Optimal reactive power control of DGs for voltage regulation of MV distribution systems using sensitivity analysis method and PSO algorithm.

This paper addresses the problem of reactive power control of distributed generation (DG) units in the medium voltage (MV) distribution systems to maintain the system voltages within the predefined limits. An efficient approach for the load flow calculation is used here which is based on the topological structure of the network. It has been formulated for the radial distribution systems. A direct voltage sensitivity analysis method is developed in this paper which is also based on the topological structure of the network and independent of the network operating points. Thus, the sensitivity matrix is calculated once with the load flow program and it is used in all the system working conditions. The problem of DGs reactive power control is formulated as an optimization problem which uses the sensitivity analysis for linearizing the system around its operating points. The objective of the optimization problem is to return the system voltages inside the permitted range by using the reactive power of DGs in an optimal way. The optimal solutions are obtained by implementing particle swarm optimization (PSO) algorithm. Then, the results are verified by running a load flow considering new values of DGs reactive power. The procedure is repeated as long as a voltage violation is observed. Simulation results reveal that the proposed algorithm is capable of keeping the system voltages within the permitted limits. [ABSTRACT FROM AUTHOR]