Rotor Temperature Estimation in Doubly-Fed Induction Machines Using Rotating High-Frequency Signal Injection.

Thermal monitoring is a common feature in most electric machine drives since thermal overloading is one of the most common causes of motor failures. Contact-type sensors are normally used to measure the stator temperature in electric machines. However, use of this type of sensor is not advisable in the rotor as it requires cabling to a rotating part or the use of a wireless transmission system. Consequently, measurement of the rotor temperature is not easy in practice and is not normally implemented in standard machines. An alternative to rotor temperature measurement is rotor temperature estimation. To date, only thermal models have been used for rotor temperature estimation in doubly-fed induction machines (DFIMs). This paper proposes rotor temperature estimation in DFIMs using high-frequency signal injection. The proposed method estimates the rotor temperature from the rotor high frequency resistance, which is a function of the rotor windings temperature. The method does not interfere with the normal operation of the drive and can be implemented in existing DFIM drives without requiring additional hardware. [ABSTRACT FROM AUTHOR]