Effects of cambers on gliding and hovering performance of corrugated dragonfly airfoils.

Purpose – The purpose of this paper is to explore the effects of the camber on gliding and hovering performance of two-dimensional corrugated airfoils. While the flying mechanism of natural flyers remains a myth up to nowadays, the simulation serves as a minor step toward understanding the steady and unsteady aerodynamics of the dragonfly flight. Design/methodology/approach – The lattice Boltzmann method is used to simulate the flow past the cambered corrugated dragonfly airfoil at low Reynolds numbers. For gliding flight, the maximum camber, the distance of the location of maximum camber point from the leading edge and Reynolds number are regarded as control variables; for hovering flight, the maximum camber, the flapping amplitude and trajectory are considered as control variables. Then corresponding simulations are performed to evaluate the implications of these factors. Findings – Greater gliding ratio can be reached by increasing the maximum camber of the dragonfly wing section. When the location of the maximum camber moves backward along the wing chord, large scale flow separation can be delayed. These two effects result in better gliding performances. For hovering performances, it is found that for different flapping amplitudes along an inclined plane, the horizontal force exerted on the airfoils increases with the camber, and the drag growths first but then drops. It is also found that the elliptic flapping trajectory is most sensitive to the camber of the cambered corrugated dragonfly wing section. Originality/value – The effects of the camber on gliding and hovering performance of the cambered dragonfly wing section are explored in detail. The data obtained can be helpful when designing micro aerial vehicles. [ABSTRACT FROM AUTHOR]