Back to Search
Start Over
Deriving correction functions to model the efficiency of noise barriers with complex shapes using boundary element simulations.
- Source :
-
Applied Acoustics . Jan2016, Vol. 102, p88-99. 12p. - Publication Year :
- 2016
-
Abstract
- The boundary element method (BEM) is a commonly used method to compute the insertion loss of noise barriers having arbitrary cross-sections. For large scale three-dimensional problems, however, the BEM is not feasible. On the other hand, standardized calculation methods for noise mapping are efficient, but shapes other than the straight barrier cannot be properly calculated. Attempts to merge these two approaches by using BEM to derive correction functions based on geometrical quantities such as source and target angle as well as the path length elongation between source and receiver caused by the barrier were usually focused on a small set of barrier types, dimensions, absorptive configurations, source or receiver positions. The main objective of this study is to investigate which functions based on the most common geometrical parameters are well suited for approximating the efficiency of different types of barriers, dimensions and absorptive configurations. To achieve this, numerous combinations of 7 different barrier types, different heights and widths as well as 3 different absorptive configurations were simulated using the 2D BEM for 8 different source positions. The octave-band-wise efficiency, i.e. the frequency-dependent gain in insertion loss compared to an equally high, fully reflective straight barrier was used as a basis for the correction functions. Linear as well as polynomial models were compared yielding a polynomial of third degree in the source and fourth degree in the target angle as the best model. Effects on the error using uniform sampling in the target angle instead of a uniform receiver grid as a basis for the correction functions are also investigated. Furthermore, wide-band efficiencies based on standardized traffic emission spectra are calculated showing small errors compared to single-band errors, in particular in the high-frequency range. A linear interpolation scheme is suggested to deal with barriers having dimensions not simulated in this work. [ABSTRACT FROM AUTHOR]
Details
- Language :
- English
- ISSN :
- 0003682X
- Volume :
- 102
- Database :
- Academic Search Index
- Journal :
- Applied Acoustics
- Publication Type :
- Academic Journal
- Accession number :
- 110511401
- Full Text :
- https://doi.org/10.1016/j.apacoust.2015.09.009