Design and Selective Laser Sintering of complex porous polyamide mould for pressure slip casting.

A novel method to prepare porous resin mould for pressure slip casting was proposed by using Selective Laser Sintering (SLS), which is one of Additive Manufacturing (AM) processes. The mixture of polyamide and salt (NaCl) were designed as raw materials, in which polyamide acted as matrix material and NaCl as pore-foaming agent. To investigate the feasibility of the pressure slip casting with the mould, the compressive strength and porosity of the porous specimens were measured. Experiments showed a compressive strength of 7.19 MPa and an elastic modulus of 32.26 MPa were reached. Meanwhile, the porosity of the specimens was 59.75%, and the aperture concentrated in 25–75 μm. The water permeability was verified and the maximum permeability reached to 0.921 mL/(mm 2 ·s). Pressure slip casting with porcelain slurry was performed using SLS porous specimens as the mould. Results showed the moisture content of the green body was about 23% and the relative density was 68.4%–74.1%. At last, a green body of whiteware with complex surface was prepared by the proposed method to demonstrate the feasibility of pressure slip casting with this mould. This method could be used in porcelain industry to realize rapid development of new products and customized production with further improvements. [ABSTRACT FROM AUTHOR]