Search

Xiaolin Zhang,1,2,* Jiankang Song,3,* Alexey Klymov,3,* Yang Zhang,3 Leonie de Boer,1 John A Jansen,3 Jeroen JJP van den Beucken,3 Fang Yang,3 Sebastian AJ Zaat,1,* Sander CG Leeuwenburgh3,* 1Department of Medical Microbiology, Amsterdam Infection and Immunity Institute, Academic Medical Center, University of Amsterdam, Amsterdam, the Netherlands; 2Department of Biomaterials Science and Technology, MIRA Institute for Biomedical Technology and Technical Medicine, University of Twente, Enschede, the Netherlands; 3Department of Biomaterials, Radboud University Medical Centre, Nijmegen, the Netherlands *These authors contributed equally to this work Background: Infections such as biomaterial-associated infection and osteomyelitis are often associated with intracellular survival of bacteria (eg, Staphylococcus aureus). Treatment of these infections remains a major challenge due to the low intracellular efficacy of many antibiotics. Therefore, local delivery systems are urgently required to improve the therapeutic efficacy of antibiotics by enabling their intracellular delivery. Purpose: To assess the potential of gelatin nanospheres as carriers for local delivery of vancomycin into macrophages of zebrafish larvae in vivo and into THP-1-derived macrophages in vitro using fluorescence microscopy. Materials and methods: Fluorescently labeled gelatin nanospheres were prepared and injected into transgenic zebrafish larvae with fluorescent macrophages. Both the biodistribution of gelatin nanospheres in zebrafish larvae and the co-localization of vancomycin-loaded gelatin nanospheres with zebrafish macrophages in vivo and uptake by THP-1-derived macrophages in vitro were studied. In addition, the effect of treatment with vancomycin-loaded gelatin nanospheres on survival of S. aureus-infected zebrafish larvae was investigated. Results: Internalization of vancomycin-loaded gelatin nanospheres by macrophages was observed qualitatively both in vivo and in vitro. Systemically delivered vancomycin, on the other hand, was hardly internalized by macrophages without the use of gelatin nanospheres. Treatment with a single dose of vancomycin-loaded gelatin nanospheres delayed the mortality of S. aureus-infected zebrafish larvae, indicating the improved therapeutic efficacy of vancomycin against (intracellular) S. aureus infection in vivo. Conclusion: The present study demonstrates that gelatin nanospheres can be used to facilitate local and intracellular delivery of vancomycin. Keywords: in vivo real-time monitoring, fluorescence microscopy, biodistribution, cell-material interaction, Staphylococcus aureus, intracellular infection

Peri-implantitis is an inflammatory condition caused by bacterial biofilms adhered on dental implant surfaces that cause progressive tissue destruction from the host's inflammatory response. The adverse effects of peri-implantitis progression can go beyond just losing the implant. This highlights the importance of implementing strategies to stabilize disease in the short term. Layer-by-layer (LbL) assembly is a promising avenue in the field of peri-implantitis management due to its applicability with a variety of substances, in addition to being an easy, versatile, and flexible process for multilayer formation to act directly in the affected site. In this Review, our objective is to offer comprehensive chemical and biological insights into the LbL system, clarifying its specific application as antimicrobial coatings, with concern for the physical site and purpose. Additionally, we delve deeper into the concepts of onset and progression of peri-implantitis, aiming to elucidate the precise indications for employing the LbL system as a coating for implant abutments in peri-implantitis treatment. Finally, we correlate the chemical composition of the LbL system with its functionality while also addressing the challenges posed by the uncontrolled environment of the oral cavity, which ultimately restricts its clinical applicability.

Background: Soft tissue integration (STI) around dental implant abutments is a prerequisite to prevent bacterial invasion and achieve successful dental implant rehabilitation. However, peri-implant STI is a major challenge after dental abutment placement due to alterations in the immune microenvironment upon surgical dental implant installation., Methods: Based on known immunomodulatory effects of zinc, we herein deposited zinc/chitosan/gelatin (Zn/CS/Gel) coatings onto titanium substrates to study their effect on macrophages. First, we exposed macrophages to cell culture media containing different zinc ion (Zn 2+ ) concentrations. Next, we explored the immunomodulatory effect of Zn/CS/Gel coatings prepared via facile electrophoretic deposition (EPD)., Results: We found that Zn 2+ effectively altered the secretome by reducing the secretion of pro-inflammatory and enhancing pro-regenerative cytokine secretion, particularly at a Zn 2+ supplementation of approximately 37.5 μM. Zn/CS/Gel coatings released Zn 2+ in a concentration range which effectively stimulated pro-regenerative macrophage polarization as demonstrated by M2 macrophage polarization. Additionally, the impact of these Zn 2+ -exposed macrophages on gingival fibroblasts incubated in conditioned medium showed stimulated adhesion, proliferation, and collagen secretion., Conclusion: Our promising results suggest that controlled release of Zn 2+ from Zn/CS/Gel coatings could be applied to immunomodulate peri-implant STI, and to enhance dental implant survival., Competing Interests: Declarations. Conflict of interest: The authors declare no competing interests. Ethical Approval: There are no animal experiments carried out for this article., (© 2024. The Author(s).)

Calcium phosphate cement (CPC) has evolved as an appealing bone substitute material, especially since CPCs were combined with poly(lactic-co-glycolic acid) (PLGA) porogens to render the resulting CPC/PLGA composite degradable. In view of the multiple variables of CPC and PLGA used previously, the effect of CPC composition and PLGA porogen morphology (i.e., microspheres versus microparticles) on the biological performance of CPC/PLGA has not yet been investigated. Consequently, we here aimed to evaluate comparatively various CPC/PLGA formulations varying in CPC composition and PLGA porogen morphology on their performance in a rabbit femoral condyle bone defect model. CPCs with a composition of 85 wt% α-TCP, 15 wt% dicalcium phosphate anhydrate (DCPA) and 5 wt% precipitated hydroxyapatite (pHA), or 100 wt% α-TCP were combined with spherical or irregularly shaped PLGA porogens (CPC/PLGA ratio of 60:40 wt% for all formulations). All CPC/PLGA formulations were applied via injection in bone defects, as created in the femoral condyle of rabbits, and retrieved for histological evaluation after 6 and 12 weeks of implantation. Descriptive histology and quantitative histomorphometry (i.e., material degradation and new bone formation) were used for analyses. Descriptively, all CPC/PLGA formulations showed material degradation at the periphery of the cement within 6 weeks of implantation. After 12 weeks, bone formation was observed extending into the defect core, replacing the degraded CPC/PLGA material. Quantitatively, similar material degradation (up to 87%) and new bone formation (up to 28%) values were observed, irrespective of compositional variations of CPC/PLGA formulations. These data prove that neither the CPC compositions nor the PLGA porogen morphologies as used in this work affect the biological performance of CPC/PLGA formulations in a rabbit femoral condyle bone defect model., (© 2024 The Author(s). Journal of Biomedical Materials Research Part A published by Wiley Periodicals LLC.)

Implantable biomedical devices have found widespread use in restoring lost functions or structures within the human body, but they face a significant challenge from microbial-related infections, which often lead to implant failure. In this context, antimicrobial hydrogels emerge as a promising strategy for treating implant-associated infections owing to their tunable physicochemical properties. However, the literature lacks a comprehensive analysis of antimicrobial hydrogels, encompassing their development, mechanisms, and effect on implant-associated infections, mainly in light of existing in vitro, in vivo, and clinical evidence. Thus, this review addresses the strategies employed by existing studies to tailor hydrogel properties to meet the specific needs of each application. Furthermore, this comprehensive review critically appraises the development of antimicrobial hydrogels, with a particular focus on solving infections related to metallic orthopedic or dental implants. Then, preclinical and clinical studies centering on providing quantitative microbiological results associated with the application of antimicrobial hydrogels are systematically summarized. Overall, antimicrobial hydrogels benefit from the tunable properties of polymers and hold promise as an effective strategy for the local treatment of implant-associated infections. However, future clinical investigations, grounded on robust evidence from in vitro and preclinical studies, are required to explore and validate new antimicrobial hydrogels for clinical use., (© 2024 Wiley‐VCH GmbH.)

Endochondral bone regeneration is a promising approach in regenerative medicine. Callus mimics (CMs) are engineered and remodeled into bone tissue upon implantation. The long-term objective is to fabricate a sustainable off-the-shelf treatment option for patients. Devitalization was introduced to facilitate storage and using allogeneic (donor) cells would further propel the off-the-shelf approach. However, allogeneic CMs for bone regeneration pose a potential antigenicity concern. Here, we explored the impact of devitalization on antigenicity and osteoinductive bone formation when implanting syngeneic or allogeneic CM in a vital or devitalized state. For this, we implanted chondrogenically differentiated rat-derived mesenchymal stromal cells using an allogeneic immunocompetent ectopic rat model. Vital syngeneic CMs demonstrated the highest bone formation, and vital allogeneic CMs showed the lowest bone formation, while both devitalized CMs showed comparable intermediate levels of bone formation. Preceding bone formation, the level of tartrate-resistant acid phosphatase staining at 7 and 14 days was proportional to the level of eventual bone formation. No differences were observed for local innate immune responses at any time point before or after bone formation. In contrast, allogeneic CMs elicit a mild adaptive immune response, which still permits bone formation in an immunocompetent environment, albeit at a reduced rate compared to the autologous living counterpart. Overall, devitalization delays bone formation when autologous CMs are implanted, whereas it accelerates bone formation in allogeneic CMs, highlighting the potential of this approach for achieving off-the-shelf treatment., (© The Author(s) 2024. Published by Oxford University Press.)

Osteoclasts, the bone resorbing cells of hematopoietic origin formed by macrophage fusion, are essential in bone health and disease. However, in vitro research on osteoclasts remains challenging due to heterogeneous cultures that only contain a few multinucleated osteoclasts. Indeed, a strategy to generate homogeneous populations of multinucleated osteoclasts in a scalable manner has remained elusive. Here, the investigation focuses on whether microencapsulation of human macrophages in microfluidically generated hollow, sacrificial tyramine-conjugated dextran (Dex-TA) microgels could facilitate macrophage precursor aggregation and formation of multinucleated osteoclasts. Therefore, human mononuclear cells are isolated from buffy coats and differentiated toward macrophages. Macrophages are encapsulated in microgels using flow focus microfluidics and outside-in enzymatic oxidative phenolic crosslinking, and differentiated toward osteoclasts. Morphology, viability, and osteoclast fusion of microencapsulated cells are assessed. Furthermore, microgels are degraded to allow cell sorting of released cells based on osteoclastic marker expression. The successful encapsulation and osteoclast formation of human macrophages in Dex-TA microgels are reported for the first time using high-throughput droplet microfluidics. Intriguingly, osteoclast formation within these 3D microenvironments occurs at a significantly higher level compared to the conventional 2D culture system. Furthermore, the feasibility of establishing a pure osteoclast culture from cell transfer and release from degradable microgels is demonstrated., (© 2024 The Author(s). Small published by Wiley‐VCH GmbH.)

Emerging evidence illustrates that osteoclasts (OCs) play diverse roles beyond bone resorption, contributing significantly to bone formation and regeneration. Despite this, OCs remain mysterious cells, with aspects of their lifespan-from origin, fusion, alterations in cellular characteristics, to functions-remaining incompletely understood. Recent studies have identified that embryonic osteoclastogenesis is primarily driven by osteoclast precursors (OCPs) derived from erythromyeloid progenitors (EMPs). These precursor cells subsequently fuse into OCs essential for normal bone development and repair. Postnatally, hematopoietic stem cells (HSCs) become the primary source of OCs, gradually replacing EMP-derived OCs and assuming functional roles in adulthood. The absence of OCs during bone development results in bone structure malformation, including abnormal bone marrow cavity formation and shorter long bones. Additionally, OCs are reported to have intimate interactions with blood vessels, influencing bone formation and repair through angiogenesis regulation. Upon biomaterial implantation, activation of the innate immune system ensues immediately. OCs, originating from macrophages, closely interact with the immune system. Furthermore, evidence from material-induced bone formation events suggests that OCs are pivotal in these de novo bone formation processes. Nevertheless, achieving a pure OC culture remains challenging, and interpreting OC functions in vivo faces difficulties due to the presence of other multinucleated cells around bone-forming biomaterials. We here describe the fusion characteristics of OCPs and summarize reliable markers and morphological changes in OCs during their fusion process, providing guidance for researchers in identifying OCs both in vitro and in vivo. This review focuses on OC formation, characterization, and the roles of OCs beyond resorption in various bone pathophysiological processes. Finally, therapeutic strategies targeting OCs are discussed., (© 2024. The Author(s).)

Most bone metastases are caused by primary breast or prostate cancer cells settling in the bone microenvironment, affecting normal bone physiology and function and reducing 5-year survival rates to 10% and 6%, respectively. To expedite clinical availability of novel and effective bone metastases treatments, reliable and predictive in vitro models are urgently required to screen for novel therapies as current in vitro 2D planar mono-culture models do not accurately predict the clinical efficacy. We herein engineered a novel human in vitro 3D co-culture model based on spheroids to study dynamic cellular quantities of (breast or prostate) cancer cells and human bone marrow stromal cells and screen chemotherapeutic efficacy and specificity of the common anticancer drug cisplatin. Bone metastatic spheroids (BMSs) were formed rapidly within 24 h, while the morphology of breast versus prostate cancer BMS differed in terms of size and circularity upon prolonged culture periods. Prestaining cell types prior to BMS formation enabled confocal imaging and quantitative image analysis of in-spheroid cellular dynamics for up to 7 days of BMS culture. We found that cancer cells in BMS proliferated faster and were less susceptible to cisplatin treatment compared to 2D control cultures. Based on these findings and the versatility of our methodology, BMS represent a feasible 3D in vitro model for screening of new bone cancer metastases therapies., (© 2024 The Author(s). Cell Proliferation published by Beijing Institute for Stem Cell and Regenerative Medicine and John Wiley & Sons Ltd.)

Introduction: Orthodontic mini-implants are a widely accepted treatment modality in orthodontics; however, the failure rate is moderately high. Surface roughening is the golden standard in conventional oral implantology, and this may prove beneficial for orthodontic mini-implants as well. The objective of this systematic review is to assess the effect of surface roughening on the success rate of orthodontic mini-implants in both adolescent and adult patients undergoing orthodontic treatment., Methods: Randomized studies comparing the success of surface-roughened and smooth, machined-surface orthodontic mini-implants were included. A literature search was conducted for 6 electronic databases (Pubmed/Medline, Embase, Cochrane, CINAHL, Web of Science, and Scopus), Clinical trial registry (https://www., Clinicaltrials: gov), and grey literature (Google Scholar). A manual search of the reference lists of included studies was performed. Two authors independently performed the screening, data extraction, risk of bias, and quality assessments. The risk of bias was assessed with the Cochrane risk-of-bias 2.0 Tool. Data were synthesized using a random effect model meta-analysis presented as a forest plot. The certainty in the body of evidence was assessed using the Grading of Recommendations Assessment, Development, and Evaluation tool., Results: A total of 4226 unique records were screened, and 6 of these were included in the quantitative analysis. Four additional articles were selected for a secondary outcome. A total of 364 orthodontic mini-implants were included in the primary outcome analysis. There was no statistically significant effect of surface roughening on the success of orthodontic mini-implants (odds ratio = 0.63 favoring roughened orthodontic mini-implants; 95% confidence interval, 0.35-1.14). The secondary outcome (ie, the overall failure rate of roughened orthodontic mini-implants) was 6% based on studies with high heterogeneity. Limitations of this study were the risk of bias, study imprecision, and possible publication bias, leading to a very low certainty in the body of evidence., Conclusions: There is very low-quality evidence that there is no statistically significant effect of surface roughening on the success of orthodontic mini-implants in humans. The overall failure rate of surface-roughened orthodontic mini-implants was 6%., Funding: No funding was received for this review., Registration: This study was preregistered in the Prospective Register of Systematic Reviews (CRD42022371830)., (Copyright © 2023 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Osteoarthritis (OA) is a multifactorial degenerative joint disease of which the underlying mechanisms are yet to be fully understood. At the molecular level, multiple factors including altered signaling pathways, epigenetics, metabolic imbalance, extracellular matrix degradation, production of matrix metalloproteinases, and inflammatory cytokines, are known to play a detrimental role in OA. However, these factors do not initiate OA, but are mediators or consequences of the disease, while many other factors causing the etiology of OA are still unknown. Here, it is revealed that microenvironmental osmolarity can induce and reverse osteoarthritis-related behavior of chondrocytes via altered intracellular molecular crowding, which represents a previously unknown mechanism underlying OA pathophysiology. Decreased intracellular crowding is associated with increased sensitivity to proinflammatory triggers and decreased responsiveness to anabolic stimuli. OA-induced lowered intracellular molecular crowding could be renormalized via exposure to higher extracellular osmolarity such as those found in healthy joints, which reverse OA chondrocyte's sensitivity to catabolic stimuli as well as its glycolytic metabolism., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Bone remodeling is a tightly coupled process between bone forming osteoblasts (OBs) and bone resorbing osteoclasts (OCs) to maintain bone architecture and systemic mineral homeostasis throughout life. However, the mechanisms responsible for the coupling between OCs and OBs have not been fully elucidated. Herein, we first validate that secreted extracellular vesicles by osteoclasts (OC-EVs) promote osteogenic differentiation of mesenchymal stem cells (MSCs) and further demonstrate the efficacy of osteoclasts and their secreted EVs in treating tibial bone defects. Furthermore, we show that OC-EVs contain several osteogenesis-promoting proteins as cargo. By employing proteomic and functional analysis, we reveal that mature osteoclasts secrete thrombin cleaved phosphoprotein 1 (SPP1) through extracellular vesicles which triggers MSCs osteogenic differentiation into OBs by activating Transforming Growth Factor β1 (TGFβ1) and Smad family member 3 (SMAD3) signaling. In conclusion, our findings prove an important role of SPP1, present as cargo in OC-derived EVs, in signaling to MSCs and driving their differentiation into OBs. This biological mechanism implies a paradigm shift regarding the role of osteoclasts and their signaling toward the treatment of skeletal disorders which require bone formation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

The aim of this study was to test the suitability of calcium phosphate cement mixed with poly(lactic- co -glycolic acid) (CPC-PLGA) microparticles into a ring-shaped polymeric space-maintaining device as bone graft material for lateral bone augmentation. Therefore, the bone chambers were installed on the lateral portion of the anterior region of the mandibular body of mini-pigs. Chambers were filled with either CPC-PLGA or BioOss ® particles for comparison and left for 4 and 12 weeks. Histology and histomorphometry were used to obtain temporal insight in material degradation and bone formation. Results indicated that between 4 and 12 weeks of implantation, a significant degradation of the CPC-PLGA (from 75.1% to 23.1%), as well as BioOss material, occurred (from 40.6% to 14.4%). Degradation of both materials was associated with the presence of macrophage-like and osteoclast-like cells. Furthermore, a significant increase in bone formation occurred between 4 and 12 weeks for the CPC-PLGA (from 0.1% to 7.2%), as well as BioOss material (from 8.3% to 23.3%). Statistical analysis showed that bone formation had progressed significantly better using BioOss compared to CPC-PLGA ( p  < 0.05). In conclusion, this mini-pig study showed that CPC-PLGA does not stimulate lateral bone augmentation using a bone chamber device. Both treatments failed to achieve "clinically" meaningful alveolar ridge augmentation.

Objective: Considering the elevated number of osteoporotic patients in need of bone graft procedures, we here evaluated the effect of alendronate (ALN) treatment on the regeneration of bone defects in osteoporotic rats. Bone formation was histologically and histomorphometrically assessed in rat femoral condyle bone defects filled with bone graft (Bio-Oss®) or left empty., Methods: Male Wistar rats were induced osteoporotic through orchidectomy (ORX) and SHAM-operated. The animals were divided into three groups: osteoporotic (ORX), osteoporotic treated with ALN (ORX + ALN) and healthy (SHAM). Six weeks after ORX or SHAM surgeries, bone defects were created bilaterally in femoral condyles; one defect was filled with Bio-Oss® and the other one left empty. Bone regeneration within the defects was analyzed by histology and histomorphometry after 4 and 12 weeks., Results: Histological samples showed new bone surrounding Bio-Oss® particles from week 4 onward in all three groups. At week 12, the data further showed that ALN treatment of osteoporotic animals enhanced bone formation to a 10-fold increase compared to non-treated osteoporotic control. Bio-Oss® filling of the defects promoted bone formation at both implantation periods compared to empty controls., Conclusion: Our histological and histomorphometric results demonstrate that the enteral administration of alendronate under osteoporotic bone conditions leverages bone defect regeneration to a level comparable to that in healthy bone. Additionally, Bio-Oss® is an effective bone substitute, increasing bone formation, and acting as an osteoconductive scaffold guiding bone growth in both healthy and osteoporotic bone conditions., Significance: Based on the results of this study, enteral use of ALN mitigates adverse effects of an osteoporotic condition on bone defect regeneration., (© 2023 The Authors. Clinical Implant Dentistry and Related Research published by Wiley Periodicals LLC.)

Stromal vascular fraction (SVF) is the primary isolate obtained after enzymatic digestion of adipose tissue that contains various cell types. Its successful application for cell-based construct preparation in an intra-operative setting for clinical bone augmentation and regeneration has been previously reported. However, the performance of SVF-based constructs compared with traditional ex vivo expanded adipose tissue-derived mesenchymal stromal cells (ATMSCs) remains unclear and direct comparative analyses are scarce. Consequently, we here aimed at comparing the in vitro osteogenic differentiation capacity of donor-matched SVF versus ATMSCs as well as their osteoinductive capacity. Human adipose tissue from nine different donors was used to isolate SVF, which was further purified via plastic-adherence to obtain donor-matched ATMSCs. Both cell populations were immunophenotypically characterized for mesenchymal stromal cell, endothelial, and hematopoietic markers after isolation and immunocytochemical staining was used to identify different cell types during prolonged cell culture. Based on normalization using plastic-adherence fraction determination, SVF and ATMSCs were seeded and cultured in osteogenic differentiation medium for 28 days. Further, SVF and ATMSCs were seeded onto devitalized bovine bone granules and subcutaneously implanted into nude mice. After 42 days of implantation, granules were retrieved, histologically processed, and stained with hematoxylin and eosin (HE) to assess ectopic bone formation. The ATMSCs were shown to be a homogenous cell population during cell culture, whereas SVF cultures consisted of multiple cell types. All donor-matched comparisons showed either accelerated or stronger mineralization for SVF cultures in vitro . However, neither SVF nor ATMSCs loaded on devitalized bone granules induced ectopic bone formation on subcutaneous implantation, as opposed to control granules loaded with bone morphogenetic protein-2 (BMP-2), which triggered ectopic bone formation with 100% incidence. Despite the observed lack of osteoinduction, our findings provide important in vitro evidence on the osteogenic superiority of intra-operatively available SVF as compared with donor-matched ATMSCs. Consequently, further studies should focus on optimizing the efficacy of these cell populations for implementation in orthotopic bone fracture or defect treatment.

The aim of this preclinical study was to test the applicability of calcium phosphate cement (CPC)-poly(lactic-co-glycolic acid) (PLGA)-carboxymethylcellulose (CMC) as a bone substitute material for guided bone regeneration (GBR) procedures in a clinically relevant mandibular defect model in minipigs. In the study, a predicate device (i.e., BioOss ® ) was included for comparison. Critical-sized circular mandibular bone defects were created and filled with either CPC-PLGA-CMC without coverage with a GBR membrane or BioOss covered with a GBR membrane and left to heal for 4 and 12 weeks to obtain temporal insight in material degradation and bone formation. Bone formation increased significantly for both CPC-PLGA-CMC and BioOss with increasing implantation time. Further, no significant differences were found for bone formation at either 4 or 12 weeks between CPC-PLGA-CMC and BioOss. Finally, bone substitute material degradation increased significantly for both CPC-PLGA-CMC and BioOss from 4 to 12 weeks of implantation, showing the highest degradation for CPC-PLGA-CMC (∼85%) compared to BioOss (∼12%). In conclusion, this minipig study showed that CPC-PLGA-CMC can be used as a bone-grafting material and stimulates bone regeneration to a comparable extent as with BioOss particles. Importantly, CPC-PLGA-CMC degrades faster compared to BioOss, is easier to apply into a bone defect, and does not need the use of an additional GBR membrane. Consequently, the data support the further investigation of CPC-PLGA-CMC in human clinical trials. Impact statement Guided bone regeneration (GBR) is a frequently used dental surgical technique to regenerate the alveolar ridge to allow stable implant installation. However, stabilization of the GBR membrane and avoidance of bone graft movement remain a challenge. Consequently, there is need for the development of alternative materials to be used in GBR procedures that are easier to apply and induce predictable bone regeneration. In this minipig study, we focused on the applicability of calcium phosphate cement-poly(lactic-co-glycolic acid)-carboxymethylcellulose as an alternative bone substitute material for GBR procedures without the need of an additional GBR membrane.

Craniofacial defects require a treatment approach that provides both robust tissues to withstand the forces of mastication and high geometric fidelity that allows restoration of facial architecture. When the surrounding soft tissue is compromised either through lack of quantity (insufficient soft tissue to enclose a graft) or quality (insufficient vascularity or inducible cells), a vascularized construct is needed for reconstruction. Tissue engineering using customized 3D printed bioreactors enables the generation of mechanically robust, vascularized bony tissues of the desired geometry. While this approach has been shown to be effective when utilized for reconstruction of non-load bearing ovine angular defects and partial segmental defects, the two-stage approach to mandibular reconstruction requires testing in a large, load-bearing defect. In this study, 5 sheep underwent bioreactor implantation and the creation of a load-bearing mandibular defect. Two bioreactor geometries were tested: a larger complex bioreactor with a central groove, and a smaller rectangular bioreactor that were filled with a mix of xenograft and autograft (initial bone volume/total volume BV/TV of 31.8 ± 1.6%). At transfer, the tissues generated within large and small bioreactors were composed of a mix of lamellar and woven bone and had BV/TV of 55.3 ± 2.6% and 59.2 ± 6.3%, respectively. After transfer of the large bioreactors to the mandibular defect, the bioreactor tissues continued to remodel, reaching a final BV/TV of 64.5 ± 6.2%. Despite recalcitrant infections, viable osteoblasts were seen within the transferred tissues to the mandibular site at the end of the study, suggesting that a vascularized customized bony flap is a potentially effective reconstructive strategy when combined with an optimal stabilization strategy and local antibiotic delivery prior to development of a deep-seated infection., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2023 Watson et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Across years, potential strategies to fight peri-implantitis have been notoriously explored through the antimicrobial coating implant surfaces capable of interfering with the bacterial adhesion process. However, although experimental studies have significantly advanced, no product has been marketed so far. For science to reach the society, the commercialization of research outcomes is necessary to provide real advancement in the biomedical field. Therefore, the aim of this study was to investigate the challenges involved in the development of antimicrobial dental implant surfaces to fight peri-implantitis, through a systematic search. Research articles reporting antimicrobial dental implant surfaces were identified by searching PubMed, Scopus, Web of Science, The Cochrane Library, Embase, and System of Information on Grey Literature in Europe, between 2008 and 2020. A total of 1778 studies were included for quality assessment and the review. An impressive number of 1655 articles (93,1%) comprised in vitro studies, whereas 123 articles refer to in vivo investigations. From those 123, 102 refer to animal studies and only 21 articles were published on the clinical performance of antibacterial dental implant surfaces. The purpose of animal studies is to test how safe and effective new treatments are before they are tested in people. Therefore, the discrepancy between the number of published studies clearly reveals that preclinical investigations still come up against several challenges to overcome before moving forward to a clinical setting. Additionally, researchers need to recognize that the complex journey from lab to market requires more than a great idea and resources to develop a commercial invention; research teams must possess the skills necessary to commercialize an invention.

Copper (Cu)-loaded electrospun membranes were tailored for guided bone regeneration (GBR), targeting the stimulation of innate cells active in bone growth and the prevention of bacterial infections. Functional GBR membranes were produced via an electrospinning set-up using a silk-based solution associated with polyethylene oxide (Silk/PEO - control). Experimental groups were loaded with copper oxide using varying weight percentages (0.05 % to 1 % of CuO). The morphological, structural, chemical, and mechanical properties of membranes were evaluated. Direct and indirect in vitro cytocompatibility experiments were performed with primary human bone mesenchymal stem cells and primary human umbilical vein endothelial cells. The antibacterial potential of membranes was tested with Staphylococcus aureus and Fusobacterium nucleatum biofilm. CuO was successfully incorporated into membranes as clusters without compromising their mechanical properties for clinical applicability. Increased Cu concentrations generated membranes with thinner nanofibers, greater pore areas, and stronger antimicrobial effect (p < 0.01). Cu 2+ ion was released from the nanofiber membranes during 1 week, showing higher release in acidic conditions. CuO 0.1 % and CuO 0.05 % membranes were able to support and stimulate cell adhesion and proliferation (p < 0.05), and favor angiogenic responses of vascular cells. In addition, detailed quantitative and qualitative analysis determined that amount of the attached biofilm was reduced on the tailored functional Cu 2+ -loaded GBR membrane. Importantly, these qualities represent a valuable strategy to improve the bone regeneration process and diminish the risk of bacterial infections., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Heterotopic ossification (HO) is a condition triggered by an injury leading to the formation of mature lamellar bone in extraskeletal soft tissues. Despite being a frequent complication of orthopedic and trauma surgery, brain and spinal injury, the etiology of HO is poorly understood. The aim of this study is to evaluate the hypothesis that a sustained local ionic homeostatic imbalance (SLIHI) created by mineral formation during tissue calcification modulates inflammation to trigger HO. This evaluation also considers the role SLIHI could play for the design of cell-free, drug-free osteoinductive bone graft substitutes. The evaluation contains five main sections. The first section defines relevant concepts in the context of HO and provides a summary of proposed causes of HO. The second section starts with a detailed analysis of the occurrence and involvement of calcification in HO. It is followed by an explanation of the causes of calcification and its consequences. This allows to speculate on the potential chemical modulators of inflammation and triggers of HO. The end of this second section is devoted to in vitro mineralization tests used to predict the ectopic potential of materials. The third section reviews the biological cascade of events occurring during pathological and material-induced HO, and attempts to propose a quantitative timeline of HO formation. The fourth section looks at potential ways to control HO formation, either acting on SLIHI or on inflammation. Chemical, physical, and drug-based approaches are considered. Finally, the evaluation finishes with a critical assessment of the definition of osteoinduction. STATEMENT OF SIGNIFICANCE: The ability to regenerate bone in a spatially controlled and reproducible manner is an essential prerequisite for the treatment of large bone defects. As such, understanding the mechanism leading to heterotopic ossification (HO), a condition triggered by an injury leading to the formation of mature lamellar bone in extraskeletal soft tissues, would be very useful. Unfortunately, the mechanism(s) behind HO is(are) poorly understood. The present study reviews the literature on HO and based on it, proposes that HO can be caused by a combination of inflammation and calcification. This mechanism helps to better understand current strategies to prevent and treat HO. It also shows new opportunities to improve the treatment of bone defects in orthopedic and dental procedures., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Dental implants represent an illustrative example of successful medical devices used in increasing numbers to aid (partly) edentulous patients. Particularly in spite of the percutaneous nature of dental implant systems, their clinical success is remarkable. This clinical success is at least partly related to the effective surface treatment of the artificial dental root, providing appropriate physicochemical properties to achieve osseointegration. The demographic changes in the world, however, with a rapidly increasing life expectancy and an increase in patients suffering from comorbidities that affect wound healing and bone metabolism, make that the performance of dental implants requires continuous improvement. An additional factor endangering the clinical success of dental implants is peri-implantitis, which affects both the soft and hard tissue interactions with dental implants. In this study, we shed light on the optimization of dental implant surfaces through surface engineering. Depending on the region along the artificial dental root, different properties of the surface are required to optimize prevailing tissue response to facilitate osseointegration, improve soft tissue attachment, and exert antibacterial efficacy. As such, surface engineering represents an important tool for assuring the continued future success of dental implants. Impact Statement Dental implants represent a common treatment modality nowadays for the replacement of lost teeth or fixation of prosthetic devices. This review provides a detailed overview of the role of surface engineering for dental implants and their components to optimize tissue responses at the different regions along the artificial dental root. The surface properties steering immunomodulatory processes, facilitating osseointegration, and rendering antibacterial efficacy (at both artificial root and abutment region) are described. The review finally concludes that surface engineering provides a tool to warrant that dental implants will remain future proof in more challenging applications, including an aging patient population and comorbidities that affect bone metabolism and wound healing.

Craniomaxillofacial bone defects represent a clinical challenge in the fields of maxillofacial surgery and (implant) dentistry. Regeneration of these bone defects requires the application of bone graft materials that facilitate new bone formation in a safe, reliable, and predictive manner. In addition to autologous bone graft, several types of (synthetic) bone substitute materials have become clinically available, and still major efforts are focused on improving such bone substitute materials by optimizing their properties. Given the regulatory necessity to evaluate the performance of new bone substitute materials for craniomaxillofacial bone regeneration in a large animal model with similarity to human bone before clinical application, we here describe a mini-pig mandibular bone defect model that allows for the creation of multiple (critical-size) bone defects within the mandibular body of a single animal. As examples of bone substitute materials, we utilize both the clinically used BioOss granules and an experimental calcium phosphate cement for filling the created defects. Regarding the latter, its advantages are the injectable application within the defect site, in which the material rapidly sets, and the tailorable degradation properties via the inclusion of hydrolytically degrading polymeric particles. For both bone substitute materials, we show the suitability of the bone defect model to assess bone regeneration via histology and micro-computed tomography. Impact statement Given the regulatory necessity to evaluate the performance of new bone substitute materials for craniomaxillofacial bone regeneration in a large animal model with similarity to the human bone before clinical application, we here describe a mini-pig mandibular bone defect model that allows for the creation of multiple (critical-size) bone defects within the mandibular body of a single animal that can be used for the evaluation of the bone regenerative capacity of new bone grafting materials as well as tissue-engineered products for alveolar bone regeneration.

Implant-related infections at the early healing period are considered one of the main risk factors in implant failure. Designing coatings that control bacterial adhesion and have cell stimulatory behavior remains a challenging strategy for dental implants. Here, we used plasma electrolytic oxidation (PEO) to produce antimicrobial coatings on commercially pure titanium (cpTi) using bioactive elements (calcium and phosphorus) and different copper (Cu) sources: copper acetate (CuAc), copper sulfate (CuS), and copper oxide (CuO); coatings containing only Ca and P (CaP) served as controls. Cu sources drove differential physical and chemical surface features of PEO coatings, resulting in tailorable release kinetics with a sustained Cu ion release over 10 weeks. The antibacterial effects of Cu-containing coatings were roughness-dependent. CuAc coating exhibited optimal properties in terms of its hydrophilicity, pores density, and limited surface roughness, which provided the most robust antibacterial activity combined with appropriate responses of human primary stem cells and angiogenic cells. Our data indicate that Cu source selection largely determines the functionality of Cu-containing PEO coatings regarding their antibacterial efficacy and cytocompatibility., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Malignant bone tumors are usually treated by resection of tumor tissue followed by filling of the bone defect with bone graft substitutes. Polymethylmethacrylate (PMMA) cement is the most commonly used bone substitute in clinical orthopedics in view of its reliability. However, the dense nature of PMMA renders this biomaterial unsuitable for local delivery of chemotherapeutic drugs to limit the recurrence of bone tumors. Here, we introduce porosity into PMMA cement by adding carboxymethylcellulose (CMC) to facilitate such local delivery of chemotherapeutic drugs, while retaining sufficient mechanical properties for bone reconstruction in load-bearing sites. Our results show that the mechanical strength of PMMA-based cements gradually decreases with increasing CMC content. Upon incorporation of ≥3% CMC, the PMMA-based cements released up to 18% of the loaded cisplatin, in contrast to cements containing lower amounts of CMC which only released less than 2% of the cisplatin over 28 days. This release of cisplatin efficiently killed osteosarcoma cells in vitro and the fraction of dead cells increased to 91.3% at day 7, which confirms the retained chemotherapeutic activity of released cisplatin from these PMMA-based cements. Additionally, tibias filled with PMMA-based cements containing up to 3% of CMC exhibit comparable compressive strengths as compared to intact tibias. In conclusion, we demonstrate that PMMA cements can be rendered therapeutically active by introducing porosity using CMC to allow for release of cisplatin without compromising mechanical properties beyond critical levels. As such, these data suggest that our dual-functional PMMA-based cements represent a viable treatment option for filling bone defects after bone tumor resection in load-bearing sites., (© 2022 The Authors.)

The immune system plays a crucial role in determining the implantation outcome, and macrophages are in the frontline of the inflammatory processes. Further, cellular oxidative stress resulting from the material recognition can influence how cell responses develop. Considering this, the aim of this study was to study oxidative stress and macrophages phenotypes in response to sol-gel materials with distinct in vivo outcomes. Four materials were selected (70M30T and 35M35G30T, with high biocompatibility, and 50M50G and 50V50G, with low biocompatibility). Gene expression, immunocytochemistry and cytokine secretion profiles for M1 and M2 markers were determined. Moreover, oxidative stress markers were studied. Immunocytochemistry and ELISA showed that 50M50G and 50V50G lead to a higher differentiation to M1 phenotype, while 70M30T and 35M35G30T promoted M2 differentiation. In oxidative stress, no differences were found. These results show that the balance between M1 and M2, more than individual quantification of each phenotype, determines a biomaterial outcome., (© 2021 Wiley Periodicals LLC.)

The aim of the current study is to assess the biological performance of self-healing hydrogels based on calcium phosphate (CaP) nanoparticles and bisphosphonate (BP) conjugated hyaluronan (HA) in a critical size segmental femoral bone defect model in rats. Additionally, these hydrogels are loaded with bone morphogenetic protein 2 (BMP-2) and their performance is compared in healthy and osteoporotic bone conditions. Treatment groups comprise internal plate fixation and placement of a PTFE tube containing hydrogel (HA BP -CaP) or hydrogel loaded with BMP-2 in two dosages (HA BP -CaP-lowBMP2 or HA BP -CaP-highBMP2). Twelve weeks after bone defect surgery, bone formation is analyzed by X-ray examination, micro-CT analysis, and histomorphometry. The data show that critical size, segmental femoral bone defects cannot be healed with HA BP -CaP gel alone. Loading of the HA BP -CaP gel with low dose BMP-2 significantly improve bone formation and resulted in defect bridging in 100% of the defects. Alternatively, high dose BMP-2 loading of the HA BP -CaP gel does not improve bone formation within the defect area, but leads to excessive bone formation outside the defect area. Bone defect healing is not affected by osteoporotic bone conditions., (© 2021 The Authors. Macromolecular Bioscience published by Wiley-VCH GmbH.)

Osteochondral defects present a unique clinical challenge due to their combination of phenotypically distinct cartilage and bone, which require specific, stratified biochemical cues for tissue regeneration. Furthermore, the articular cartilage exhibits significantly worse regeneration than bone due to its largely acellular and avascular nature, prompting significant demand for regenerative therapies. To address these clinical challenges, we have developed a bilayered, modular hydrogel system that enables the click functionalization of cartilage- and bone-specific biochemical cues to each layer. In this system, the crosslinker poly(glycolic acid)-poly(ethylene glycol)-poly(glycolic acid)-di(but-2-yne-1,4-dithiol) (PdBT) was click conjugated with either a cartilage- or bone-specific peptide sequence of interest, and then mixed with a suspension of thermoresponsive polymer and mesenchymal stem cells (MSCs) to generate tissue-specific, cell-encapsulated hydrogel layers targeting the cartilage or bone. We implanted bilayered hydrogels in rabbit femoral condyle defects and investigated the effects of tissue-specific peptide presentation and cell encapsulation on osteochondral tissue repair. After 12 weeks implantation, hydrogels with a chondrogenic peptide sequence produced higher histological measures of overall defect filling, cartilage surface regularity, glycosaminoglycan (GAG)/cell content of neocartilage and adjacent cartilage, and bone filling and bonding compared to non-chondrogenic hydrogels. Furthermore, MSC encapsulation promoted greater histological measures of overall defect filling, cartilage thickness, GAG/cell content of neocartilage, and bone filling. Our results establish the utility of this click functionalized hydrogel system for in vivo repair of the osteochondral unit. STATEMENT OF SIGNIFICANCE: Osteochondral repair requires mimicry of both cartilage- and bone-specific biochemical cues, which are highly distinct. While traditional constructs for osteochondral repair have mimicked gross compositional differences between the cartilage and bone in mineral content, mechanical properties, proteins, or cell types, few constructs have recapitulated the specific biochemical cues responsible for the differential development of cartilage and bone. In this study, click biofunctionalized, bilayered hydrogels produced stratified presentation of developmentally inspired peptide sequences for chondrogenesis and osteogenesis. This work represents, to the authors' knowledge, the first application of bioconjugation chemistry for the simultaneous repair of bone and cartilage tissue. The conjugation of tissue-specific peptide sequences successfully promoted development of both cartilage and bone tissues in vivo., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021. Published by Elsevier Ltd.)

Osteoclasts are multinucleated cells derived from the hematopoietic monocyte/macrophage lineage that possess the unique capacity to resorb bone. Due to the crucial role of osteoclasts in maintaining bone homeostasis and pathologies, this cell type is pivotal in multiple research areas dedicated to bone physiology in health and disease. Although numerous methods for generation of human osteoclasts are already available, those rely either on cell labeling-based purification or an intermediate adhesion step after which cells are directly differentiated toward osteoclasts. While the former requires additional reagents and equipment, the latter harbors the risk of variable osteoclast formation due to varying numbers of osteoclast precursors available for different donors. In this study, we report a facile and reliable three-step method for the generation of human osteoclasts from blood-derived precursor cells. Monocytes were obtained after adhering peripheral blood-derived mononuclear cells to plastic substrates followed by macrophage induction and proliferation resulting in a homogeneous population of osteoclast precursors. Finally, macrophages were seeded into suitable culture vessels and differentiated toward osteoclasts. Osteoclastogenesis was monitored longitudinally using nondestructive techniques, while the functionality of mature osteoclasts was confirmed after 14 days of culture by analysis of functional (e.g., elevated tartrate-resistant acid phosphatase [TRAP]-activity, resorption) and morphological (e.g., presence of TRAP, actin ring, and integrin β 3 ) characteristics. Furthermore, we propose to use combinatory staining of three morphological osteoclast markers, rather than previously reported staining of a single or maximal two markers, to clearly distinguish osteoclasts from undifferentiated mononuclear cells. Impact statement Research related to bone biology requires a standardized and reliable method for in vitro generation of human osteoclasts. We here describe such a procedure which avoids shortcomings of previously published protocols. Further, we report on nondestructive methods to qualitatively and quantitatively monitor osteoclastogenesis longitudinally, and on analysis of osteoclast generation and functionality after 14 days. Specifically, we recommend assessment of morphological human osteoclast characteristics using combinatory staining of three markers to confirm successful osteoclast generation.

Complications in bone regeneration in patients with systemic impaired bone metabolism (e.g., osteoporosis) represent a rapidly increasing clinical challenge. Alendronate and simvastatin are drugs commonly used to promote bone metabolism in osteoporotic conditions. The aim of this study was to evaluate initial bone regeneration within osseous defects grafted with beta-tricalcium phosphate (β-TCP) in adjunction with systemic coadministrations of alendronate and simvastatin (i.e., daily subcutaneous injection for 3 weeks) in healthy and osteoporotic rats. Eighty Wistar female rats were ovariectomized (OVX; n  = 40) or sham operated ( n  = 40). Six weeks later, osseous defects (a 3-mm critical-sized defect) were created in the left femoral condyles and then grafted with β-TCP. From the day following graft installation, OVX and sham animals received for 3 weeks a daily subcutaneous injection of alendronate (50 μg/kg of body weight) and simvastatin (5 mg/kg of body weight), alone or in combination. A control group was included, which received subcutaneous saline administration. At the end of the 3 weeks, rats were euthanized and specimens (femoral condyles) were retrieved for histological evaluation and histomorphometric measurements, that is, bone area (BA%) and remaining bone graft (RBG%). In osteoporotic rats, 3 weeks of daily subcutaneous injection of combined therapy (alendronate plus simvastatin) led to a significant ( p  < 0.05) increase in BA% and a significant decrease in RBG% compared to healthy controls in osseous defects grafted with β-TCP (BA%: 28.6 ± 12.0 vs. 18.2 ± 7.6, RBG% 61.3 ± 11.1 vs. 70.7 ± 7.3). No significant differences in BA% and RBG% were found in the OVX rats for single treatments. Furthermore, healthy controls showed similar BA% and RBG% upon single or combined therapy compared to nontreated control rats. Daily coinjections (for 3 weeks) of alendronate plus simvastatin result in a significant enhancement of bone regeneration within osseous defects grafted with β-TCP in osteoporotic rats. Despite the expected effects on osteoporotic bone, our study did not confirm the hypothesized benefit of alendronate and simvastatin on bone regeneration in osseous defects in healthy conditions. The efficacy of the combination drug therapy on bone regeneration demands further investigation to elucidate molecular and cellular aspects underlying this therapy.

This study demonstrated a drug-delivery system with anionic beta cyclodextrin (β-CD) complexes to retain tetracycline (TC) and control its release from multilayers of poly(acrylic acid) (PAA) and poly(l-lysine) (PLL) in a ten double layers ([PAA/PLL] 10 ) coating onto titanium. The drug-delivery capacity of the multilayer system was proven by controlled drug release over 15 days and sustained released over 30 days. Qualitative images confirmed TC retention within the layer-by-layer (LbL) over 30 days of incubation. Antibacterial activity of TC/anionic β-CD released from the LbL was established against Staphylococcus aureus species. Remarkably, [PAA/PLL] 10 /TC/anionic β-CD antibacterial effect was sustained even after 30 days of incubation. The non-cytotoxic effect of the multilayer system revealed normal human gingival fibroblast growth. It is expected that this novel approach and the chemical concept to improve drug incorporation into the multilayer system will open up possibilities to make the drug release system more applicable to implantable percutaneous devices., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

We evaluated the effect of osteoporotic induction after eight weeks of initial healing of bone defects grafted with a xenograft material in a rat model. Bone defects were created in the femoral condyles of 16 female Wistar rats (one defect per rat). The defects were filled with bovine bone (Inter-Oss) granules. After eight weeks of bone healing, rats were randomly ovariectomized (OVX) or sham-operated (SHAM). At 14 weeks of bone healing, all animals were euthanized. Bone specimens were harvested and processed for histological and histomorphometric analyses to assess new bone formation (N-BF%), remaining bone graft (RBG%) and trabecular bone space (Tb.Sp%) within the defect area. After 14 weeks of bone healing, histological evaluation revealed a significant alteration in trabecular bone in OVX rats compared to SHAM rats. There was lower N-BF% in OVX rats (22.5% ± 3.0%) compared to SHAM rats (37.7% ± 7.9%; p < 0.05). Additionally, the RBG% was significantly lower in OVX (23.7% ± 5.8%) compared to SHAM (34.8% ± 9.6%; p < 0.05) rats. Finally, the Tb.Sp% was higher in OVX (53.8% ± 7.7%) compared to SHAM (27.5% ± 14.3%; p < 0.05) rats. In conclusion, within the limitations of this study, inducing an osteoporotic condition in a rat model negatively influenced bone regeneration in the created bone defect and grafted with a xenograft material.

Synthetic calcium phosphate (CaP) ceramics represent the most widely used biomaterials for bone regenerative treatments due to their biological performance that is characterized by bioactivity and osteoconductive properties. From a clinical perspective, injectable CaP cements (CPCs) are highly appealing, as CPCs can be applied using minimally invasive surgery and can be molded to optimally fill irregular bone defects. Such CPCs are prepared from a powder and a liquid component, which upon mixing form a paste that can be injected into a bone defect and hardens in situ within an appropriate clinical time window. However, a major drawback of CPCs is their poor degradability. Ideally, CPCs should degrade at a suitable pace to allow for concomitant new bone to form. To overcome this shortcoming, control over CPC degradation has been explored using multiple approaches that introduce macroporosity within CPCs. This strategy enables faster degradation of CPC by increasing the surface area available to interact with the biological surroundings, leading to accelerated new bone formation. For a comprehensive overview of the path to degradable CPCs, this review presents the experimental procedures followed for their development with specific emphasis on (bio)material properties and biological performance in pre-clinical bone defect models., Competing Interests: Declaration of Competing Interest The authors declare no conflict of interest and no benefit of any kind was received directly or indirectly., (Copyright © 2020. Published by Elsevier Ltd.)

Platinum-based drugs such as cisplatin are very potent chemotherapeutics, whereas radioactive platinum ( 195m Pt) is a rich source of low-energy Auger electrons, which kills tumor cells by damaging DNA. Auger electrons damage cells over a very short range. Consequently, 195m Pt-based radiopharmaceuticals should be targeted toward ​tumors to maximize radiotherapeutic efficacy and minimize Pt-based systemic toxicity. Herein, we show that systemically administered radioactive bisphosphonate-functionalized platinum ( 195m Pt-BP) complexes specifically accumulate in intratibial bone metastatic lesions in mice. The 195m Pt-BP complexes accumulate 7.3-fold more effectively in bone 7 days after systemic delivery compared to 195m Pt-cisplatin lacking bone-targeting bisphosphonate ligands. Therapeutically, 195m Pt-BP treatment causes 4.5-fold more γ-H2AX formation, a biomarker for DNA damage in metastatic tumor cells compared to 195m Pt-cisplatin. We show that systemically administered 195m Pt-BP is radiotherapeutically active, as evidenced by an 11-fold increased DNA damage in metastatic tumor cells compared to non-radioactive Pt-BP controls. Moreover, apoptosis in metastatic tumor cells is enhanced more than 3.4-fold upon systemic administration of 195m Pt-BP vs. radioactive 195m Pt-cisplatin or non-radioactive Pt-BP controls. These results provide the first preclinical evidence for specific accumulation and strong radiotherapeutic activity of 195m Pt-BP in bone metastatic lesions, which offers new avenues of research on radiotherapeutic killing of tumor cells in bone metastases by Auger electrons., Competing Interests: The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: R.A.N. and S.C.G.L. are employees of Radboudumc. K.D.S. is employee of the Nuclear Research & Consultancy Group (NRG). N.M. is employee of the Università degli Studi di Bari Aldo Moro. A patent application has been submitted by the Nuclear Research & Consultancy Group (NRG), Radboudumc and N.M. based on these results., (© 2020 The Author(s).)

We evaluated the response to peri-implant bone placed in the femoral condyle of osteoporotic rats, following intravenous zoledronate (ZOL) treatment in three settings: pre-implantation (ZOL-Pre), post-implantation (ZOL-Post), and pre- + post-implantation (ZOL-Pre+Post). Twenty-four female Wistar rats were ovariectomized (OVX). After 12 weeks, the rats received titanium implants in the right femoral condyle. ZOL (0.04 mg/kg, weekly) was administered to six rats 4 weeks pre-implantation and was stopped at implant placement. To another six rats, ZOL was given post-implantation and continued for 6 weeks. Additional six rats received ZOL treatment pre- and post-implantation. Control animals received weekly saline intravenous injections. At 6 weeks post-implantation, samples were retrieved for histological evaluation of the percentage of bone area (%BA) and of the percentage of bone-to-implant contact (%BIC). BA% for ZOL-Pre (29.6% ± 9.0%) and ZOL-Post (27.9% ± 5.6%) rats were significantly increased compared to that of the controls (17.3% ± 3.9%, p < 0.05). In contrast, ZOL-Pre+Post rats (20.4% ± 5.0%) showed similar BA% compared to Saline controls ( p = 0.731). BIC% revealed a significant increase for ZOL-Post (65.8% ± 16.9%) and ZOL-Pre+Post (68.3% ± 10.0%) rats compared with that of Saline controls (43.3% ± 9.6%, p < 0.05), while ZOL-Pre rats (55.6% ± 19%) showed a BIC% comparable to that of Saline controls ( p = 0.408). Our results suggest that receiving intravenous ZOL treatment before or after implant placement enhances peri-implant bone responses in terms of bone area. However, the effect of different ZOL treatment regimens on BIC% was found to be inconclusive.

Osteochondral tissue repair represents a common clinical need, with multiple approaches in tissue engineering and regenerative medicine being investigated for the repair of defects of articular cartilage and subchondral bone. A full thickness rabbit femoral condyle defect is a clinically relevant model of an articulating and load bearing joint surface for the investigation of osteochondral tissue repair by various cell-, biomolecule-, and biomaterial-based implants. In this protocol, we describe the methodology and 1.5- to 2-h surgical procedure for the generation of a reproducible, full thickness defect for construct implantation in the rabbit medial femoral condyle. Furthermore, we describe a step-by-step procedure for osteochondral tissue collection and the assessment of tissue formation using standardized histological, radiological, mechanical, and biochemical analytical techniques. This protocol illustrates the critical steps for reproducibility and minimally invasive surgery as well as applications to evaluate the efficacy of cartilage and bone tissue engineering implants, with emphasis on the usage of histological and radiological measures of tissue growth. Impact statement Although multiple surgical techniques have been developed for the treatment of osteochondral defects, repairing the tissues to their original state remains an unmet need. Such limitations have thus prompted the development of various constructs for osteochondral tissue regeneration. An in vivo model that is both clinically relevant and economically practical is necessary to evaluate the efficacy of different tissue engineered constructs. In this article, we present a full thickness rabbit femoral condyle defect model and describe the analytical techniques to assess the regeneration of osteochondral tissue.

Mandibular reconstruction requires functional and aesthetic repair and is further complicated by contamination from oral and skin flora. Antibiotic-releasing porous space maintainers have been developed for the local release of vancomycin and to promote soft tissue attachment. In this study, mandibular defects in six sheep were inoculated with 10 6 colony forming units of Staphylococcus aureus; three sheep were implanted with unloaded porous space maintainers and three sheep were implanted with vancomycin-loaded space maintainers within the defect site. During the same surgery, 3D-printed in vivo bioreactors containing autograft or xenograft were implanted adjacent to rib periosteum. After 9 weeks, animals were euthanized, and tissues were analyzed. Antibiotic-loaded space maintainers were able to prevent dehiscence of soft tissue overlying the space maintainer, reduce local inflammatory cells, eliminate the persistence of pathogens, and prevent the increase in mandibular size compared to unloaded space maintainers in this sheep model. Animals with an untreated mandibular infection formed bony tissues with greater density and maturity within the distal bioreactors. Additionally, tissues grown in autograft-filled bioreactors had higher compressive moduli and higher maximum screw pull-out forces than xenograft-filled bioreactors. In summary, we demonstrated that antibiotic-releasing space maintainers are an innovative approach to preserve a robust soft tissue pocket while clearing infection, and that local infections can increase local and remote bone growth., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Supplementation of CaP-based bone graft substitutes with bioinorganics such as strontium, zinc or silicon is an interesting approach to increase the biological performance in terms of bone regenerative potential of calcium phosphate (CaP)-based bone substitutes. However, the in vivo efficacy of this approach has not been systematically analyzed, yet. Consequently, we performed a systematic review using the available literature regarding the effect of bioinorganic supplementation in CaP-based biomaterials on new bone formation and material degradation in preclinical animal bone defect models and studied this effect quantitatively by performing a meta-analysis. Additional subgroup analyses were used to study the effect of different bioinorganics, animal model, or phase category of CaP-based biomaterial on bone formation or material degradation. Results show that bioinorganic supplementation increases new bone formation (standardized mean difference [SMD]: 1.43 SD, confidence interval [CI]: 1.13-1.73). Additional subgroup analysis showed that strontium, magnesium and silica significantly enhanced bone formation, while zinc did not have any effect. This effect of bioinorganic supplementation on new bone formation was stronger for DCPD or β-TCP and biphasic CaPs than for HA or α-TCP (p < 0.001). In general, material degradation was slightly hindered by bioinorganic supplementation (mean difference [MD]: 0.84%, CI: 0.01-1.66), with the exception of strontium that significantly enhanced degradation. Overall, bioinorganic supplementation represents an effective approach to enhance the biological performance of CaP-based bone substitutes.

Over the last decade, demand has increased for developing new, alternative materials in pediatric trauma care to overcome the disadvantages associated with conventional implant materials. Magnesium (Mg)-based alloys seem to adequately fulfill the vision of a homogeneously resorbable, biocompatible, load-bearing and functionally supportive implant. The aim of the present study is to introduce the high-strength, lean alloy Mg‒0.45Zn‒0.45Ca, in wt% (ZX00), and for the first time investigate the clinical applicability of screw osteosynthesis using this alloy that contains no rare-earth elements. The alloy was applied in a growing sheep model with osteotomized bone (simulating a fracture) and compared to a non-osteotomy control group regarding degradation behavior and fracture healing. The alloy exhibits an ultimate tensile strength of 285.7 ± 3.1 MPa, an elongation at fracture of 18.2 ± 2.1%, and a reduced in vitro degradation rate compared to alloys containing higher amounts of Zn. In vivo, no significant difference between the osteotomized bone and the control group was found regarding the change in screw volume over implantation time. Therefore, it can be concluded that the fracture healing process, including its effects on the surrounding area, has no significant influence on degradation behavior. There was also no negative influence from hydrogen-gas formation on fracture healing. Despite the proximal and distal screws showing chronologically different gas release, the osteotomy showed complete consolidation. STATEMENT OF SIGNIFICANCE: Conventional implants involve several disadvantages in pediatric trauma care. Magnesium-based alloys seem to overcome these issues as discussed in the recent literature. This study evaluates the clinical applicability of high-strength lean Mg‒0.45Zn‒0.45Ca (ZX00) screws in a growing-sheep model. Two groups, one including a simulated fracture and one group without fracture, underwent implantation of the alloy and were compared to each other. No significant difference regarding screw volume was observed between the groups. There was no negative influence of hydrogen-gas formation on fracture healing and a complete fracture consolidation was found after 12 weeks for all animals investigated., Competing Interests: Declaration of Competing Interest None., (Copyright © 2020 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Vertebral compression fractures (VCFs) are a very common problem among the elderly, which ultimately result in severe pain and a drastically reduced quality of life. An effective treatment for VCFs is the minimally invasive augmentation of the damaged vertebrae through vertebroplasty and/or kyphoplasty. These surgical procedures treat the affected vertebrae by injection of poly(methyl methacrylate) cement (PMMA) into the vertebral body. However, clinical use of PMMA cement is associated with major drawbacks. Bioceramic cements such as injectable calcium phosphate cements (CPC) exhibit a superior osteocompatibility over PMMA cements, but are too brittle for load-bearing applications. Here, we evaluated the handling and mechanical properties of a recently developed CPC formulation containing both poly(vinyl alcohol) (PVA) fibers and carboxymethyl cellulose (CMC) as an alternative to PMMA cement for vertebro- and kyphoplasty. Our results demonstrate that the addition of CMC rendered fiber-reinforced CPC injectable without negatively affecting its mechanical properties. Further, an ex vivo mechanical analysis clearly showed that extravasation of PVA fiber-reinforced CPC with CMC into trabecular bone was limited as compared to PMMA. Finally, we observed that the ex vivo biomechanical performance of vertebrae treated with CMC and PVA fibers was similar to PMMA-treated vertebrae. The obtained data suggests that PVA fiber-reinforced CPCs with CMC possesses adequate handling, mechanical and structural characteristics for vertebro- and kyphoplasty procedures. These data pave the way for future preclinical studies on the feasibility of treating vertebral compression fractures using PVA fiber-reinforced CPC with CMC.

Hydroxyapatite (HA) nanoparticles are commonly used as building blocks in the design of bone-substituting biomaterials. Recently, these nanoparticles have been considered for the treatment of metastasis disease, since their pH-dependent dissolution behavior allows for precise tuning of release kinetics of loaded cargo. Herein we show that the capacity of drug-loaded nanoparticles stabilized with citrate ions reduce cancer cell survival in an embryonic zebrafish xenograft model. In particular, in vitro studies demonstrate that PtPP-loaded HA nanoparticles exhibit anti-proliferative activity against breast cancer cells at reduced pH. In vivo studies using an embryonic zebrafish xenograft model reveal that PtPP co-delivered with human breast cancer cells strongly reduce cancer cell survival. Similarly, co-injection of breast cancer cells with citrate-functionalized and PtPP-loaded HA nanoparticles into zebrafish significantly reduces survival of cancer cells due to release of chemotherapeutically active kiteplatin species. These results demonstrate the preclinical efficacy of drug-loaded nanoparticles against human breast cancer cells in a xenogenic embryonic in vivo model.

The generation of vascularized mineralized tissues of complex geometry without the use of extrinsic growth factors or exogenous cells requires a large animal model to recapitulate the challenges seen in the clinic. The proposed versatile ovine model can be utilized to investigate the use of a customized bioreactor to generate mineralized tissue, matching the size and shape of a defect before transfer to and integration within another site. The protocol results in bioreactors that can be harvested for investigation of the effects of different biomaterials for the generation of bone or to generate tissues appropriate for repair of bony defects; this protocol focuses on reconstruction of the mandible but could be modified for orthopedic applications. The bioreactor packing material can be altered, allowing for the study of various commercially available or novel graft materials. The surgical procedure requires ∼1.5 h to implant four bioreactors adjacent to rib periosteum. After 9 weeks, the harvest of the bioreactor tissue takes approximately 1 h. If creating a craniofacial defect, an additional 2 h should be taken for mandibular defect creation and 2 to 3 h for the reconstruction. Sheep that have undergone reconstruction are typically euthanized after 12 weeks to allow for evaluation of transferred tissues. In this protocol, we discuss the necessary steps to ensure the reproducibility and analytical techniques to assess bone regeneration such as microcomputed tomography, mechanical analysis, and histology. Impact statement Bone grafting is a frequent procedure in the fields of orthopedics, otolaryngology, and oral and maxillofacial surgery. Generating customized, vascularized, and mechanically robust bony tissues while eliminating common complications such as donor site morbidity with autograft harvest or lack of suitable mechanical properties with commercially available synthetic graft would greatly improve the lives of patients. A large animal model is necessary to generate tissues of clinically relevant geometries. In this article, a reproducible ovine model of in vivo bioreactor technology toward customized bone generation is presented with broad application to tissue engineering and regenerative medicine.

The development of bone substitute materials (BSMs) intended for load-bearing bone defects is highly complicated, as biological and mechanical requirements are often contradictory. In recent years, biological BSMs have been developed which allow for a more efficient integration of the material with the surrounding osseous environment and, hence, a higher mechanical stability of the treated defect. However, while these materials are promising, they are still far from ideal. Consequently, extensive preclinical experimentation is still required. The current review provides a comprehensive overview of biomechanical considerations relevant for the design of biological BSMs. Further, the preclinical evaluation of biological BSMs intended for application in highly loaded skeletal sites is discussed. The selected animal models and implantation site should mimic the pathophysiology and biomechanical loading patterns of human bone as closely as possible. In general, sheep are among the most frequently selected animal models for the evaluation of biomaterials intended for highly loaded skeletal sites. Regarding the anatomical sites, segmental bone defects created in the limbs and spinal column are suggested as the most suitable. Furthermore, the outcome measurements used to assess biological BSMs for regeneration of defects in heavily loaded bone should be relevant and straightforward. The quantitative evaluation of bone defect healing through ex vivo biomechanical tests is a valuable addition to conventional in vivo tests, as it determines the functional efficacy of BSM-induced bone healing. Finally, we conclude that further standardization of preclinical studies is essential for reliable evaluation of biological BSMs in highly loaded skeletal sites.

The successful tissue integration of a biomedical material is mainly determined by the inflammatory response after implantation. Macrophage behavior toward implanted materials is pivotal to determine the extent of the inflammatory response. Hydrogels with different properties have been developed for various biomedical applications such as wound dressings or cell-loaded scaffolds. However, there is limited investigation available on the effects of hydrogel mechanical properties on macrophage behavior and the further host inflammatory response. To this end, methacrylate-gelatin (GelMA) hydrogels were selected as a model material to study the effect of hydrogel stiffness (2, 10, and 29 kPa) on macrophage phenotype in vitro and the further host inflammatory response in vivo. Our data showed that macrophages seeded on stiffer surfaces tended to induce macrophages toward a proinflammatory (M1) phenotype with increased macrophage spreading, more defined F-actin and focal adhesion staining, and more proinflammatory cytokine secretion and cluster of differentiation (CD) marker expression compared to those on surfaces with a lower stiffness. When these hydrogels were further subcutaneously implanted in mice to assess their inflammatory response, GelMA hydrogels with a lower stiffness showed more macrophage infiltration but thinner fibrotic capsule formation. The more severe inflammatory response can be attributed to the higher percentage of M1 macrophages induced by GelMA hydrogels with a higher stiffness. Collectively, our data demonstrated that macrophage behavior and the further inflammatory response are mechanically regulated by hydrogel stiffness. The macrophage phenotype rather than the macrophage number predominately determined the inflammatory response after the implantation, which can provide new insights into the future design and application of novel hydrogel-based biomaterials.

Chemotherapeutic treatment of patients with bone tumors or bone metastases often leads to severe side effects such as high drug toxicity, lack of tumor specificity and induced drug resistance. A novel strategy to treat early stages of bone metastases involves local co-delivery of multiple chemotherapeutic agents to synergistically improve the curative effect and overcome shortcomings of traditional chemotherapy. Herein we show that selenite-doped hydroxyapatite nanoparticles loaded with a hydroxyapatite-binding anti-tumor platinum complex (PtPP-HASe) selectively reduce proliferation of cancer cells without reducing proliferation of bone marrow stem cells. These PtPP-HASe particles were nanocrystalline with selenium (Se) and platinum (Pt) contents ranging between 0-10 and 1.5-3 wt%, respectively. Release kinetics of Se and Pt from PtPP-HASe nanoparticles resulted in a cumulative release of ∼10 and ∼66 wt% after 7 days, respectively. At a Pt/Se ratio of 8, released Pt and Se species selectively reduced cell number of human prostate (PC3) and human breast cancer cells (MDA-MB-231) by a factor of >10 with limited effects on co-cultured human bone marrow stem cells (hBMSc). These novel nanoparticles demonstrate high anti-cancer selectivity, which offers ample opportunities for the design of novel biomaterials with potent and selective chemotherapeutic efficacy against cancer cells.

Platinum-based chemotherapeutics exhibit excellent antitumor properties. However, these drugs cause severe side effects including toxicity, drug resistance, and lack of tumor selectivity. Tumor-targeted drug delivery has demonstrated great potential to overcome these drawbacks. Herein, we aimed to design radioactive bisphosphonate-functionalized platinum ( 195m Pt-BP) complexes to confirm preferential accumulation of these Pt-based drugs in metabolically active bone. In vitro NMR studies revealed that release of Pt from Pt BP complexes increased with decreasing pH. Upon systemic administration to mice, Pt-BP exhibited a 4.5-fold higher affinity to bone compared to platinum complexes lacking the bone-seeking bisphosphonate moiety. These Pt-BP complexes formed less Pt-DNA adducts compared to bisphosphonate-free platinum complexes, indicating that in vivo release of Pt from Pt-BP complexes proceeded relatively slow. Subsequently, radioactive 195m Pt-BP complexes were synthesized using 195m Pt(NO 3 ) 2 (en) as precursor and injected intravenously into mice. Specific accumulation of 195m Pt-BP was observed at skeletal sites with high metabolic activity using micro-SPECT/CT imaging. Furthermore, laser ablation-ICP-MS imaging of proximal tibia sections confirmed that 195m Pt BP co-localized with calcium in the trabeculae of mice tibia.

Peri-implantitis is an inflammatory disease of hard and soft tissues around osseointegrated implants, followed by a progressive damage of alveolar bone. Oral microorganisms can adhere to all types of surfaces by the production of multiple adhesive factors. Inherent properties of materials will influence not only the number of microorganisms, but also their profile and adhesion force onto the material surface. In this perspective, strategies to reduce the adhesion of pathogenic microorganisms on dental implants and their components should be investigated in modern rehabilitation concepts in implant dentistry. To date, several metallic nanoparticle films have been developed to reduce the growth of pathogenic bacteria. However, the main drawback in these approaches is the potential toxicity and accumulative effect of the metals over time. In view of biological issues and in attempt to prevent and/or treat peri-implantitis, biomaterials as carriers of antimicrobial substances have attracted special attention for application as coatings on dental implant devices. This review will focus on biomaterial-based possibilities to prevent and/or treat peri-implantitis by describing concepts and dental implant components suitable for engagement in preventing and treating this disease. Additionally, we raise important criteria referring to the geometric parameters of dental implants and their components, which can directly affect peri-implant tissue conditions. Finally, we overview currently available biomaterial systems that can be used in the field of oral implantology., (© 2019 The Authors. Journal of Periodontal Research published by John Wiley & Sons Ltd.)