Experimental investigation of photoresist etching by kHz AC atmospheric pressure plasma jet.

In this study, the mechanism of the photoresist (PR) etching by means of a kHz AC atmospheric pressure plasma jet (APPJ) is investigated. The scanning electron (SEM) and the polarizing microscope are used to perform the surface analysis, and the mechanical profilometry is applied to diagnose the etch rate. The results show that granulated structure with numerous microparticles appears at the substrate surface after APPJ treatment, and the etch rate in the etch center is the fastest and gradually slows down to the edge of etch region. In addition, the pin-ring electrode APPJ has the highest etch rate at but easy to damage the Si wafer, the double-ring APPJ is the most stable but requires long time to achieve the ideal etch result, and the etch rate and the etch result of the multi-electrode APPJ fall in between. Ar APPJ had much higher PR etch rate and more irregular etch trace than He APPJ. It is speculated that Ar APPJ is more energetic and effective in transferring reactive species to the PR surface. It is also observed that the effective etch area initially increases and then decreases as plasma jet outlet to the PR surface distance increases. [ABSTRACT FROM AUTHOR]