Exonuclease-Catalyzed Target Recycling Amplification and Immobilization-free Electrochemical Aptasensor.

A simple, sensitive, and selective immobilization-free electrochemical aptasensor had been developed which combines the advantages of the discrimination of the aggregation of long and short DNA on a negatively charged indium tin oxide (ITO) electrode, high selectivity of the aptamer, and high efficiency of exonuclease-catalyzed target recycling amplification. Ochratoxin A (OTA), a type of mycotoxin, has been chosen as the model target. Methylene blue (MB) labeled probe DNA had been hybridized with the OTA aptamer first, which cannot diffuse freely to the negative charged ITO electrode surface due to the repulsion of the negative charges, since the hybridized DNA contains large negative charges. In the presence of target (OTA), the aptamer prefers to form an OTA--aptamer complex in lieu of an aptamer--DNA duplex, which results in the dissociation of probe DNA from the probe DNA--aptamer complex The released probe DNA could be digested into mononucleotides, including a MB-labeled electroactive mononucleotide (eT), due to the employment of the Recjf exonuclease, a single-stranded DNA specific exonuclease. Since the eT contains little negative charge, it can difiuse easily to the negative charged ITO electrode surface, which results in the enhanced electrochemical response detected. At the same time, the aptamer in the OTA--aptamer complex can be digested by Recjf exonuclease also to liberate the target, which can participate in the next reaction cycling and realize the electrochemical signal amplification. Based on this strategy, an ultrasensitive homogeneous immobilization-free electrochemical aptasensor for OTA can be developed with a low detection limit (LOD) of 0.004 ng mL-1 (S/N = 3). The proposed biosensor combines the advantages of the simplicity of immobilization-free homogeneous ITO based electrochemical determination, high efficiency of exonuclease-catalyzed target recycling, and high selectivity of the aptamer. The fabricated biosensor has been applied to detect OTA in real samples with satisfactory results. The same strategy can be applied to develop biosensors for diverse targets. [ABSTRACT FROM AUTHOR]