Search

Because virus vectors can spread systemically autonomously, they are powerful vehicles with which to deliver genome-editing tools into plant cells. Indeed, a vector based on a positive-strand RNA virus, potato virus X (PVX), harboring SpCas9 and its single guide RNA (sgRNA), achieved targeted mutagenesis in inoculated leaves of Nicotiana benthamiana. However, the large size of the SpCas9 gene makes it unstable in the PVX vector, hampering the introduction of mutations in systemic leaves. Smaller Cas variants are promising tools for virus vector-mediated genome editing; however, they exhibit far lower nuclease activity than SpCas9. Recently, AsCas12f, one of the smallest known Cas proteins so far (one-third the size of SpCas9), was engineered to improve genome-editing activity dramatically. Here, we first confirmed that engineered AsCas12f variants including I123Y/D195K/D208R/V232A exhibited enhanced genome-editing frequencies in rice. Then, a PVX vector harboring this AsCas12f variant was inoculated into N. benthamiana leaves by agroinfiltration. Remarkably, and unlike with PVX-SpCas9, highly efficient genome editing was achieved, not only in PVX-AsCas12f-inoculated leaves but also in leaves above the inoculated leaf (fourth to sixth upper leaves). Moreover, genome-edited shoots regenerated from systemic leaves were obtained at a rate of >60%, enabling foreign DNA-free genome editing. Taken together, our results demonstrate that AsCas12f is small enough to be maintained in the PVX vector during systemic infection in N. benthamiana and that engineered AsCas12f offers advantages over SpCas9 for plant genome editing using virus vectors. [ABSTRACT FROM AUTHOR]

Evolving microbes for desirable phenotypes, including stress resistance or the production of specific compounds, is a powerful approach in biotechnology and precision fermentation. Genetic diversity is essential for evolving microorganisms as it provides the raw material for screening/selection of improved variants. Efficient evolutionary engineering often requires tools that increase genetic diversity through tuning of mutation rates and the genomic location of mutations. Novel synthetic biology tools enable a controlled increase of the genetic diversity of the host. These tools can be implemented either in vitro or in vivo and target different types of mutations and target windows. Evolutionary engineering helps to improve cellular processes and metabolic pathways by, for example, optimizing gene stoichiometry or improving enzyme catalysis. The natural process of evolutionary adaptation is often exploited as a powerful tool to obtain microbes with desirable traits. For industrial microbes, evolutionary engineering is often used to generate variants that show increased yields or resistance to stressful industrial environments, thus obtaining superior microbial cell factories. However, even in large populations, the natural supply of beneficial mutations is typically low, which implies that obtaining improved microbes is often time-consuming and inefficient. To overcome this limitation, different techniques have been developed that boost mutation rates. While some of these methods simply increase the overall mutation rate across a genome, others use recent developments in DNA synthesis, synthetic biology, and CRISPR-Cas techniques to control the type and location of mutations. This review summarizes the most important recent developments and methods in the field of evolutionary engineering in model microorganisms. It discusses how both in vitro and in vivo approaches can increase the genetic diversity of the host, with a special emphasis on in vivo techniques for the optimization of metabolic pathways for precision fermentation. [ABSTRACT FROM AUTHOR]

Abstract Background CRISPR Cas9 and Cas12a are the two most frequently used programmable nucleases reported in plant systems. There is now a wide range of component parts for both which likely have varying degrees of effectiveness and potentially applicability to different species. Our aim was to develop and optimise Cas9 and Cas12a based systems for highly efficient genome editing in the monocotyledons barley and wheat and produce a user-friendly toolbox facilitating simplex and multiplex editing in the cereal community. Results We identified a Zea mays codon optimised Cas9 with 13 introns in conjunction with arrayed guides driven by U6 and U3 promoters as the best performer in barley where 100% of T0 plants were simultaneously edited in all three target genes. When this system was used in wheat > 90% of T0 plants were edited in all three subgenome targets. For Cas12a, an Arabidopsis codon optimised sequence with 8 introns gave the best editing efficiency in barley when combined with a tRNA based multiguide array, resulting in 90% mutant alleles in three simultaneously targeted genes. When we applied this Cas12a system in wheat 86% & 93% of T0 plants were mutated in two genes simultaneously targeted. We show that not all introns contribute equally to enhanced mutagenesis when inserted into a Cas12a coding sequence and that there is rationale for including multiple introns. We also show that the combined effect of two features which boost Cas12a mutagenesis efficiency (D156R mutation and introns) is more than the sum of the features applied separately. Conclusion Based on the results of our testing, we describe and provide a GoldenGate modular cloning system for Cas9 and Cas12a use in barley and wheat. Proven Cas nuclease and guide expression cassette options found in the toolkit will facilitate highly efficient simplex and multiplex mutagenesis in both species. We incorporate GRF-GIF transformation boosting cassettes in wheat options to maximise workflow efficiency.

Background: CRISPR Cas9 and Cas12a are the two most frequently used programmable nucleases reported in plant systems. There is now a wide range of component parts for both which likely have varying degrees of effectiveness and potentially applicability to different species. Our aim was to develop and optimise Cas9 and Cas12a based systems for highly efficient genome editing in the monocotyledons barley and wheat and produce a user-friendly toolbox facilitating simplex and multiplex editing in the cereal community. Results: We identified a Zea mays codon optimised Cas9 with 13 introns in conjunction with arrayed guides driven by U6 and U3 promoters as the best performer in barley where 100% of T0 plants were simultaneously edited in all three target genes. When this system was used in wheat > 90% of T0 plants were edited in all three subgenome targets. For Cas12a, an Arabidopsis codon optimised sequence with 8 introns gave the best editing efficiency in barley when combined with a tRNA based multiguide array, resulting in 90% mutant alleles in three simultaneously targeted genes. When we applied this Cas12a system in wheat 86% & 93% of T0 plants were mutated in two genes simultaneously targeted. We show that not all introns contribute equally to enhanced mutagenesis when inserted into a Cas12a coding sequence and that there is rationale for including multiple introns. We also show that the combined effect of two features which boost Cas12a mutagenesis efficiency (D156R mutation and introns) is more than the sum of the features applied separately. Conclusion: Based on the results of our testing, we describe and provide a GoldenGate modular cloning system for Cas9 and Cas12a use in barley and wheat. Proven Cas nuclease and guide expression cassette options found in the toolkit will facilitate highly efficient simplex and multiplex mutagenesis in both species. We incorporate GRF-GIF transformation boosting cassettes in wheat options to maximise workflow efficiency. [ABSTRACT FROM AUTHOR]

α-L-Rhamnosidases with desirable activity and thermostability profiles could be used for the biocatalytic production of the flavonoid glucoside isoquercetin from natural rutin for functional food. Herein, to improve the catalytic activity of GH78 α-L-rhamnosidase BtRha78A from Bacteroides thetaiotaomicron VPI-5482, a list of residues located at the conserved general acid motif were selected for targeted mutagenesis by the sequence alignment of BtRha78A with homologous α-L-rhamnosidases. Ala-scanning mutagenesis and site-directed mutagenesis based on sequence alignment were performed, and the relative activity on rutin was evaluated. Furthermore, the reaction time curves and enzyme kinetics of better mutants were determined. The results indicate that the conversion rates of mutants V338A, V338I, S340A, and G341A were increased by 21.3%, 20.1%, 13.2%, and 1.6%, respectively, compared with the wild type when using whole-cell biotransformation. Moreover, the catalytic efficiency kcat/KM value of mutant V338A was 1.3-fold higher than that of the wild type. The best mutant, V338A, was employed for the enzymatic preparation of isoquercetin via the biotransformation of rutin at a concentration of 2 mM, and 1.80 g of isoquercetin was obtained. The identification of the best mutant V338A lays the foundation for the efficient preparation of isoquercetin via the biotransformation of rutin, which in turn provides theoretical guidance for its large-scale production. [ABSTRACT FROM AUTHOR]

Genome editing in non-model bacteria is important to understand gene-to-function links that may differ from those of model microorganisms. Although species of the Burkholderia cepacia complex (Bcc) have great biotechnological capacities, the limited genetic tools available to understand and mitigate their pathogenic potential hamper their utilization in industrial applications. To broaden the genetic tools available for Bcc species, we developed RhaCAST, a targeted DNA insertion platform based on a CRISPR-associated transposase driven by a rhamnose-inducible promoter. We demonstrated the utility of the system for targeted insertional mutagenesis in the Bcc strains B. cenocepacia K56-2 and Burkholderia multivorans ATCC17616. We showed that the RhaCAST system can be used for loss- and gain-of-function applications. Importantly, the selection marker could be excised and reused to allow iterative genetic manipulation. The RhaCAST system is faster, easier, and more adaptable than previous insertional mutagenesis tools available for Bcc species and may be used to disrupt pathogenicity elements and insert relevant genetic modules, enabling Bcc biotechnological applications. [ABSTRACT FROM AUTHOR]

Climate change has made plants more vulnerable to various stresses, which presents a significant threat to the world’s food supply. Despite several efforts deployed over the last three decades in plant breeding and genetic engineering, there is still a lot to be done for crop improvement. CRISPR/Cas is a naturally occurring genome editing tool adopted from the bacterial adaptive immune defense system. Gene editing has undergone a revolutionary change since the discovery of CRISPR/Cas-based genome engineering. This emerging technology recently implemented, has enabled targeted mutagenesis with unprecedented simplicity and accuracy, making it suitable to edit DNA sequences at site-specific targets with ultimate precision. Currently, this cutting-edge technology has been extensively used and incessantly improved at several orders of magnitude to contribute as a robust approach for studying gene function with a variety of applications that can accelerate basic and applied research toward crop improvement. This mini-review briefly describes some of the major achievements in genome editing tools and highlights future outlooks for these technologies in functional genomics and applied plant biotechnology. [ABSTRACT FROM AUTHOR]

Amino acid deprivation therapy (AADT) is a novel anticancer therapy, considered nontoxic and selective. Thermophilic L-asparaginase enzymes display high stability and activity at elevated temperatures. However, they are of limited use in clinical applications because of their low substrate affinity and reduced activity under physiological conditions, which may necessitate an improved dosage, leading to side effects and greater costs. Thus, in an attempt to improve the activity of L-Asn at 37 °C, with the use of a semi-rational design, eight active-site mutants of Thermococcus litoralis DSM 5473 L-asparaginase Tli10209 were developed. T70A exhibited a 5.11-fold increase compared with the wild enzyme in physiological conditions. Double-mutant enzymes were created by combining mutants with higher hydrolysis activity. T70A/F36Y, T70A/K48L, and T70A/D50G were enhanced by 5.59-, 6.38-, and 5.58-fold. The immobilized enzyme applied in MCF-7 breast cancer cells only required one-seventh of the dose of the free enzyme to achieve the same inhibition rate under near-infrared irradiation. This provides a proof of concept that it is possible to reduce the consumption of L-Asn by improving its activity, thus providing a method to manage side effects. [ABSTRACT FROM AUTHOR]

Plants with genetic diversity have a higher rate of resilience and adaptation to environmental change. Crop species need to diversify genetically if they are to produce more food for global security. Directed mutagenesis makes use of localized sequence diversification of the gene sequence to produce gene variants with desired characteristics. Using CRISPR-Cas dependent, targeted mutagenesis has recently been utilized to obtain synthetic evolution in a variety of plant species. The breadth of beneficial traits in crop species can be expanded and identified through the use of directed mutagenesis. This article focuses on efficient genome editing approaches for directed mutagenesis of plant genes with agronomic importance using the guide RNA library of CRISPR. Potential applications of cutting-edge CRISPR-Cas base editing and prime editing to introduce efficient site-directed mutation in plants are discussed. This strategy has shown considerable promise in aiding trait engineering, guided evolution, and genetic screening. Though this technology is still in its early stages, it offers a comprehensive evaluation of the existing strategies and new delivery techniques for CRISPR screens. It is possible to create superior varieties with higher yields, better nutrient content, and broad environmental tolerance with potential prospects of CRISPR screens in plants. [ABSTRACT FROM AUTHOR]

Base editors (BEs) consist of partially active Cas9 homologs fused to nucleobase-converting DNA deaminases along with certain accessory proteins. The effectiveness of BE tools depends on the enzymatic efficiency of deaminases and the availability of protospacer adjacent motif (PAM) necessary for functioning of Cas enzyme. Furthermore, the target nucleotides must be situated within the editing window (EW) at the targeted genetic loci. In addition to SpCas9, which recognizes NGG PAM, there are various SpCas9 variants and orthologs recently characterized to recognize non-NGG PAMs or exhibit broader EW lengths when used in BEs. These Cas9 homologs have shown promise for BE tool development in plant and mammalian genome editing (GE). In this study, we engineered C-to-T modifying cytosine (CBE) and A-to-G modifying adenine (ABE) modules using SpCas9 variants for bacterial GE. These variants utilize circularly permuted SpCas9 (CP-Cas9) with extended EW lengths. Furthermore, BEs constructed by replacing SpCas9 nickase (nSpCas9) with the SaCas9 variant (nSaKKHCas9), which is compatible with NNNRRT PAM, expanded the targetable sites beyond the NGG PAM requirement. The SaCas9-based BE tool was successfully employed to evolve the rpoB gene, imparting antibiotic (rifampicin) resistance, highlighting the expanded potential of engineered BEs for bacterial GE applications. [ABSTRACT FROM AUTHOR]

2-acetyl-1-pyrroline (2AP) is a highly effective volatile compound that gives fragrance to numerous plant species and food. Mutation(s) in the betaine aldehyde dehydrogenase 2 (BADH2) gene results in the accumulation of 2AP. However, the function of BADH genes in tobacco (Nicotiana tabacum L.) remains poorly understood. In this study, we successfully obtained four betaine aldehyde dehydrogenase (BADH) genes from tobacco. Phylogenetic analysis of the protein sequences showed that two of the four BADH genes were closely related to the wolfberry (Lycium barbarum) BADH gene (LbBADH1), so we named them NtBADH1a and NtBADH1b, respectively. The other two BADH genes were orthologues of the tomato (Solanum lycopersicum) aminoaldehyde dehydrogenase 2 (SlAMADH2) gene, and were named NtBADH2a and NtBADH2b, respectively. Expression analysis revealed that the biological functions of NtBADH1a and NtBADH1b were different from those of genes NtBADH2a and NtBADH2b. We introduced mutations into NtBADH1a, NtBADH1b, NtBADH2a and NtBADH2b in tobacco using the CRISPR/Cas9 system and identified transgenic Ntbadh mutant tobacco lines. Single mutants (Ntbadh1a, Ntbadh1b, Ntbadh2a and Ntbadh2b) and double mutants (Ntbadh1a-Ntbadh1b and Ntbadh2a-Ntbadh2b) harbored deletion or insertion of nucleotides, both of which led to the production of a frameshift, preventing protein accumulation. A popcorn-like scent was noticeable in tobacco leaves from the Ntbadh2a-Ntbadh2b double mutant, but not from any single mutant or the Ntbadh1a-Ntbadh1b double mutant or the wild type. Consistent with this observation, we only detected 2AP in fresh leaves from the Ntbadh2a-Ntbadh2b double mutant. These findings indicate that only the combined inactivation of NtBADH2a and NtBADH2b results in 2AP accumulation in tobacco, which was not related to NtBADH1. [ABSTRACT FROM AUTHOR]

Polyploidy is common among grasses (Poaceae) and poses challenges for conventional breeding. Genome editing technology circumvents crossing and selfing, enabling targeted modifications to multiple gene copies in a single generation while maintaining the heterozygous context of many polyploid genomes. Bahiagrass (Paspalum notatum Flüggé; 2n=4x=40) is an apomictic, tetraploid C4 species that is widely grown in the southeastern United States as forage in beef cattle production and utility turf. The chlorophyll biosynthesis gene magnesium chelatase (MgCh) was selected as a rapid readout target for establishing genome editing in tetraploid bahiagrass. Vectors containing sgRNAs, Cas9 and nptII were delivered to callus cultures by biolistics. Edited plants were characterized through PCR-based assays and DNA sequencing, and mutagenesis frequencies as high as 99% of Illumina reads were observed. Sequencing of wild type (WT) bahiagrass revealed a high level of sequence variation in MgCh likely due to the presence of at least two copies with possibly eight different alleles, including pseudogenes. MgCh mutants exhibited visible chlorophyll depletion with up to 82% reductions in leaf greenness. Two lines displayed progression of editing over time which was linked to somatic editing. Apomictic progeny of a chimeric MgCh editing event were obtained and allowed identification of uniformly edited progeny plants among a range of chlorophyll depletion phenotypes. Sanger sequencing of a highly edited mutant revealed elevated frequency of a WT allele, probably due to frequent homology-directed repair (HDR). To our knowledge these experiments comprise the first report of genome editing applied in perennial, warm-season turf or forage grasses. This technology will accelerate bahiagrass cultivar development. [ABSTRACT FROM AUTHOR]

Polyploidy is common among grasses (Poaceae) and poses challenges for conventional breeding. Genome editing technology circumvents crossing and selfing, enabling targeted modifications to multiple gene copies in a single generation while maintaining the heterozygous context of many polyploid genomes. Bahiagrass (Paspalum notatum Flüggé; 2n=4x=40) is an apomictic, tetraploid C4 species that is widely grown in the southeastern United States as forage in beef cattle production and utility turf. The chlorophyll biosynthesis gene magnesium chelatase (MgCh) was selected as a rapid readout target for establishing genome editing in tetraploid bahiagrass. Vectors containing sgRNAs, Cas9 and nptII were delivered to callus cultures by biolistics. Edited plants were characterized through PCR-based assays and DNA sequencing, and mutagenesis frequencies as high as 99% of Illumina reads were observed. Sequencing of wild type (WT) bahiagrass revealed a high level of sequence variation in MgCh likely due to the presence of at least two copies with possibly eight different alleles, including pseudogenes. MgCh mutants exhibited visible chlorophyll depletion with up to 82% reductions in leaf greenness. Two lines displayed progression of editing over time which was linked to somatic editing. Apomictic progeny of a chimeric MgCh editing event were obtained and allowed identification of uniformly edited progeny plants among a range of chlorophyll depletion phenotypes. Sanger sequencing of a highly edited mutant revealed elevated frequency of a WT allele, probably due to frequent homology-directed repair (HDR). To our knowledge these experiments comprise the first report of genome editing applied in perennial, warm-season turf or forage grasses. This technology will accelerate bahiagrass cultivar development.

Plant surface properties are crucial determinants of resilience to abiotic and biotic stresses. The outer layer of the plant cuticle consists of chemically diverse epicuticular waxes. The WAX INDUCER1/SHINE subfamily of APETALA2/ETHYLENE RESPONSIVE FACTORS regulates cuticle properties in plants. In this study, four barley genes homologous to the Arabidopsis thaliana AtWIN1 gene were mutated using RNA-guided Cas9 endonuclease. Mutations in one of them, the HvWIN1 gene, caused a recessive glossy sheath phenotype associated with β-diketone deficiency. A complementation test for win1 knockout (KO) and cer-x mutants showed that Cer-X and WIN1 are allelic variants of the same genomic locus. A comparison of the transcriptome from leaf sheaths of win1 KO and wild-type plants revealed a specific and strong downregulation of a large gene cluster residing at the previously known Cer-cqu locus. Our findings allowed us to postulate that the WIN1 transcription factor in barley is a master mediator of the β-diketone biosynthesis pathway acting through developmental stage- and organ-specific transactivation of the Cer-cqu gene cluster. [ABSTRACT FROM AUTHOR]

The advent of high-throughput omic technologies has caused unprecedented progress in research on bacteriophages, the most abundant and still the least explored entities on earth. Despite the growing number of phage genomes sequenced and the rejuvenation of interest in phage therapy, the progress in the functional analysis of phage genes is slow. Simple and efficient techniques of phage genome targeted mutagenesis that would allow one to knock out particular genes precisely without polar effects in order to study the effect of these knock-outs on phage functions are lacking. Even in the case of model phages, the functions of approximately half of their genes are unknown. P1 is an enterobacterial temperate myophage of clinical significance, which lysogenizes cells as a plasmid. It has a long history of studies, serves as a model in basic research, is a gene transfer vector, and is a source of genetic tools. Its gene products have structural homologs in several other phages. In this perspective article, we describe a simple and efficient procedure of traceless P1 genome modification that could also serve to acquire targeted mutations in the genomes of certain other temperate phages and speed up functional annotations of phage genes. [ABSTRACT FROM AUTHOR]

Penicillin G acylase (PGA) serves as a critical biocatalyst for the hydrolysis of penicillin G, yielding 6-aminopenicillanic acid, a vital precursor for β-lactam semi-synthetic antibiotics. The catalytic efficiency of PGA, however, remains suboptimal in native Escherichia coli strains. To improve this, E. coli BL21 was engineered as a microbial cell factory via heterologous expression and site-directed mutagenesis to enhance PGA activity. The heterologous pga gene from Providencia rettgeri was integrated into E. coli BL21 (DE3) for the biosynthesis of PGA, achieving a PGA activity of 253 ± 2 U/mL after 16 hours of fermentation. The N167 site underwent mutation, producing the sites N167A and N167I. Plasmids carrying these mutations were introduced into E. coli BL21(DE3), and the enzymatic activities were recorded as 293 ± 3 U/mL for the N167A mutant and 238 ± 2 U/mL for the N167I mutant. This study not only introduces a novel approach to enhancing PGA activity but also illustrates the potential for catalytic optimization through targeted modifications of the enzyme's active site. • Penicillin G acylase (PGA) from the strain BL21-pga exhibits high enzyme activity. • Validation of pga gene expression in E. coli BL21(DE3) from multiple levels. • Molecular simulations of PGA were docked to analyse sites of action of this enzyme. • Point mutation of the PGA active site to further enhance the PGA enzyme activity. • Enzyme activity changes in relation to enzyme active site and substrate affinity. [ABSTRACT FROM AUTHOR]

Cas9 derived from Streptococcus pyogenes (SpCas9) is used widely in genome editing using the CRISPR-Cas system due to its high activity, but is a relatively large molecule (1,368 amino acid (a.a.) residues). Recently, targeted mutagenesis in human cells and maize using Cas12f derived from Syntrophomonas palmitatica (SpCas12f)—a very small Cas of 497 a.a, which is a more suitable size for virus vectors—was reported. However, there are no reports of genome editing using SpCas12f in crops other than maize. In this study, we applied SpCas12f to genome editing in rice—one of the most important staple crops in the world. An expression vector encoding rice codon-optimized SpCas12f and sgRNA for OsTubulin as a target was introduced into rice calli by Agrobacterium-mediated transformation. Molecular analysis of SpCas12f-transformed calli showed that mutations were introduced successfully into the target region. Detailed analysis by amplicon sequencing revealed estimated mutation frequencies (a ratio of the number of mutated calli to that of SpCas12f-transformed calli) of 28.8% and 55.6% in two targets. Most mutation patterns were deletions, but base substitutions and insertions were also confirmed at low frequency. Moreover, off-target mutations by SpCas12f were not found. Furthermore, mutant plants were regenerated successfully from the mutated calli. It was confirmed that the mutations in the regenerated plants were inherited to the next-generation. In the previous report in maize, mutations were introduced by treatment with heat shock at 45°C for 4 h per day for 3 days; no mutations were introduced under normal growth conditions at 28°C. Surprisingly, however, mutations can be introduced without heat-shock treatment in rice. This might be due to the culture conditions, with relatively higher temperature (30°C or higher) and constant light during callus proliferation. Taken together, we demonstrated that SpCas12f can be used to achieve targeted mutagenesis in rice. SpCas12f is thus a useful tool for genome editing in rice and is suitable for virus vector-mediated genome editing due to its very small size.

The advent of high-throughput omic technologies has caused unprecedented progress in research on bacteriophages, the most abundant and still the least explored entities on earth. Despite the growing number of phage genomes sequenced and the rejuvenation of interest in phage therapy, the progress in the functional analysis of phage genes is slow. Simple and efficient techniques of phage genome targeted mutagenesis that would allow one to knock out particular genes precisely without polar effects in order to study the effect of these knock-outs on phage functions are lacking. Even in the case of model phages, the functions of approximately half of their genes are unknown. P1 is an enterobacterial temperate myophage of clinical significance, which lysogenizes cells as a plasmid. It has a long history of studies, serves as a model in basic research, is a gene transfer vector, and is a source of genetic tools. Its gene products have structural homologs in several other phages. In this perspective article, we describe a simple and efficient procedure of traceless P1 genome modification that could also serve to acquire targeted mutations in the genomes of certain other temperate phages and speed up functional annotations of phage genes.

CRISPR/Cas9 is a transformative tool for making targeted genetic alterations. In plants, high mutation efficiencies have been reported in primary transformants. However, many of the mutations analyzed were somatic and therefore not heritable. To provide more insights into the efficiency of creating stable homozygous mutants using CRISPR/Cas9, we targeted LsNCED4 (9-cis-EPOXYCAROTENOID DIOXYGENASE4), a gene conditioning thermoinhibition of seed germination in lettuce. Three constructs, each capable of expressing Cas9 and a single gRNA targeting different sites in LsNCED4, were stably transformed into lettuce (Lactuca sativa) cvs. Salinas and Cobham Green. Analysis of 47 primary transformants (T1) and 368 T2 plants by deep amplicon sequencing revealed that 57% of T1 plants contained events at the target site: 28% of plants had germline mutations in one allele indicative of an early editing event (mono-allelic), 8% of plants had germline mutations in both alleles indicative of two early editing events (bi-allelic), and the remaining 21% of plants had multiple low frequency mutations indicative of late events (chimeric plants). Editing efficiency was similar in both genotypes, while the different gRNAs varied in efficiency. Amplicon sequencing of 20 T1 and more than 100 T2 plants for each of the three gRNAs showed that repair outcomes were not random, but reproducible and characteristic for each gRNA. Knockouts of NCED4 resulted in large increases in the maximum temperature for seed germination, with seeds of both cultivars capable of germinating >70% at 37°. Knockouts of NCED4 provide a whole-plant selectable phenotype that has minimal pleiotropic consequences. Targeting NCED4 in a co-editing strategy could therefore be used to enrich for germline-edited events simply by germinating seeds at high temperature.

Base editing by CRISPR crucially depends on the presence of a protospacer adjacent motif (PAM) at the correct distance from the editing site. Here, we present and validate an efficient one-shot approach termed 'inception' that expands the editing range. This is achieved by sequential, combinatorial base editing: de novo generated synonymous, non-synonymous or intronic PAM sites facilitate subsequent base editing at nucleotide positions that were initially inaccessible, further opening the targeting range of highly precise editing approaches. We demonstrate the applicability of the inception concept in medaka (Oryzias latipes) in three settings: loss of function, by introducing a pre-termination STOP codon in the open reading frame of oca2; locally confined multi-codon changes to generate allelic variants with different phenotypic severity in kcnh6a; and the removal of a splice acceptor site by targeting intronic sequences of rx3. Using sequentially acting base editors in the described combinatorial approach expands the number of accessible target sites by 65% on average. This allows the use of wellestablished tools with NGG PAM recognition for the establishment of thus far unreachable disease models, for hypomorphic allele studies and for efficient targeted mechanistic investigations in a precise and predictable manner. [ABSTRACT FROM AUTHOR]

The importance of visual stimuli in a given behavior is often different, even between closely related species. Species of the genus Drosophila have been categorized into three classes according to their reproductive dependency on vision. Class I and II species reproduce in the darkness, whereas class III species never reproduce without vision. Therefore, in class III species, mutants at the white locus that are deprived of normal visual function are not able to be established as homozygous stocks. Drosophila prolongata is a species with a conspicuous body color pattern, suggesting that an increased importance of visual stimuli underlies the evolution of this species. In this study, to examine the behavioral dependency on visual stimuli in D. prolongata, we generated white gene‐knockout (w−) mutants using the CRISPR/Cas9 system and examined their mating and fighting behaviors in light and dark conditions. The courtship and fighting activities of w− males were extremely reduced regardless of the light condition. Furthermore, wildtype males did not perform any courtship or fighting behaviors in dark conditions. Our results showed that D. prolongata is a class III species that strongly relies on visual stimuli in both behaviors. [ABSTRACT FROM AUTHOR]

This work optimized proteoglycan-degrading enzymes through targeted mutagenesis to enhance their interaction with the tumor microenvironment in Renal Cell Carcinoma (RCC). A comprehensive mutagenesis approach identified 60 key mutations significantly improving enzymatic activity, stability, and structural integrity. When compared to Wild Type (WT) enzyme, a remarkable increase in specific activity by 35 % (p < 0.001) and a considerable decrease in the Km values for hyaluronidases from 2.5 mM to 1.5 mM (p < 0.05), as a result of these modifications. Computational methods are then employed to analyze the active site of the enzymes to detect potential residues that may alter. These computational techniques include molecular docking and protein structure prediction. The structural models of the enzymes are created by utilizing homology modeling and crystallography. These models demonstrate the spatial arrangement of the amino acid enzymes. It also illustrated the specific mutations to improve the potential of enzymes to relate to the Extracellular Matrix (ECM) of tumors. The computational screening methods effectively predicted how the modifications impact enzyme catalytic efficiency and stability. The modified enzymes retained 85 % of the enzyme activity, while the WT retained 60 %. Thus, the modified enzymes demonstrated better thermal stability than WT. Vitro test analyses show that the proteoglycan breakdown was significantly reduced by 70 % (p < 0.001), and for effective proteoglycan breakdown, hyaluronidase concentration is needed. This work proposed a novel therapeutic approach called proteoglycan-degrading enzymes for the treatment of RCC. These proteoglycan-degrading enzymes are more stable and effective for treating RCC, as demonstrated in the outcomes. Customized proteoglycan-degrading enzymes make the therapy more effective. The effective breakdown of the tumor's ECM in RCC models establishes this customized proteoglycan-degrading enzyme. These enzymes are effective for this customized cancer treatment as they improve stability, activity, and interaction with the TME., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2025. Published by Elsevier B.V.)

Clustered regularly interspaced short palindromic repeats (CRISPR) and CRISPR-associated proteins (Cas) (CRISPR-Cas) is an adaptive prokaryote immune system against foreign DNA/RNA that is now applied widely to genome editing. A miniature Cas, CRISPR-Cas12f, is one-half to one-third the size of the CRISPR-Cas9 that is commonly used in genome editing experiments in many organisms, including higher plants. The compactness of CRISPR-Cas12f is expected to be advantageous in terms of vector construction and transformation frequency. Moreover, CRISPR-Cas12f can be useful for virus vector-mediated genome editing because the size of the transgene is the major restriction in the use of virus vectors. Here, we describe our protocol for targeted mutagenesis using Cas12f derived from Syntrophomonas palmitatica (SpCas12f) via Agrobacterium-mediated transformation in rice. We also summarize some approaches to improve the frequency of targeted mutagenesis using SpCas12f., (© 2025. The Author(s), under exclusive license to Springer Science+Business Media, LLC, part of Springer Nature.)

Targeted mutagenesis via programmable nucleases including the clustered regulatory interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein 9 (Cas9) (CRISPR/Cas9) system has been broadly utilized to generate genome-edited organisms including flowering plants. To date, specific expression of Cas9 protein and guide RNA (gRNA) in reproductive cells or tissues is considered one of the most effective genome-editing approaches for heritable targeted mutagenesis. In this report, we review recent advances in genome editing methods for reproductive cells or tissues, which have roles in transmitting genetic material to the next-generation, such as egg cells, pollen grains, zygotes, immature zygotic embryos, and shoot apical meristems (SAMs). Specific expression of Cas9 proteins in initiating cells efficiently induces targeted mutagenesis viaAgrobacterium-mediated in planta transformation. In addition, genome editing by direct delivery of CRISPR/Cas9 components into pollen grains, zygotes, cells of embryos and SAMs has been successfully established to generate genome-edited plant lines. Notably, DNA-free genome editing by the delivery of Cas9-gRNA ribonucleoproteins (RNPs) is not associated with any legislative concerns about genetically modified organisms. In summary, the genome editing methods for reproductive cells or tissues have enormous potential for not only basic studies for plant reproduction but also applied sciences toward molecular plant breeding.

Introduction: Despite its rapid worldwide adoption as an efficient mutagenesis tool, plant genome editing remains a labor-intensive process requiring often several months of in vitro culture to obtain mutant plantlets. To avoid a waste in time and money and to test, in only a few days, the efficiency of molecular constructs or novel Cas9 variants (clustered regularly interspaced short palindromic repeats (CRISPR)-associated protein 9) prior to stable transformation, rapid analysis tools are helpful. Methods: To this end, a streamlined maize protoplast system for transient expression of CRISPR/Cas9 tools coupled to NGS (next generation sequencing) analysis and a novel bioinformatics pipeline was established. Results and discussion: Mutation types found with high frequency in maize leaf protoplasts had a trend to be the ones observed after stable transformation of immature maize embryos. The protoplast system also allowed to conclude that modifications of the sgRNA (single guide RNA) scaffold leave little room for improvement, that relaxed PAM (protospacer adjacent motif) sites increase the choice of target sites for genome editing, albeit with decreased frequency, and that efficient base editing in maize could be achieved for certain but not all target sites. Phenotypic analysis of base edited mutant maize plants demonstrated that the introduction of a stop codon but not the mutation of a serine predicted to be phosphorylated in the bHLH (basic helix loop helix) transcription factor ZmICEa (INDUCER OF CBF EXPRESSIONa) caused abnormal stomata, pale leaves and eventual plant death two months after sowing. [ABSTRACT FROM AUTHOR]

Cassava is the world's most essential food root crop, generating calories to millions of Sub-Saharan African subsistence farmers. Cassava leaves and roots contain toxic quantities of the cyanogenic glycoside linamarin. Consumption of residual cyanogens results in cyanide poisoning due to conversion of the cyanogens to cyanide in the body. There is a need for acyanogenic cassava cultivars in order for it to become a consistently safe and acceptable food, and commercial crop. In recent years, the CRISPR/Cas system, has proven to be the most effective and successful genome editing tool for gene function studies and crop improvement. In this study, we performed targeted mutagenesis of the MeCYP79D1 gene in exon 3, using CRISPR/Cas9, via Agrobacterium-mediated transformation. The vector design resulted in knockout in cotyledon-stage somatic embryos regenerated under hygromycin selection. Eight plants were recovered and genotyped. DNA sequencing analysis revealed that the tested putative transgenic plants carried mutations within the MeCYP79D1 locus, with deletions and substitutions being reported upstream and downstream of the PAM sequence, respectively. The levels of linamarin and evolved cyanide present in the leaves of mecyp79d1 lines were reduced up to seven-fold. Nevertheless, the cassava linamarin and cyanide were not completely eliminated by the MeCYP79D1 knockout. Our results indicate that CRISPR/Cas9-mediated mutagenesis is as an alternative approach for development of cassava plants with lowered cyanide content. [ABSTRACT FROM AUTHOR]

EFSA was asked by the european Commission to develop criteria as advice for consideration for the risk assessment of plants produced by targeted mutagenesis, cisgenesis and intragenesis. EFSA proposes in this statement six main criteria to assist the risk assessment of these plants. The first four criteria are related to the molecular characterisation of the genetic modification introduced in the recipient plant. The four criteria evaluate whether any exogenous DNA sequence(s) is/are present (Criterion 1), whether such sequence derives from the breeders' gene pool (Criterion 2), the type of integration (Criterion 3) and whether any endogenous plant gene is interrupted (Criterion 4). Depending on the evaluation of the above criteria, the product can be a genome edited plant where no exogenous DNA sequence is present, or a cisgenic or intragenic plant where the cisgenic and intragenic sequence are introduced by targeted insertion and no plant endogenous genes are interrupted. In these cases, two more criteria are assessed to evaluate the history of safe use (Criterion 5) and the structure and function of the new allele (Criterion 6). If cisgenic and intragenic sequence are introduced by random integration without interruption of an endogenous gene, or when no risk is identified when an endogenous gene is interrupted, the criteria 5 and 6 will also be assessed. Evaluating the history of safe use is an important part of the proportionate risk assessment of cisgenic, intragenic and genome‐edited plants since the newly introduced allele may already be present in nature. However, when the history of safe use cannot be sufficiently demonstrated, the function and structure of the introduced allele should be carefully assessed. Recommendations are also included on the aspects that need further elaboration for full applicability of the criteria proposed herein are also included. This publication is linked to the following EFSA Journal article: http://onlinelibrary.wiley.com/doi/10.2903/j.efsa.2022.7621/full [ABSTRACT FROM AUTHOR]

Recent breeding efforts in Brassica have focused on the development of new oilseed feedstock crop for biofuels (e.g., ethanol, biodiesel, bio-jet fuel), bio-industrial uses (e.g., bio-plastics, lubricants), specialty fatty acids (e.g., erucic acid), and producing low glucosinolates levels for oilseed and feed meal production for animal consumption. We identified a novel opportunity to enhance the availability of nutritious, fresh leafy greens for human consumption. Here, we demonstrated the efficacy of disarming the 'mustard bomb' reaction in reducing pungency upon the mastication of fresh tissue—a major source of unpleasant flavor and/or odor in leafy Brassica. Using gene-specific mutagenesis via CRISPR-Cas12a, we created knockouts of all functional copies of the type-I myrosinase multigene family in tetraploid Brassica juncea. Our greenhouse and field trials demonstrate, via sensory and biochemical analyses, a stable reduction in pungency in edited plants across multiple environments. Collectively, these efforts provide a compelling path toward boosting the human consumption of nutrient-dense, fresh, leafy green vegetables. [ABSTRACT FROM AUTHOR]

CRISPR/Cas9 has emerged as a simple, yet efficient gene editing tool to generate targeted mutations in desired genes in crops plants. Agrobacterium tumefaciens, a reliable and inexpensive DNA-delivery mechanism into plant cells, has been used for the generation of CRISPR/Cas9-mediated mutations in crop plants, including potato. However, little information is available as to the progression of gene knockout during various stages of culture following the introduction of CRISPR components in this species. In the current study, the green fluorescent protein (gfp) transgene was first introduced in the genome of a potato variety, Yukon Gold. Two GFP-expressing lines, one with a single gfp copy integrated and another with four gfp copies integrated, were subjected to CRISPR/Cas9-mediated mutations in the transgene(s) using three different gRNAs. Disappearance of GFP fluorescence was monitored during the entire culture/regeneration process. Although all three gRNAs successfully knocked out the transgene(s), their efficiencies differed greatly and did not completely match the predicted scores by some guide RNA prediction tools. The nature of mutations in various knockout events was analyzed. Several lines containing four gfp-copies showed four different types of mutations. These findings suggest that it is possible to target all four alleles of a desired native gene in the tetraploid potato. Key message: Potato lines, with a single or four copies of the gfp transgene integrated, were subjected to CRISPR/Cas9-mediated mutations. The results indicated that it should be possible to target and knock out multiple copies of a native gene in the tetraploid genotypes of this crop. [ABSTRACT FROM AUTHOR]

IntroductionDespite its rapid worldwide adoption as an efficient mutagenesis tool, plant genome editing remains a labor-intensive process requiring often several months of in vitro culture to obtain mutant plantlets. To avoid a waste in time and money and to test, in only a few days, the efficiency of molecular constructs or novel Cas9 variants (clustered regularly interspaced short palindromic repeats (CRISPR)-associated protein 9) prior to stable transformation, rapid analysis tools are helpful.MethodsTo this end, a streamlined maize protoplast system for transient expression of CRISPR/Cas9 tools coupled to NGS (next generation sequencing) analysis and a novel bioinformatics pipeline was established.Results and discussionMutation types found with high frequency in maize leaf protoplasts had a trend to be the ones observed after stable transformation of immature maize embryos. The protoplast system also allowed to conclude that modifications of the sgRNA (single guide RNA) scaffold leave little room for improvement, that relaxed PAM (protospacer adjacent motif) sites increase the choice of target sites for genome editing, albeit with decreased frequency, and that efficient base editing in maize could be achieved for certain but not all target sites. Phenotypic analysis of base edited mutant maize plants demonstrated that the introduction of a stop codon but not the mutation of a serine predicted to be phosphorylated in the bHLH (basic helix loop helix) transcription factor ZmICEa (INDUCER OF CBF EXPRESSIONa) caused abnormal stomata, pale leaves and eventual plant death two months after sowing.

Cassava is the world’s most essential food root crop, generating calories to millions of Sub-Saharan African subsistence farmers. Cassava leaves and roots contain toxic quantities of the cyanogenic glycoside linamarin. Consumption of residual cyanogens results in cyanide poisoning due to conversion of the cyanogens to cyanide in the body. There is a need for acyanogenic cassava cultivars in order for it to become a consistently safe and acceptable food, and commercial crop. In recent years, the CRISPR/Cas system, has proven to be the most effective and successful genome editing tool for gene function studies and crop improvement. In this study, we performed targeted mutagenesis of the MeCYP79D1 gene in exon 3, using CRISPR/Cas9, via Agrobacterium-mediated transformation. The vector design resulted in knockout in cotyledon-stage somatic embryos regenerated under hygromycin selection. Eight plants were recovered and genotyped. DNA sequencing analysis revealed that the tested putative transgenic plants carried mutations within the MeCYP79D1 locus, with deletions and substitutions being reported upstream and downstream of the PAM sequence, respectively. The levels of linamarin and evolved cyanide present in the leaves of mecyp79d1 lines were reduced up to seven-fold. Nevertheless, the cassava linamarin and cyanide were not completely eliminated by the MeCYP79D1 knockout. Our results indicate that CRISPR/Cas9-mediated mutagenesis is as an alternative approach for development of cassava plants with lowered cyanide content.

Genome targeting with CRISPR/Cas9 is a popular method for introducing mutations and creating knock-out effects. However, limited information is currently available on the mutagenesis of essential genes. This study investigated the efficiency of CRISPR/Cas9 in targeting rice essential genes: the singleton TARGET OF RAPAMYCIN (OsTOR) and the three paralogs of the Sucrose non-fermenting-1 (SNF1)-related kinase 1 (OsSnRK1α), OsSnRK1αA, OsSnRK1αB and OsSnRK1αC. Strong activity of constitutively expressed CRISPR/Cas9 was effective in creating mutations in OsTOR and OsSnRK1α genes, but inducible CRISPR/Cas9 failed to generate detectable mutations. The rate of OsTOR mutagenesis was relatively lower and only the kinase domain of OsTOR could be targeted, while mutations in the HEAT region were unrecoverable. OsSnRK1α paralogs could be targeted at higher rates; however, sterility or early senescence was observed in >50% of the primary mutants. Additionally, OsSnRK1αB and OsSnRK1αC, which bear high sequence homologies, could be targeted simultaneously to generate double-mutants. Further, although limited types of mutations were found in the surviving mutants, the recovered lines displayed loss-of-function or knockdown tor or snrk1 phenotypes. Overall, our data show that mutations in these essential genes can be created by CRISPR/Cas9 to facilitate investigations on their roles in plant development and environmental response in rice. [ABSTRACT FROM AUTHOR]

CRISPR/Cas9 is a powerful genome editing tool in many organisms, including a number of monocots and dicots. Although the design and application of CRISPR/Cas9 is simpler compared to other nuclease-based genome editing tools, optimization requires the consideration of the DNA delivery and tissue regeneration methods for a particular species to achieve accuracy and efficiency. Here, we describe a public sector system, ISU Maize CRISPR, utilizing Agrobacterium-delivered CRISPR/Cas9 for high-frequency targeted mutagenesis in maize. This system consists of an Escherichia coli cloning vector and an Agrobacterium binary vector. It can be used to clone up to four guide RNAs for single or multiplex gene targeting. We evaluated this system for its mutagenesis frequency and heritability using four maize genes in two duplicated pairs: Argonaute 18 (ZmAgo18a and ZmAgo18b) and dihydroflavonol 4-reductase or anthocyaninless genes (a1 and a4). T0 transgenic events carrying mono- or diallelic mutations of one locus and various combinations of allelic mutations of two loci occurred at rates over 70% mutants per transgenic events in both Hi-II and B104 genotypes. Through genetic segregation, null segregants carrying only the desired mutant alleles without the CRISPR transgene could be generated in T1 progeny. Inheritance of an active CRISPR/Cas9 transgene leads to additional target-specific mutations in subsequent generations. Duplex infection of immature embryos by mixing two individual Agrobacterium strains harbouring different Cas9/gRNA modules can be performed for improved cost efficiency. Together, the findings demonstrate that the ISU Maize CRISPR platform is an effective and robust tool to targeted mutagenesis in maize.

Abstract Background Various databases on genetically modified organisms (GMOs) exist, all with their specific focus to facilitate access to information needed for, e. g., the assistance in risk assessment, the development of detection and identification strategies or inspection and control activities. Each database has its unique approach towards the subject. Often these databases use different terminology to describe the GMOs. For adequate GMO addressing and identification and exchange of GMO-related information it is necessary to use commonly agreed upon concepts and terminology. Result A hierarchically structured controlled vocabulary describing the genetic elements inserted into conventional GMOs, and GMOs developed by the use of gen(om)e-editing is presented: the GMO genetic element thesaurus (GMO-GET). GMO-GET can be used for GMO-related documentation, including GMO-related databases. It has initially been developed on the basis of two GMO databases, i.e. the Biosafety Clearing-House and the EUginius database. Conclusion The use of GMO-GET will enable consistent and compatible information (harmonisation), also allowing an accurate exchange of information between the different data systems and thereby facilitating their interoperability. GMO-GET can also be used to describe genetic elements that are altered in organisms obtained through current targeted genome-editing techniques.