Assessment of InSAR Atmospheric Correction Using Both MODIS Near-Infrared and Infrared Water Vapor Products.

Water vapor variations affect the interferometric synthetic aperture radar (InSAR) signal transmission and the accuracy of the InSAR measurements. The Moderate Resolution Imaging Spectroradiometer (MODIS) near infrared (nIR) water vapor product can correct InSAR atmospheric effects effectively, but it only works for the synthetic aperture radar (SAR) images acquired during the daytime. Although the MODIS infrared (IR) water vapor product owns poorer accuracy and spatial resolution than the nIR product, it is available for daytime as well as nighttime. In order to improve the accuracy of water vapor measurements from the MODIS IR product, a differential linear calibration model (DLCM) has been developed in this paper. The calibrated water vapor measurements from the IR product are then used for wet delay map production and nighttime overpass SAR interferogram atmospheric correction. Results show that the accuracy of the MODIS IR product can be improved effectively after calibration with the DLCM, and the derived wet delays are more suitable for InSAR atmospheric correction than original measurements from the IR product. Furthermore, a MODIS altitude-correlated turbulence model (MATM) is incorporated to correct the atmospheric effects from another descending ASAR interferogram. Results show that the MATM can reduce altitude-dependent water vapor artifacts more effectively than the traditional correction method without the need to incorporate the altitude information. [ABSTRACT FROM PUBLISHER]