Modeling of ash deposition in a pulverized-coal boiler by direct simulation Monte Carlo method.

In this paper, a mathematical model of the fly ash deposition in a 660 MW supercritical once-through boiler was developed. The mechanism of particle-particle and particle-wall collisions has been considered. Particle collision is modeled by a direct simulation Monte Carlo (DSMC) method. Three submodels (impaction, thermophoresis, and sticking) were included in the mathematical model. In the ash deposition model, the critical velocity model was used to calculate the ash sticking rate during initial deposition, and the viscosity model was used for the outer layer deposition. An ash deposition probe was inserted into the peephole and ash deposits were collected. The morphology of these samples was analyzed using SEM. The deposit thickness and the distributions of adhesion particle size were obtained by mathematical model. The mean deposit thickness calculated by the DSMC method agreed with the value measured by the ash deposition probe with the relative error within 3.79%. The simulation results show that the deposition inner layer consists of fine particles less than 10 μm in size and sticky fine particles were selectively captured during the initial deposition stage. The DSMC method may be a practical alternative for studies of ash deposit formation. [ABSTRACT FROM AUTHOR]