The use of NO2 absorption cross section temperature sensitivity to derive NO2 profile temperature and stratospheric–tropospheric column partitioning from visible direct-sun DOAS measurements.

This paper presents a temperature sensitivity method (TESEM) to accurately calculate total vertical NO2 column, atmospheric slant NO2 profile-weighted temperature (T ), and to separate stratospheric and tropospheric columns from direct-sun (DS), ground-based measurements using the retrieved T . TESEM is based on differential optical absorption spectroscopy (DOAS) fitting of the linear temperature-dependent NO2 absorption cross section, σ(T ), regression model (Vandaele et al., 2003). Separation between stratospheric and tropospheric columns is based on the primarily bimodal vertical distribution of NO2 and an assumption that stratospheric effective temperature can be represented by temperature at 27 km±3 K, and tropospheric effective temperature is equal to surface temperature within 3–5 K. These assumptions were derived from the Global Modeling Initiative (GMI) chemistry-transport model (CTM) simulations over two northern midlatitude sites in 2011. TESEM was applied to the Washington State University Multi-Function DOAS instrument (MFDOAS) measurements at four midlatitude locations with low and moderate NO2 anthropogenic emissions: (1) the Jet Propulsion Laboratory's Table Mountain Facility (JPLTMF), CA, USA (34.38 N/117.68 W); (2) Pullman, WA, USA (46.73 N/117.17 W); (3) Greenbelt, MD, USA (38.99 N/76.84 W); and (4) Cabauw, the Netherlands (51.97 N/4.93 E) during July 2007, June–July 2009, July– August and October 2011, November 2012–May 2013, respectively. NO2 T and total, stratospheric, and tropospheric NO2 vertical columns were determined over each site. [ABSTRACT FROM AUTHOR]