Compensating the effect of temperature variation on dielectric response of oil-paper insulation used in power transformers.

Being an offline measurement technique, Polarization Depolarization Current (PDC) data is conventionally measured after the oil-paper insulation of the equipment reaches thermal equilibrium. Depending on the condition of the insulation, PDC data measurement time typically ranges from several minutes to few hours. It is understood that atmospheric conditions controls the value of ambient temperature. During field measurement, these conditions may not remain constant throughout the PDC recording process. Variation in ambient temperature disturbs the thermal equilibrium that the equipment may have attained at the start of the measurement procedure. Such a condition invariably affects the recorded dielectric response data. However, methods that are available for analyzing relaxation current assume that temperature equilibrium is maintained throughout the measurement period. Results presented in this paper show that dielectric response data is indeed affected if the ambient temperature increases/decreases monotonically. A method is also proposed in this paper using which the effect of such temperature variation on the recorded relaxation current data can be eliminated. This also ensures correct interpretation of PDC data for condition assessment. Analysis presented shows that the value of the equilibrium temperature does not affect the performance of the proposed technique. The applicability of the proposed methodology is first tested on laboratory samples. Thereafter, it is applied to data collected from a real life power transformer. [ABSTRACT FROM AUTHOR]