Back to Search Start Over

Effect of pulverized fuel ash and CO2 curing on the water resistance of magnesium oxychloride cement (MOC).

Authors :
He, Pingping
Poon, Chi Sun
Tsang, Daniel C.W.
Source :
Cement & Concrete Research. Jul2017, Vol. 97, p115-122. 8p.
Publication Year :
2017

Abstract

This paper presents a study on the use of pulverized fuel ash (PFA) to improve the water resistance of magnesium oxychloride cement (MOC). Strength retention coefficients and volume stability were tested to evaluate the water resistance of MOC, in which the addition of PFA resulted in a remarkable improvement. The characterization of hydration products before and after water immersion was carried out using quantitative X-ray diffraction (QXRD), thermogravimetric (TG), Fourier-transformed infrared spectroscopy (FTIR) and scanning electron microscope (SEM). With the Q-XRD analysis, it was shown that the addition of PFA could result in the great increase of the amount of amorphous phase during air curing. This amorphous gel was identified as a mixture of magnesium-chloride-silicate-hydrate gel (M-Cl-S-H gel) and magnesium-chloride-hydrate gel (M-Cl-H gel) by elemental mapping scanning. It suggested that PFA could not only react with MOC to form M-Cl-S-H gel, but also change the morphology of magnesium oxychloride. The generation of insoluble M-Cl-S-H gel and M-Cl-H gel and densification of the microstructure contributed to the improvement of the water resistance of MOC. The MOC mortar expanded during air curing due to the hydration of excess MgO. Water immersion led to more expansion of MOC mortar as a result of the continuously hydration of excess MgO and the formation of Mg(OH) 2 . Adding PFA could increase the expansion of MOC mortar during air curing, which may because the amorphous gel could remain more water and benefit to the hydration of MgO. While, the addition of PFA could decrease the expansion of cement mortar during water immersion perhaps due to the reduction of the content of excess MgO and the insoluble amorphous-gel-layer that protect the MgO from hydration. Moreover, CO 2 curing could further improve the performance of the PFA-blended MOC due to the formation of a higher content of amorphous gel. [ABSTRACT FROM AUTHOR]

Details

Language :
English
ISSN :
00088846
Volume :
97
Database :
Academic Search Index
Journal :
Cement & Concrete Research
Publication Type :
Academic Journal
Accession number :
122969585
Full Text :
https://doi.org/10.1016/j.cemconres.2017.03.005