Boron sources as sintering additives for alumina-based refractory castables.

Sintering additives (SA) have great potential to be used in refractories to enhance their thermo-mechanical properties at intermediate temperatures (600–1200 °C). Boron-based compounds are pointed out as suitable options for this purpose as they undergo phase transformations (i.e., decomposition, oxidation, etc.) at relatively low temperatures, which may lead to boron-rich liquid phase generation and transient liquid phase sintering. Considering these aspects, the present study aims to evaluate the role of five different SA [boron oxide (B 2 O 3 ), boric acid (H 3 BO 3 ), sodium borosilicate (BS), magnesium borate (BM) and boron carbide (B 4 C)] when 0.5, 1.0 and 2.0 wt% of these materials were added to alumina-based castable compositions bonded with hydratable alumina. Flowability, apparent porosity, XRD, hot elastic modulus, thermal shock resistance and mechanical tests were carried out in order to identify whether (i) transient liquid phase sintering would be favored in these refractories, and (ii) at which temperature range such compositions might be submitted during service and still present an improved performance when compared to an additive-free castable (reference). Based on the results, incorporating boron oxide into the alumina-based castables was not recommended as this hygroscopic material reduced the flowability of the compositions, preventing a suitable preparation of the samples. The other boron-containing compounds could be directly added to the high-alumina mixtures without resulting in major changes in their processing steps. Nevertheless, the paper highlights the importance of selecting a proper SA source and optimizing its content in the castable composition as these parameters may affect its overall rheology and thermo-mechanical properties. The formulations containing 0.5 wt% of H 3 BO 3 or B 4 C, 1 wt% of sodium borosilicate and 2 wt% of magnesium borate presented enhanced erosion and thermal shock resistances and hot mechanical strength at 1000 °C and 1200 °C, which makes them potential refractory castables to be used in petrochemical and aluminum industries. [ABSTRACT FROM AUTHOR]