deciding which surgical option to use is a question worth considering. Furthermore, there is a relative scarcity of mechanical research comparing suture anchor repair (SAR) and suture tape augmentation (STA) internal brace for the repair of the anterior talofibular ligament (ATFL). Therefore, this study aimed to compare the efficacy of arthroscopically all‐inside ATFL SAR and STA for reconstruction to treat lateral ankle sprains through biomechanical testing.Eighteen fresh‐frozen cadaver ankles were used for the study and divided into one of three groups: (1) intact ATFL group, (2) arthroscopically reconstructed with suture tape augmentation internal brace of the ATFL (STA group), and (3) arthroscopically repaired ATFL with suture anchors (SAR group). We used custom fixtures to test the specimens for loading to ultimate failure and stiffness.The mean load to failure of the STA group (311.20 ± 52.56 N) was significantly higher than that of the intact ATFL group (157.37 ± 63.87 N; p = 0.0016) and the SAR group (165.27 ± 66.81 N; p = 0.0025). The mean stiffness of the STA group (30.10 ± 5.10 N/mm) was significantly higher than that of the intact ATFL (14.17 ± 6.35 N/mm; p = 0.0012) and the SAR group (15.15 ± 6.89 N/mm; p = 0.0021). The suture anchor repair withstood failure loads and stiffness similar to the intact ATFL.In terms of failure load and stiffness, the reconstructive outcome of ATFL reconstruction with STA is markedly superior to that of SAR reconstruction of the ATFL and the intact ATFL. Additionally, the novel technique of the SAR was a reliable technique that offered biomechanical properties similar to intact ATFL. [ABSTRACT FROM AUTHOR]

Objective: The objective of this study is to assess and compare the clinical efficacy of “Figure-8” banding and double-row anchor suture-bridge fixation techniques in the arthroscopic management of tibial intercondylar eminence avulsion fractures. Method: A retrospective analysis was conducted on the medical records of 42 patients who underwent arthroscopic surgery for tibial intercondylar eminence fractures at our institution from June 2017 to June 2022. This cohort included 20 cases treated with “Figure-8” banding and 22 cases managed using double-row anchor suture-bridge fixation. Comparative assessments were made regarding operative duration, duration of fracture consolidation, postoperative knee joint range of motion, joint stability as assessed by the Lachman test, Lysholm score, and International Knee Documentation Committee (IKDC) functional score for both treatment groups. Results: The mean follow-up duration was 13.8 months. The analysis indicated that the double-row anchor suture-bridge group had a significantly longer operative duration compared to the “Figure-8” banding group (p < 0.05). Postoperative computed tomography (CT) scans confirmed successful reduction in both groups, with fracture consolidation achieved within an average of three months. Both groups showed significant improvements in postoperative knee range of motion, joint stability, and functional scores compared to preoperative measurements (p < 0.05). During the initial two-month post-surgery, the double-row anchor suture-bridge group demonstrated superior knee joint range of motion and functional scores compared to the “Figure-8” banding group (p < 0.05); however, these differences were not statistically significant beyond three months post-surgery (p > 0.05). By the one-year postoperative mark, joint stability outcomes were comparable between the two treatment groups (p > 0.05). Conclusion: Both “Figure-8” banding and double-row anchor suture-bridge fixation techniques in the arthroscopic management of tibial intercondylar eminence avulsion fractures can achieve precise reduction and stable fixation. In addition, the figure-8 suture group has the characteristics of shorter surgery time and less cost. Notably, early postoperative knee function appears to be superior with double-row anchor suture-bridge fixation compared to “Figure-8” banding. [ABSTRACT FROM AUTHOR]

Background: Two types of suture anchor insertion pathways (anterolateral portal vs lateral accessory portal) are used in arthroscopic anterior talofibular ligament (ATFL) repair. However, it is not clear which one is the better choice. This study aims to compare the clinical outcomes of these 2 suture anchor insertion pathways when performing arthroscopic ATFL lasso-loop repair for the treatment of chronic lateral ankle instability (CLAI). Methods: From 2019 to 2021, patients with CLAI who underwent arthroscopic ATFL lasso-loop repair were retrospectively reviewed and divided into the anterolateral portal (ALP) group and the lateral accessory portal (LAP) group. A 1:1 propensity score matching was used to control confounding factors based on age, sex, body mass index, follow-up duration, preoperative visual analog scale (VAS) score, and Tegner score (ALP group, n = 26; LAP group, n = 26). Karlsson score, VAS score, Tegner score, operation time, anterior drawer test results, patient symptoms, and magnetic resonance (MR) evaluation of ATFL quality were used to describe the outcomes. Results: The patient characteristics and follow-up durations were similar between the 2 groups. After a mean follow-up duration of 28.8 ± 2.3 months, the ALP group had significantly better Karlsson score, VAS score, and Tegner score improvement than the LAP group, with fewer symptoms. Seven patients in the LAP group still had a feeling of ankle instability, and 3 of them exhibited ankle laxity. Conclusion: In this study, we found that inserting the suture anchor through the anterolateral portal was associated with better outcomes compared to that through the lateral accessory portal when performing arthroscopic ATFL lasso-loop repair for CLAI patients. The improvement was greater for pain relief and function and was associated with a lower frequency of subjective ankle instability. [ABSTRACT FROM AUTHOR]

Background: Posterior medial meniscus root (PMMR) tears (PMMRTs) can be repaired using various techniques to promote healing. However, the biomechanical properties of suture-relay all-suture anchor (ASA) versus conventional suture anchor (CSA) and loop-locking transtibial pullout (TTP) have not been well established. Purpose: To compare the biomechanical properties of PMMR repairs using suture-relay ASA, CSA, and loop-locking TTP. Study Design: Controlled laboratory study. Methods: A total of 33 fresh-frozen porcine knee joints with intact medial menisci were randomly divided into 3 groups, with 11 specimens in each group: ASA, CSA, and TTP. The study involved cyclic loading, with displacement measurements taken after 100, 500, and 1000 cycles. Subsequently, the specimens were loaded until clinical failure (defined as 3-mm displacement) and then to ultimate failure of the construct, with data recorded for displacement after cyclic loading, load to 3-mm displacement, and ultimate load to failure. Results: After 1000 cyclic loadings, the suture-relay ASA group showed considerably less displacement than the loop-locking TTP group (1.8 ± 0.7 mm vs 2.9 ± 0.3 mm; P <.001), but the displacements did not differ considerably between the suture-relay ASA and CSA groups (2.2 ± 0.9 mm; P >.05). The mean loads to clinical failure were significantly greater in the suture-relay ASA and CSA groups (61.3 ± 6.5 and 57.5 ± 9.7 N, respectively) than in the loop-locking TTP group (38.3 ± 9.4 N; P <.05). The ultimate load to failure was significantly greater in the suture-relay ASA group than in the loop-locking TTP group (153 ± 55.1 N vs 102 ± 12.9 N; P <.05). All specimens in the loop-locking TTP group failed by suture elongation mode, whereas only 2 specimens (18%) in the suture-relay ASA group and 5 specimens (45%) in the CSA group failed by suture elongation. Nine specimens (82%) in the suture-relay ASA group and 6 specimens (55%) in the CSA group failed due to suture cutout through the meniscal tissue. Conclusion: The biomechanical properties after PMMR repair did not statistically differ between the suture-relay ASA and CSA groups. The suture-relay ASA technique had a higher load to failure than the loop-locking TTP technique. Clinical Relevance: The suture-relay ASA technique is a promising option for the repair of PMMRTs; its repairing strength is also comparable to that of the CSA technique. Notably, the suture-relay ASA technique can be utilized without establishing a posteromedial portal, resulting in decreased procedure time and mitigating challenges associated with working from the posterior aspect of the knee. [ABSTRACT FROM AUTHOR]

Background: Distal triceps tendon ruptures are an uncommon injury with several reported repair techniques. Outcomes research between the repair techniques is complicated by the rarity of the injury as most published materials are based on small sample sizes and specific surgical techniques. This study compared surgical complications, reoperations, and range of motion between all suture transosseous tunnel only (TT), suture anchor only (SA), and transosseous tunnel plus suture anchor (TTSA) repair techniques. Methods: We retrospectively identified patients who underwent a distal triceps repair at our tertiary-care institution from 2011 to 2021. The electronic medical record was reviewed for patient demographics, triceps rupture characteristics, repair technique, and postoperative complications. Results: This study includes 199 patients who underwent a repair by TT (82), SA (69), or TTSA (48) techniques. No differences were identified between groups with regards to demographics and medical comorbidities. Patients treated by SA technique were more likely to have a loss of elbow extension (SA: 14 [26.4%], TT: 6 [8.57%], TTSA: 4 [10.0%], P = .014) postoperatively with an average loss of 9° for the patients in all groups. However, no differences were identified between the groups with regards to postoperative complications (TT: 15.9%, SA: 17.4%, TTSA: 18.8%, P = .911), including triceps rerupture (TT: 6.10%, SA: 4.35%, TTSA: 12.5%, P = .260), and reoperation (TT: 11.0%, SA: 11.6%, TTSA: 14.6%, P = .822) rates. Conclusion: Regardless of repair technique, distal triceps tendon repair surgery has a relatively high complication and reoperation rate. However, given the similarities between the various methods of repair, surgeons can be confident in repairing this type of injury by whichever modality they deem appropriate.

Abstract Objective The objective of this study is to assess and compare the clinical efficacy of “Figure-8” banding and double-row anchor suture-bridge fixation techniques in the arthroscopic management of tibial intercondylar eminence avulsion fractures. Method A retrospective analysis was conducted on the medical records of 42 patients who underwent arthroscopic surgery for tibial intercondylar eminence fractures at our institution from June 2017 to June 2022. This cohort included 20 cases treated with “Figure-8” banding and 22 cases managed using double-row anchor suture-bridge fixation. Comparative assessments were made regarding operative duration, duration of fracture consolidation, postoperative knee joint range of motion, joint stability as assessed by the Lachman test, Lysholm score, and International Knee Documentation Committee (IKDC) functional score for both treatment groups. Results The mean follow-up duration was 13.8 months. The analysis indicated that the double-row anchor suture-bridge group had a significantly longer operative duration compared to the “Figure-8” banding group (p 0.05). By the one-year postoperative mark, joint stability outcomes were comparable between the two treatment groups (p > 0.05). Conclusion Both “Figure-8” banding and double-row anchor suture-bridge fixation techniques in the arthroscopic management of tibial intercondylar eminence avulsion fractures can achieve precise reduction and stable fixation. In addition, the figure-8 suture group has the characteristics of shorter surgery time and less cost. Notably, early postoperative knee function appears to be superior with double-row anchor suture-bridge fixation compared to “Figure-8” banding.

Abstract Background The inclusion of a connecting path in a porous implant can promote nutrient diffusion to cells and enhance bone ingrowth. Consequently, this study aimed to evaluate the biomechanical, radiographic, and histopathological performance of a novel 3D-printed porous suture anchor in a rabbit femur model. Methods Three test groups were formed based on the type of suture anchor (SA): Commercial SA (CSA, Group A, n = 20), custom solid SA (CSSA, Group B, n = 20), and custom porous SA (CPSA, Group C, n = 20). The SAs were implanted in the lateral femoral condyle of the right leg in each rabbit. The rabbits (New Zealand white rabbits, male, mean body weight of 2.8 ± 0.5 kg, age 8 months) underwent identical treatment and were randomized into experimental and control groups via computer-generated randomization. Five rabbits (10 femoral condyles) were euthanized at 0, 4, 8, and 12 weeks post-implantation for micro-CT, histological analysis, and biomechanical testing. Results At 12 weeks, the CPSA showed a higher BV/TV (median 0.7301, IQR 0.7276–0.7315) than the CSSA and CSA. The histological analysis showed mineralized osteocytes near the SA. At 4 weeks, new bone was observed around the CPSA and had penetrated its porous structure. By 12 weeks, there was no significant difference in ultimate failure load between the CSA and CPSA. Conclusions We demonstrated that the innovative 3D-printed porous suture anchor exhibited comparable pullout strength to conventional threaded suture anchors at the 12-week postoperative time-point period. Furthermore, our porous anchor design enhanced new bone formation and facilitated bone growth into the implant structure, resulting in improved biomechanical stability.

Background: The ligamentous and osseous structures of the elbow joint are the major contributors to its inherent stability and damage to any of these structures can result in elbow instability. The aim of this study is to present objective and subjective outcomes following ligament repairs and/or reconstructions for acute elbow instability and chronic elbow instability. Methods: This study included patients who underwent an elbow ligament repair and/or reconstruction for acute or chronic elbow instability. We performed a comprehensive retrospective data analysis of the patient's files, followed by a clinical examination and X-ray of these patients. Results: We identified 12 acute stabilizations and 22 stabilizations for chronic instability. Patients who underwent stabilization for chronic instability had statistically significant improvements in their preoperative flexion and extension; 14.8 ± 6.4° and 5.9 ± 2.5°. Patients with chronic instability achieved better extension-flexion and pronation-supination arcs compared with their acute instability counterparts and this reached statistical significance. When the elbow pain and function scores were compared, we found stabilizations in the acute setting had better outcomes. There were two cases of postoperative instability, one in the acute instability group and one in the chronic instability group. Conclusion: This study provides evidence for elbow ligament repairs and reconstructions in both acute and chronic settings. It is an effective way of stabilizing the elbow joint in chronic instability patients, and results in an improvement in their overall range of motion. These patients achieved a greater range of motions compared with their acute instability counterparts.

A 65-year-old woman presented with right elbow pain after a fall. Imaging showed an avulsion fracture of the olecranon. The patient subsequently underwent surgery using the suture bridge technique with anchors. However, loosening was observed intraoperatively. Therefore, a McLaughlin cerclage with an artificial ligament was added, resulting in a rigid fixation. Bone union was achieved at 4 months postoperatively. At 18 months postoperatively, no limitation was observed in the range of motion of the elbow joint; the disabilities of the arm, shoulder and hand score was 0. McLaughlin cerclage with an artificial ligament provided additional fixation, demonstrating greater strength compared with suture anchors and minimizing the risk of cut-through in the osteoporotic bone. This approach offers a promising alternative for such cases by combining firm fixation with a reduced risk of complications, particularly in older patients with osteoporosis. [ABSTRACT FROM AUTHOR]

Background: Anterior cruciate ligament (ACL) reconstruction is the current gold standard for treating ACL injuries. However, primary ACL repair has recently regained attention as a potential alternative in carefully selected patients. Purpose: To evaluate the clinical, functional, and radiological outcomes of primary ACL repair in patients with proximal ACL tears and good tissue quality. Methods: Sixteen patients with proximal ACL tears (Sherman's type 1 and 2) and good tissue quality underwent arthroscopic primary ACL repair. Patients were divided into two groups based on follow-up duration: Group A (>12 months; n=4) and Group B (<12 months; n=12). Clinical stability tests, Lysholm scores, and postoperative MRI findings were assessed. Results: The overall mean Lysholm score was 86.6, with 75% of patients achieving good to excellent scores. Negative Lachman's test was observed in 93.75% of patients (Group A: 75%, Group B: 100%; p=0.250), and negative pivot shift test in 87.5% (Group A: 75%, Group B: 91.7%; p=0.450). Postoperative MRI showed normal-appearing ACLs in 81.25% of patients (Group A: 100%, Group B: 75%; p=0.529). Conclusion: Primary ACL repair demonstrated favorable early outcomes in patients with proximal tears and good tissue quality, with clinically stable knees, good to excellent functional scores, and normal-appearing repaired ACLs on MRI. Further research with larger cohorts and longer follow-up is needed to assess the long-term effectiveness of this technique. [ABSTRACT FROM AUTHOR]

Purpose: The most effective approach to treat individuals with rotator cuff tears (RCTs) remains uncertain, but operative treatment, especially arthroscopic surgery with various suture anchors, is becoming more popular. The purpose of this study was to assess the functional outcomes in patients who underwent arthroscopic RCTs restoration using Sironix suture anchors. Materials and Methods: Eighty patients (36 males and 44 females) who had arthroscopic rotator cuff restoration using Sironix suture anchors were included. Postoperatively, patients were followed up and functional outcomes were evaluated using the American Shoulder and Elbow Surgeons Standardization Shoulder Assessment (ASES), level of activity using the Simple Shoulder Test (SST) questionnaire, Quality of life using the Shoulder Pain and Disability Index (SPADI) scale, and Single Assessment Numerical Evaluation (SANE) score on a scale of 0–100. Adverse events were recorded post-RCTs restoration. Results: The functional outcomes were presented as the mean (standard deviation [SD]) values of total ASES, SPADI, and SST scores, which were observed to be 92.6 (05.28), 01.6 (02.46), and 90.3 (14.22), respectively. The SANE mean (SD) values of the operated shoulder and the opposite shoulder were 91.8 (10.22) and 97.3 (5.68), respectively, with a P = 0.0001. No serious adverse events were reported and none of the subjects discontinued the study. Conclusions: The current study demonstrated that the functional outcomes were quite satisfactory, with good results. Therefore, Sironix shoulder implants (CEPTRE® Knotted UHMWPE Suture PEEK Anchor and CEPTRE® Knotted UHMWPE Suture Titanium Anchor) were considered safe and effective in rotator cuff restoration.

Objectives: Acute rupture of achilles tendon is a commonly occurring injury affecting mostly the young individuals involved in sports activities. Operative management is most often employed to treat such injuries. This study was aimed to evaluate the functional outcome in patients with acute tendo achilles tear managed by open repair using a suture anchor. Methods: This was a prospective study conducted between September 2018 to August 2020 on patients who underwent suture anchor repair for acute tendo achilles tear. All patients were followed up for at least 9 months. The patients were clinically evaluated and AOFAS score was used to assess their functional outcome. Results: In a total of 38 patients, 28 (73.7%) patients showed Excellent and 7 (18.4%) patients had Good results whereas 1 (2.6%) had Fair and 2 (5.3%) patients demonstrated Poor surgical result at the final follow-up. 89.5% patients did not have any complication. The average AOFAS score was 90.97 ± 10.24. Conclusion: Operative treatment with suture anchor in acute tendo achilles tear has a high success rate, quick recovery after surgery, lower rate of complications, faster return to daily activities, excellent aesthetic and comparable functional results and is also a safe, simple and accepted surgical technique.

Objectives: Acute rupture of achilles tendon is a commonly occurring injury affecting mostly the young individuals involved in sports activities. Operative management is most often employed to treat such injuries. This study was aimed to evaluate the functional outcome in patients with acute tendo achilles tear managed by open repair using a suture anchor. Methods: This was a prospective study conducted between September 2018 to August 2020 on patients who underwent suture anchor repair for acute tendo achilles tear. All patients were followed up for at least 9 months. The patients were clinically evaluated and AOFAS score was used to assess their functional outcome. Results: In a total of 38 patients, 28 (73.7%) patients showed Excellent and 7 (18.4%) patients had Good results whereas 1 (2.6%) had Fair and 2 (5.3%) patients demonstrated Poor surgical result at the final follow-up. 89.5% patients did not have any complication. The average AOFAS score was 90.97 ± 10.24. Conclusion: Operative treatment with suture anchor in acute tendo achilles tear has a high success rate, quick recovery after surgery, lower rate of complications, faster return to daily activities, excellent aesthetic and comparable functional results and is also a safe, simple and accepted surgical technique. [ABSTRACT FROM AUTHOR]

Background: There is no current consensus on which of the two most common flexor digitorum profundus (FDP) avulsion repair constructs, via suture button pullout (SBP) or suture anchor (SA), is biomechanically superior. Our purpose was to compare these repair methods via systematic review and meta-analysis of available literature. Methods: We performed a Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA)-guided systematic review of PubMed, the Cochrane library, and Embase. We only included studies with direct comparison data for both techniques. We performed a meta-analysis comparing the reported biomechanical results using pooled data for initial repair stiffness (N/mm), gap formation (mm), and ultimate load to failure (N). Results: Seven studies met inclusion criteria, including a total of 201 cadaveric specimens. Four studies reported initial construct stiffness, with pooled analysis showing superiority for SA repairs (P <.05). Four studies evaluated gap formation, with pooled analysis demonstrating less gapping with SA repair (P <.05). Mean gap formation was 2.4 (±1.4) mm and 3.9 (±2.0) mm for the SA and SBP groups, respectively. All 7 studies assessed load to failure, with pooled analysis revealing no significant difference between groups (P >.05). We lacked statistical power to determine equivalence between techniques for load to failure. Both groups had failure values significantly lower than the native FDP. Conclusions: Via meta-analysis, there was increased initial construct stiffness and less gap formation for SA compared to SBP for FDP reinsertion, with no significant differences for ultimate failure load. [ABSTRACT FROM AUTHOR]

Posterior heel pain secondary to insertional Achilles tendinopathy is a common condition that often times requires surgical management. Typically, this involves reflecting a portion of the Achilles tendon from its insertion to adequately debride devitalized or thickened tendon as well as any osseous prominence and then reattached into the calcaneus via suture anchors. Oftentimes, it is suggested that patients with an increased body mass index (BMI) have a higher risk of complications. However, there is no published evidence to support this claim. The present study is a retrospective review of 78 patients who underwent detachment/reattachment of the Achilles tendon for chronic insertional Achilles tendinopathy. Patients were separated into three groups based on BMI: normal, obese, and morbidly obese. The mean BMI of all patients included was 35.6 kg/m2 (range: 21.8-54.9, SD: 6.9). We compared complication rates between the groups and found no significant difference (p =.541). Patients in all groups also demonstrated statistically significant improvements in both American Orthopedic Foot and Ankle Society (AOFAS) hindfoot-ankle scores (Normal BMI: p =.002; Obese: p = <.001; Morbidly obese: p = <.001) and Patient-Recorded Outcomes Measurement Information System (PROMIS) scores (Normal BMI: p =.003; Obese: p = <.001; Morbidly obese: p =.001). In conclusion, the results of our study demonstrate that detachment/reattachment of the Achilles insertion in the management of insertional Achilles tendinopathy in obese and morbidly obese patients may be safe and effective without the risk of increased complications. [ABSTRACT FROM AUTHOR]

The number of elderly patients with rotator cuff tears requiring surgical consideration is increasing. Achieving stable fixation between the bone-suture anchor is a critical biomechanical factor for successful arthroscopic rotator cuff repair outcomes. On the other hand, suture anchor pull-out during arthroscopic rotator cuff repair has been reported in up to approximately 5.4% of cases, particularly in cases involving osteoporosis. Various studies have been conducted to overcome the pull-out issue. This article comprehensively reviews the current technical considerations for obtaining stable fixation between bone and suture anchors and considerable surgical techniques for pull-out or loosening suture anchors during arthroscopic rotator cuff repair in patients with osteoporosis. This literature review is expected to assist in achieving consistently stable surgical outcomes, even in osteoporotic patients. [ABSTRACT FROM AUTHOR]

BackgroundTo evaluate the clinical efficacy of arthroscopic autologous iliac bone grafting with suture anchor binding fixation combined with a Bankart repair for recurrent anterior shoulder dislocation with a significant anterior glenoid defect.MethodsPatients with recurrent anterior shoulder dislocation with an anterior glenoid defect area greater than 20% admitted to our department from March 2019 to March 2022 were prospectively enrolled. Arthroscopic autologous iliac bone grafting with suture anchor binding fixation combined with a Bankart repair was performed. Computed tomography (CT) images were captured preoperatively, immediately after surgery, and at 3, 6, and 12 months postoperatively to evaluate the glenoid defect area, graft area, and graft healing. Shoulder function was assessed using the Instability Severity Index, Oxford Shoulder Instability, and Rowe scores recorded preoperatively and at the final follow-up. The shoulder range of motion, shoulder stability test, surgery-related complications, subluxation/dislocation, and revision surgery were also evaluated.ResultsA total of 32 patients were included in the study, with an average follow-up time of 18.3 ± 6.3 months, when the graft healing rate was shown to be 100%. The area ratio of the graft to the glenoid was 37.6% ± 10.5% (range, 23.5%–44.1%) determined by an enface-view three-dimensional CT performed immediately after surgery, and 29.2 ± 8.2% (range, 19.6%–38.7%) at 12 months postoperatively. At the final follow-up, the glenoid defect had improved from 28.7 ± 6.4% (range, 20.5%–40.6%) before surgery to −10.2 ± 4.7% (range, −13.8% to 6.1%). The preoperative Rowe and Oxford scores were 56.4 ± 8.5 and 34.7 ± 7.1 respectively, which improved to 94.3 ± 6.7 and 15.3 ± 3.2 at the final follow-up (p

Introduction: Both knotted all suture anchors and metal anchors are used for arthroscopic Bankart repair. We retrospectively evaluated and compared clinical and functional outcomes after arthroscopic Bankart repair using the knotted all-suture anchors and knotted metal anchors. Materials and methods: In a retrospective cohort analysis, patients who underwent arthroscopic Bankart repair without any concomitant additional lesion repair using either all-suture anchors or metal anchors, between January 2015 and May 2018 were identified. Their pre- and post-operative functional and clinical outcomes were compared using Rowe and WOSI scores. The recurrence rate in the two groups was also compared. Results: A total of 41 patients in all suture anchors group and 47 in the metal anchors group were identified as per inclusion and exclusion criteria. The demographic profile of both groups was comparable. There was no significant difference in clinical and functional outcome between the two suture anchor groups as per Rowe (pre-operative 40.13+6.51 vs 38.09+6.24 and post-operative 2 years 93.28+7.09 vs 92.55+9.2) and WOSI (pre-operative 943.05+216.64 vs 977.55+165.46 and post-operative 2 years 278.21+227.56 vs 270.94+186.25) scores. There was a significant improvement in both the groups between pre-operative and post-operative ROWE and WOSI scores at 6 months and 2 years follow-up as compared to pre-operative scores (p

Abstract Background Shoulder disorders, particularly rotator cuff tears, are prevalent musculoskeletal conditions related to aging. Although the widely used suture anchor technique provides strong mechanical support to the tendon, it is associated with a risk of postoperative tendon retearing. The conventionally used titanium alloys can affect the interpretation of magnetic resonance imaging. Degradable magnesium alloys possess excellent biocompatibility, similar mechanical property to the bone, and stimulating bone formation ability from Mg2+. The purpose of this experiment was to develop innovative magnesium-based suture anchors to enhance rotator cuff repair by improving fixation materials, and to evaluate their feasibility in a goat model. Methods We developed fluoridized ZK60 suture anchors as the implantation material for two goats, who underwent rotator cuff repair surgery on both shoulders. Computed tomography (CT) and histological analysis were performed at 12 weeks postoperatively, and the results were compared between the magnesium and titanium alloy groups. Additionally, a hematological examination was conducted, which included assessments of red blood cells, white blood cells, platelets, coagulation function, liver function, kidney function, and magnesium ion concentration. Results The 12-week postoperative CT images showed intact MgF2 ZK60 suture anchors, effectively reconnecting the infraspinatus tendon to the humeral head. The anchors became less visible on CT scans, indicating absorption by surrounding tissues. New bone formation in the MgF2 group surpassed that in the Ti group, demonstrating superior osseointegration. The similarity between cortical bone and magnesium reduced stress-shielding and promoted bone regeneration. Histological analysis revealed successful tendon healing with MgF2 anchors, while the Ti group showed discontinuous interfaces and reduced collagen secretion. Hematological examination showed stable liver, renal function, and magnesium ion levels. Conclusions The findings indicate that MgF2-coated suture anchors are feasible for rotator cuff repair and potentially other orthopedic applications. We hope that magnesium alloy anchors can become the solution for rotator cuff tendon repair surgery.

Abstract Background Currently, there were two major surgical methods for arthroscopic triangular fibrocartilage complex (TFCC) foveal repair: suture anchor (SA) and transosseous suture (TOS). The purpose of this systematic review is to examine the relevant outcome improvement and safety of SA and TOS technique. Methods Literature review of electronic databases for studies investigating the effects of SA and TOS in patients undergoing arthroscopic TFCC foveal repair was performed. We compared the pre-operative and postoperative functional outcomes, clinical outcomes [pain, range of motion (ROM) and grip strength], and complications of two methods. Minimal clinically important difference (MCID) was used to determine clinically meaningful improvement. Results There were 1263 distinct studies identified, with 26 (904 patients) meeting the inclusion criteria. The mean age of participants ranged from 21.4 to 41 years, and the mean follow-up time ranged from 6 to 106 months. Both SA and TOS groups reported significant improvement in the modified mayo wrist score, the disabilities of the arm, shoulder, and hand (DASH) score, quick DASH score, patient-reported wrist evaluation (PRWE) score, and the visual analog scale (VAS) score. According to MCID, all the studies from both groups reporting DASH, quick DASH, PRWE and VAS score achieved clinically meaningful improvement. (MCID: 10 for DASH, 14 for quick DASH, 14 for PRWE and 1.6–18 for VAS). The ROM changes in both groups varied from improvement to deterioration. Grip strength improved in both SA and TOS group. Most complications were self-limited. The reoperation rates in SA and TOS ranged from 0 to 20% and 0 to 27.3%, respectively. Conclusions Both SA and TOS technique for arthroscopic TFCC foveal repair could achieve improvement in postoperative functional outcomes, pain, and grip strength with low reoperation rate. However, the ROM improvement was still inconclusive. Level of evidence IV Systematic review of level III and IV studies.

Background: Displaced olecranon fractures constitute a challenging problem for elbow surgeons. The purpose of this study is to evaluate the role of suture anchor fixation for treating patients with displaced olecranon fractures. Methods: A retrospective review was performed for all consecutive patients with displaced olecranon fractures treated with suture anchor fixation with at least 2 years of clinical follow-up. Surgical repair was performed acutely in all cases with nonmetallic suture anchors in a double-row configuration utilizing suture augmentation via the triceps tendon. Osseous union and perioperative complications were uniformly assessed. Results: Suture anchor fixation was performed on 17 patients with displaced olecranon fractures. Functional outcome scores were collected from 12 patients (70.6%). The mean age at the time of surgery was 65.6 years, and the mean follow-up was 5.6 years. Sixteen of 17 patients (94%) achieved osseous union in an acceptable position. No hardware-related complications or fixation failure occurred. Mean postoperative shortened disabilities of the arm, shoulder, and hand (QuickDASH) score was 3.8±6.9, and mean Oxford Elbow Score was 47.5±1.0, with nine patients (75%) achieving a perfect score. Conclusions: Suture anchor fixation of displaced olecranon fractures resulted in excellent midterm functional outcomes. Additionally, this technique resulted in high rates of osseous union without any hardware-related complications or fixation failures. Level of evidence: IV. [ABSTRACT FROM AUTHOR]

The deltoid ligament is vitally important in the stability of the ankle and preventing excessive medial ankle movement. Historically, the impact of medial ankle instability has not been well understood in the setting of chronic ankle instability. A retrospective review of 226 patients treated for ankle instability between 2017 and 2022 identified 40 patients who required both medial and lateral repair. Decision for medial deltoid repair was based upon patient presentation, MRI findings, intraoperative fluoroscopy and final confirmation via arthroscopic positive "drive-through sign". Preoperative and postoperative American Orthopedic Foot and Ankle Society (AOFAS) hindfoot-ankle scores, Patient-Recorded Outcomes Measurement Information System (PROMIS) scores, and Karlsson-Peterson Ankle Function (K&P) scores were obtained and compared. There were statistically significant improvements found in all 3 scoring systems at a mean follow-up time of 11.7 months postoperatively. In the setting of chronic ankle instability, consideration should be given to the evaluation and potential repair of the deltoid ligament in order to provide sufficient stability to the medial ankle. [ABSTRACT FROM AUTHOR]

Biodegradable suture anchors based on Mg-Nd-Zn-Zr alloy were developed for ligament-to-bone fixation in rotator cuff surgeries. The Mg alloy anchors were designed with structural features of narrow tooth and wide tooth, and simulated through finite element analysis (FEA). Meanwhile, the corrosion behaviors of the Mg alloy anchors were studied by immersion test and the mechanical properties were investigated by measuring the maximum torque and pull-out force. The simulation result showed that the wide-tooth anchor exhibited more a uniform stress distribution and lower shear stress in the torsion process, suggesting a satisfactory torsional resistance of this structure. Meanwhile, the wide-tooth anchor exhibited a lower Von-Mises stress after applying the same pull-out force in the simulation, indicating a higher resistance to pull-out failure of the anchor. The result of the immersion test indicated that the wide-tooth anchor exhibited a slightly slower corrosion rate in Hank's solution after 14-day immersion, which was beneficial to enhance the structural and mechanical stability of the biodegradable suture anchor. Furthermore, the results of the mechanical properties test demonstrated that the wide-tooth anchor showed superior performance with higher maximum torques and axial pull-out forces before and after corrosion. More importantly, the axial pull-out force and maximum torque for the wide-tooth anchor decreased by 5.86% and 8.64% after corrosion, which were significantly less than those for the narrow-tooth anchor. Therefore, the wide-tooth suture anchor with lower corrosion rate, higher mechanical properties and structural stability is a promising candidate for ligament-bone fixation in the repair of rotator cuff injuries. [ABSTRACT FROM AUTHOR]

Purpose: This single-centre study aimed to review the postoperative outcomes of distal biceps avulsion repair using a single incision with the endo-button technique. Methods: A retrospective cohort study was performed of a single surgeon series of distal biceps repairs performed consecutively from September 2016 to September 2020. At two years, outcome measures included Oxford Elbow Score (OES), range of movement (ROM), complications and ongoing issues. Results: Forty-five distal biceps tendon repairs were performed on 43 patients with a mean follow-up of 3.2 years (1.1–5.3). The average OES was 46 (11–48), and 90% of patients recovered a comparable range of movement to the contralateral side. Two patients developed re-rupture (4%) on days 0 and 9 of surgery, but there were no late re-ruptures of the repair. Conclusion: Short-term outcomes from distal biceps tendon repair show low complication rates, high patient satisfaction and good functional outcomes. The results would support acute surgical treatment of active, working-age, patients with distal biceps tendon ruptures. [ABSTRACT FROM AUTHOR]

la réinsertion transosseuse est venue en complément de la technique du pull-out selon Bunnell dans la réparation des lésions tendineuses des fléchisseurs profonds en zone I. Le but de cette étude est de comparer les différents dispositifs sur le marché en termes de complication, de récupération fonctionnelle et de facilité d'utilisation. Il s'agit d'une étude monocentrique incluant tous les patients ayant bénéficié d'une réinsertion transosseuse par ancre de 2010 à 2021 avec un suivi d'au moins 6 mois. Vingt-sept patients ont été inclus. Les ancres utilisées étaient de différents types : Microfix® Quickanchor plus® et Miniquick anchor® de la société DePuy Mitek ; Juggerknot® Soft Anchor 1.0 mm de la société Zimmer-Biomet ; ou des Kerifix® 4.0 de la société KeriMedical. Nous avons analysé les données per-opératoires, les complications et la récupération fonctionnelle par le score de quickDASH. La moyenne d'âge était de 38,6 ans (± 16,1), les caractéristiques démographiques étaient identiques dans les différents groupes. Nous retrouvons une différence significative quant au nombre d'ancres utilisées en peropératoire avant une pose définitive (p = 0,02) en défaveur des ancres Juggerknot®. On ne note aucune différence significative en termes de complications et de récupérations fonctionnelles évaluées par le quickDASH. Notre étude ne retrouve pas de différences significatives entre les différentes ancres quant aux complications et à la récupération fonctionnelle qui en découlent. Certaines ancres semblent avoir une meilleure accroche lors de la pose que d'autres. Transosseous reinsertion has been used to complement the Bunnell pull-out technique in the repair of zone I deep flexor tendon injuries. The aim of this study is to compare the different devices on the market in terms of complication, functional recovery and ease of use. This is a single-center study including all patients who underwent transosseous anchor reinsertion from 2010 to 2021 with a minimum of 6 months of follow-up. Twenty-seven patients were included. The anchors used were of different types: Microfix® Quickanchor plus® and Miniquick anchor® from DePuy Mitek; Juggerknot® Soft Anchor 1.0 mm from Zimmer-Biomet; or Kerifix® 4.0 from KeriMedical. We analyzed intraoperative data, complications and functional recovery by quickDASH score. The average age was 38.6 years (± 16.1), the demographic characteristics were identical in the different groups. There was a significant difference in the number of anchors used intraoperatively before definitive placement (P = 0.02), to the disadvantage of the Juggerknot® anchors. There was no significant difference in terms of complications and functional recovery evaluated by the quickDASH. Our study did not find significant differences between the different anchors in terms of complications and functional recovery. Some anchors seem to have a better grip during placement than others. [ABSTRACT FROM AUTHOR]

Background Displaced olecranon fractures constitute a challenging problem for elbow surgeons. The purpose of this study is to evaluate the role of suture anchor fixation for treating patients with displaced olecranon fractures. Methods A retrospective review was performed for all consecutive patients with displaced olecranon fractures treated with suture anchor fixation with at least 2 years of clinical follow-up. Surgical repair was performed acutely in all cases with nonmetallic suture anchors in a double-row configuration utilizing suture augmentation via the triceps tendon. Osseous union and perioperative complications were uniformly assessed. Results Suture anchor fixation was performed on 17 patients with displaced olecranon fractures. Functional outcome scores were collected from 12 patients (70.6%). The mean age at the time of surgery was 65.6 years, and the mean follow-up was 5.6 years. Sixteen of 17 patients (94%) achieved osseous union in an acceptable position. No hardware-related complications or fixation failure occurred. Mean postoperative shortened disabilities of the arm, shoulder, and hand (QuickDASH) score was 3.8±6.9, and mean Oxford Elbow Score was 47.5±1.0, with nine patients (75%) achieving a perfect score. Conclusions Suture anchor fixation of displaced olecranon fractures resulted in excellent midterm functional outcomes. Additionally, this technique resulted in high rates of osseous union without any hardware-related complications or fixation failures. Level of evidenceIV.

Aims: This study aimed to establish the optimal fixation methods for calcaneal tuberosity avulsion fractures with different fragment thicknesses in a porcine model. Methods: A total of 36 porcine calcanea were sawed to create simple avulsion fractures with three different fragment thicknesses (5, 10, and 15 mm). They were randomly fixed with either two suture anchors or one headless screw. Load-to-failure and cyclic loading tension tests were performed for the biomechanical analysis. Results: This biomechanical study predicts that headless screw fixation is a better option if fragment thickness is over 15 mm in terms of the comparable peak failure load to suture anchor fixation (headless screw: 432.55 N (SD 62.25); suture anchor: 446.58 N (SD 84.97)), and less fracture fragment displacement after cyclic loading (headless screw: 3.94 N (SD 1.76); suture anchor: 8.68 N (SD 1.84)). Given that the fragment thickness is less than 10 mm, suture anchor fixation is a safer option. Conclusion: Fracture fragment thickness helps in making the decision of either using headless screw or suture anchor fixation in treating calcaneal tuberosity avulsion fracture, based on the regression models of our study. Cite this article: Bone Joint Res 2023;12(8):504–511.

Objective Greater tuberosity (GT) fragments were communicated, and additional techniques to increase the GT fragment stability after the locking plate fixation was necessary. This study aimed to analyze the reinforcement effects on the anterior‐avulsion GT fragment in Neer three‐part proximal humeral fractures (PHFs) using transosseous suture and suture anchor techniques. Methods Eighteen fresh‐frozen human cadaveric shoulder specimens were used in the study. Standardized fracture of the GT and surgical neck was created in 18 human cadaveric proximal humerus. The GT fragments were reinforced with transosseous suture (TS), suture anchor (SA), and suture in addition to the PHILOS plate fixation. The fixed humerus was tested by applying static loading to the supraspinatus tendon. Load forces and fragment displacement were evaluated by a biomechanical testing machine, and the load to 3‐ and 5‐mm displacements, load to failure, and mode of failure were recorded for all specimens. Nonparametric variables were examined by the Kruskal–Wallis test, and the Bonferroni post hoc test was used to analyze the mean loads to create 3‐ and 5‐mm displacements as well as the failure load. Results The age, female proportion, and bone mineral density showed no statistically significant differences between the three groups. The mean loading force to create 3‐mm and 5‐mm displacement in the TS group (254.9 ± 77.4, 309.6 ± 152.7) were significantly higher than those in the suture group (136.1 ± 16.7, 193.4 ± 14.5) (P = 0.024, P = 0.005). For the SA group, the force to create 3‐ and 5‐mm displacement (204.3 ± 60.9, 307.8 ± 73.5) were comparable to those in the TS group (P = 0.236, P = 0.983). Moreover, the loading force to failure in the TS group (508.6 ± 217.7) and SA group (406.6 ± 114.9) was significantly higher than that in the suture group (265.9 ± 52.1) (P = 0.021, P = 0.024). In the TS group, three failed due to tendon‐bone junction rupture; bone tunnel broken occurred in two specimens; suture rupture could also be seen in one specimen. All specimens in the suture group failed because of suture rupture. In the SA group, three specimens failed due to suture rupture; two failed secondary to tendon‐bone junction rupture; and one failed because of shaft fracture. Conclusions Transosseous suture is a new type of reinforcement for GT fragment in Neer‐three part PHFs. The transosseous suture was superior to the suture only in the reinforcement of the anterior‐avulsion GT fragment of Neer three‐part PHFs, and it had comparable biomechanical strength to the suture anchor.

Current materials comprising suture anchors used to reconstruct ligament-bone junctions still have limitation in biocompatibility, degradability or mechanical properties. Magnesium alloys are potential bone implant materials, and Mg2+ has been shown to promote ligament-bone healing. Here, we used Mg-2 wt.% Zn-0.5 wt.% Y-1 wt.% Nd-0.5 wt.% Zr (ZE21C) alloy and Ti6Al4V (TC4) alloy to prepare suture anchors to reconstruct the patellar ligament-tibia in SD rats. We studied the degradation behavior of the ZE21C suture anchor via in vitro and in vivo experiments and assessed its reparative effect on the ligament-bone junction. In vitro, the ZE21C suture anchor degraded gradually, and calcium and phosphorus products accumulated on its surface during degradation. In vivo, the ZE21C suture anchor could maintain its mechanical integrity within 12 weeks of implantation in rats. The tail of the ZE21C suture anchor in high stress concentration degraded rapidly during the early implantation stage (0–4weeks), while bone healing accelerated the degradation of the anchor head in the late implantation stage (4–12weeks). Radiological, histological, and biomechanical assays indicated that the ZE21C suture anchor promoted bone healing above the suture anchor and fibrocartilaginous interface regeneration in the ligament-bone junction, leading to better biomechanical strength than the TC4 group. Hence, this study provides a basis for further research on the clinical application of degradable magnesium alloy suture anchors.

Abstract Background To evaluate the feasibility and clinical effect of the suture anchor combined with external fixation in the treatment of the lateral femoral condyle Hoffa fracture. Methods In this study, a retrospective study was conducted to analyze the feasibility of treating fourteen patients (eight men and six women) with Hoffa fractures admitted to our Hospital from January 2016 to October 2021 with combined external fixation using incisional reduction anchor nailing. The age of the patients ranged from 23 to 45 years, with an average of 37.5 years. According to Letenneur’s classification, there were eight cases of type I, three cases of type II, and three cases of type III. The functional assessment of Letenneur was used to measure the clinical outcome. Results All patients had one-stage wound healing, and all patients were followed up for 12 to 18 months after surgery, and all fractures healed well, with normal knee flexion and extension activities, and no complications such as fracture displacement, anchor nail loosening, or fracture malunion were observed. The clinical outcome was evaluated according to the functional evaluation criteria of Letenneur et al. The clinical outcome of fourteen patients: excellent in thirteen cases and good in one case, with an overall excellent rate of 100%. Conclusions Our study results indicate that the use of anchor nailing combined with external fixation for Hoffa fractures of the femoral condyle has some clinical reference significance because it is less invasive, has fewer complications, does not require secondary removal, and is worthy of clinical application. Trial registration: Retrospectively registered.

PurposeFor deep deltoid ligament ruptures near the medial malleolar attachment, anchors were usually placed at the posterior colliculus and intercollicular groove. However, this procedure usually requires a prolonged surgical incision to fully expose the deep deltoid ligament, causing more trauma. In order to reduce surgical trauma, we explored the treatment outcomes of suture anchor into the talus combined with transosseous suture in the medial malleolar for the treatment of deep deltoid ligament ruptures near the medial malleolar attachment or midsubstance rupture.Patients and methodsThis is a retrospective study of patients who received suture anchor into the talus combined with transosseous suture in the medial malleolar for repairing deltoid ligament ruptures near the medial malleolar attachment or midsubstance rupture. The outcome measures include the American Orthopaedic Foot and Ankle Society (AOFAS) ankle-hindfoot score, visual analogue scale (VAS), and the active range of motion (ROM) of the ankle at the final follow-up visit after surgery. Medial malleolus gap was evaluated by radiographic examination.ResultsThis study included 64 patients. The mean follow-up time was 36.3 ± 15.2 months. There were 43 patients with injuries on the medial malleolar side, and 21 cases on the midsubstance. The average AOFAS and VAS were 87.5 ± 4.9 and 0.7 ± 0.5, respectively. No significance in medial malleolus gap between the contralateral side and affected side was observed.ConclusionFor deltoid ligament ruptures near the medial malleolar attachment or midsubstance rupture, suture anchor into the talus combined with transosseous suture in the medial malleolar yields good clinical effect and outcome, is an optimal management of ankle syndesmosis injuries.

Background: Biceps tenodesis is an effective treatment for symptomatic long head of biceps tendon pathology. Recently the arthroscopic "double lasso-loop" suture anchor (DLSA) technique was described, advantaged by reduced cost, complexity, and operative time. We aimed to compare the in vitro strength of DLSA with conventional interference screws (IS). Methods: A biomechanical analysis was conducted on 14 sheep shoulders (8 DLSA, 6 IS), consisting of a 500-cycle cyclic loading experiment of 5–70 N and ultimate failure load (UFL) test where each specimen was pulled until failure. Displacement (mm) was recorded every 100 cycles, while stiffness and UFL were observed. Results: Cyclic displacement was significantly lower with DLSA at 100 cycles, but not above. During the UFL test, IS was stiffer (27.68 ± 6.56 N/mm versus 14.10 ± 5.80 N/mm, p =.005) and had higher UFL (453.67 ± 148.55 N versus 234.22 ± 44.57 N, p =.001) than DLSA. All DLSA failures occurred with suture/anchor pull-out, while all IS constructs failed at the muscle/tendon. Discussion: Comparison of the novel DLSA technique with a traditional IS method found lower initial displacement. While our IS constructs could withstand higher UFL, peak load characteristics of DLSA were similar to previous ovine studies. Hence, the DLSA technique is a viable alternative to IS for biceps tenodesis with its purported non-biomechanical advantages. [ABSTRACT FROM AUTHOR]

Acromioclavicular (AC) joint dislocation is common in sportsmen and physically active population. Its management depends upon the grade of injury and functional demands of the patient. A variety of surgical procedures have been described with different limitations and advantages. The present study has assessed the clinical and radiological outcome of acute AC joint dislocation managed with a 3.5 mm Titanium suture anchor and 2 mm miniplate construct which requires lesser dissection, surgical time and thus contact with the patient as mandated by COVID-19 pandemic. We enrolled 10 patients of Rockwood type-III, IV and V acute AC joint injury (<3 weeks old) reporting at this hospital from Feb 2020 to May 2021. All were tested for COVID-19 using reverse transcriptase polymer chain reaction test (RTPCR) and managed by closed/open reduction and fixation with a 3.5 mm Titanium Suture Anchor and a 2 mm Titanium miniplate construct. Follow-up was done at 3, 6 and 9 month post-operatively. The average age of patients was 31 yrs. RTPCR test for COVID-19 was negative in all patients. Median surgical time was 25 min (Interquartile Range[IQR] = 16–34 min) and median follow-up duration was 36 weeks (IQR = 33–39 weeks). Median visual analogue scale score and IQR at pre-operative, 3 month, 6 month and 9 month follow-up was 7(IQR = 6–8), 3.5(IQR = 2.5–4.5), 2(IQR = 0) and 1(IQR = 0), respectively. Median constant score at pre-operative, 3 month, 6 month and 9 month follow-up were 34(IQR = 25–43), 65.5(IQR = 60.5–70.5), 82.5(IQR = 77.5–87.5) and 88(IQR = 81–95). There was significant improvement in clinical status (non parametric-Friedman test p < 0.001). Radiographs showed no loss of reduction, fracture or implant failure till last follow-up. Minimally invasive technique with a 3.5 mm Ti-suture anchor and 2 mm plate is an easy, fast and reliable construct for the management of acute AC dislocation in physically active population. [ABSTRACT FROM AUTHOR]

Introduction: Achilles tendon sleeve avulsion (ATSA) is a rare injury that often results from pre-existing insertional Achilles tendinopathy and occurs when a tendon avulses from the insertion as a continuous sleeve. To date, outcomes of operative treatment for ATSA in older patients have not been reported. Therefore, this study aims to compare the characteristics and outcomes of Achilles tendon (AT) reattachment with or without tendon lengthening for ATSA between older and younger patients. Materials and methods: This study enrolled 25 consecutive patients who underwent operative treatment following a diagnosis of ATSA between January 2006 and June 2020. The inclusion criterion was a minimum follow-up duration of one year. The enrolled patients were divided into two groups according to their age at operation: ≥ 65 years (group 1, 13 patients) and < 65 years (group 2, 12 patients). AT reattachment was performed in all patients using two 5.0-mm suture anchors after an inflamed distal stump resection in the 30° plantar-flexed ankle position. Results: The degree of active dorsiflexion and plantar flexion, mean visual analog scale score, and Victorian Institute of Sports Assessment-Achilles scores at the final follow-up were not significantly different between the two groups (P > 0.05 each). The rate of satisfactory clinical outcomes (defined as fair or greater) was 84.6% and 91.7% in groups 1 and 2, respectively. Conclusion: We observed that comparable clinical outcomes could be achieved after AT reattachment with or without lengthening for ATSA between older and younger patients. [ABSTRACT FROM AUTHOR]

BACKGROUND: For young patients with proximal lesions of long head of biceps tendons with high requirements for upper limb movement, the commonly tendon fixation includes interface extrusion screw fixation and suture anchor ligation fixation. At present, there are few clinical reports and no conclusion on the comparison of the clinical efficacy of the two. OBJECTIVE: To compare the clinical efficacy of proximal lesions of long head of biceps tendons by interface extrusion screw fixation and suture anchor ligation fixation in arthroscopy. METHODS: Totally 52 patients with proximal lesions of long head of biceps tendons treated in Nanchang Hongdu Hospital of TCM from January 2019 to December 2020 were enrolled and randomly divided into interface extrusion screw group (n=29) and suture screw group (n=23). The patients in both groups were subjected to interface extrusion screw fixation and suture anchor ligation fixation in arthroscopy, respectively. Before, 1, 3, 6, and 12 months after operation, and during last follow-up, shoulder visual analog scale score, the American shoulder and elbow surgeons score, and range of motion in anterior flexion of shoulder and internal and external rotation at elbow flexion 90° were compared between the two groups. Elbow flexion muscle strength, reoperation rate and complication rate (Popeye sign) were compared between the two groups at the last follow-up. RESULTS AND CONCLUSION: The visual analog scale scores, the American shoulder and elbow surgeons score and shoulder range of motion in anterior flexion of shoulder and internal and external rotation at elbow flexion 90° were significantly improved after operation compared with those before operation in both groups (P < 0.05). There were no significant differences in visual analog scale scores, the American shoulder and elbow surgeons score and shoulder range of motion in anterior flexion of shoulder and internal and external rotation at elbow flexion 90° between the two groups before and at various time points after operation (P > 0.05). At the last follow-up, the elbow flexion muscle strength of the two groups reached above grade IV, and the results showed no significant difference. Popeye syndrome occurred in the interface extrusion screw group (14%) and reoperation was performed (7%). In the suture screw group, the incidence of Popeye sign was 4.3% and the reoperation rate was 0%. The incidence of Popeye sign and the reoperation rate were not significantly different between the two groups (P > 0.05). For the proximal lesion of long head of biceps tendons, both the interface extrusion screw fixation and the suture anchor ligation fixation in the arthroscopy can effectively relieve shoulder pain and improve shoulder function within one year and the clinical effects of the two methods are equivalent. [ABSTRACT FROM AUTHOR]

Purpose: Transtibial pullout repair improves the clinical outcomes of medial meniscus (MM) posterior root tears (PRTs); however, reducing MM extrusion remains challenging. Thus, the purpose of this study was to examine the role of additional posterior anchoring (PA) during pullout repair in reducing the severity of MM extrusion compared to pullout repair alone. Methods: Patients who underwent pullout repair with two-cinch stitches (TCS) only or TCS combined with PA (TCS-PA)—deployment of an additional suture anchor in the posteromedial corner of MM—were included retrospectively. MM medial and posterior extrusion (MMME and MMPE), MM extrusion and remaining volume (MMEV and MMRV), and corresponding ratios were evaluated pre-operatively and three months post-operatively using a three-dimensional meniscal model at 10° and 90° of knee flexion and compared within and between groups. Results: A total of 15 and 16 patients treated with TCS and TCS-PA, respectively, were enrolled. At 90° knee flexion, both techniques significantly reduced MMPE (TCS: 4.2 ± 0.7 mm to 3.5 ± 0.6 mm, p < 0.05; TCS-PA: 3.7 ± 0.8 mm to 2.8 ± 0.7 mm, p < 0.05) at three months post-operatively. TCS-PA reduced MMPE more significantly than TCS alone (p < 0.05). Only TCS-PA significantly improved the MMEV and MMRV ratios (39.6 ± 8.9% to 28.1 ± 6.0%, p < 0.05 and 60.4 ± 8.9% to 71.9 ± 6.0%, p < 0.05, respectively). Significance was not found in all other comparisons. Conclusions: Both techniques improved MMPE at knee flexion at the three month follow-up, with TCS-PA providing significantly superior results. Our findings support the evidence that the application of PA may be an effective surgical option for alleviating persistent MMPE. [ABSTRACT FROM AUTHOR]

BACKGROUND: A Hoffa fracture is an unstable intra-articular break that is generally treated with surgery. OBJECTIVE: To evaluate the feasibility and clinical outcomes of using a suture anchor combined with auxiliary fixation for the treatment of a lateral femoral condyle Hoffa fracture. METHODS: The study retrospectively reviewed 8 patients (5 males and 3 females) with a lateral femoral condyle Hoffa fracture who had been treated by combining a suture anchor with auxiliary fixation between January 2016 and April 2020. The mean age of patients was 37.5 years (ranging from 23 to 45). According to Letenneur's classification, there were 4 cases of type I, 2 cases of type II, and 2 cases of type III fractures. The clinical outcomes were assessed using Letenneur's functional assessment. RESULTS: The follow-up duration ranged between 14–24 months. All patients achieved primary healing of the incision and fracture union, as well as normal flexion and extension of the knee joint, with 7 cases showing excellent outcomes and 1 case showing a good outcome. No postoperative complications, such as fracture displacement, anchor loosening, or fracture malunion, occurred in this series. CONCLUSION: Our results indicated that a suture anchor, combined with external fixation, was an effective treatment for a lateral femoral condyle Hoffa fracture. Accordingly, this procedure is worthy of wider clinical application. [ABSTRACT FROM AUTHOR]

Background: The minipig has been used for research in various fields of medicine, even in orthopedics. Though previous studies have already suggested other methods to create osteoporotic bone, those methods had some disadvantages for taking time and efforts. Therefore, we aimed to generate osteoporotic proximal humerus and proximal femur of minipig using EDTA solution and validate their properties through dual energy X-ray absorptiometry (DEXA), micro-CT study, histological and biomechanical ways. Methods: Six minipigs were used. Out of a total of 12 proximal humerus (PH) and 12 proximal femurs (PF), 6 PH and 6 PF were used as the decalcified group and the opposite side as the non-decalcified group. In vitro decalcification with Ca-chelating agents (0.5 M EDTA solution, pH 7.4) was used. Area BMD (aBMD) was measured using DEXA, Volumetric BMD (vBMD), and microstructure were measured using micro-CT. Universal testing machine was used to measure ultimate load to failure (ULTF). Each group was compared using two types of suture anchors (all-suture anchor, ASA, and conventional screw type anchor, CA). Results: There was a significant difference in aBMD and cortical thickness (aBMD: decalcified, 0.433 ± 0.073 g/cm2, undecalcified, 0.962 ± 0.123 g/cm2, p < 0.001; cortical thickness: decalcified, 0.33 ± 0.34 mm, undecalcified, 1.61 ± 0.45 mm, p < 0.001). In the case of ASA, the ULTF was significantly lower in the decalcified group (decalcified: 176.6 ± 74.2 N, non-decalcified: 307.7 ± 116.5 N, p = 0.003). In the case of CA, there was no significant difference (decalcified: 265.1 ± 96.0 N, undecalcified: 289.4 ± 114.5 N, p = 0.578). Conclusion: We demonstrated that decalcification with EDTA solution significantly decreased aBMD, vBMD, and cortical thickness. Decalcified minipig bone using EDTA resulted in similar biomechanical properties as osteoporotic human bone with respect to anchor pull-out. [ABSTRACT FROM AUTHOR]

Objective: Greater tuberosity (GT) fragments were communicated, and additional techniques to increase the GT fragment stability after the locking plate fixation was necessary. This study aimed to analyze the reinforcement effects on the anterior‐avulsion GT fragment in Neer three‐part proximal humeral fractures (PHFs) using transosseous suture and suture anchor techniques. Methods: Eighteen fresh‐frozen human cadaveric shoulder specimens were used in the study. Standardized fracture of the GT and surgical neck was created in 18 human cadaveric proximal humerus. The GT fragments were reinforced with transosseous suture (TS), suture anchor (SA), and suture in addition to the PHILOS plate fixation. The fixed humerus was tested by applying static loading to the supraspinatus tendon. Load forces and fragment displacement were evaluated by a biomechanical testing machine, and the load to 3‐ and 5‐mm displacements, load to failure, and mode of failure were recorded for all specimens. Nonparametric variables were examined by the Kruskal–Wallis test, and the Bonferroni post hoc test was used to analyze the mean loads to create 3‐ and 5‐mm displacements as well as the failure load. Results: The age, female proportion, and bone mineral density showed no statistically significant differences between the three groups. The mean loading force to create 3‐mm and 5‐mm displacement in the TS group (254.9 ± 77.4, 309.6 ± 152.7) were significantly higher than those in the suture group (136.1 ± 16.7, 193.4 ± 14.5) (P = 0.024, P = 0.005). For the SA group, the force to create 3‐ and 5‐mm displacement (204.3 ± 60.9, 307.8 ± 73.5) were comparable to those in the TS group (P = 0.236, P = 0.983). Moreover, the loading force to failure in the TS group (508.6 ± 217.7) and SA group (406.6 ± 114.9) was significantly higher than that in the suture group (265.9 ± 52.1) (P = 0.021, P = 0.024). In the TS group, three failed due to tendon‐bone junction rupture; bone tunnel broken occurred in two specimens; suture rupture could also be seen in one specimen. All specimens in the suture group failed because of suture rupture. In the SA group, three specimens failed due to suture rupture; two failed secondary to tendon‐bone junction rupture; and one failed because of shaft fracture. Conclusions: Transosseous suture is a new type of reinforcement for GT fragment in Neer‐three part PHFs. The transosseous suture was superior to the suture only in the reinforcement of the anterior‐avulsion GT fragment of Neer three‐part PHFs, and it had comparable biomechanical strength to the suture anchor. [ABSTRACT FROM AUTHOR]

The purpose of this study is to describe a technique of using an affordable suture anchor for various soft tissue repairs of both upper and lower limb surgeries in our series of patients. Eighteen patients with minimum 1-year follow-up after various upper limb surgeries using modified suture anchor were assessed both clinically and radiographically. In all 18 cases, the purpose of the suture anchor was served in terms of attachment of ligament or the tendon. There was no incidence of breakage of suture material or loosening of the implant seen during the insertion. There were no complications related to the implant noted. This novel technique turns a simple screw and suture material into an efficient suture anchor while saving time, being quick, easy, affordable and repeatable. Level of Evidence: Level V (Therapeutic) [ABSTRACT FROM AUTHOR]

Purpose: All-inside anterior talofibular ligament (ATFL) repair using anchors is frequently used to manage chronic lateral ankle instability (CLAI) with satisfactory functional outcomes. It remains unclear whether there are differences in the functional results between the use of one or two double-loaded anchors. Methods: This retrospective cohort study included 59 CLAI patients who underwent an all-inside arthroscopic ATFL repair procedure from 2017 to 2019. Patients were divided into two groups according to the number of anchors used. In the one-anchor group (n = 32), the ATFL was repaired with one double-loaded suture anchor. In the two-anchors group (n = 27), the ATFL was repaired with two double-loaded suture anchors. At the last follow-up time point, the Visual Analogue Scale (VAS) scores, American Orthopedic Foot and Ankle Society (AOFAS) scores, Karlsson Ankle Function Score (KAFS), Anterior Talar Translation (ATT), Active Joint Position Sense (AJPS), and the rate of return to sports in both groups were compared. Results: All the patients were followed up for at least 24 months. Improvement in the functional results (VAS, AOFAS, KAFS, ATT, and AJPS) were recorded at the final follow-up time point. No significant differences were observed regarding VAS, AOFAS, KAFS, ATT, and AJPS between the two groups. Conclusion: In patients with CLAI undergoing all-inside arthroscopic ATFL repair, the use of either one or two double-loaded suture anchors produces comparable and predictably good functional outcomes. Level of evidence: Level III. [ABSTRACT FROM AUTHOR]

Background: Arthroscopic suture repair is the main treatment option for hip labral tears; however, anchor insertion and placement from arthroscopic portals is difficult. Purpose: To quantitatively evaluate the safety of various arthroscopic portals for suture anchor placement during hip labral repair. Study Design: Descriptive laboratory study. Methods: The computed tomography scans of 20 patients with normally developed hip joints were used to create 3-dimensional models. The distances from the anchor to the articular cartilage (DAC) and from the acetabular insertion point to the cortical bone (DCB) were measured in the anterolateral portal (AL), posterolateral portal (PL), midanterior portal (MAP), medial MAP, and 3 distal anterolateral accessory portals (DALAs): DALA-proximal, DALA-middle, and DALA-distal. Labral tears were divided into anterior (4, 3, and 2 o'clock), lateral (1, 12, and 11 o'clock), and posterior (10, 9, and 8 o'clock) acetabular zones, and the Kruskal-Wallis and Mann-Whitney U test were used to compare DAC and DCB in the zones. The success rate was defined as anchors placed with DAC ≥1 mm and DCB ≥15 mm. Results: The DAC was significantly smaller in the AL at 1 o'clock (0.68 ± 0.32 mm; P <.001) and 12 o'clock (0.37 ± 0.30 mm; P <.001), and in the PL at 12 o'clock (-0.35 ± 0.38 mm; P <.001) and 11 o'clock (0.60 ± 0.24 mm; P <.001). The DCB was significantly smaller in the DALA-P at 3 o'clock (8.93 ± 2.12 mm; P <.001) and 11 o'clock (9.59 ± 2.84 mm; P <.001), the MAP at 12 o'clock (13.76 ± 3.89 mm; P <.001) and 11 o'clock (0.27 ± 0.27 mm; P <.001), and the MMA at 12 o'clock (5.96 ± 2.31 mm; P <.001) and 11 o'clock (0 mm; P <.001). Success rates were high for MAP and MMA between 4 o'clock and 1 o'clock, for DALA-proximal at 12 o'clock, for AL at 11 o'clock, and for PL between 10 o'clock and 8-o'clock. Conclusion: There were significant differences in the success rate of anchor placement using different portals during hip arthroscopic labral repair. Clinical Relevance: MAP is recommended for labral repair between 4 o'clock and 1 o'clock, DALA-P is recommended between 2 o'clock and 12 o'clock, AL is suitable at 11 o'clock, and PL is suitable between 10 o'clock and 8 o'clock. [ABSTRACT FROM AUTHOR]

Background: Segmental medial meniscal allograft transplantation (MAT) has been shown to restore knee biomechanics; however, stable fixation of the transplantation is critical to avoid extrusion and maximize healing. Purpose: To evaluate the degree of meniscal extrusion and biomechanical function of segmental medial MAT performed with meniscocapsular sutures versus repair augmentation with knotless suture anchors. Study Design: Controlled laboratory study. Methods: Segmental midbody medial meniscectomy and subsequent segmental medial MAT were performed on 10 fresh-frozen cadaveric knees. The knees were then loaded in a dynamic tensile testing machine to 1000 N for 60 seconds at 0°, 30°, 60°, and 90° of flexion, and 4 conditions were tested: (1) intact, (2) segmental defect, (3) inside-out segmental repair, and (4) anchor plus inside-out segmental repair of the medial MAT. Meniscal extrusion was measured using high-fidelity ultrasound imaging. The mean contact area and the mean and peak contact pressures were assessed with submeniscal pressure-mapping sensors. Data from testing conditions were compared with 2-way repeated-measures analysis of variance, with pairwise comparison using the Bonferroni method. Results: At 90° of flexion, the segmental defect state showed a higher degree of meniscal extrusion compared with all other states (P ≤.012). There was no difference in the degree of meniscal extrusion between the intact state and the inside-out repair or anchor plus inside-out segmental repair states at all knee flexion angles (P >.05). There was no significant difference in the mean and peak contact pressures among the 4 states at all flexion angles except that at 0° of knee flexion there was significantly lower peak contact pressure at the medial compartment after anchor plus inside-out segmental repair compared with the segmental defect state (P =.048). Conclusion: Meniscal extrusion was not significantly increased at any flexion angle after segmental resection. The addition of knotless anchors did not improve meniscal extrusion or contact pressures/area compared with capsular repair alone. The addition of knotless anchors did improve contact mechanics from the segmental defect state, but only at 0° of flexion. Clinical Relevance: The addition of knotless suture anchors to segmental meniscal transplantation increased stabilization of the meniscus at full extension compared with repair with sutures alone. This increased stabilization may lead to better long-term outcomes. [ABSTRACT FROM AUTHOR]

Purpose: To introduce a novel surgical technique for arthroscopic reduction and double-row bridge fixation using trans-subscapularis tendon portal for anterior glenoid fracture and to evaluate the clinical and radiological outcomes. Methods: A total of 22 patients who underwent arthroscopic reduction and double-row bridge fixation for an acute anterior glenoid fracture were retrospectively evaluated. Arthroscopic surgery was performed using four portals including a trans-subscapularis tendon portal. All patients underwent 3D-CT preoperatively and one day and one year postoperatively to evaluate the fracture fragment size, reduction status, and presence of fracture union. To evaluate the degree of fragment displacement, articular step-off and medial fracture gap were measured using 3D-CT. Clinical outcomes were assessed based on the ASES and Constant scores. Postoperative glenohumeral joint arthritis was evaluated using plain radiographs with the Samilson and Prieto classification. Results: The average preoperative fracture fragment size was 25.9 ± 5.6%. Articular step-off (preoperative: 6.0 ± 3.3 mm, postoperative one day: 1.1 ± 1.6 mm, P < 0.001) and medial fracture gap (preoperative: 5.2 ± 2.6 mm, postoperative one day: 1.9 ± 2.3 mm, P < 0.001) were improved after surgery. On the postoperative one year 3D-CT, 20 patients achieved complete fracture union, and two patients showed partial union. Postoperative glenohumeral joint arthritis was observed in four patients. At the last visit, the ASES score was 91.8 ± 7.0 and the Constant score was 91.6 ± 7.0. Conclusion: Arthroscopic reduction and double-row bridge fixation using a trans-subscapularis tendon portal for acute anterior glenoid fracture achieved satisfactory clinical outcomes and anatomical reduction as demonstrated by a low degree of articular step-off and medial fracture gap. Level of evidence: Level IV. [ABSTRACT FROM AUTHOR]

Intraoperative periprosthetic humeral fractures are a rare but debilitating complication of reverse shoulder arthroplasty and can occur during multiple stages of the procedure. Prior biceps tenodesis has been found to reduce cortical humeral strength and predispose the patient to humeral fracture. We present a case of a 68-year-old female with a previous history of biceps tenodesis due to an irreparable rotator cuff tear. Months later, and after symptoms persisted, a reverse shoulder arthroplasty was performed. During the surgery and while performing final reduction, a fracture line was observed involving the hole used for the previous tenodesis procedure. The fracture was repaired, and the patient reported favorable outcomes. We report several factors that might have contributed to sustenance of this intraoperative fracture including prior biceps tenodesis, use of a press fit humeral stem, and the sex of the patient.Level of evidence: V.

Abstract Background Transosseous-equivalent suture-bridge (TOE-SB) and independent double-row (IDR) repair techniques were developed to treat rotator cuff tears. The study was designed to prove that both TOE-SB and IDR techniques provided comparable clinical results and retear rate for medium to massive posterosuperior rotator cuff tears, while the surgical time and number of suture anchor used were less in the IDR group. Study design Level of evidence: level III, Retrospective comparative study. Methods Patients with medium to massive posterosuperior rotator cuff tears receiving arthroscopic TOE-SB and IDR between November 2016 to October 2019 were retrospectively enrolled. All patients were confirmed to have grade ≤ 2 fatty infiltration in the muscles of the torn tendons. Revision, concomitant subscapularis tear, acromiohumeral distance