Temporal evolution of precipitates in multicomponent Al–6Mg–9Si–10Cu–10Zn–3Ni alloy studied by complementary experimental methods.

The precipitation behavior of the multicomponent Al–6Mg–9Si–10Cu–10Zn–3Ni (wt%) alloy was investigated during artificial aging at 120 °C through complementary experimental methods including hardness and electrical resistivity measurements, compression testing, differential scanning calorimetry, and transmission electron microscopy. The solution treatment causes the dissolution of the preexisting θ-Al 2 Cu and hcp Zn phases, thereby increasing the concentrations of Zn and Cu species in the Al matrix. During aging, two resistivity peaks (I R , II R ) become visible followed by the appearance of the related hardness peaks (I H , II H ). Spherical Guinier-Preston (GP) zones are formed first and then subsequently transformed into ellipsoidal GP zones. The former process results in the appearance of the I R peak, while the latter process produces the I H peak. During transformation of the ellipsoidal GP zones to hcp Zn, GPI zones are additionally formed, leading to the appearance of II R . The following transformation of the GPI zones into the θ''-Al 3 Cu phase leads to the appearance of the II H peak. Both the ellipsoidal GP zones and hcp Zn phases contain large quantities of Cu atoms, while the θ''-Al 3 Cu phase does not have any Zn atoms. Based on these insights into the structural and chemical compositional evolution of complex precipitates, the strengthening mechanism of the multicomponent alloy during aging has been established. [ABSTRACT FROM AUTHOR]